Blurry display after installing XP Pro

Similar Questions

• 3110CT no sound after installing XP Pro

  I am a novice when it comes to laptops, so here's the problem: my 3110 ct no sound after installing XP Pro. Had no noise when I bought it with another operating system, the report says no audio devices installed.

  Does this mean that I have to make a chip for laptop or a driver, I need & where can I find the driver or the part for this.

  Help, please.

  Usually, if the audio driver is not installed you will get no sound, but also a yellow exclamation point must appear in Device Manager.

  If the sound card chip is damage, I imagine that you will not be able to see the yellow exclamation point belonging to the sound card in Device Manager.

  You bought this Portege as a second hand unit. Am I wrong?
  So maybe the sound card is faulty.

  The computer uses an ES1978 ESS (Maestro-2E) and sound chip ES1918.
  Check if you can find an audio driver XP in internet.

• Satellite A60 - lack of drivers after installing WXP Pro

  I installed XP Pro instead of XP home with the PC.
  I can't upgrade because of the other language.
  I downloaded all the drivers of your site, but after insttallation I still have a problem with the FireWire (lack of driver).
  Then I also checked that the drivers of toshiba sure power are missing too.
  What can I do?
  Best regards

  Hello

  on the driver download site, you can download the installation instructions. Follow this order of installation. Toshiba Power Saver utility can be downloaded from the pilot site, too.

  You can also use your CD tools & utilities. There you can find all the programs and drivers for XP. Doesn't matter if it's home or teacher, the drivers are the same. But maybe some drivers from the download site are updated to a newer version.

  Good bye

• Modem does not not after installing XP Pro

  I just installed XP PRO, including service pack 2, from scratch, on a Satellite Pro A10. I downloaded the latest drivers for modem from this site and install them. (several times). All anything will do, when querying the modem diagnostics tab all that I get is a message indicating that the com port cannot be opened. Is the modem on COM3. Can anyone help please? I tried the suggestions of the other posts, but nothing helps.

  [Edited by: admin on 23 May 05 21:08]

  Hello

  I'm not sure but I think that your camera comes with SP1. It is possible that some hardware components are on strike after installation of SP2. Try to reinstall the sound driver.

  Check it please this interesting page http://modemsite.com/56k/xptip.asp.

• Can't find wlan after installing xp pro

  now I can't find my wireless settings only the local network settings to install xp pro on dell d630

  Try to go to services and activate the automatic configuration Service and check if that helps. If that does not do it, see the link below for troubleshooting tips.

  http://support.Microsoft.com/kb/870702

  Since it is a new installation, dell recommends that drivers be installed in any particular order for the system to function properly.

  Order of installation of the Dell drivers.

  http://support.Dell.com/support/topics/global.aspx/support/downloads/en/driver_install_order?c=us&l=en&s=Gen& ~ lt = print & DoNotRedirect = y

  Drivers search by serial number.

  http://www.Dell.com/support/Home/US/en/19/?~CK_=_mn

• Desktop Window Manager has stopped working after installing Defender Pro 2012 5 in 1

  Hello

  My father has a Windows Vista. It works very well. Until we installed Defender Pro 2012 5 in 1,

  It was a bit slow... the screen flickers of its lights for a few seconds every 10 minutes, I get this... I already have contact Defender Pro, and they said that it was not their fault.

  Help, please!

  DESKTOP WINDOW MANAGER HAS STOPPED WORKING
  Windows can check online for a solution to the problem

  -> online and are looking for a solution (recommended)
  -> close

  APPCRASH
  Application name: Dwm.exe
  Application version: 6.0.6002.18005
  Application timestamp: 49e02696
  Fault Module name: ntdll.dll
  Fault Module Version: 6.0.6002.18327
  Timestamp of Module error: 4cb74dd3
  Exception code: 80000003
  Exception offset: 0000000000045f00
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033
  Additional information 1: 0fef
  More information 2: 0d8b4b37a0c1e529a7398b6615cc3528
  Additional information 3: f196
  Additional information 4: acf765d48a0657c8822f379a6b5f3b91

  Read our privacy statement:
    http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Sorry to tell you,

  I already solved the problem.

  Just to let you know, I buy the product, because

  I used the free and they don't really work (IN MY OPINION).

  Anyone has this PROBLEM (appcrash)

  Go to start

  Click on Control Panel

  go to appearance and personalization

  Click on appearance color of windows.

  then click on settings in the appearance of progress.

  under the gaze of point for the theme of basic or something like that.

  Want more info on Dwm.exe?

