"bootmgr is compressed" error, impossible to decompress bootmgr

Similar Questions

• Cannot install OS - error-19235 xq199905 decompression error - 3

  I have trouble getting my restore disk to work. I can get it insofar as the ghost screen installs approximately 7% of the image, then these error messages appear error-19235 xq199905 decompression error-3.

  The same thing happens when I try to install Windows XP Home edition on a disk, it goes through to the copy of the files then keeps saying cannot copy file retry or ignore, this happens on all files. I tried a new HARD drive, but exactly the same thing happens.

  Anyone out there can help me because I'm going crazy trying different configurations. I tried the new MBR, full format, new HARD drive, 2 different disks of WXP.
  I've been around computers for 17 years and we never beat me but it made me.

  When I first tried to restore from the factory CD I had to disable the L2 cache before what I have explained.
  Hope someone can find an answer.

  At soon Baztc

  Hello

  Very strange problem! Your service is very good, but from your description, maybe you should pay attention to the optical drive.

  Recovery media, Microsoft Windows XP Home CD edition and disk HARD must be OK. Try somehow to install OS without ODD use (installation may be on LAN or WXP CD copy to the second partition).

  It's really not easy to say what can be the problem.

• Permission error - impossible to enumerate the objects in the container. Access is denied.

  I'm changing my library to my current user permissions and although some of my files are fine, a bunch of them throw the error message: "Permission error - impossible to enumerate the objects in the container. Access is denied. "When I try to change them. I can go in files and folders manually and edit them correctly, but it's a pain in the buttocks seen there are literally the * hundreds * of files that it is coming on.

  Any ideas on how to fix?

  I'm having the same problem, but try to include a file folder on a hard drive support separate than where I had installed windows 8. There are literally thousands of files. To your question:

  1 Yes

  2. Yes, and any other folder on the drive.

  3. to access the folder, I need permission!

  Thanks for your help, it is very frustrating.

  Here's how I solved my problem-
  1. on the root folder, right click, select Properties, select Security tab.
  2. click on advanced
  3. the window that opens should indicate to the current owner. Click on 'change '. Him "select user or group" pop up box appears.
  4. in the text box, type your user name (you should be an admin) and click the button "check names". Your name is replaced by the name of 'official' system (i.e., preceded by the name of the computer and the backslash).
  5. click on OK
  6. the box disappears, sending you back to the advanced security settings window.
  7. a new box appears under ownership, with the text 'Replace the owner of subcontainers and objects' check this box.
  8. I also selected the checkbox "Replace all entries authorization child object with entries permissions inheritable from this object", but I think that I had to run this twice - once with this checked and one without.
  9. make sure that 'everyone' appears in the Permission entries, if not, click Add. The same box that is displayed in step 4 appears again. Type everyone, click on "Check names", then "OK".
  9 valve apply

  I see also folder property can be changed to "everyone" - I have not tried to change all owners of my file to this, but doing so may eliminate the problem altogether if the drive is moved to another computer.

  I hope this helps someone, this problem and the lack of documentation has been quite aggravating.

• Adobe error: impossible to copy a critical file

  anyone can fix?

  Adobe error: impossible to copy a critical file

  error code: 43

  Cannot install the CC app

  After you run the: creative cloud set up

  It will be stuck on 1% and no change then the error occurs

  Please visit get the 43 error when you try to update creative cloud.

  Concerning

  Hervé Khare

• SRM 5.5 - vSphere replication - error: impossible to reverse the replication for the Virtual Machine. A snapshot operation cannot be performed

  Hi all, we have just run a test DR failover of a couple of virtual machines in our protected our failover site and all site swung perfectly, two virtual machines came online and all applications work well. However when we cam to r-eprotect machines virtual, we get some errors.

  One of the virtual machines seems to have lived the reprotect end process, it is still running, but has not moved to 89% for some time. The virtual machine has a couple of grand (a little less than 2 TB) VMDK. slow progress is just a consequence of the large VMDK?

  More worrisome is the virtual machine which don't reprotect at all. It generates an error whenever I click on the "Restore" button (error: impossible to reverse the replication for the Virtual Machine.) A snapshot operation can not be performed).

  
  Does anyone have any ideas as to the cause?

  Thanks in advance for any help.

  Andy

  Finally got to the bottom of this. The issue was that reprotect SRM work was trying to dispel any snapshots that were taken on the computer object virtual destination in VMWare, but could not clean snapshots.

  The reason why snapshots would not consolidate was because it was snapshots of temporary VEEAM who in fact any snapshot file listed in the VSAN data store. So when we looked through the browser data store, no snapshot file existed in the virtual computers folder. Trying a manual removal also failed.

