Bridge won't load - MAC

Similar Questions

• I installed Safari 10 update and now Safari won't load - ideas?

  I installed Safari 10 update and now Safari won't load - ideas?  In addition to the menu drop down go to preferences do not load.

  Writing an effective question of communities to Support Apple - https://discussions.apple.com/docs/DOC-5931

• Games won't load on Slingo... What do I do?

  Slingo turns on but when I try to play games; the games won't load

  May communicate with the site, and regarding the help.

  I can get into this site for example http://slingo.com/sgs/sample/1#ctrGame

  but probably I need to register to go further, and I have no interest in doing it. If it's a site that you can normally enter without registering have you tried with IE it works, so then post back and we'll see if there is anything, we can study together.

• Satellite Pro P200 - 17 c: Win XP won't load - installation of the SATA driver

  Hello

  I have a satellite pro p200 - 17 c I've had good years, allways worked without any problem.

  Last week when I booted the laptop, windows won't load and I find myself safe mode selection screen. No options whatsoever me to windows loading, I tried F8 and still nothing.

  I tried the restore cd that reimagee the drive but I get the same thing, I tried a new hard drive, once again the same.

  But if I try to load windows from an OEM to install that software does not because it is a sata drive and there is no floppy drive. I have an external floppy drive I use, but it is not known now.

  Any ideas or suggestions?

  Hello

  Go to BIOS and set it to default settings.

  In this case the SATA mode must be on AHCI. In this case the SATA drivers are required to install the Windows operating system. But as much as I know that Windows 7 already contains the SATA drivers if usually you don t had to add SATA drivers while OS installation the installation program.

  However, here is a nice HowTo document that helps you add SATA drivers for Win XP installation disc.

  + How to integrate a SATA AHCI driver into a Windows XP Setup CD.
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

  + How to integrate the AHCI driver during the installation of Windows XP.
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

• Latest version of Firefox has problems loading sites, trying to load Google Analytics. No error message, just a page that won't load. How can I stop this?

  Latest version of Firefox has some sites loading problems, it tries to load and gets then supported loading Google Analytics. No error message, just a page that won't load. How can I get rid of this, it is a "pain in the neck."

  URL of affected sites

  http://

  Which websites do you have this problem?

• My toshiba satellite won't load my new battery, or former

  ORIGINAL TITLE: battery

  My toshiba satellite won't load my new battery, or the old, the icon shows activity concluded for a few seconds then it stops

  Hello

  References to Vista also apply to Windows 7.

  Check with support from the manufacturer of their books online and the drivers and their forums system
  (as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
  problems.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  ================================================================

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  =================================================================

  Other information that might help:

  Control Panel control - plan change Options - power plans - power - advanced settings
  Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
  long to load).

  In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
  systems overload are not a problem.

  Here are some tips to help and troubleshoot battery issues.

  Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
  eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
  them and be careful). Batteries are old, or it could be a problem with the computer.
  Check with the support of the machine system, and many of them have online forums.

  New Lithium-Ion type battery usually last longer if you do not unload their less than 30%
  However on a laptop that not extend their life a lot. Best is to use the a/c adapter
  When this is possible.

  I use the free version of BatteryBar to monitor my battery. Click on the green button on the
  Yellow box on the right side of the page to download the latest stable version.

  BatteryBar - free version available
  http://osirisdevelopment.com/BatteryBar/index.html

  Another good program

  Vista battery saver - free
  http://www.codeplex.com/vistabattery

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  You can also check with the manufacturer of system and forums that many use their own
  proprietary software to monitor the battery and they could be known problems with your battery.

  ============================================================

  Taking care of your laptop battery
  http://Windows.Microsoft.com/en-us/Windows7/taking-care-of-your-laptop-battery

  Battery meter: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/battery-meter-frequently-asked-questions

  Battery saver
  http://Windows.Microsoft.com/en-us/Windows7/conserving-battery-power

  Solutions to common battery problems
  http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-battery-problems

  What is the precise the battery meter?
  http://Windows.Microsoft.com/en-us/Windows7/how-accurate-is-the-battery-meter

  ============================================================

  Try this - to make a Restore Point

  How to create a System Restore Point in Windows 7
  http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  Then Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
  Update the drivers (which can do nothing) - then do a right click and UNINSTALL each - RESTART
  who will update the driver stacks.

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Windows 8 update won't load

  My computer Windows 8 acted as weird after I have updated to 8.1 that according to me. Windows Movie Maker does not recognize the files that it used to recognize. My Google Chrome acted a lot, just like my files. But the worst is that I can not reset my computer to factory settings to solve this problem. When I try to reset it to factory settings, it just says, "no changes."

