bought a wireless Epson printer SX420W and my machine will not recognize it
Original title: I bought a wireless Epson printer SX420W and my machine will not recognize it. I have installed the software disk but it does'nt just seem to recognize my new printer.
Have you contacted Epson support?
http://www.Epson.com/cgi-bin/store/support/SupportContactsEmail.jsp
What did say?
Colin Barnhorst
Tags: Windows
Similar Questions
-
Have you installed the printer & software driver... will not recognize the installation of the scanner or Nikon camera to download photos... What can I do?
The duplicate thread information:
Cannot connect Epson scanner/Nikon camera to printer!
Hi Carolyn has Culp,
Thanks for asking this question to Microsoft Community!
I understand that your scanner and Nikon camera is not getting recognized in windows vista.He would be grateful if you could answer these questions. This will help us to a better way to get a resolution of the issue.1. have you made changes on the computer before this problem?
2. What is the brand and model of the scanner?
3. are you an error message or error code?
4. is that your other USB devices work?I would suggest trying the following methods and check if it helps.Method 1:
Try connecting to another USB port and check if the camera is detected or try to plug the camera on another computer.Method 2:Hardware devices do not work or are not detected in Windows: http://support.microsoft.com/mats/hardware_device_problems/en-usMethod 3:Remove and reinstall all USB controllers.To remove and reinstall all USB controllers, follow these steps:
(a) click Start, run, type sysdm.cpl in the Open box, and then click OK.
(b) click on the Hardware tab.
(c) click the Device Manager button.
(d) expand Bus USB controllers.
(e) right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
(f) restart the computer and reinstall the USB controllers.
(g) connect the removable USB storage device and perform a test to ensure that the problem is solved.
Method 4:To update the chipset drivers and check if it helps.Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly
Reference:The problems of scanning: http://windows.microsoft.com/is-IS/windows-vista/Troubleshoot-scanning-problemsIt will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.
-
I run a Mac Pro with El Capitan and iMovie 11 will not recognize my camcorder Sony FDR-AX35P 4 K
I run a Mac Pro with El Capitan. iMovie 11 will not recognize my camcorder Sony FDR-AX45P 4 K. He keeps asking connect a camera.
iMovie 11 (version 9) supported cameras include not all models Sony FDR. iMovie 10 supports a number of FDR-AXxx models however does not list your a see particular: iMovie support cameras - Apple Support
There are a number of problems of running iMovie 11 under El Capitan, particularly with still pictures appears. (It does not supports video 4K). I recommend try iMovie 10.1.2 which you should be able to get in for free or may already have in your applications folder. Although your camera model in particular is still not listed, I would expect it would probably work, and failing that you should be able to read files directly from the SD card if you put in an SD card reader.
Geoff.
-
I recently bought a new computer with Windows 7 installed and much to my dismay found my Microsoft Wireless Comfort Keyboard 4000 and Wireless Laser Mouse 5000 are not compatible with Windows 7. If no fix that means I have to start avery good keyboard and mouse I used comfortable for a long time.
When you try to load from the disk, the message informed me that it was not compatible and use the automated system to find a fix has not produced an answer. My keyboard and mouse are in great shape and it is not necessary for me to replace it with a new one from a material point of view.
The drivers for both devices on the drive that you are probably older versions, you should be able to download the latest drivers for Windows 7 in the pages below, you will need to choose which version of Windows 7, you are running, that is, 32-bit or 64-bit.
Wireless comfort keyboard
http://www.Microsoft.com/hardware/en-us/d/wireless-comfort-keyboardWireless Laser Mouse 5000
http://www.Microsoft.com/hardware/en-us/d/wireless-laser-mouse-5000If the above is not your exact devices check for them on the next page:
Microsoft Hardware downloads
http://www.Microsoft.com/hardware/en-us/downloadsKind regards
-
HP Photosmart C3100 model Q8160A printer shakes and rough route - will not be printed.
HP Photosmart C3180 do not print correctly. The printer runs very rough, shakes and the admission document is jerky and does not print letters etc. Recently, I changed my cartridge and he had checked. Its fine and allows to print on another printer. I searched and found nothing to help. If all goes well, there is an answer because it is really a nice printer, scanner, etc..
If the printer works very rough, shaking, etc., then it has a hardware problem and you will have to contact HP. If the printer is older, chances are it will be cheaper to get a new one rather than trying to get yours fixed. You can always open it and see if there is nothing obviously wrong with the guts of it.
I hope this helps.
-
Hello world. I, m Bengt from Sweden. Unable to connect wireless epson printer for my aspire m1. I tried the drivers of each possible site, epson, windowsupdate and more with no success. Can you help me?
Great! There is a material error in the printer! I'm going to usb it for now. Perhaps by a new printer, later! Best regards
Bengt
Thanks for a good and fast support! -
I have an epson printer p950 and try to print from lightroom. I get lines across the image and Epson tell me I need to contact you to find out how to slow printing
Suggest you to reset preferences in Lightroom and then, check out: to zero (or "Screw up") the preferences of Lightroom - Lightroom Forums file
-
Have 2 printers on the computer and the PC will not print one when you switch to the other?