  To fix this, we created a snapshot of the virtual machine in the original data center (note is the engine to the bottom of the virtual machine), this effect was to get rid of the 'fade' snapshot that was visible in the Snapshot Manager that VEEAM backup had left behind. Once this had disappeared, the reprotect back to DCA worked perfectly.

• HR 11 cmd line: error: impossible to analyze all project files.  Unexpected error: failed to prepare a single source

  Hello

  I am running RH (installed in Program Files x 86) 11 on a Win 7 (64-bit) machine.  I just created a new project with a lot of folders/subfolders and a single topic welcome.  This project compiles fine using the RoboHelp interface.  However, when I run RHCL from the command prompt, it refuses to start.

  Here are the details of the order and the results:

  from c:\Program Files (x 86) \Adobe\Adobe RoboHelp 11\RoboHTML

  c:\Program Files (x 86) \Adobe\Adobe RoboHelp 11\RoboHTML > rhcl 'c:\knowledgecenter\knowledgecenter.xpj'-l 'WebHelp '.

  Adobe (R) RoboHelp version 11.0.4.291 Project command line compiler

  Copyright (C) 2006-2007 Adobe Systems Incorporated and its licensors. All rights reserved.

  Project: c:\knowledgecenter\knowledgecenter.xpj

  Layout: WebHelp.

  Output:! SSL!\WebHelp\Index.htm

  Scanning for the compilation project...

  Error: Impossible to analyze all project files.  Please use RoboHelp to recover the project.

  Unexpected error: failed to prepare the data of the single source for RHCL. Please try to compile in RoboHtml.

  I tried deleting the cpd and the project from the hhp file - has not made a difference.

  Help!

  Thanks in advance,

  Claudia

  Thank you.  What I discovered yesterday, it was that after the project SVN on my local machine to test the command line build process, somehow some of the FPJs was missing!  Because the folders containing the missing FPJs were empty, I guess GUI HR could ignore and compile correctly.  It turns out that I have somehow missed tried all FPJs in source control.  Once I got all the archived FPJs, when I refresh svn at the local level, the construction of the command line worked well.

  Kind regards

  Claudia

• indesign error Impossible to extract into a directory temporarya

  Hello Forum,

  I have a problem on the indesign installation:

  the following message appears: error: impossible to retrieve indesign in a temporary directory.

  The installation process stops.

  Greetings

  DB

  Place your installation files a directory desktop and, if os win, right click on the exe file and click 'run as administrator '.

• Error: Impossible to clone the volume mounted on ' / ' to 'servername '.

  I'm doing a P2V for one of my Debian Linux server.

  I use coverter 4 autonomous.

  FAILD conversion each time to 3% with this error: impossible to clone the mounted volume on ' / ' to 'servername '.

  Here is the log file attached.

  I really need your help.

  Thanks in advance.

  where the VM helper is that it can resolve the hostname smtp2?  Can you try to do this by IP...

  Don't forget, the VM helper (according to its IP address and where it is connected within vSphere) must be able to communicate with the system physical source via SSH.

  The agent job, just before the failure:

  > \[2010-07-07 12:15:41.384 info B02CEB90 "[task-1'] Exception caught during the copy of volume: ' /usr/lib/vmware-converter/copyFileSystem.sh--sshClient/usr/lib/vmware-converter/ssh - root - host smtp2 - port 22 user - sourceMountPoint /-targetMountPoint/mnt/p2v-src-root / sshConfigFile--/usr/lib/vmware-converter/ssh.conf--sourceTarOption--rare ' failed." Return code: 2; Message:

  > / usr/lib/vmware-converter/ssh - z f /usr/lib/vmware-converter/ssh.conf root@smtp2 Pei 22 "tar - one-file-system - sparse-C / / CF-. » | tar - digital-owner/mnt/p2v-src-root - C / y - xf -.

  >ssh: could not resolve hostname smtp2: temporary failure in name resolution

  Kind regards

  Jonathan

  B.SC., RHCT, VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• Error: Impossible to clone the volume mounted on "/" from "ip address."

  Hi, I have a question that the title is consistent with the provisions.

  I use vmware vcenter standalone 4 running under windows xp, convert CC4 to esx3.0.2, and I assigned the IP statiic virtual machine help and dns server.

  When it operate at 98%, it turns out the title: error: impossible to clone the mounted volume on "/" from "ip address."

  I searched Google, it was said by someone, converter does not recognize the volume of software raid.but I also tried the hardware raid of CC4, the result is the same as above.

  So who can help me. I have download all the log files.

  Thank you.

