laptop does not start in windows

Similar Questions

• Laptop does not start upward, Windows error recovery

  Hello, my laptop has blocked start correctly.

  It all started when I was using the laptop as usual and the battery disconnected, I didn't notice right away until I removed the charger and the phone is dead, because then the laptop does not start with the dough connected and the charger,

  I use Windows 7 when I boot up I got to Windows error recovery that takes me so into the Startup Repair which is nothing, I tried system restore but it won't let me past picking of a restore point.

  I have I have the laptop currently in safe mode hoping that would allow me to restore the system, but it has not, please someone can he help because it is a work laptop and I need to use it this weekend

  Thank you, Josh

  Hello

  Thank you for visiting Microsoft Community.

  According to the description of the problem you are facing problems with your Windows 7 computer. The question might be if there is a file system corruption. Then I suggest you to perform auto repair. For the execution of the task, I suggest you to try the steps below and see if it helps.

  Method 1:

  When you use the recovery environment (Windows RE) to troubleshoot startup issues, first try the Startup Repair option in the System Recovery Options dialog box. If this does not resolve the problem, or if you have additional problems manually, use the Bootrec.exe tool.

  Because you cannot start the computer, you may need to create a bootable Windows installation media, and then do an auto repair.

  If you are using Windows 7 then the link provided below might help you to download and create installation media.

  Download Windows 7 Disk Images (ISO files)

  Method 2

  Try to rebuild the BCD by using the Bootrec.exe tool.

  To run the Bootrec.exe tool, you must start Windows RE. To do this, follow these steps:

  1. Place the Windows 7 installation disc in the disc drive, and then start the computer.

  2. Press a key when you are prompted. Select a language, a time, a currency, a keyboard or an input method, and then click Next.

  3. Click repair your computer.

  4. Click the operating system you want to repair, and then click Next.

  5. In the System Recovery Options dialog box, click command prompt.

  6. Type Bootrec.exe, and then press ENTER.

  See the following link for more information:

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  Hope this information helps.

  Meet us with the State of the question.

  Sincerely,

  Ankit Rajput

• Laptop does not start after Windows update

  I have HP laptop with Windows 8.1.

  It no longer starts after you install updates.

  It has happened before several times. I used system restore and it should correct the problem temporarily until the next time for the installation of updates.

  Now I can not even run system restore. He says that I have an administrator account.

  Help, please.

  The process I'll tell you will solve the problem, but it leaves a few effects. All the installed update will be uninstalled the version they had when you have installed 8.1 windows and programs in your programs (x 86) NO program file in the C: drive or the drive where windows is installed must be UNINSTALLED. The uninstalled programs will appear on your desktop as Applications.HTML removed. If you have any problem with the effects that I mentioned that process as follows:

  1. at start up press F11 to enter recovery.

  2. go on recovery to solve problems.

  3. then in troubleshooting, click on refresh your PC.

  4. wait it ends (it takes about an hour)

  5. your system is restored.

  Hope this helps

• Upgrading RAM and now computer laptop does not start for Windows 7

  Hi all

  I'm working on laptop HP Pavillion G7-1070us of my father, and I'm having a problem starting after the installation of 8 GB of RAM.  I upurchased 2 sticks of 4 GB of DDR3 PC10600 UN buffered, NON ECC RAM of Frys and everytime I go to start the laptop it throws an error that can not load Windows and offers to run the repair or start normally... little matter that you select, it goes back in the loop of what prompts to repair or load... The BIOS recognizes all the 8 gb... have you tried 2 different sets of different manufacturers (Patriot and Crucial). As soon as I pop 2 2 GB sticks in it boots fine... I even tried to start the the Windows 7 DVD to repair windows, but he always comes back in the loop... I tried the two current and previous BIOS without success... Help, please

  Hello

  Sorry, I've updated the link:

  http://www.crucial.com/upgrade/HP+-+Compaq-memory/Pavilion+G7/Pavilion+G7-1070us-upgrades.html

  Kind regards.

• HP 15-f009wm Notebook PC: laptop does not start in windows. UEFI diags say hard drive is bad.

  I intend to replace the hard drive for this machine. What can I use?   I am using this one.

  However I don't have a recovery disc and machine is a windows coa on it.  I do not know what image to use 64 bit? House?    Do I need to download a special HP image?

  Thank you

  Ben

  This hard drive works perfectly. The good news for you is that if you have 10 Windows on the old hard drive and it has been activated, you can use the tool for creating Windows 10 media on any computer to do an installation of the full version Windows 10 disc and reinstall Windows 10 and it will activate automatically. It sounds a bit like 'Big Brother', but Microsoft has a profile of each computer enabled with 10 windows and he "knows" your computer by hardware ID or black magic, that we can guess only vaguely. You just need to know if you had 10 Windows Home or Pro (probably home and almost certainly 64bits)

  Post back with more questions. You have other HDD and SSD options, as well.

