box no boot

Similar Questions

• The Boot Camp Partitions drive and abandon

  I am running OS X El Capitan, Version 10.11.5 early 2016, 12 inches and I am trying to load Windows 8.1 Pro using Boot Camp.  (ignore what is in the product box)

  Boot Camp successfully created a program loading of Windows, including the Apple drivers on my USB.

  I was able to successfully partition my HDD 256GB.  50 GB for Boot Camp and ~ 200 GB for my OS X.

  After the partition, the Boot Camp program is finished and I have a screen with my Mac OS disc and my Boot Camp disk.   My Boot Camp drive is completely empty.

  When I restart the Boot Camp, I gives me the possibility to remove the disc from Boot Camp.

  How can I load Windows 8.1 on my Boot Camp drive?   Should I delete the disk Windows/Boot Camp Partition and start again?

  Macs 2015 and more late do not use a USB Installer. Disconnect the external storage, launch BCA, delete the current Windows partition and start all over again. You must put the ISO of Windows in your Documents folder and it must be dismantled.

  Please see https://help.apple.com/bootcamp/assistant/6.0/#/bcmp173b3bf2 for help.

• Acer gateway ne570 won't boot upward and I tried the bios and it always detects the hard drive

  I have an acer gateway ne570 and it does not start and I tried the bios and it always detects the hard drive but first boot priority is boot windows which is the only thing on the menu Manager startup options when you press on enter where the box "no boot device, press a key" comes after starting the laptop and when the gateway logo appears. I've had for over a year and the hard drive still works and my laptop didn't come with a recovery or recovery usb drive. And I also used the alt + f10 button that linked me right back to square "no boot device, press a key. Anyway, what should I do?

  you need a PC to use the tool of creation of the windows window.

  to boot from the CD or USB, press F12 on startup and choose the correct boot device.

• How do I go back on the Startup dialog box

  Before I didn't know better, I checked "do not show again" on the dialog box to boot (which shows all recent documents and allows you to create a new document).

  I can't understand how to re-enable it.  Any thoughts?

  Thanks in advance,

  AI - CS6

  Mac OS X 10.8.5

  Hi Jeff,

  The Welcome screen has been removed in AI CS6.

  Kind regards

  OM

• Logins: Message ACWLIcon.exe

  Hello

  I've just updated the logins on my Thinkpad Edge 13 and now it does not work! During the boot sequence, I get a dialoge with the message box:

  "? SaveSMPDU@AcWanAdapter@@UAEKU_AC_SMS_PDU@@V?$basic_string... cound not be loceted in ACON.dll DLL"

  I searched the lenovo support site and downloaded the "latest" version of dial-up connections, it is v5.83.

  Wireless worked perfectly until I did it and I don't have the dialog box while booting!

  Help please!

  Ta

  Steve

  You can try to download ccleaner.com is a free tool and then uninstall the dial-up connections and then run ccleaner registry cleaner a few times (remember you save changes when prompted) and then reinstall AC

• HP Pavilion 15 laptop: brightness HP Pavilion 15 notebook pc problems

  Hello world
  I'm having an annoying problem on my brightness on my laptop 15 Pavilion...
  When I press on the butoon to decrease, it increases instead... when I press the button to increase, it decreases...

  When its brightness, energy saving mode increases instead of decreasing
  Sometimes when im using my laptop randomly, the brightness changes.

  Is there a fixed solution to this problem?
  Thank you

  Hello

  It is a common problem for laptop with Intel N3540 processor in Windows 10.

  Here's a solution posted by GM_823:

  Follow this

  1 window + X

  2. open the Device Manager

  3 drop down graphics cards

  4. right click on your graphics card (mine is Intel(r) HD Graphics)

  5. click on disable. Screen will be the blackout for a few seconds.

  6. once it returns, again right click and click Activate.

  7. try your brightness keys.

  If the problem persists after restarting, you can consider the option of quick start

  To turn off the quick start:

  1 open Power Options in Control Panel

  2. choose ' choose what the power buttons»

  3. click on the "change settings that are currently unavailable".

