Boot camp won't load windows installation after partitioning HD

Similar Questions

• Installation of Boot Camp won't move from format

  I have a Mac end of 2015 27 ". Have tried to install Boot Camp several times now - failed. Problem is when I get to the stage of "format" of the partition on windows install. I select the Boot Camp partition and format- then if I try to go then he said 'we could not create a new partition or locate an existing one. Talked to Apple tech support and so far no resolution. Tried everything again to install OSX, loading Boot Camp and going through the same routine again.

  To a lost - can anyone?

  Apple technical support cannot find their own article.

  Please see Boot Camp: "we could not create a new partition or locate one" alert during the installation of Windows 8 - Apple Support . This is valid on all machines in 2015 or later version for W8 + / W10.

  Do not connect any external storage to the iMac. Disconnect all of the hubs. Perform the following two procedures

  Reset the management system (SCM) controller on your Mac - Apple Support

  How to reset the NVRAM on your Mac - Apple Support

  If please delete the Bootcamp partition, if one has already been created and then try again to install Windows via the wizard of BC.

• Boot Camp can not detect Windows software support

  Hi guys!

  1. I have a question, I started my bootcamp and pressed the 2 first options and clicked on continue:

  http://postimg.org/image/9mly0tvjl/

  2. that's what I did to "2." step. I chose the iso file of Windows 7 Home Premium and boot camp agreed and loading all fine!

  http://postimg.org/image/tg97p5fu5/

  3 and now it was time for step 3:

  http://postimg.org/image/554gf7i3x/

  After Boot camp let me decide how many GB, I want to save for Windows... I got 500GB (half) and clicking 'Install'... but the problem is here...

  It is said that: "Boot Camp can not detect Windows supports software.." and so on.

  Where do you think the problem is? Is - this problem on the ISO file?

  I would appreciate any kind of help,

  Thank you.

  What year/model is your Mac? Please see step 11 in install Windows 7 and previous versions on your Mac with Boot Camp - Apple Support .

• Resized partition Boot Camp, now cannot start Windows

  I have a MacBook Pro (with the retina) with a 128 GB SSD which was, until recently, evenly divided 50-50 between Mac and Windows 8.

  However, I need more space on the size of Windows, so I reduced the size of the Mac partition to 40 GB and then, because for some reason I couldn't expand the Boot Camp one, I had to create another partition that I could use to put my stuff in side Windows.

  I did this via Windows.

  I now, weeks later, started in Mac for the first time since, and now I can't get back into Windows. The partition is not present on the desktop, or in the boot disk utility.

  Output of gdisk:

  GPT fdisk (gdisk) version 1.0.1

  WARNING: Open with shared lock devices will not have their

  table partition automatically reloaded!

  Scanning partition table:

  MBR: protection

  BSD: absent

  APM: absent

  TPG: present

  Found valid GPT with protective MBR; using GPT.

  Disk/dev/disk0: 236978176 sectors, GiB 113.0

  Logical sector size: 512 bytes

  Identifier (GUID) of disc: 453C975D-0233-49EB-A8C3-7B7BF7805CFD

  Partition table contains up to 128 entries

  First usable sector is 34, last usable area is 236978142

  The partitions will be aligned with the boundaries of sector 8

  Space free total is 4165 sectors (2.0 MiB)

  Starting number (sector) end (sector), Code name of size

  409639 40 1 200.0 of MiB EF00 EFI system partition

  2 409640 79247487 37.6 giB AF05 customer

  3 79247488 80517023 619.9 MiB AB00 Recovery HD

  4 80517120 119578623 18.6 giB 0700 basic data partition

  5 119580672 236976127 56.0 giB AF00 BOOTCAMP

  Can anyone help please? The partition is obviously still there, but I can't work on how to make it reappear in the startup disk!

  Can you use [help] can not boot Windows after resizing partition (8.1) as reference and rebuild your MBR?

• Svchost.exe is free running and leaves multiple windows open all gel. Re-loaded windows XP after a crash with original rescue records.

  Original title: Windows XP - free race - is lost.

  Just re - load windows XP after a crash with original rescue discs, svchost.exe is free running and leaves several Windows Open gel, all on and offline. Any ideas? I ran ms-fixit beta for all listed. I also disabled Norton and now use Windows Defender, still no luck.

  Hi MarkBerri,

  ·         How long have you been faced with this problem?

  ·         Did you do changes on the computer before the show?

  Svchost.exe is a process name generic host for services that run from dynamic link (dll) libraries. The Svchost.exe file is located in the folder C:\Windows\System32. At startup, Svchost.exe checks the registry services part in order to build a list of services that it needs to load. Multiple instances of Svchost.exe can run at the same time. Each Svchost.exe session can contain a grouping of services. Therefore, separate services can run, depending on how and where Svchost.exe is started. This grouping of services enabling better control and easier debugging.