  Click here-> http://www.howtogeek.com/howto/windows-vista/what-is-dwmexe-and-why-is-it-running/

• I get error code 0 x 80070035 applications after installing Office Pro Plus 2010

  Original title: install Office Pro Plus 2010 in error code 0 x 80070035

  Hello

  I installed office pro plus 2010 and applications, I get this error message. I can not save the e-mail settings outlook, using word, excel etc. It just keeps popping up - no other problems with the operating system. Running vista home

  Any suggestions? Thank you

  Thank you. I did this and then ran the installation repair and now works fine.

• NB550D-111 - can't change the display resolution after installing Win7 Pro

  Hi guys,.

  After you install a clean install of Windows 7 Professional I can't get resolution, more than 800 x 600.
  I went to the section of the driver and installed the good display driver for my NB550D-111: version 8.812.2.2 of the displaydriver.

  After a reboot, still nothing happens and I can't change the resolution.
  Trying to open the Catalyst Control Center results in nothing: I can't seem to open it.

  I spent hours and hours trying to solve this problem, but need help at the moment.

  See you soon,.

  Tim

  NB550D-111 has AMD HD graphics card 6250 and the same Satellite C660D (PSC1YE) or Satellite L775D (PSK5PE) then you can try using the display drivers for these laptops.

  I n t have experience with NBs and cannot confirm this will help, but you can try it and send feedback.

• Qosmio F10-136 - no sound after installing WXP Pro

  I reformatted my hard drive using the recovery CD, after which, I installed Windows XP Pro. Originally, it was Windows Home Edition that was previously installed. Now, the sound is missing and some components more.

  I tried to download the audio drivers from the Web from Toshiba support site but it didn t work. When executing the installation of the software Sound Max of Analog Devices, Inc., a guest of error is displayed "driver not found, please reboot your computer and reinstall again". Can someone help me on this?
  Thank you.

  First of all buddy you need to update the XP to the last State. I mean to install the XP2 and all patches and fixes available!

  Then you must download all the available drivers, tools and utilities for XP and should install it in the right order.

  The right installation order is mentioned in the installation instructions txt file.

  XP audio driver Analog Devices Inc. v5.12.0.1.5160 is available on the page and it works for sure!

  Check it!

• Driver problem Intel 945GM display after installing Vista on A100 PSAA8

  After the upgrade to Vista on Satellite * 207-A100 PSAA8E-180049EN *, display adapter "* Mobile Intel (r) Express Chipset Family 945GM *" does not work. In Device Manager, it says "* this device cannot find enough free resources that it can use." (Code 12). " By using the Vista driver from Toshiba Web site and also tired last driver from the Intel Web site without result. Re-installed all the Vista drivers in the order recommended on the site Web of Toshiba. Also tried several removal and re-additons of the different drivers, nothing works.

  If anyone out there has the same model, I would be grateful if you could send a screenshot of Device Manager (reduced to display the secondary devices under main devices). Also a second snapshot of Device Manager, showing resources (Device Manager / View / resources by type). My e-mail address is: [email protected].

  Grateful for any other ideas or suggestions.

  Hi Rave

  Thanks for the comments!
  I'm really glad to hear that you have installed all the stuff according to document Instructions of facilities.

  Happy new year!

• 30 - Qosmio F-113: no sound after installing WinXP Pro

  I installed Windows XP Professional on my Qosmio F30-113 (preinstalled system is WinXP MCE).
  All devices work properly except for the audio card.
  It not there no sound anywhere, but in Device Manager, it seems, there is no problem with any device.

  I tried to install the audio driver (sound-qf30-xpmce - 51049460.zip) TOSHIBA-Center download - but after restarting Windows install tells me, that the current system doesn't support driver, which I am trying to install.

  What should I do? Which driver to use?

  Hello

  It's very strange. As far as I know that the driver can also be used with WXP Home and Pro. There is no difference. You are right on the sound card. Your laptop has an its SigmaTel STAC9200D card and the driver is SigmaTel HD Audio driver V5.10.4946.0.

  I don't know how did you install all the drivers, but I hope that you did this in the order of good facilities. The order of good facilities, you can find after downloading the install Instructions document.

• Satellite A80: No sound after installing XP Pro

  Hello

  Just upgraded my Satellite A80-115 from Windows XP home to Windows XP Pro SP2

  Download all the drivers for the A80 from the site and install. Everything works except for the audio driver, I have no sound coming from the speakers.

  Nothing is cut on the system.

  Realtek AC 97 Audio driver

  Tried the Patch KB888111 from microsoft but still no sound. It's driving me crazy...

