Bootcamp drive disappeared (El Capitan)

Similar Questions

• Unable to start bootcamp after partitioning El Capitan

  Lonely HI T,

  I recently partitioned the drive where is installed OSX El Capitan. Now, to press the Option key at startup to the top, I can't select my Bootcamp partition to boot.

  Here's the info re: my product:

  Here is some information about: my volumes:

  • I have OSX installed on a partition 'Macintosh SSD' a 500 GB SSD
  • The files are on a 'Macintosh HD' partition in a 1 TB HARD drive
  • I have Windows Bootcamp installed on a "SOLID" NTFS partition in the same 500GB SSD
  • and another NTFS partition for Windows files "LIQUID" in the same 1 TB HARD drive
  • I also have a new partition (which lead to my problem) "ScratchDisk' in the same 500GB SSD

  Also very "SOLID" and "LIQUID" NTFS partitions are currently read-only that is ' owners: disabled "in disk utility after creating a new partition"ScratchDisk"for Photoshop in the same 500GB SSD and SOLID will not show up to start up after pressing the button 'Option '.

  I already had Tuxera NTFS installed but uninstalled.

  Below you will find the following information:

  • diskutil list
  • Cs diskutil list
  • sudo TPG - vv - r see the/dev/disk0
  • sudo fdisk/dev/disk0

  Thank you for the patience and kindness in advance,

  CESCO

  Last login: Tuesday, February 2, 23:22:10 on ttys000

  Cescos-iMac: ~ list of the Cesco$ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 500,1 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Macintosh 250,0 disk0s2 GB SSD

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: disk0s4 Apple_HFS ScratchDisk 99.2 GB

  5: Microsoft data base SOLID 150,0 GB disk0s5

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 1.0 TB disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_HFS Macintosh HD 899,2 GB disk1s2

  3: Apple_HFS Recovery HD 650.0 MB disk1s3

  4: Microsoft data base LIQUID 100.0 GB disk1s4

  / dev/disk3 (external, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: FDisk_partition_scheme * GB 500,1 DIS3

  1: Windows_NTFS GB Seagate Expansion Drive 500.1 disk3s1

  Cescos-iMac: ~ Cesco$

  Cescos-iMac: ~ list of cs Cesco$ diskutil

  No logical volume group CoreStorage found

  Cescos-iMac: ~ Cesco$

  Cescos-iMac: ~ Cesco$ sudo TPG - vv - r show/dev/disk0

  Password:

  See the TPG: / dev/disk0: mediasize = 500107862016; SectorSize = 512; blocks = 976773168

  See the TPG: / dev/disk0: PMBR to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 976773167

  start index size summary

  0 1 PMBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 488188328 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  488597968 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  489867504 193675024 4 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  683542528 262144

  683804672 292968448 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  976773120 15

  976773135 32 table dry GPT

  976773167 1 dry GPT header

  Cescos-iMac: ~ Cesco$

  Cescos-iMac: ~ Cesco$ sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 60801/255/63 [976773168 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-976773167]

  02:00 0 0 0-0 0 0 [0-0] unused

  03:00 0 0 0-0 0 0 [0-0] unused

  04:00 0 0 0-0 0 0 [0-0] unused

  Cescos-iMac: ~ Cesco$

  Re: Unable to start bootcamp after partitioning El Capitan

  Please after the release of

  sudo dd if = / dev/rdisk0s5 account = 1 2 >/dev/null | hexdump - C

  It will show you the first block of the SOLID wall.

• Navigate to the bootcamp drive, while the virtual machine is open

  I have VMWare Fusion 3.1, use it on a Windows 7 64-bit bootcamp.

  I need to access my Mac OS player - sometimes even when I run (play?) the merger virtual machine.  The drive disappears from the Finder when it runs.  Can I change this?

  Hello

  No you can't change it.

  A single operating system can directly access a system of files at a time unless it is a clustered file system.

  Like any normal filesystems like NTFS/FAT/etc... are clustered, you cannot do so.

  The answer to that is to share your files via network shares.

  --
  Wil
  _____________________________________________________
  VI Toolkit & scripts wiki at http://www.vi-toolkit.com

  Writer to the blog www.planetvm.net

  Twitter: @wilva

• Bootcamp Drive distribution

  I installed 10 Windows with Bootcamp and too much space, so I don't want Windows keep all that storage, so with an app from MiniTool Partition I cut free space and is on a different disk (because if I let the utility disk unallocated still will add it on the Bootcamp drive, so the unallocated space is available only in Windows) and now inside the disk utility I reformatted the drive so that OS X can see too and I can also use it as a seconday drive but there is no way to fusion of with the main drive as I used to be, why is this? Thanks for the help and sorry for my English...

  There is no way to do what you ask without reformatting.

  To join two partitions, they must be consecutive.

  You cannot join the first (the mac partition) on the third (that you sculpted in training camp, which is the second).