  Svchost.exe groups are identified in the following registry key:

  HKEY_LOCAL_MACHINE\Software\Microsoft\WindowsNT\CurrentVersion\Svchost

  You can run the auditor of system files on the computer.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Note: if it asks you the service pack CD, follow these steps from the link: you are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker:

  http://support.Microsoft.com/kb/900910 (valid for Service pack 3)

  Hope this information helps.

• Boot Camp error - the startup disk cannot be partitioned or restored to a single partition.

  I use an iMac (retina 5K, 27 inches, end of 2014), the Version of OSX EL Capitan 10.11.1.

  I tried to install windows via bootcamp, but failed. And then, when I'm trying to use Boot Camp Assistant to remove the existing Windows Partition.

  Below will error was triggered.

  The startup disk cannot be partitioned or restored to a single partition.

  The startup disk must be formatted in a single volume in Mac OS extended (journaled) or already partitioned by Boot Camp Assistant to install Windows.

  I want to just delete the Windows Partition and reinstall, can someone help me please

  Here are my details to disc...

  List of $ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage Macintosh HD 121.0 GB disk0s2

  3: disk0s3 Apple_Boot Boot OS X 134,2 MB

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 1.0 TB disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_CoreStorage Macintosh HD 895.8 GB disk1s2

  3: disk1s3 Apple_Boot Recovery 650,1 MB HD

  4: NO NAME 104.9 MB disk1s4 EFI

  5: NO NAME 104.9 MB disk1s5 EFI

  6: EFI No. 104.9 MB disk1s6 NAME

  7: EFI No. 104.9 MB disk1s7 NAME

  8: disk1s8 NO NAME 104.9 MB EFI

  / dev/disk2 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD + 1.0 TB disk2

  Logical volume on disk1s2, disk0s2

  6F4F36AE-BEB3-43EA-8390-C5E7F46574B6

  Fusion unencrypted drive

  List of cs $ diskutil

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group 7C72C890-404F-4CE8-AA74-3AAD4B71D773

  =========================================================

  Name: Macintosh HD

  Status: online

  Dimensions: 1016788279296 B (1.0 TB)

  Free space: 114688 B (114.7 KB)

  |

  +-< physical="" volume="">

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk1s2

  |   Status: online

  |   Dimensions: 895799427072 B (895,8 GB)

  |

  +-< physical="" volume="">

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-> EB5AF0A2-99C5-41DB-B58F-D98B3589AC65 family of Logical Volume

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical Volume 6F4F36AE-BEB3-43EA-8390-C5E7F46574B6

  ---------------------------------------------------

  Disc: disk2

  Status: online

  Size (Total): 1010932908032 B (1.0 TB)

  Reversible: no

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  $ sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 14751/255/63 [236978176 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-236978175]

  02:00 0 0 0-0 0 0 [0-0] unused

  03:00 0 0 0-0 0 0 [0-0] unused

  04:00 0 0 0-0 0 0 [0-0] unused

  Delete disk1s4-disk1s8 using disk utility, run

  Reset the management system (SCM) controller on your Mac - Apple Support

  How to reset the NVRAM on your Mac - Apple Support

  and try again Deputy BC.

• Boot Camp 6 update does not work after update of Windows 10

  I've updated to 10 Windows of Windows Pro 8.1.  With the help of a mid-2015 Macbook Pro 15 "of the retina.

  I followed the steps on the Apple Support page, and everything is fine until the last step - by using Apple Software Update for the installation of Boot Camp 6.

  Download OK, but then it crashes during installation:

  

  What I have to install it from a USB stick or something?  I've seen a few other threads similar issues, but I don't know if it's the same problem.

  Thank you

  Mike

  A Windows Update was executed before the Apple software update? Be careful with the WHQL drivers pushed to your Mac.

• Boot Camp can not install Windows because of the formatting?

  I have a 2012 MacBook Pro (500 GB to 8 GB memory storage) with the OS X 10.11.3. I try to install Windows 8 Pro (64-bit) using Boot Camp. When I restart my computer after creating the partition, I have two USB ins journal. They say Windows and the other says Boot EFI. When I click on the option of Windows, I am taken to a screen that says that there is no bootable disk and restart with an inserted. When I click on Boot EFI, I did get into the Windows partition and can start set up for installation, but when I get to the stage where it asks me to install Windows, none of the listed drives are able to have Windows installed. I have a list of 4 disks, all drive 0 and then partition 1,2,3,4 respectively. 4 is the one that is 46.6 GB (I created Windows to be 50 GB), so I guess it's that I need to be installed in. However, when I click on any of the partitions, this message appears: "Windows cannot be installed to this disk. The selected disk is a MBR partition table. On EFI systems, Windows cannot be installed to GPT disks. Windows cannot be installed to this disk. Hardware may not support booting to this disk. Ensure that the disk controller is enabled in the computer's BIOS menu. "After talking with the Apple support (who told me it was a matter of putting in the form any and to talk to the Windows how do I reformat) and Windows support (who took the opportunity to remind me why I had stopped using them in the first place), I think I have a better idea of what it means , but I have no idea what to do about this. Anyone have an idea how I can fix?

