brand new designjet Z6200 60 "supposed to swing back? really?

Similar Questions

• New Designjet T520e unable to connect to the wired network

  I have a problem with a brand new Designjet T520e that can not connect to my network cable.  Said! No connection

  I can see the lights suitable for connectivity to the plug on the printer and on the switch.  Have you tried replacing it with cables and ports from the switch, the speed setting of port on both printers and spend 100 full instead of auto.   It connects to the wireless network, less desirable in this situation.

  All revelation?

  The cable was not the solution, but thanks fo RL suggestion.   support technique level 2 indicated that there is a problem with some of the T520 newest which will be fixed in an update of the firmware soon arrived.   In the meantime, they recommend a hard reset.

• Hi I have a brand new HP pavilion dm1 and I get a blue screen: BUGCODE_USB_DRIVER

  Since I started using my new laptop I randomly get a blue screen that says: BUGCODE_USB_DRIVER. The other info I got is the following:

  • OS version: 6.1.7601.0.1.0.768.3
  • Locale ID: 5130
  • Collection BC: fe
  • BCP1: 0000000000000008
  • BCP2: 0000000000000006
  • BCP3: 0000000000000006
  • BCP4: FFFFFA8004860000
  • Service Pack: 1_0
  • Product: 768_1

  I am using Windows 7 64 bit
  I don't know what to do. The only suggestion I got it that allow the system to restore everything as it was by the manufacturer. And I did it, but the problem has not been fixed.
  Can you help me please?

  If it is a brand new computer, you should immediately bring her back to your place of purchase or contact HP for repair or replacement.

• cartridges and printheads for HP DesignJet Z6200

  Produce you cartridges and printheads for HP DesignJet Z6200 or they have been abandoned? I can't find date of production of cartridges year 2014 in stores

  No, it is still relatively a new machine. No, it's not supposed to wait, go, these are great printers, I have 2 years Z6100 6 older old and still great.

• Brand new extreme air port cannot get wireless

  I bought a brand new port of extreme sir 3 days ago. I had my internet provider come out and check our signal. We have strong signal from the cable modem. I have internet when I run a cable directly on my Mac, but when I run this same cable ethernet on the port of extreme sir the light turns green, but the usefulness of the air port shows that I have no internet.

  I contacted Arris and they checked the modem and it works correctly. I have restarted the modem and did a hard reset on it so. Always the same question.

  Running the OS X El Capitan 10.11.3 the only thing that is old on all my systems is the Mac itself. Is not supposed.

  I had a time capsule connected to the modem and an air inlet extreme to extend wi - fi. Those that worked very well, and then two weeks ago, he stopped. I was able to reset the modem and get wi - fi for a while but it came out again. Cox has recommended the new air port extreme, which was probably necessary anyway, but always the same question.

  Any help is appreciated.

  I contacted Arris and they checked the modem and it works correctly

  Can you please provide the model number of the Arris modem?

  I had a time capsule connected to the modem and an air inlet extreme to extend wi - fi

  Sorry, I'm not clear on the question of whether the modem normally connects to the Time Capsule and AirPort Extreme, extends the... wireless signal or... If the modem connects to the Airport Extreme at the moment.

• HP Envy 15 t-as000: brand new HP Envy w / SSD: "Boot Device not found".

  Hello

  I have a brand new (less than 1 week) HP Envy 15 t-as000 w / a 256 GB SSD.  After the impeccable behavior for 1 week, the laptop can be started is no longer.  No boot device is detected.  If I try to run a diagnostic on the hard disk, the BIOS I was informed that it can not detect even a current hard drive (see image)

  I don't know what happened.  I'm very careful with my machines.  He has not been abandoned. It has not been dropped on, or taken any sort of somehow.  I just pressed the power button one day (yesterday) and I see this:

  

  Thanks for the tips. I followed your recommendations and sent the laptop to HP for replacement (I bought this unit directly to the output from the HP website).

  However, I am frustrated because after all taxes and transportation costs, I had to pay an additional amount of $10.  The total general of the replacement order was $739,79 against $730,90 for the original purchase.  Why am I penalized $ 10 ($8,89 to be exact) for a mistake that was not even my fault?

  Also, I had to pay $24,83 FedEx packaging to send the laptop back.  How was I supposed to know I should have brought the Moose with me to Seattle, WA in Ithaca, NY packaging because the SSD was going to fail in my college dorm?

  So in the end, my HP Envy $730,90 now goes to the identical replacement of cost unit $739,79 + packaging from FedEx $24,83 phone = $ 764,62.

  Bottom line: screw - up HP cost me $33,72!  Not the end of the world but still a ringing sound nice when you're not yet a career with a cushy salary of mickael elite.

• Brand new Lenovo G780 BSOD

  Dear Lenovo support,

  Yesterday, I bought my first laptop Lenovo, Lenovo G780 brand new. I installed Windows 7 Ultimate 64 bit. Immediately after installation, guess what, I am Blue Screen of Death and one more like 15 minutes ago. I have only 2 GB of RAM, and I noticed that the system often maximizes memory and have zero available RAM. What is the reason for BSOD? Can I upgrade RAM to 4 or 8 GB? What RAM I wait, DDR3? Please give me some advice or recommendations on what do I do? Thank you. I just, I can't accept that this is happening to the new machine.

  Hello, NINE.

  Well, I tried to disable the UEFI boot and then re - enabled again because no specific change occurred. No BSOD so far. I assumed it was a RAM memory because I remember BSOD message was "memory cache" or "cache manager. I will modernize just the RAM to 4 GB. Suppose I have two ram slots.