  It is very frustrating and so now I have to see if my computer update will fix all this. My computer tells me that I am due for an update when I login, but when I go to

  Settings PC > Windows Update

  The Windows Update screen will load, load and load and I'll it let it charge for hours and hours, but it keeps loading. Never, he shows me the update I need. There is also no error code for the update because it won't load at all.

  It's frustrating because I don't understand why I can't reset my computer completely or update. I did the research for hours and hours to solve this problem and I became irratible trying to fix computers.

  I think that all this comes from the update and I can't fix it. I had a lot of people try and fix it, but usually, I'm able to fix computers or searching for the answer to fixing it, but not this time.

  If someone knows the solution to this problem, feel free to respond. I ended up getting tired of all these questions and I don't know what else to do.

  Thank you.

  Hi Kaitlyn,

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  To better understand the issue, I would need more information on your side.

  1. What is the number of brand and model of the computer? (So that I can help you find the device drivers on the site of computer manufacturer)

  2. what measures all troubleshooting have you tried?

  This problem might have occurred because of these reasons:
  1. lack of Windows updates.
  2. If the device drivers are not updated.
  3 corrupt system files.

  Before you start the troubleshooting steps allows you to download and install the latest device drivers for all devices in the computer manufacturer's website. Check if it helps. If the problem persists, try the steps listed here and see if it helps:

  Method 1:
  I suggest you to reset components Windows Update, which fixes corrupted Windows Update components and help you install Windows updates.
  

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the the Microsoft Knowledge Base:

  
  Method 2:
  If the problem persists, I suggest to start the computer in Mode safe mode with network and check if the problem persists or not. If the problem does not occur in Mode safe mode with networking, you can set up your computer in a clean boot and check if it helps.

  
  Step 1:
  Start the computer in safe mode with network. In Safe Mode with networking starts with a minimal set of drivers and files.

  Start settings for Windows (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-including-safe-mode

  If the problem does not occur in safe mode with network, try step 2:

  Step 2:
  Set up your computer in a clean boot state. Setting the system in a clean boot state will help you determine if third-party applications or startup items are causing the problem.

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135

  Note: After the clean boot troubleshooting steps, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  
  

  Method 3:
  If the problem persists, you can run the audit and the auditor of file system (CFS) tool if this solves the problem. SFC scan would be a system file corrupt on the computer search and replace.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• All of a sudden my Elements 7 won't load all the video files not saying not supported

  Suddenly my Elements 7 won't load all the video files saying not supported, I rebooted, uninstalled and reinstalled but it refuses to work any ideas please

  If you are video comes from a Hi8 camcorder, then it is analog, which has been digitized. And how and what facilities allowing you to scan this video may be important. But, since you say that you have changed this video before in Premiere Elements without a problem, I'll assume this isn't the question at the moment - although it could certainly be. Especially since you use a such relatively old version of Premiere Elements, one that requires you to manually configure your project.

  In fact, try to download the trial version of the latest version of Premiere Elements and see if you experience the same problem. The current versions of the program are many more automatically and are capable of managing a much wider range of video file formats. You don't have to buy the program. Just try free trial and see if you still experience the same problems.

  If nothing else, install the trial version 14 version COULD even repair what has been damaged in your codec library, if that's your problem in version 7.

• Open PS, updates files won't load

  Photoshop files won't load and the error message, number 42, indicates that the files appear to be corrupt.

  Error 42 and 48 https://forums.adobe.com/thread/1893316

• Some projects won't load does not, first Elements 4

  At first, my projects worked very well. I was in the middle of working on a particular project before decide me, ' Hey, we're going to upgrade the computer!

  Now, some projects simply won't load. I click on the project, and all I get is a blackened by window with the text "user interface initialization" below left. It never initializes.

  It is when I have the chance. Sometimes, all crashes with just a few "the first meeting with a serious error." It does not freeze, cause the program is able to create a backup before its closure, so I think that there is some kind of conflict. But for the life of me, I can't understand it.

  The only thing that is changed from then to now is I now version 64-bit instead of 32-bit windows. Graphics card is the same, the memory is the same, everything is the same. That's all just a new installation of windows.

  It cannot be just a general incompatibility, because some projects take very well. It's completely random those who, although they tend to be small. (a few small projects is loading)

  I had to reinstall first but who usually solves problems not create.

  Some things I've tried:

  Clear cache

  Removal of the preferences

  Relocation of

  Disable hardware acceleration

  programs to disable my anti virus (AVG and Spybot 2.0)

  Compatibility mode for Windows XP service pack 2 AND 3

  Give administrator privileges

  It is the only open application

  politely asked

  This software has been my companion software edition for years. I need to understand what got so weird since the 64-bit update.