  The reason is a failure, it is that tar fails after spitting on too many of these errors:

  tar:. / var: 2008-10-24 08:02:37 time stamp is 4243881.056239962 s in the future

  This issue is described in the release notes: http://www.vmware.com/support/converter/doc/releasenotes_conv40.html#76

  Whenever the 4.0.1 ships we will prevent it from causing the P2V fails, until then, you will need to repair the clocks on 1 or two of your systems.

  (If your question has been resolved please check the responses as 'Useful' or 'Correct').

• Starting impossible, getting TFGHT is compressed error

  Original title: windows startup problem

  What is "TFGHT is compressed, means when windows startup fails?

  What is "TFGHT is compressed, means when windows startup fails?

  Looks like a variant of NTLDR is compressed.   For example perhaps in the compression of an entire drive even the file that points to NTLDR could get corrupted in a common way and therefore produce this strange message?

  Ref:

  http://SG.answers.Yahoo.com/question/index?QID=20060805030051AAHs8W6

  (BING search engine for)
  unpack the NTLDR
  )

  First of all remember for the future you shud never compress the partition primary (one where your operating system is installed).
  

  FYI

  Robert Aldwinckle
  ---

• When you attempt to update Flash I'm impossible to decompress the metafile file error.

  I'm running Windows 7 Professional 32 bit.  I tried this update in several ways without success.  I need some ideas.

  It must be a false positive by your av software. the page appears to me.

• Why MATLAB cannot read wav files OR? Mind wav compression errors.

  I write, 1-n-channel, 24-bit wav files using the standard vi OR its file Open/Close/Write (DBL) found in LabVIEW 8.6\vi.lib\sound2\lvsound2.llb. This application data are acquired from a NOR-9234 via USB-9162 or NOR-cDAQ-9172. My wav files are readable by many readers of wav, including media player file (channels 1-2), SoundForge, and my own readers of LabVIEW wav file. However, MathLab is unable to read these files, saying they cannot deal with compressed wav format. As we read in the documentation of NOR, these files are decompressed. I found a player wav to header via the discussion forums and read my wav file. The compression code that was printed was-2 instead of 1 for uncompressed. Anyone had similar problems reading in MATLAB? Someone knows something about the importance of a - 2 for compression? My guess is that there is a word size problem here that MATLAB cannot process or NOR is not properly function.

  Well, I learned a little more since last we spoke. The standard MatLab wav player is wavread.m. This script must be able to read multi channels 24 bit files; but he does not read files from LabVIEW. We find a change to this script, called wavexread.m, which was developed to read wav files that use WAVE_FORMAT_EXTENSIBLE. This format was developed by MS as an extended format to write multi channel + 24 bit files with more information included. LabVIEW wav files are readable by MatLab via the use of this script. Basically the script ignores formatting as if the compression for the PCM format setting was set to 1 (instead of-2 or, as we know it, "FEFF"). I tried rewriting the file binary wav and replaced the "FEFF" with "0100". This file is readable by the wavread.m of stock but not the wavexread.m extended; hiliting besides the fact that MatLab do not really care.

  However, I'll throw this back order to ask whether it is really necessary to use the extended format to write these files when the standard format would be sufficient. It sure would have made life much easier if my client did not need to worry about this.

  Thanks for your help.

• C4795 Scanner error, impossible to copy or scan.

  After replacing the color cartridge, tried the alignment process, received the message "print the alignment page...". "and that's how it goes. I leave the alighment and I get the error "Scanner, impossible to copy or scan. I performend power down hard recycle several times and still get the error message Scanner, turn on again. I don't know what else to do. I need to be able to scan documents. Please help if you can. Thanks, Ron

  I tried all the recommended resolutions and none of them worked. Now, I have a C4795 printer and went out and bought a new AIO Printer/Scanner/Copier.

  Thanks for the help.

  Ron

• Two-node Rac (11204) Cluster node 1 has failed to stop with error: impossible to get in touch with the loan of cluster service. duty to force stop

  Newly build Production environment (don't use it yet)

  OS: Linux redhat 64-bit 2.6.18

  Cluster version: 11.2.0.4

  This environment clusterware installed last December, we are trying to install oracle RDBMS, so try to first stop the crs.  However on node 1, the v$ asm_diskgroup shows nothing under total_mb /free_mb on diskgroup OCR.  and stop the crs shows: impossible to get in touch with the loan of cluster service.

  Alerts cluster log shows below:

  2014-03-25 03:50:01.429:

  [crsd (8608)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u00/app/11.2.0.4/grid/log/oprd100/crsd/crsd.log.