  Please help me! 1

  Kind regards

  Ronald

  Post edited by: cono

  Perhaps the solution described in this thread might help:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=21110&MessageID=77805

  1. download Microsoft's KB835221 hotfix
  2. Remove "Audio device on High Definition Audio Bus"
  3. install KB835221
  4. reboot the system
  5 XP automatically detects devices
  6. after that you don't need, but you can install the realtek drivers

• Switch to native SATA after install WinXP Pro?

  I have a compaq presario C306us with a kind of chipset mobile Intel 940-family that is currently being displayed in the disk SATA controller device manager

  "Intel 82801GBM/GHM ICH7 - M family Serial ATA" showing a driver as provided by Intel, as of 23/05/2005, version 7.0.0.1020
  That all said, I'm not sure it's the right driver, or best driver for the device - it is extraordinarily difficult to determine what is right for this chipset [plethora of posts on the topic anywhere on the web].
  The system works with the disabled SATA, it means Compaq say 'Compatibility ATA Mode' :)
  Switching the bios "SATA" will result in bootloop.
  There are messages here and there on the tech forums that support there is a way to implement the system I have now it, point to a source for driver update driver install, install it, restart and go to the BIOS and switch to native and it should work.
  Such a position that seems well detailed is the following:
  http://www.blogger.com/comment.g?blogID=5958179945737198333&PostID=1655526364059940970&page=1&token=1311643213679
  SIW reports the northbridge as i940/943 and video shows i945GM
  HP publishes only a softpaq Intel Matrix Storage for this model, and he's wearing an older driver than what I currently loaded.
  HP has a manual on a similar model but sectors of this platform, which details the various solutions and workarounds for this problem.  The instructions after the fact are similar to the but not exactly that of the blogger above.
  I would move this little laptop to a SSD drive, but without solving this issue, it would be a bit of waste.
  I can't get this working and need help from someone more light I have.
  Please help if you can.

  for the sake of others who have this problem and get the same zero responses as I did, I will post the solution.

  Intel crashes their drivers in CAB files so that, in the case of this particular implementation, simply run the executable does not create a folder anywhere that includes all the necessary driver extracted and available files. to make things worse, the cab files are protected by Word and no one I know has the 'key '. so even if microsoft and other kind souls after a procedure to enable real SATA mode, we need to find the drivers.
  These drivers have been posted by some kind and knowledgeable on download.com soul.  This person obviously understood the catch22, extracted the drivers and their publication in a usable form there.
  for reasons that I don't understand, just go to the Device Manager, pulling up the pane driver SATA device and point the wizard to the necessary driver "update" the file on the hard drive will not accomplish the goal.  Instead, copy the files to a usb flash drive and point the wizard on this device to extract the files.  Once that is done, restart the system and immediately call setup/BIOS and SATA to legacy mode SATA mode switch.  Save and let the system startup normally.  When windows is in place and connected, it will finish the task of updating all the devices associated with the controller [in my case the ICH7-M].  Then, the system must be restarted once more for all changes to take effect.  You are finished.  Finally

• Satellite P100-286 with no display after installing drivers

  I reinstalled XP on my 286 P100, as I did a couple of times before and went about installing the XP drivers on the Toshiba site. I was installing video drivers when the screen went black. I assumed it was a regular part of the installation of the video driver, usually the screen goes black for a few seconds, but the screen remained black.

  I tried various commands on keyboard, but nothing has worked. So I restarted the laptop. Now, the display lights at all. I can't even an external monitor to show anything.

  Any advice would be appreciated.

  Hey,.

  Can you see photo when you in BIOS mode for example?

  If so, you should try to go into safe mode and remove the display driver. Maybe something was wrong due to the installation of the driver

• No display after installing linux on Satellite A100

  Hi all

  The weekend, I decided to install linux on a partition on my toshiba satellite a100. I did a new install of windows from the recovery cd and everything worked fine. I then installed linux on an extended partition and my computer does not display anything on startup - (the LCD has a backlight) and I get all the beeps and reads it from CD etc. The strange thing is that I can plug it into an external monitor and it works fine. When I start with an external display I can then go to the LCD screen and I get a screen but it is very slow and has a lot of flaws.

  I've updated the bios, installed the latest graphics drivers (ati), but still no improvement. Since the linux install I deleted the partition scope and installed windows from the restore CD (still no improvement).

  Does anyone have any suggestions as to what I can try next?

  Thank you in advanced for your help.

  Ask what you can do?
  Delete and format the whole HARD drive and reinstall the OS from the recovery CD.
  If you want to use Linux, I advise to use a Knoppix. You can get it on the Live CD and it s not necessary to install it on the HARD drive.