• Brand new computer laptop dv6z-7200 of envy has crashed after downloading updates from the window 27. ~

  I have a new notebook from dv6z-7200 desire I'm just to start this topic and it locked up and crashed. I restarted in test mode, it and ran the tests got an ok on everything. Then, I got a message saying that he would attempt a repair. Unfortunately, who did not, now he broke down again and I can't seem to do anything.i let windows update download 27 updated both swing myself for this. I think I should have downloaded one or two at a time, and then a reboot. now what should I do?

  I used to be snow white, but I drifted...

  Thanks for the reply. F11 does not work. laptop does not just start. try, but crashes. I disconnected and removed the battery for 30 seconds, replaced, tried again. nothing.  restoration will not be a big deal like it was brand new and I have had little on what anyone on this subject yet. you contact HP support. Thanks again.

• DesignJet z6200 - FILE FORMAT not supported

  Hello forum,.

  Our company just got a brand new z6200. When I try to send a job from my Mac desktop, it grubles a second, then says error 60:01 - unsupported file format. Tried to print documents, PDF, JPEG, PNG files word, always the same thing.

  Hooked to a laptop running windows 7 and it printed fine.  I updated the firm ware and installed the driver from the HP website.  I have a hooked so z3100 and there is no problem. I'm on Mac OS X 10.6.8

  Any suggestions on what to do? We need this printer to work from my Mac desktop. The customer service was ABSOLUTELY no help.

  Thank you!

  In order to print from a MAC, you need to purchase a kit of post script which then makes compatible MAC, its basic model that it will print through via web services or windows work stations. The post script kit usually is an upgrade of the chip or a software kit which is delivered on a usb key. If you go to the HP website and searching info for the Z6200 and optional upgrades/accessories can explain better. The lower end HP printers are purchased as a post script or not as vs T790ps T790. The higher end models are not separated from the printers, but to buy the kits to transform it into a model of post script.

• I have an old Mac Mini with a DVI Port that came with a VGA DVI-adapter.  Tonight, my monitor went down.  Brand new monitor works with that?  Can I use an adapter?  If yes should which adapter I?

  I have an old Mac Mini with a DVI Port that came with a VGA DVI-adapter.  Tonight, my monitor went down.  Brand new monitor works with that? Any recommendations? Can I use an adapter?  If yes should which adapter I?

  You can use any DVI monitor DVI port directly or have any VGA monitor with the power that you adapter. A HDMI monitor might work with an adapter DVI to HDMI in a pinch, but HDMI tends to be more fickle.

• How can I get my serial number or IEMI number for me to make an appointment at a genius bar or get help online when my iPhone brand new completely deserted?

  How can I get my serial number or IEMI number for me to make an appointment at a genius bar or get help online when my iPhone brand new completely deserted?

  The IMEI number is printed on the back of the phone, unless it's an iPhone 6. You can also find the serial number by eject the tray of the SIM card on the right side of the phone (insert a paper clip or similar object into the hole). It is in very small print at the bottom of the status bar.

  It should also be in the box the iPhone provided in if you bought Apple or an authorized dealer.

• I bought a brand new iPhone 5 s to the United Kingdom for use in New Zealand. When I'm in New Zealand and put the card sim inside (put a sim card in the first time), he said that it is not supported and it doesn't let me do anything else - cant even get i

  I bought a brand new iPhone 5 s to the United Kingdom for use in New Zealand. When I'm in New Zealand and put the card sim inside (put a sim card in the first time), he said that it is not supported and it doesn't let me do anything else - cant even get into the phone. Why has this happened?

  The United Kingdom, where did buy you it?

• AppStore crashes on my brand new ipad 9.7 pro, how to fix

  AppStore crashes immediately on my brand new ipad 9.7 pro, how can I solve this problem?

  That have you tried so far for example have you tried

  -closing of the application via the taskbar of the iPad ( force an app to close on your iPhone, iPad or iPod touch - Apple Support)

  -do a soft-reset/reboot of the iPad ("force restart" on this page: restart your iPhone, iPad or iPod touch - Apple Support)

  If they don't fix it you tried:

  -backup (purchases by copying on to your computer's iTunes library: file > devices > transfer purchases) and restoring the backup

  -l'iPad resetting to the factory settings (after copy purchases through your computer's iTunes library and the print out of documents and photos) and sync just the content back

• Can someone help me? I am trying to download iMovie which normally should be free with other Apple applications, but for full reason he always says that I have to pay for it. And I Shen a brand-new iPhone updated to IOS 9 5s. Can someone give me advice on

  Can someone help me? I am trying to download iMovie which normally should be free with other Apple applications, but for full reason he always says that I have to pay for it. And I Shen a brand-new iPhone updated to IOS 9 5s. Can someone give me advice on what to do?

  iMovie and iLife and iworks Apps are free with the purchase of a new device.

  Since Apple is no longer selling the iPhone 5 s, she cannot be considered more for free apps.

  However, just to be safe, disconnect you from the iTunes and App Stores-> Apple ID in the settings on the new iPhone 5 s, then reset the iPhone in now the home and power buttons together for 10 to 15 seconds. Let the iPhone reboot and then sign in with your Apple ID in iTunes and the App Store and try to get the Apps again.

• I don't see that I speak when I have FaceTime, but they can see me. Brand new 6th generation iOS 9.3

  I have a brand new iPod touch 6th generation. When I FaceTime, I don't see who I am talk - have just a black screen. But they can see me. And we hear the other just 9.3 fine.ios

  Test and test

  Force reboot

  http://support.Apple.com/en-us/HT201559