Blue screens during playback of Skyrim: CRITICAL_OBJECT_TERMINATION (f4)

Similar Questions

• HP PRO 3405 series MT * blue screen during installation *.

  Hello

  I tried to install Windows XP on this PC, but I get the blue screen during the installation. Instead, with windows 8 I can install.

  I need drive for controller? (F6 at startup)

  Hello:

  See if these drivers work.

  You will need a USB floppy drive to install on the line of F6. A USB flash drive does not work.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 12454 & prodSeriesId = 4169006 & prodNameId = 4169007 & swEnvOID = 1093 & swLang = 13 & mode = 2 & taskId = 135 & swItem = vc-74977-1

  Now you have to extract the real drivers, you must copy and paste to your floppy drive.

  Download the free 7-zip file and use it to extract the files in the exe file you downloaded above.

  http://7-zip.org/download.html

  After having extracted the file, you will find the drivers in the folder of the driver.

  Open this folder and copy and paste the drivers inside this folder on your floppy drive.

  If this does not work, go into the BIOS and change sata from AHCI to IDE emulation and install windows like that.

  Then try to manually install the driver sata ahci by a manual update of the drive controller in Device Manager.

  If you install, you restart and back emulation sata AHCI in the BIOS, so the hard drive works better it will be in IDE mode.

• Please help - Virus? Can not enable automatic updates and blue screens during the virus scan

  Hi, I think I might have a virus.  Here are the symptoms:

  • I can't activate the automatic updates
  • MS Security Essentials blue-screens in an analysis complete (I can do a quick scan)
  • I was able to run a quick scan of the Scanner for MS without problem.
  • When you open Internet Explorer I always get "stopped unexpectedly" and it gives me a choice to go to the previous page or home page
  • I have AVG Antivirus but it was blue-screening during a scan, so I uninstalled and installed MS Security Essentials
  • I ran a chkdsk /r and no errors not found on my hard drive

  I searched the internet and I tried a few suggestions, but so far I have not made progress.

  I am running XP SP3 and I don't remember disabling the automatic updates.

  I am open to any suggestions, just some guidelines at this stage.

  Hello

  ·         What exactly happens when you try to activate the automatic update?

  ·         You receive no error message from error code?

  I suggest to reset the Windows Update components and check if the problem persists. Visit the following link and click on Fixit.

   

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  You can also view the article mentioned for more information below:

  You can not turn on automatic updates on a Windows XP Service Pack 2 computer

  http://support.Microsoft.com/kb/916261

   

  Note: The article also applies to Windows XP service pack 3.

  Let us know if it helps.

• Installation of Windows XP Pro on a new configuration of the motherboard. Installation locks a blue screen during the installation of devices. Assistance from ms said why, but not healing. Anyone know an answer?

  My old motherboard gave the soul, and I have now installed a Gigabyte GA-880GM-UD2H with an AMD Phenom 6 processor and 4 GB of RAM.  The 2 HD is a Maxtor Sata 1 300 GB ones. One is divided into 2 equal partitions, the other has a single partition. During installation, it hangs at a blue screen during the "installing devices" and towards the end of the indicator. Removing everything except the essential, makes no difference.
  With 0x0000000A IRQL_NOT_LESS_OR_EQUAL error message States. This rising on the MS, it indicates:-stop this message indicates that a kernel-mode process or driver tried to access a memory address in which he was not allowed to access. The most common cause of this error is a bad or corrupted pointer that refers to an incorrect location in the memory. A pointer is a variable used by a program to designate a block of memory. If the variable has an incorrect value, the program tries to access memory that it shouldn't. When this occurs in a user mode application, it generates an access violation. When it occurs in kernel mode, it generates a STOP 0x0000000A messages. If you encounter this error during the upgrade to a newer version of Windows, it could be caused by a device driver, system service, a virus scanner, or backup tool which is not compatible with the new version.

  I start with new parts, except the DVD & HDs drive and with a start-up Virgin & installation process. I'm not upgraded to the BONE, that's the one I was using before the reconstruction. The supplier of components, suspected of defective parts and cooperated in the provision of a set of replacement of parts, but there is no change in the problem.

  Can someone explain what I can do to start?   Thank you!

  Hello

  See the article below which might help you.