  4. under stop settings uncheck the box Fast Boot.

  5. restart Windows

  Hope this helps.

• How can I get my laptop out of safe mode and back 2 normal?

  How can I get my computer out of safe mode

  It is what is on the link below in REVERSE order.
  The link is on the way to get into Safe Mode; but the instructions I give you is out!

  http://www.bleepingcomputer.com/tutorials/tutorial61.html

  Go to the above link >summary > Vista

  Start Vista normally
  Uncheck the boot under the STARTUP tab

  Using the method of System Configuration tool:

  Note: If you have problems to enter Safe Mode using the F8 method, don't use this method to force so that it starts in mode safe. For reasons that why you should read this.

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on start () button.
  3. In the search box of the Start Menu () type msconfig and press enter on your keyboard.
  4. The System Configuration utility will open and you will see a screen similar to the one below.

     
     Figure 8. Vista System Configuration utility

     Click the Startup tab.

  5. You will now be on the screen start as shown below options.

     
     Figure 9. Tab of Vista startup in the System Configuration utility

     Uncheck the box secure boot

  6. Press apply and then press the OK button.
  7. Now, you will see a prompt stating that you must restart the computer to apply the change.

     
     Figure 10. Reboot prompt

     Click Restart to restart your computer.

  See you soon.

  Mick Murphy - Microsoft partner

• Unable to get the computer out of safe mode

  Remove my computer in Mode safe and return it to a Normal Mode

  * original title - get my computer out of safe MODE and return to a NORMAL MODE. I almost tried everything and I hate the thoughts to start over and lose all my info computers *.

  Remove my computer in Mode safe and return it to a Normal Mode

  Hey Sissyspkc1

  Follow the steps below

  Close all running programs and open the windows if you are back on the desktop.

  Click on the Start button (en).

  In the Start Menu () search box type msconfig and press enter on your keyboard.

  The System Configuration utility opens

  Click the Startup tab.

  Clear the check mark in the box secure boot and under the general tab, select the Normal startup option. One or the other of these options are not available

  Press apply, then the OK button.

  When the program prompts you to restart, allow it to do, and you should boot into normal mode in Windows Vista.

  Walter, the time zone traveller

• Windows Vista is stuck in Mode safe

  I'm trying to get my computer out of safe mode and it does not work. I press the f8 key while it is booting and the start menu appears. I then select the option for windows to start normally, but it always ends up back in safe mode. I'm not what else to do.

  Make sure that the secure boot checkbox is disabled
  
  And select Normal startup in the Configuration of the system.

  Read the information below.

  http://www.bleepingcomputer.com/tutorials/tutorial61.html

  Click Table of contents in below link for Vista.

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Using the method of System Configuration tool:

  Note: If you have problems to enter Safe Mode using the F8 method, don't use this method to force so that it starts in mode without failure. For reasons that why you should read this.

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu () type msconfig and press enter on your keyboard.
  4. The System Configuration utility will open and you will see a screen similar to the one below.

     
     Figure 8. Vista System Configuration utility

     Click the Startup tab.

  5. You will now be on the screen start as shown below options.

     
     Figure 9. Tab of Vista startup in the System Configuration utility

     Make sure the box secure boot is disabled

  6. Press the apply button and then press the OK button.
  7. Now, you will see a prompt stating that you must restart the computer to apply the change.

     
     Figure 10. Reboot prompt

     Click the restart button to restart your computer.

  See you soon.

  Mick Murphy - Microsoft partner

• Use of XPS 8700 MSATA

  I bought a 32 GB MSATA disk and installed in my XPS 8700 system. Then I went to see how to activate, or to see if it is installed and working. Problem is that I can't find anything that says it's there. I noticed that nothing in the BIOS, nothing in Device Manager and nothing in the technology Intel Rapid Storage Technology software. I expect that somewhere I need to have to turn on the port (maybe auto recognized) somewhere, I need to configure for setting cache, and somewhere where I can at least see it's there and do what he's supposed to do. Any ideas how can I check to see that it makes there job?