• My laptop does not start after cleaning

  Hello
  I knew an overheating problem on my laptop.
  I therefore decided to remove a processor heat sink and empty dust. It was released with processor...
  There was a huge load of dust, so I cleaned it, put new thermal paste...

  Now computer laptop does not start loading Windows.
  It checks only the CD, HARD disk, and that's it.
  Screen is blank, ON the indicator led is on.
  Two fans periodically start to turn (when they stop radiator heat - so the processor works)

  Where is the problem?

  Thank you

  Hi Dubas,
  You can access the BIOS when you try to start your laptop? This can give you a clue as to why the OS will not charge.

  Kind regards

• Laptop: laptop does not start

  My laptop does not start, how can he?

  Hey,.

  First, a good thing to try is a hard reset of the computer.  The steps are different depending on whether your battery is removable or not.  See http://support.hp.com/us-en/document/c01684768 for steps and videos covering this first easy step.

  If you are still having problems starting to walk through the steps in the troubleshooting online here documents:

  Windows 10 - http://support.hp.com/us-en/document/c04718479

  Windows 8 - http://support.hp.com/us-en/document/c03515402

  Windows 7 - http://support.hp.com/us-en/document/c01443371

  -wes

• Satellite A200 - support Button does not start when windows starts

  Hey,.

  Today, I decided to disable unnecessary programs as many as I could (to speed up my pc), so I went to Msconfig (I have vista home premium 32-bit) and a lot of things off. Including the "toshiba button support. The next time I restarted my additional buttons on the top of the keyboard all worked, next to one. Who normally turn on windows media player. This time, he did nothing at all. Game/resume, stop, forward, back and button internet all worked without problem.
  However, I really liked the WMP button, so I tried to find out what the problem was. I discovered that it was the support of the key, so I decided to reactivate it.

  However, this didn't not help: (.) I turned it in msconfig, but it does not start with windows more: (.) I know this is the program that I need, because when I run the program manually (this is the program: programfiles/toshiba/TBS/HSON.exe) the button works.
  I put a V in front of the msconfig program, but it does not work. Anyone has an idea why not?

  Edit: I found a solution, even if not the best. If anyone still has the same problem:
  I made a shortcut for the program to run (can be found in C:programfiles/toshiba/SCT and is called HSON.exe). Then I clicked start and said 'all programs', here I chose the "opstarten" folder, it comes to the Dutch version, but my guess is it's called something like 'start-up' in English. In this regard, I glued (copy / cut-> paste) the shortcut to the program, and now he begins again :)

  Hello!

  I agree with Akuma. You should try to reinstall the Toshiba value added Package. This determines media keys FN and all special functions on the laptop buttons.

  Search on the Toshiba site for an update:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• Pavilion dv6: computer HP pavilion laptop does not start and I do not see the screen because it's broken

  I have the HP pavilion computer laptop windows 7 and I broke the screen about a year, I can't see the start menus. I have been using an external monitor and it has always worked well, but now I can't see how to fix my computer to boot.  I did a hard boot but nothing happened, and with a broken screen, I can't see any of my options on how to fix it.  It does not start.  Looks like it is, but because I don't see the menu F8 or Boot, I can't call themselves that the screen can be done.  Help, please.

  Hello @SPKaler,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I read your post on the issue with the laptop won't start does not and wanted to help you!  I understand that the screen is damaged and you are using the external monitor to view the screen.  However, now that the laptop does not start, you can see is more of the external screen to see what is happening.

  From my understanding, you should not be able to see an image on the external monitor, until you start the operating system.  You can try to perform a system restore by using this document:

  HP computers - performing a recovery of system HP (Windows 7)

  You may be able to follow along, long enough until the image is displayed on the external monitor.  Otherwise, you can contact HP support by phone, for additional options.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Pavilion 15 laptop: HP Pavilion 15 computer PC2170 laptop does not boot to Windows - 2 years

  Hi, my Hp Pavilion is only 2 years and 2 months (not very old at all) but suddenly it does not start in Windows, it hangs at the HP logo screen, it starts with an HP logo screen then goes to another screen of the HP logo, and then freezes. I can't get into safe mode.  I got in the Hp diagnostic screens and I conducted tests on all and everything.

  I did a hard reset, still frozen.

  I removed the cover, he went out and placed him in, still nothing.

  Whenever I have to try and reset it, he said administrative privileges is necessary, but there is no administrative privileges on this computer.

  There is no restore point.

  I ran chkdsk via the command prompt and had no error.

  I tried running sfc: scannow but I had which was something in the meantime and could not do.