  You receive an error message "Stop 0x0000000A" in Windows XP
  http://support.Microsoft.com/kb/314063

• Blue screen during windows of note

  Hello

  I tried to run the windows on my laptop, the vaio x Win7 with driver intel GMA500. When I got a blue screen during the process.

  The main line was PILOT NOT LESS NOT EQUAL.

  I should have the dump file, but I can't locate.

  Thanks in advance for any help.

  You may need to upgrade your Intel® Graphics Media Accelerator 500 card to something more robust. The updated driver for the device was scheduled for 2010.

• Re: Satellite L650-165 - blue screen during the video playback or games

  Hello

  In October, I bought my L650-165. However, since then, I was faced with the blue screen of death. This happens when either video playback, streaming video or play Football Manager 2011 (video game).

  I think that my problems are all the graphics card related. However, I am really at a loss. I've always used Tosh laptop computers but this problem starts to grate. I keep coming back to my trusty 5 years Equium!

  I'm not that great with Windows 7, so I would appreciate any pointers or possible solutions.

  Thank you

  Cess

  Hello

  I had the same problem with my a500 due to a graphics card driver. Try to update:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

• Blue screen during installation of Windows XP on HP touchsmart 7320

  I have a HP touchsmart 7320 with Windows 7 Professional 64-bit pre-installed.

  I have to install Windows XP (32 bit) next to Windows 7, so that I can run a costly professional application which meets the incompatibility issues with Windows 7.

  Compatibility mode makes no difference. Virtual PC and XP mode are broken during the installation of the application. So its a way for me to have a dual-boot with Windows 7 ande Windows XP machine.

  When I am installing Windows XP (all versions-family, professional, 32 or 64-bit with original CD always) gives a blue screen with strange characters and the following STOP message:

  | STOP 0X0000007E
  
  (0xc0000005, 0xf748e0bf, 0xf78da208, 0xf78d9f08)
  
  PCI.sys - address f748e0bf base at f7487000 datestamp 36d855c

  I did a new Windows XP installation CD using nLite, "slipstreaming" of Service Pack 2 and AHCI SATA drivers I found here and they are proposed by this guide.

  That seems to work for awhile, because the installation process went further. It passes the point where she was already giving the blue screen, but it gives blue screen in a later stage of the installation process and one other STOP message which is now:

  Hello:

  I have another solution for you.

  First, go to your Windows 7 installation and in Device Manager, click on IDE ATA/ATAPI controllers section.

  Please confirm that you have the Intel (r) Desktop/Workstation/Server Express Chipset SATA AHCI Controller.

  If it's not the ACHI SATA controller you have, thanks for posting what you have.

  Now, here is another method to install XP.

  Go into your BIOS. Go to the menu of storage options. Change your SATA of ACHI to IDE emulation mode. Save the configuration at this time by pressing the F10 key and save your settings again when you leave.

  Now XP must install.

  After XP is installed, please share back and I'll give you the instructions step by step to load the post SATA ACHI driver XP installation, so you can change your return to ACHI BIOS setting, so that you can dual boot your machine.

  Currently, only XP will start with the value IDE BIOS. With the ACHI BIOS value, only W7 will start. That's why we need to load the drivers for XP achi sata once you have it installed.

  I think that we can find all the XP drivers, you need to as well.

  Paul

• Blue screen during the installation of windows

  I was formatting my laptop, when the new windows (windows xp) is installed and during his stops starting and give a blue screen with the error, and automatically restart and the same breed bluse screen and restart. I tried to open the safe mode, but its revealing windows is not completely installed please pick up again. I tried four times back again with the same problem. Please help me...

  Hi AhmadDimassi,

  ·         What is the error it fails with?

  Check to see if the following is useful.

  Method 1: Unplug non-essential devices from the computer and restart the computer.

  Method 2: Try to select disable automatic system failure reboot since the options of start menu advanced to know the Blue error screen.

  a. restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.

  b. use the arrows to choose to turn off the automatic restart in the event of system failure in the Advanced Options of Windows Start Menu and press ENTER.

  Method 3: Check drive for errors.

  Description of the Windows XP Recovery Console for advanced users

  Microsoft Windows XP - Chkdsk

• Error on blue screen during windows startup - LeAPC_INDEX_MISMATCHErreur

  When starting my pc I get a blue error screen saying LeAPC_INDEX_MISMATCHErreur, my pc restarts and I get error when loading of the readers saying: 3rd master ST31000528AS CC38 ultra DMA mode 6 S.M.A.R.T capable but failed the control. 3rd drive hard master S.M.A.R.T command failed, press F1 continue.