  You have two choices.

  1. use GPT Fdisk to delete the MBR and continue boot EFI. Later, it is problematic when you install the drivers for the Apple hardware.

  2 use a USB2 flash drive and let BCA create setup of USB and partition your drive. No matter what Manual partitioning or manipulate the installer USB can cause problems.

• Stuck Installing boot camp software support on Windows 10 for Mac Pro mid-2014

  Hello world.

  I have a mac pro mid-2014.

  I installed windows 7 using boot camp and all worked fine

  But my SSD has had some problems so I took it to the shop they replaced the SSD.

  SO now I have a blank disc. I restored time machine (I deleted the windows partition when I back up)

  now, I have just a single partition being original, I started to install Windows 10 by boot camp as usual. every thing works,

  created the USB (I used a disk portable 1 TB, I bought recently), downloaded software and then prompted me to make the partition.

  subsequently handed over running and starts the installation. window has installed fine and started, the boot camp installation window pops up and I click Next.

  now, he will be always stuck to the point trying to install realtek audio.

  no progress, no error report. I had to close the installation later, may not close properly due, try force end it.

  have tried mnay times, tried windows 10 business and education. they are all stuck at the same point

  I don't see how I was wrong.

  someone at - it had the same question or idea on how I can fix this?

  Thanks a lot in advance, really frustrating one simple thing I had tried two days after work. ;(

  Please see Bootcamp 6.0 driver install interrupted .

• Boot camp does not start windows 7 alley

  I have the following Setup: Windows 7, Mac OS X Lion 10.7.3 and Boot Camp.

  The only thing I did was Boot Camp Manager to select Mac Windows as boot drive (at the time there was only 1 icon visible in the window, not the 2 that you expect!) (1 for windows and 1 for OS X).

  After the start of Mac I can't get back into Windows more. Now the ALT/Option key does not work, I do not receive the start of disk icons, he begins just to Mac every time. Configuration screen/boot that Mac disks is also visible.

  But if I run the Boot Camp Assistant, it gives me the opportunity to remove from Windows 7, it seems that Windows 7 is here!

  Here is the output you'll probably ask, from the following commands:

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  diskutil list:

  / dev/disk0

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 1.0 TB disk0

  1: EFI 209,7 Mo disk0s1

  2: Apple_HFS Macintosh HD 250,6 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft data base 202,3 GB disk0s4

  Cs diskutil list:

  No logical volume group CoreStorage found

  sudo TPG - vv - r see the/dev/disk0

  See the TPG: / dev/disk0: mediasize = 1000204886016; SectorSize = 512; blocks = 1953525168

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 1953525167

  start index size summary

  0           1                         MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 489531248 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  489940888 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  491210424 1067110728

  1558321152 395202560 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  1423 1953523712

  1953525135 32 table dry GPT

  1953525167 1 dry GPT header

  sudo fdisk/dev/disk0

  Drive: / dev/disk0

  geometry: 121601/255/63 [1953525168 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-409639]

  2: AF 1023 254 63 - 1023 254 63 [409640-489531248] HFS +.

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [489940888-1269536]

  4: 0C 1023 254 63 - 1023 254 63 FAT32L Win95 [1558321152-395202560]

  I hope you can help me trouble Boot Camp and give me access to windows again!

  Kind regards

  Marijn

  Resize you your Windows partition?

  Can you use El Capitan has deleted my windows bootcamp partition as reference and download Testdisk and GPT Fdisk and run a scan of Testdisk and a quick search.

• Bare metal 10 Windows Installer after the upgrade free on-site

  I wanted to start a new thread on the specific problems with the reactivation of Windows 10 after obtaining your free upgrade by upgrade Win7 or Win8 on-site.

  Someone has actually managed to make this work?

  Have you taken steps to clone all parameters (such as the MAC address) of the upgrade virtual machine?

  Have you had to call MS?

  Please chime...

  Someone in my organization wrote the following:

  For what should be obvious reasons, Microsoft does not publish details of their activation. However, several of the VM (.vmx, hard) files contain several unique hardware ID such as Virtual NIC MAC addresses, serial numbers virtual HD, a bios UUID, etc, all these values can be read by the guest OS. We know that the serial numbers of equipment like these are used to generate the hardware hash that Microsoft uses to determine the identity of an activation system, although the exact algorithms are secret.