Have 2 printers on the computer and the PC will not print one when you switch to the other?
Having a printer at the office and one at home, but use the same PC for both? Unable to print at home after bring you it to the office (and vice versa)?
If you USB, most of the time, the PC will recognize what printer is which. Sometimes PORTS does not commute. You can manually change the correct ports if necessary.
CLICK ON THE MENU START
1 devices and printers
2 right CLICK on the printer
3. choose the PRINTER PROPERTIES
4. click on PORTS
5. There will be a list of ports with one (checked marked). If it's on the wrong port, change to the right pair and choose APPLY.
(NOTE: it must ALWAYS be on a USB port or a wireless connection.) Some ports wireless start with a #(adresse IP) or a SERIAL number)
I hope this helps. Sometimes, you can create your own port if you have more questions.
-
Problem with wireless - Vista Network and Sharing Center does not recognize my connection!
I use the Home Visa software and my network and sharing Center does not recognize my connection but I can access the internet without any problem. Previously, I was using a wireless router Linksys with an old box of AT & T internet with no problems. The problems started after I updated my AT & T internet box that made obsolete the linksys router and now the network share does not connect. I just have the problem of getting the network and sharing device recognizing that I am actually connected to a wireless network. I can't use my printer or share files with other people. I can't get my wireless printer to work if I restart my computer and I have the documents I want printed already sent to the printer. My network and sharing Center also works very well for a few seconds when I start my computer then it turns off again.
Hello
Method 1:
Windows wireless and wired network connection problems
Method 2:
You can also view the related items for more information.
The problems of Internet connectionhttp://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems
Network connection problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
Solve problems, find wireless networks
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks
Method 3:
Setting up a wireless network
http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network
Wireless network card: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions
See also:
Connect to a network with Windows Vista wireless
-
I bought the IPad Pro 128 GB on 3.29.2016. I used it for less than a week. It charged when I first opened it from 67% to 100%. 9.3.1 update. After about 5-6 days, the battery is down to 1%, and now it will not load. I have reset to factory settings and it still doesn't load. There's just 1%. Help, please.
Thank you
Katie
It is under warranty. Suggests taking it for an Exchange.
-
Bought a second hand iphone 5 and my seller did not remove device to find my iphone and im too poor to buy a fresh iphone and my country does not have a retail store, so how do I get it removed icloud? Its imei is *.
Nobody here can help, and Apple will not help you to overcome the blocking of activation. If the seller does not cooperate and remove the unit from their iCloud account, then you will never be able to use this device yourself.
-
HP Deskjet D4160 printer with the Windows XP computer. My printer is working, but it will not be printed in color and a new color cartridge is installed - what can I do?
The steps in this troubleshooting page can help solve the problem.
-
I have never installed my MS when I bought my PC and now it will not accept the product key, how can I get a new key
What "MS"?
Microsoft is a company, not a product.
To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag tool
(download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )
Once saved, run the tool.
Click on the button continue, which will produce the report.
To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
-* in your own thread *, pleasePlease also state the Version and edition of Windows cited on your COA sticker (if you a) in the case of your machine (or inside the battery compartment), but does NOT quote the key on the sticker!
http://www.Microsoft.com/en-us/howtotell/hardware.aspx -
HP Photo Smart 110 will print and copy but will not scan for Mac.
Recently switched to Mac computer HP. My HP Photo Smart 110 will print and copy but will not scan for Mac. I need to download a program for my Mac for scanning?
Thank you!
OK, take a look at this document; http://support.HP.com/us-en/document/c03379337
Scroll to the frequently asked questions and click on one of the way to analyze the options. It really depends on how you installed your printer, but you should be able to use the print window & scanning.
Let me know if works
-
For Windows 7, it will not recognize my printer HP Color LaserJet 2600n as a printer, and I see no download on the HP site, all solutions?
Hello DavePerdue,
Thank you for your message. Click HERE for your driver from the HP website. It seems that it just took some time to get the driver online and available for download.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
How to copy music on the iPod?
The hard drive of my computer completely bitten the dust recently, information was unrecoverable. iTunes is able to retrieve the music purchased by Apple, but can really help with a music that has been installed from albums, CD I own is no longer as
-
How can I combine an old file history browsing in the current?
Several weeks ago my PC C: drive has been replaced, and Firefox has been recreated before I could copy on my old profile to the new drive. Now I want to recover the old browsing history, but of course the new profile already has his own, more recent
-
When I turn on my laptop, it works fine for a little bit, and then after some time (usually when I do an antivirus check) a blue screen comes up saying "windows xp has been closed because the file"kernel_inpage_data_error"does not work or something.
-
Cannot set the time zone of Moscow winter + 3 hours.
Cannot set the time zone of Moscow winter + 3 hours.Set the time zone Minsk 3 after the GPS clock moves forward 1 hour, timezone is set back from Moscow + 4.It is an error of your software when you are ready to address this issue.
-
SignalExpress Tektronix License Manager
I'm still the site administrator for LabVIEW SignalExpress Tektronix Edition licenses (used by the Tektronix sales force to sell SignalExpress TE) and I still have the same computer, but it's switching me from XP to Win7. The same License Manager sof