  I also have this error report for blue screen event.

  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 2057

  More information about the problem:
  BCCode: 1
  BCP1: 85212696
  BCP2: 00000000
  BCP3: 0000FFFE
  BCP4: 00000000
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\Mini020712-01.dmp
  C:\Users\Kiro\AppData\Local\Temp\WER-278446-0.SysData.XML
  C:\Users\Kiro\AppData\Local\Temp\WER254B.tmp.version.txt

  Read our privacy statement:
    http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Is someone can you please tell me what has gone wrong, this has happened more than 3 times now.

  Hello

  What to do if Windows does not start correctly
  http://Windows.Microsoft.com/en-US/Windows-Vista/What-to-do-if-Windows-wont-START-correctly#.

  Pick up the pieces after a computer crash
  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  For the methods of troubleshooting blue screen using BlueScreenView and MyEventViewer see my answers
  If this thread - top 3 RESPONSES (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  =============================================================

  BCCode: 01 0x00000001

  The most common cause of this Bug_Check is drivers then use the methods in the next message
  updated the BIOS and drivers major. If necessary we can tell you how to run the Verifier however
  with Windows Vista, it's a good idea to update all the main drivers as the maturation process is
  still in force. (See how to update the drivers and run driver verifier in the next message).

  --------------------------------------------------------------------------------------------------------------

  Bug Check 0x1: LeAPC_INDEX_MISMATCHErreur

  LeAPC_INDEX_MISMATCHErreur bug control has a value of 0x00000001. This indicates that there is an inconsistency in the index of State APC.

  Important information if you have received a STOP Code

  If you have received a blue screen error, or stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  The following actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  LeAPC_INDEX_MISMATCHErreur settings

  The following settings are displayed on the blue screen.

  Parameter	Description
  1	The address of the system (system call) function or a worker routine.
  2	The value of the field ApcStateIndex of the current thread.
  3	The value of the field CombinedApcDisable of the current thread. This field consists of two separate 16-bit fields: (thread-> SpecialApcDisable < 16)=""> wire-> KernelApcDisable.)
  4	Type (system call 0-, 1 - routine worker) of the call.

  Cause

  The most common cause of this bug check is when a system file or driver has a sequence are mismatched calls to deactivate and reactivate the APCs. The data key item is theThread-> CombinedApcDisable field. The CombinedApcDisable field is composed of two separate 16-bit fields: SpecialApcDisable and KernelApcDisable. A negative value of field indicates that a driver has disabled APC normal or special (respectively) without them the reactivation. A positive value indicates that a pilot has allowed normal TTB or special too many times.

  BCCode: 01 0x00000001<-- read="" this="">
  http://www.faultwire.com/solutions-fatal_error/APC-index-mismatch-0x00000001-* 1016.html

  ====================================================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Blue screen during the startup or shutdown

  I have windows vista home premium.sometimes during startup or during shutdown, a blue screen appears for a very short time and the restarts.from of the computer, what I have seen during this short period his written dumping physical memory, etc as something is written on my BIOS.do I need to update my BIOS version or is there any other problem? Please answer soon.thanks.

  You can download the contents of the c:\windows\minidump on SkyDrive and provide a link?

  Consider the following general guidelines for dealing with bluescreens.

  Consider running chkdsk on all partitions.  Leave complete chkdsk on each partition and see if that helps.

  Also consider running SFC/scannow.

  If you start in safe mode, do you still feel bugs? What if you do a clean boot, or boot device?

  Consider the memory with memtest86 or Windows Memory Diagnostic test. Note that memory that pass the tests isn't necessarily good memory - he not only failed a review.  Examine systematically to eliminate the system RAM - run with a few modules for awhile and see how things are going. Then try the other modules.

  Other common suggestions include ensuring drivers are up to date, but also to ensure that you use the latest version of the BIOS.

  It may be useful to use the driver verifier.  To activate the... Driver Verifier start-> verifier.exe-> OK-> create standard settings-> next-> driver select the names to a list-> next-> sort by provider-> select all other Microsoft drivers-> finish and OK your way out of the dialog box.

  Then restart and use the system as you normally and wait for a problem.  In case the system does not completely start after activation of the Verifier, boot mode safe and run driver verifier and tell him to remove the changes.