  We also know that when you copy a virtual machine to a new location VMware Workstation will ask if it has been moved or copied. If you select 'Copy' it generates a new UUID news addresses MAC, etc. and the system requires reactivation because as Windows is concerned, it's a different system or a major change enough 'material' to qualify as such. If you select "I moved it", it doesn't generate a new hardware ID and the system remains activated.

  I'll need backup/snapshot my VM activated prior to the test, but it goes without saying that the start of the install media (Microsoft has a tool to generate or download the ISOs) and shape (or diskpart own) the virtual drive before doing a clean install on a virtual machine enabled previously, as you would on a physical system they wanted to rebuild , will perform a clean installation of the virtual machine and allow a reactivation by license terms for Microsoft. Assuming that automatic resettlement activation works as Microsoft said, is installed on the same virtual hardware as long as you don't tell VMware to generate new material ID's

  https://www.Microsoft.com/en-us/software-download/windows10ISO

  On the reverse, there is also this 'feature' 'factory reset' which also supposedly returns it to a 'clean install' state you said could be another possibility.

• Problems with Windows Installer after using System Mechanic.

  I had a problem with my Dell 2 years and was told by the Support Dell buy iolo System Mechanic. However, now I have problems with Windows Installer (it is not installed correctly) and I've read that this can be caused by the registry cleaner in the iolo System Mechanic.

  So, really two questions: 1. do I need iolo System Mechanic? 2. how to correctly install Windows Installer?

  Thank you!

  original title: Registry Cleaner/Windows Installer

  So, really two questions: 1. do I need iolo System Mechanic? 2. how to correctly install Windows Installer?

  1 no, the registry cleaners can give you immediate relief, but they are a big pain in the long term.

  2. follow the four methods listed in the resolution section of the following article:

  http://support.Microsoft.com/kb/2642495

• Bootcamp not to proceed with the installer after partitioning

  I just bought a new retina 15 inch macbook pro mid 2015. I downloaded the iso of windows normal 10 of microsoft, and I use the bootcamp assistant. the thing works completely and partitioning the disk and once its finished my computer restarts and mac instead of run the windows installer starts up. I have had no error message it did not a USB or anything like that just the iso file. the partition has been created and all that I checked in disk utility, but I can't start windows. I had the option while restarting and it had no option to run windows, start only on mac. someone please help I have no idea how to fix this

  Your Windows Installer is not started. Run BCA, remove the Windows partition, disconnect the external storage, perform the following two procedures and then to try BCA.

  Reset the management system (SCM) controller on your Mac - Apple Support

  How to reset the NVRAM on your Mac - Apple Support

• Cannot load Windows 7 after installation of 2 critical updates (KB2436673 & KB2296199) - 0x800f0816 error Code

  At 03:00 today, my computer automatically up-to-date with 8 updated reviews.  The computer unused satellite, power, up to 15:00 when I got home, date on which windows was trying to 'fix', because windows could not be loaded.  I did a system restore to a point before the updates were installed (02:00).  Goodbye My observer of events and concluding that none of the updates have been installed correctly, I have taken note of the errors for each (most were 0x800f0816, but we've been 0 x 80242016) and went through each update individually and install.  Two of these updates will not be installed.  After the system restart after installing, windows attempts to load.  The system automatically restarts and begins to repair windows.  Windows repair indicates that the system cannot be repaired automatically.  I chose a restore point from before the 'bad' updates are installed, and everything is fine.

  I get the same error for the two KB2296199 of KB2436673 & failed installs: 0x800f0816.

  Is it possible to fix this?  Or I'm just not going to install it these updates?  It is a newly built computer (last week), all the new kit stripped of equipment, new OS.  I have very little installed on this system.  I found no information regarding this error code or the latest MS updates online, or if anyone else has similar problems.

  Any response would be appreciated.  Thank you!

  J.

  Of course, if you cannot start the computer, uninstall the updates would be moot & system restore (or 'last good' known) would be your only recourse.

  Again, see http://www.microsoft.com/security/pypc.aspx

  Welcome & thank you for your comments. Happy Chrismakwannukah!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Videos in apps won't load is not after the upgrade to Windows 8.1

  Error message saying "the impossible to play video.  Try again. '

  Is happening in the ESPN, NBC News app and NFL Mobile USA app apps.

  All the apps worked fine before the upgrade to 8.1.  All applications are updated.  Windows Update ran.  Restarted.  Still get this message.

  If anyone knows how to solve this problem, that would be great, thanks!

  To solve the problem... Had to go to the Lenovo site to download Realtek audio driver and it worked finally.