  You can always clone the mac to an external drive partition and then clone back.

  There used to be a tool that did the same thing for the windows partition (winclone, I think) but I've never used it.

  In any case, if you choose to reformat, it is a good idea to reformat with a single partition and do a clean install (which creates the 'recovery' for you partition) before clone you the mac partition back. Then apply the training camp to create the windows partition as desired and eventually clone back or install windows.

• How to format an external hard drive in el capitan

  How to format an external hard drive in el capitan?

  I have a new iMac and bought a WD 2 TB hard drive. The manual says that I have to reformat the hard disk to use it with OS X.

  I opened the disk utility program, but there is no button to format the hard drive.

  How can I manage to reformat the hard drive?

  Select the external drive, and then click clear. Format Mac OS Extended journaled. If you want the drive to be bootable partition with the Guid partition scheme.

• Optical drive disappeared

  Hi all

  Please can someone advise on this annoying situation! My CD drive disappeared from the workstation and grabs a CD does nothing.

  I get this error; TSST corp cddvdw su-208fb has a driver problem when running to troubleshoot. But does not help to advise what to do next!

  Any ideas?

  Thank you

  Hi Neo

  What model of laptop do you have?
  Optical drive is listed in Device Manager?
  Some unknown device that there are listed?

• Satellite P100-188-CD/DVD drive disappear when install iTunes

  I have a P100-188 and when I install itunes (ver 7.7.11 I think) my D drive disappeared.
  If I check in the device manager that there is an error in there against the disc.

  The only way I can get back the player must do a system restore.
  Does anyone know the version of iTunes that I have to install to bypass this or the correct driver for the reader?
  The device has a drive HL-DT-ST DVDRAM GMA-4082N installed.

  Thank you very much

  James

  > "iTunes has encountered a problem and needs to close." The error signature shows that: AppName: itunes.exe Appver:8.0.0.35 Modname: unknown Modver:0.0.0.0 Offset: 00008200.

  I remember one of my friends had a similar question. The error always appears after the new installation of iTunes.
  He called me and I tried different things, I reinstalled the application, clean the OS, etc, but anything :( I was really desperate

  Finally, I decided to reinstall the OS to see if there could be something wrong with the Windows installed. And that was the key of the OS has been confused don t I know why, but after the new OS installation (it was a hard way) worked the iTunes

  If you can first try reinstalling iTunes, then clean the operating system using CCLeaner and then try again.
  If this can't help, then a new install of the OS may be necessary!

• Re: Satellite L650-11F, DVD drive disappeared Windows 7 after that BIOS installed

  Hello

  I would like to ask for help about this problem:

  Today one of the programs from TOSHIBA, that came with my laptop (L650-11F), warned me about an update of the BIOS (v1.80) after download and install my DVD drive disappeared from Win7 and it has a continuous yellow light on it. It does not even open when I press the eject button.

  I have however maybe install the old version 1.60 back would help, but TOSHIBA does not keep older drivers version apparently.

  Any help would be greatly appreciated.

  Hello!

  Restart your computer. During the startup, at the beginning, press the F2 key to enter the BIOS Setup. In the configuration, press F10 to restore all the default BIOS settings. Save the changes and exit.

  Post here if your problem solved.

  Kind regards.

• Partition on HARD drive disappeared after formatting using the product recovery disc

  My laptop came with a partitioned hard drive C and D drives.

  After formatting my hard drive using the recovery disk of the supplied product with my computer, I don't have any option to partition the HARD drive, only for the 1. 46 GB for some recommended backup, and the remainder became the C drive.
  D drive disappeared. Now, when I put the USB ant in my laptop, it reads as D drive.
  Can you please help, I need to have my hard drive partitioned into C and D drives, and flash memory can be any subsequent letter.

  Hello Richard

  Is it so complicated to tell us which model of laptop you have exactly?
  Anyway, when you use recovery Toshiba you cannot lose score. After using the recovery media, you'll have to factory settings and the structure of the HARD disk will be the same as on the first day.
  Something like that is definitely not possible.

  > I don't have no option to partition the HARD disk
  This option doesn't exist. On some older models of laptops, just an option to set up the first score ability there.
  After the first start, you can go to disk management and activate the second partition. All that s!

  Please tell me what model of laptop have you then I can tell you more about the partitions.

• Realtek HD Audio driver disappears after installing an ATI Radeon graphics card

  My Realtek HD Audio driver disappears (the Vista "Sound Manager" and "Device Manager") and is replaced with an ATI HD Audio driver after you install an ATI Radeon 5450 graphics card.  I tried to uninstall the ATI Audio driver and re - install the Realtek Audio driver.  But, after reboot, Vista automatically re - installs the ATI Audio driver (and the Realtek Audio driver, which I have just reinstalled, is not where after the reboot).  I use a HP a6110n desktop running Windows Vista.

  This works!  I would never have suspected that the problem was a BIOS setting.  Thanks for the good advice!