  Wait for a bugcheck occurs after you have enabled the auditor as described, and then download the dump on your SkyDrive and provide a link.

• R310 Gets a blue screen during the installation

  I have a R310 failed with a blue screen. I tried to boot from the OS from Dell disk and do a clean install on the original hard drive and a new hard drive.

  Installation works normally but gets a blue screen at 10% or 20% (random) during file extraction.

  What is the RAID controller that is faulty

  any suggestions?

  THX

  Gavincr001.

  What is the stop code that is displayed on the blue screen? Also, you can check if the server is updated in the BIOS, iDrac, controller of life cycle, as well as the raid controller in the server? If some of them get obsolete now, it can cause stability problems. Let me know what the stop code is that you see and I will be able to better understand what is causing the problem. In addition, what is the OS you are using?

  Let me know.

• Blue screen during the Instalation of finishing

  Hey there,

  I tried to install Windows 7Pro on an old mobile phone to society with a free HARD drive.

  Everything worked up until the computer restarts automatically. During the process of "finish installation", a blue screen appears all the time and the computer restarts. the installation fails every time after that.

  The laptop is a Dell Latitude E6520 and the BIOS is updated to the last A19.

  hoping to get help,

  Thanks for the replies

  Its possible your installation media can be damaged or scratched.

  If you have any non essential devices connected to the computer, they might interfere with installation.

  What kind of way is to install Windows 7 from USB or DVD?

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

• Blue screen during the installation of windows 7

  Hi guys, this is my first question. I have a problem during the installation of windows. A blue screen saying is displayed "STOP: c000021a {fatal system error}.

  The initial session process or the process of the finished system unexpectedly with a status of 0 x 00000000 (0 xC0000001 0x001003f0).

  The system stopped"I can't do anything else than the computer shutdown. Please help me

  Could you provide your system specifications?

  Are the upgrade from a previous version of Windows or to do a clean installation?

  This is usually caused by hardware or software that is not compatible with Windows 7. If you have this problem, follow these steps:

  Uninstall all antivirus software, and then restart your computer. Don't forget to enable antivirus software after you install Windows.

  If the installation fails again, it may be a hardware incompatibility problem. Go to the Windows 7 Upgrade Advisor on the Microsoft website to see if your computer can run Windows 7.

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

  If the computer still stops responding during Setup, contact your manufacturer computer or your retailer.

• Boot camp Win 7 0 x 34 blue screen during windows startup after the restoration with the image of the system.

  The hard drive on the Macbook pro was repartioned, all the boot camp and other drivers updated and Windows installed from the installation DVD. All the Windows updates available from 2012 (installation disc is 2012) until today have been installed and Boot camp 5.1 with all its drivers installed. Restoration was launched with an image of an external hard drive and a system repair disc system. Once Windows loads after the login screen, it crashes. A blue screen appears with the error code 0 x 00000034 and mention cache_manager... Windows restarts by itself and I can only use it in safe mode, which means that I can't download or install upgrades or programs.

  Analyze the dmp file since the first crash with Windows debugging tool showed that the problem seems to lie with

  AppleHFS.sys and svchost.exe with Bug Check 34 {107, ffffffffc0000420, 0, 0}.

  Here is the link to the complete analysis of the dmp for details file:

  https://1drv.Ms/u/s! AuzUtP_j9nLagwWWqWUTre4qNYmu

  Thank you very much in advance for your help

  Moschtermeedchen

  AppleHFS.sys/AppleMNT.sys are used to allow access to filesystems OSX JHFS +. Restoring Windows on Mac backups can be painful. If you have already fresh install of W7 on the internal drive, try the restore without installing any driver BC. Please be aware that such a restore is not aware of the partitions on your internal drive and can erase your internal drive.

• Satellite C660 becomes blue screen on playback of videos

  Hello

  My Toshiba laptop windows7 64-bit (model name: Satellite C660-249-Ref.: PSC1GE) still get a blue screen when playing movies / youtube / DVD.
  I have same thousands of times reinstall portable mine and put the factory by Windows startup settings.
  I also have the latest Adobe installed on it and display drivers installed on AMD site and the homepage of Toshiba.

  I'm sick of it.

  Sincerely,

  RRAP Singh

  Graphics card can be the troublemaker.
  Have you tested the feature play games?
  It will be interesting to know if the same problem occurs again and again.