  2014-03-25 03:50:01.433:

  [crsd (8608)] CRS - 0804:Cluster Ready Service interrupted due to the Oracle Cluster registry error [PROC-26: error when accessing the physical storage]

  ]. Details at (: CRSD00111 :) in u01/app/11.2.0.4/grid/log/orpd100/crsd/crsd.log.)

  2014-03-25 03:50:02.123:

  [ohasd (12490)] CRS - 2765:Resource 'ora.crsd' failed on the server "orpd100".

  2014-03-25 03:50:03.407:

  [crsd (8623)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/11.2.0.4/grid/log/orpd100/crsd/crsd.log.

  2014-03-25 03:50:03.411:

  [crsd (8623)] CRS - 0804:Cluster Ready Service interrupted due to the Oracle Cluster registry error [PROC-26: error when accessing the physical storage]

  The NEWSPAPER of the ASM alerts:

  Wed Mar 25 03:21:49 2014

  WARNING: Waited 15 seconds IO to write to the disk of PST 1 in Group 1.

  WARNING: Waited 15 seconds to write IO to disk of PST 2 in Group 1.

  WARNING: Waited 15 seconds IO to write to the disk of PST 1 in Group 1.

  WARNING: Waited 15 seconds to write IO to disk of PST 2 in Group 1.

  Wed Mar 25 03:21:49 2014

  NOTE: process _b000_ + asm1 initiating (21071) 1.1807368888 disk offline (OCR_0681_2EF4) with mask 0x7e in Group 1

  NOTE: process _b000_ + asm1 initiating (21071) 2.1807368889 disk offline (OCR_0681_2EF5) with mask 0x7e in Group 1

  NOTE: check PST: grp = 1

  GMON seeking ways of disc for Group 1 to 5 pid 27, DiSo 21071

  ERROR: read no quorum within Group: required 2 found 1 records

  NOTE: audit PST grp 1 fact.

  NOTE: start the PST update: grp = 1, dsk = 1/0x6bba42b8, mask is 0x6a, op = clear

  NOTE: start the PST update: grp = 1, = 2/0x6bba42b9 dsk, mask is 0x6a, op = clear

  GMON update modes of disk for the Group 1 to 6 for 27, DiSo 21071 pid

  ERROR: read no quorum within Group: required 2 found 1 records

  Wed Mar 25 03:21:49 2014

  NOTE: disassembly of the cache (not clean) Group 1/0x35AAB27B (OCR_DATA)

  WARNING: For disk offline OCR_0681_2EF4 0x7f mode failed.

  2 node rac cluster is normal.  We were able to stop the crs without force.

  What should I look at to understand what is happening here?

  Thanks to adavnace.

  WARNING: For disk offline OCR_0681_2EF5 0x7f mode failed.

  NOTE: e-mail CKPT suspend pins Unix process pid: 21073, image:

  No default value is 1 M

• Discover the State of the agent (16) composer initialization error: impossible to activate the license of the software (expected 1650 seconds)

  Hello

  I have problem in View 4.5. When I create the new office with Windows 7 32 bit pool, pool automatic, floating, connected clone, fast prep. After the deployment of Windows 7 machines they had to customize report. After a few minutes's status has changed error (error state View Composer agent initialization (16): impossible to activate the license of the software (expected 1650 seconds))

  Could you please help me, where is the problem?

  I bought licenses for the view with the composer.

  My environment are:

  2 x vCenter server 4.0.0 build 258672 (windows 2008 r2 + Composer 2.5.0 - 291081)

  4 x 4 ESX u2 (2xESX by vCenter server)

  2 x display connection servers x86_64 - 4.5.0 - 293049 (Windows 2008r2) as a single environment. View environment using the server vCenter + 2 composers

  Thank you

  You have KMS license in effect for your Windows 7 Machines.  If this isn't the case, that is the question.

  You have 4 options:

  Option 1: Get KMS licenses in place for Microsoft Win7. -by far the easiest.

  Option 2: Use SYSPREP instead of QuickPrep

  Option 3: Add 1 at a time and activate the link manually clones b4 customization finishes - pain in the rear. Or be creative if it's your test env.

  Option 4: Hack the key "reg" activate this supossedly a composer. Here is the info:

  HKLMsystem/CurrentControlSet/services/vmware-viewcomposer-ga/SkipLicenseActivation to '1'.

  Of course the Win7 Office will be up to the period-eval evaluation mode expires but can be useful in a temporary unit or POC.

  The foregoing is not tested I tried it in my environment but do not know if it works because I don't want to mess with my installing any further until my POC is complete.  But it seems to work.  I found no key but went ahead and created.  Seems to work.

  Larry