  Specifications of the computer:

  Radeon 6670

  8 GB memory

  Windows 7 64 bit

  Processor Intel i5 3401

  ASUS Micro-ATX Motherboard

  All my drivers are up to date. Quick time is updated. Flash is up to date. The Cree program open when the draft takes over and works like a charm. So, what gives?

  Red truck inc.

  I have the first Elements 4 in Windows 7, 8 and 8.1 64bits. No problems. In the properties/Compatibility tab, I leave "run this program in compatibility mode for" unchecked. I have to right click on the first Elements 4, select run as administrator, even though I have worked for a user with the privileges of the administrator account. Then, focus on the angle of permissions a little more.

  With the thought of the possible remains of incomplete install or reinstall, you did just uninstall, ccleaner Cross (parts regular and register of vacuuming), reinstall?

  Is this video card Radeon 6670 only video card that has the computer? Are you on any network? Do you run a system single or dual monitor on your Windows 7 64 bit?

  Just some thoughts for now.

  Later.

  RTA

• first elements 8 won't load on my windows 8

  first elements 8 won't load on my windows 8

  Try running it in compatibility Win XP mode.

  Mylenium

• Dreamweaver CS4 won't load

  Dreamweaver CS4 won't load - I get an error of execution with the following message.

  The application requested execution in an unusual way.

  I am running Windows 7. This error came out of the blue. Does anyone have any suggestions on how to solve this problem.

  I have clients waiting for an update of the Web site.

  Jim

  Sometimes clear the Cache is not enough.  Try to remove your personal Configuration as described below:

  http://forums.Adobe.com/thread/494811

  Restart your computer.
  

  Nancy O.

• Bridge of Sony for Mac. wanted an update, and phone won't turn on now!

  Hello

  Today, I tried to transfer files from my phone to my Mac. When I plugged my phone the Sony Bridge for Mac asked me if I'd like to update so I clicked Yes and it started to be updated with my phone connected. Then out of it, my phone off and it won't turn on. It will only vibrate and display the Sony logo but won't go any futher. I tried the combination of flight + and start/stop button and many others, but nothing works! I need my phone very quickly at work, and I really don't want to lose all the files!

  Help, please!

  It sounds more like you had an update to the system firmware and you can have disconnected your phone that this process was going on - anything you can do I'm afraid to say is a repair of the system, but this will erase all data on your phone

• Mac FIrefox 20.0 some Web sites won't load not

  I am running 20.0 Firefox on my Mac. My operating system is OS X 10.8.3. Some sites Web does very well. Some are starting to load up, but never end. The color wheel spins and I have to force quit. AMERICAblog is an example of a site that does not load correctly, but there are many others. It seems that large commercial sites - like Facebook - work correctly. I worked through all the corrections that I could follow, and they do not seem to work. Everyone knows about this problem? Anyone know what to do? Thank you.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• Very confused! Mac OS El Capitan and Cisco WLC5508/Aironet3702i some sites won't load is not on wifi

  All,

  A strange behavior.

  Worked for the last great 9 months, but here is the story.

  Environment:

  ASA5516-X, ASA5505, ASA5510

  * A tried all three, thinking that it was a firewall issue.

  WLC5508 and AP3702i 17

  Catalyst2960 switches

  Recently, my Mac cannot access some sites like aol.com, cisco.com, apple.com and paychex.com of a wired connection (adapter Thunderbolt) my catalyst switch. Wifi, cannot access some sites like google and yahoo and not those listed above. Portable windows can access all the websites all the time over wireless connections or wired my computers?

  We have 5 macs in the building and they all have the same problem. Him are wired for now, but I'd like to be able to solve this problem.

  Also I used to be able to telnet to my switch and firewall on wifi it will connect, but no data appears to indicate that I am in the prompt of cisco device.

  Any ideas on what could happen?

  I even restored my original config back to the first date that everything was fine.

  Thank you

  Nate

  Hello

  I have a problem quite identical to this step-by-step helped: (for some users it did not work)

  http://techrumours.weebly.com/tech-solutions/some-website-not-loading-up...

  When you're connected via wifi, rather than access Web sites via safari or chrome, have you tried their ping via terminal to check the dns configuration.

  If the ping of through terminal host name does not work then resolve ip on a windows and try to ping ip to ensure that Internet accessibility.

  Mac and windows are connecting even though she ssid and get the same authorization?

  Thank you

  PS: Please do not forget to rate and score as good response if this solves your problem