• Cd\dvd drive disappeared on Equium A60

  Hi all

  Can someone help me? I have an Equium A60. It's 18 months, outside the usual on heating problems and closing, now it starts but my DVD drive disappeared. I have a rug * a DVD-RAM UJ - 830 s. Win XP just didn't load it.

  He is no longer in 'my computer '. I'm in Control Panel of configuration and the 'systems' then 'system properties' and watched on 'Device Manager '. The drive is there, but with a big yellow exclamation point. So I checked the 'properties' it has the following message: "Windows successfully loaded the device driver for this hardware, but does not the hardware device. (Code 41) "and troubleshooting has no use.

  More than heating cooked my drive? I've updated the drivers for it, but this has no effect.

  Any ideas... ?? Thanks in advance...

  Hello

  When you use advanced search option, you will find several similar views with a solution to this problem, but once again for you http://support.microsoft.com/default.aspx?scid=kb;en-us;320553

  Please use method 1.

• The D drive, which is a partition on my main hard drive disappeared.

  My D drive, which is a partition on my main hard drive disappeared. He has a lot of data. I use Windows xp. How to restore the partition as drive D and recover files that have been on it?

  Hello

  I suggest you to go to disk management and check if the disc is in the list:

  http://support.Microsoft.com/kb/309000

  You can try to restore the computer to an earlier point and check if it helps:

  http://support.Microsoft.com/kb/306084

  It will be useful.

• CD drive disappears after insalling Service Pack 2

  Can someone help me? My cd drive disappeared after installation of Service Pack 2 of Vista I uninstalled it and it reappeared. Then I installed other updates of Vista and the same thing happens.  I insert a cd in the player it starts spining but it won't play at all. I even checked the computer option where it gives you the hard drive and the cd player are supposed to be.  The hard drive is displayed but the cd drive has disappear. I don't know what to hope there, someone could help me.

  Hello

  Please click on start > search and in the search box, type Device Manager.
  Select device under DVD ROM Manager, you see the device.
  Make a right click on it and uninstall the device.

  There is no specific driver for reader to CD\DVD to the Web site of the manufacturer for the dv2000 model.

  Please, do a right-click on the DVD ROM drives in Device Manager and select "Properties".
  Under "Properties", select the Details tab, you will find the DEV and FRI [DEVICE and VENDOR ID].
  Please give me that.
  I'll help you get the drivers for DVD ROM

  Kind regards
  Manasa KP.
   
  Please let us know if the problem is resolved.

• Mapped network drive disappears

  I had a problem with a user on my network, when they log off and shut down their system, they are losing one of the 9 mapped drives. It's always the I: drive. The rest of the readers are mapped and simply the I: drive remapping works. The strange thing is that sometimes the player is connecting and sometimes not. Reconnecting to the connection is enabled, when you run the Net Use command, it says "new connections be remembered."

  I made sure there are no devices connected via USB, like phones or external drives. I read in several forum posts on problems similar here and other sites, but none of these solutions have solved my problem. I made the registry changes, changed the drive etc. letter. Considering that there is a problem with one user, I guess the question must reside on his PC. For any help or suggestion would be greatly appreciated, thank you!

  Hello

  Please keep us updated on the status of the issue.

  I appreciate your time.

  Please refer to the suggestions of ANDREWSUPA responded on 16 July 2014 and check.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/mapped-network-drive-disappears-after-restart/4952ee1e-4691-4557-A672-58632d9c2a2c

  If this does not help, I suggest you to ask your question on the TechNet forums for assistance from her professional.

  TechNet Forum
  https://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Thank you

• Internal drive disappears after 15 minutes running ' G:/Users/SAM/Desktop refers to a location that is unavailable'... etc.

  Hey everybody,

  This is my first post here, and it's because of a terrible problem that I have where one of my internal drives disappear literally just from my computer after about 15 minutes of my computer.  If I restart the computer the drive will return, but then disappear just after 15 minutes of use.  If I remove the drive and connect it to an USB hard drive docking station, it will show well here.  It's just a 250 GB SATA drive.  The only thing I can think is that I use it to store all personal files that are usually stored on the system C:\ drive.  When I installed the OS a few years ago, I went through the steps to get my data off the drive system in the event of a crash.  I doubt that could be the cause of the problem because it has worked well for a long time like that?  I remember having to do weird things in the registry or something to get the users folder to point to another drive.

  The problem exists since probably almost a year now...  It got so fed up of this office that I just stopped using it and started using my macbook exclusively for about a year.  I'm starting to use this computer for backups because it can hold much more (and more numerous hard drives) that the macbook could dream to).

  Any help would be greatly appreciated.

  Thank you
  -Sam

  If it works in a dock and the dock is a dock motor, it is the motherboard, or a connector failed

  Although G: might suggest that you have several internal hard drives and if so, you can check if the power supply is charged.

  And no it's not a victory to issue.