  The laptop is: laptop HP Pavilion 15 2170

  A6-5200 APU AMD processor

  Can someone computer whizz out there enlighten us on this you problem, please.

  When you request support, please provide the model name and product number complete (p/n) of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

  The information requested above are on the bottom of your computer, inside the battery compartment or on the BIOS boot screen. Please see How can I find my model number or product number? for help more to find this information. DO NOT include your serial number.

  

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• HP-gs61-110sa: help! laptop does not start

  Help, please! Laptop does not start. Looking at the black screen with cursor flashing at the top left.

  Hello

  If you do not, use another PC to create a Windows 7 repair CD.  Download the ISO from the link below.

  Windows 7 64 bit

  You must use an app like ImgBurn to burn the ISO to a CD ( Note: you can deselect additional software during installation of ImgBurn options)- hereis a guide on the use of ImgBurn to write an ISO on a disc.

  One time created, or if you already have this, typing away at the esc key when you launch Notepad to open the Start Menu.  Insert the CD to repair.  Select boot options ( f9 ), use the arrow keys to select the CD/DVD drive and press ENTER.  You can also get a prompt to "Press any key to" continuous - it if requested.

  When loading, select repair your computer and choose the command line.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the CD from repair and try to restart the laptop.

  Kind regards

  DP - K

• After the deployment of a Windows 7 image, pc does not start after Windows logo

  Hello

  I tried to install a laptop via a Windows Image. After that I deployed the image, the laptop does not start past the Windows logo. Normally I had to change the SATA AHCI setting to solve this problem, but he was already on AHCI.

  I tried to install it via a Windows 7 installation CD and it works, but I want to fix the laptop / image to work on this laptop.

  The logo of Windows get stuck, then I get a blue screen very quickly and it restarts. Also when I try to start in safe mode, it's the same thing. loading everything, then it gets stuck and also a really fast blue screen and reboot.

  Someone at - it an idea may be what the problem?

  BR,

  Jim

  I did restore by image much, many times without ever a problem.

  • I only use the integrated Windows 7 image creating installation
  • I only use a DVD + R White, never-r
  • I create the image ONLY on install brand new to be absolutely certain, there is no corruption

  I've heard of this kind of problem does not happen when the image was made from a damaged disc.  Which simply transfers the corruption.

• Pavilion dm4-1265dx does not start after Windows 7 logo

  My laptop does not start after the "Starting Windows" screen when I try to boot the operating system normally. When I try to run the repair mode from the start nothing happens... I get a blue background image and the pointer of the arrow, but no icons or windows appear.

  I tried the system diagnostic mode by pressing ESC when turning the laptop on and the hard drive test fails every time, showing the following results:

  Test Drive: 1
  INTELLIGENT control: passed
  DST short: failure

  Failure ID: 64RG79-5AP62V-XD6U2K-60RN03
  Product ID: XZ298UA #ABA

  Hard drive 1

  --------------------------------------------------------

  Test drive: FAILURE

  How should I proceed? The laptop is still under warranty, but it was purchased in the United States, and I now live in the Brazil.

  Hello

  You will need to replace the hard drive.

  HP should send you a new drive for free, but in your case is a little complicated as you mentioned it already. Please contact HP tell them about this situation. How to do?
  Click on the link below and choose your country:
  Contact HP worldwide

• Satellite C55 - Has - 1 L 0 does not start in Windows 8

  Hey guys.
  I hope you can help me a bit.
  I have a Toshiba Satellite C55 - has - 1 L 0 here and it does not start in Windows 8.

  I turn it on, the Toshiba start screen appears, and then I get a message on a black screen saying "media control" (failure) and after a little while "no boot device. Please restart.

  I checked the BiOS and it does not see the hard drive (said HARD drive - no) and even in the boot order list, I don't get a list with the DVD drive with the exact name, but for the HARD drive.
  I tried to do a recocery with the F12 key and get the list to choosw where I want to start but by selecting the disk hard does not work.

  So I thought I'd try a live distribution of linux to see where is my hard drive and back up my data (after some settings in the BIOS - boot CMS mode) but I can't find there too. (I have a file fstab and mtab, it would help if I posted it here?)
  Is my HARD drive broken? Can I try something else?

  Thank you very much!

  You are right. This issue should be fixed by the authorized service provider.
  Furthermore, why do some risk steps to check this problem, if the warranty is valid.
  Warranty will cover the repair costs.

  Addresses and phone numbers, you can find on http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/

  Good luck.

• Laptop does not start with the connected usb device

  Hello
  Voila, I have a Sp6100 Pro Satellite, when I try to start whith a usb printer is connected, the laptop does not start. I have the latest version of the bios 1.90.

  THX,
  Barzot @+.

  Hello

  What you mean with start won t at all? Is there any kind of reaction if you press the power button / stop?