  Windows V8.1, 8GB Dell XPS 8700, 1 to, nVidia 635

  I found the answer and it is simple supper.

  When Windows 8, open msconfig.exe and the value of the checkbox Start secure on the Startup tab.

  Reboot your system and use the F2 key to access the bios. Go to advanced settings, on the aircraft and change the SATA AHCI mode to the RAID. When you choose Save, your system will restart and this time let it boot mode safe.

  While pilots will be changed mode without failure. You can check the Device Manager if you like and you will see an entry in for the Intel Desktop/Workstation... storage controllers. Open new msconfig.exe and uncheck the box secure boot. Close it, and then restart in normal Windows.

  Now, you can configure your MSATA drive as a cache for your HARD disk drive in the Intel® Rapid storage technology.

• How can I get my pc out of safe mode

  How can I get my pc off moder safe. Reset did not have it.

  How can I get my pc off moder safe. Reset did not have it.

  If you mean every time that you start your computer, it will start in sfae mode, then try this method...

  Login to your admin account > start button > in the search box, type msconfig > Enter > click on start up > y at - it a tick in the box "Safe boot"?

  If so, uncheck it > make sure that there is no check mark all > click OK when finished.

• How can I make my original Windows 7 bootable again?

  I really need someone who has been in the wars to dual-boot.

  I had a beautiful work of installation of Windows 7, then thought I would try dualboot Windows 8.  I installed Win 8 on a clean partition.  But something went wrong and get the choice of Windows 8 and Windows 7, when I started.  Kick directly to Win 8 and never gave me any options or settings to change.  Tried to deceive it by acknowledging the origin o/s, but not go.

  Because win 8 was not made for me, I tried to format the new partition and installed a second Win 7.  I thought that she would recognize the other Win 7 and set up the old familiar dual boot, in the end, I got exactly the same problem.

  Then I tried to use edit bcd.  I saw there is no entry at all for the original score of Win 7, so I cerated a new ID and copied all the parameters of the new Win 7, with the exception of the device (partition).  I added my new partiion of the sequence of sboot and fails.  Who has worked almost: when I restarted I got the o/s selection screen, but when I chose the old o/d, it shielded blue.

  I figire far I have either some few details wrong in BCDedit, or I'm missing something fundamental.  At this point, all I want to do is boot in my good old Windows 7.

  Can anyone help?

  How dual boot Windows 7 and Windows 8
  http://www.PAGESTART.com/win8cpdb02171201.html

  The goal here is to create a Windows 7 and Windows 8 Dual Boot computer while protecting your investment in Windows 7 (if problems arise) or do you simply not not to continue to use Windows 8.

  ==================================================

  EasyBCD - how to remove the invalid entry:
  http://NeoSmart.NET/DL.php?id=1

  When you run EasyBCD, you will see the following great tabs/buttons on the left.

  (1) the display settings: displays the number of entries (bootable version valid and is no longer valid to Windows). The one marked 'default' in the version of Windows that starts if you sit and wait 30 seconds without making a selection using the keyboard. The entrance of remaining are classified by 'Name' (unless renamed all entires will call Windows 7). Drive letter represents the partition that version. If everything you have installed multiple copies on Windows 7 is the way "Bootloader" will always be the same.

  (2) menu of Boot edit: four options 'Up', 'Down', 'Rename' (is very convenient if you want to see a significant name when you first start (I have 5 versions of Windows on one of my test systems, so I reamed the plain jane "Windows 7" "Windows 7 Pro 64-bit" and "Windows 7 Home Premium 32 - Bt, etc." ").)
   
  The last option is "Delete", click on the entry of is no longer valid (for highlight), and click 'delete '.

  You will see also a check mark 'default' (when the 30 timeout expires) version Windows, the computer will start to place a check mark to the one you want.

  Located at the bottom of 'edit Boot Menu' page is the time-out value, if you want automatically to your only remaining version of Windows just place a check mark in the box "Skip boot menu."

  When your done with your changes, be sure to 'Save Settings'.

  J W Stuart: http://www.pagestart.com

• my keyboard works aftr windows is fuly began

  my keyboard works only aftr windows is fully booted

  for this reason, I can not select Safe mode

  • Click the Start button
  • Type msconfig and press enter
  • Click on the Startup tab
  • If you dΘmarrez multiple selection of OS (click on) the Windows 7 operating system
  • Click to check the box secure boot
  • Click OK

  Restart the PC when prompted.

  Uncheck the box in safe mode to return to a normal startup.

  Tricky

• How to remove the upgrade Windows 7 Professional of D:-drive?

  I bought Windows 7 Professional Upgrade from Windows Vista Home Basic. HUGE MISTAKE! On the Microsoft Store is a nightmare. Finally, I just received a refund. Now, how do the Windows 7 on my D drive where is where idiots to the Microsoft sortore had me download in the first place. now I have vista on drive c and one broke * windows 7 on drive d. HELP, apparently, not a microsoft support t know how?

  If the Visa is still functions (you can load a running Vista), then install EasyBCD and follow the instuctions for EasyBCD listed below. When you are finished with the removal of Windows 7 in the boot (according to instructions) menu, then you can reformat the D: partition, which is where you said Windows 7 was installed.

  ================================================

  EasyBCD - how to remove the invalid entry:
  http://NeoSmart.NET/DL.php?id=1

  When you run EasyBCD, you will see the following great tabs/buttons on the left.

  (1) the display settings: displays the number of entries (bootable version valid and is no longer valid to Windows). The one marked 'default' in the version of Windows that starts if you sit and wait 30 seconds without making a selection using the keyboard. The entrance of remaining are classified by 'Name' (unless renamed all entires will call Windows 7). Drive letter represents the partition that version. If everything that you installed multiple copies of Windows 7 and Vista the path "Bootloader" will always be the same.

  (2) menu of Boot edit: four options 'Up', 'Down', 'Rename' (is very convenient if you want to see a significant name when you first start (I have 5 versions of Windows on one of my test systems, so I reamed the plain jane "Windows 7" "Windows 7 Pro 64-bit" and "Windows 7 Home Premium 32 - Bt, etc." ").)
   
  The last option is "Delete", click on the entry of is no longer valid (for highlight), and click 'delete '.

  You will also see a check mark in the "default" (when 30 timeout expires) version of Windows (vista in your case), the computer will start to place a check mark to one you want to keep.

  Located at the bottom of 'edit Boot Menu' page is the time-out value, if you want automatically to your only remaining version of Windows just place a check mark in the box "Skip boot menu."

  When your done with your changes, be sure to 'Save Settings'.

  J W Stuart: http://www.pagestart.com

• Inspiron 660 do not accept the re - install with disc

  Originally after a diagnosis has been run reason to slow down and random behavior it showed the error of HD.

  (2000-0142 error code)

  validation; 93488

  Message; Hard Drive 0 - s/n 9vpgkhob short unsuccessful plateau

  I did some research but couldn't access one of the solutions that will included in 'Safe Mode'

  During one the many times where I had on my desk with internet access, I got a system error pop up. "ktmw32.dll is missing."

  My pc is about 2-3 years and I never have a backup OS to order it the Dell disks.

  They came a few days ago but won't work for me.

  So now I turn on, Dell logo comes up then a few seconds later a box; "Windows Boot Manager".

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

  1 - Insert your Windows installation disc and restart your pc.

  2 - Choose your language settings

  3 - Click on "repair your computer".

  File: \EFI\Microsoft\Boot\BCD

  Status: 0xc000000f

  Info: Boot your PC Configuration data is missing or contains errors.

  I tried to do, but after the restart with the disc in I get the same message every time.

  Any help would be appreciated.

  Hello

  We recommend the replacement of hard disk for 2000-0142.

  Reinstalling windows or repairing the BCD is perhaps not a permanent solution to this problem.

  Thank you.