Bridged networking: host and invited him IPs?

Similar Questions

• HP LaserJet 4000 connected over an XP Pc to a network host and a machine of windows 7.

  I have an HP LaserJet 4000, which works well on my windows XP computer. I just bought a new windows 7, 64-bit PC and can not get the new PC for commiunicate with the HP printer. Is there a way to channel this default printer through the old Xp machine which will always be in the home network, but in another place?

  You should be able to get your LaserJet 4000 to work with your Windows 7 computer, but you may need to go to the HP site and download/install the LJ 4000 for Windows 7-64 bit driver.  The link to it should be as follows:

  <>http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=14952&TaskID=135&prodTypeId=18972&prodSeriesId=25474&lang=en&cc=us >

  HTH,
  JW

• Cann't open web access, ssh connection between host and bridged the VM in network mode

  I have a VMware workstartion 7.0 is installed on a machine XP 64 (192.168.2.44). I have the following virtual machines.

  1 ESX 4.0 (192.168.2.42)

  2 ESX 3.5 (192.168.2.38)

  3. windows server 2003 with vCenter installed. (192.168.2.100)

  4. Windows server 2003 with the roles of DNS and DC. (192.168.2.101)

  I am trying to connect to vCenter or ESX VM of the XP hosting web interface. However I can't get through. but I can ping and I can also telnet to ports 443, 80. Even I can't ssh connection. When I use putty, it is actually connected but no response from the ssh server. Looks like the network connection is there, somehow the server process responds simply not properly once the connection is established.

  BTW, all of them use bridged network, they all 192.168.2.x IPs. I can connect to vCenter, ESX web interface from another computer without problem.

  Just wonder if anyone else has experienced this before. I have tried to search the forum, did not find a similar question.

  Thank you!

  Tong

  Your host, try to disable (temporarily) a "discharge" for the NIC settings.

  http://KB.VMware.com/kb/1015940

  If this solves the problem, other threads on this issue have mentioned that a fix for this will be included in the next version of the 'point' of Workstation 7 (as 7.1, etc).

• Networking and VPN bridge on host

  I have a host computer running Windows 7 I have VPN business to do my job on a daily basis.  I also have a couple of XP VM I use bridged networking.  These reviews of VM, I NEVER want the data to be seen on my VPN network.  It seems with the bridge it actually creates a separate physical network (even if the host and guest travel performed the same wire) as evidenced by the tracert on the prompt just goes right on the Internet, while the army carries all through the VPN.

  Am I correct here?

  Welcome to the forums!

  Yes, you are right. Networking bridged lie your NETWORK eCard to the one physical Ethernet card while the client retains its own identity of network. It is not the VPN.

  If you want to bind the guest to the VPN you use NAT, as this bind to each pile TCP/IP, including VPN one. This makes it possible to use every network card, as long as he speaks TCP/IP.

  AWo

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• host and network bridge

  Is someone can you please tell me what is the right way to create a virtual machine with the host only networking and a static IP address?

  What should be the range of IP addresses for the host only one virtual computer?

  Thank you.

  fernandoch wrote:

  OK well with that. But how do I access the virtual machine with an IP 192.168.1.101 host if it uses a briged network and I can not access the same virtual machine (with IP address

  192.168.1.101) so it uses only network host?

  The subnet of the host is only 192.168.50.0

  Because it seems that you use wrong IP address in your comments.

  Each IP network needs its own subnet address. This means that the physical and virtual network who need different IP subnet addresses. This is the case with your installation and that's right.

  If you move the mode prompt "bridged" with IP subnet address 192.168.1.0/24 to 192.168.50.0/24 the guest needs an IP address in this range. Either set it to DHCP and if you have not changed the default settings in VMware it will receive a correct IP address automatically configuration or set the IP address manually, for example 192.168.50.10 (and if this address is still available). Furthermore, if you set the DHCP client and if you have a DHCP server on the local network physical prompt always gets the right to installation when you mofve it from one network to the other.

  If you found this information useful, please consider awarding points to 'Correct' or 'Useful' responses Thank you!!

  AWo

  VCP / vEXPERT 2009

• VMware in network bridge: Freezed host with WS6.5 and Windows Vista x 64 or Windows 7 x 64 host operating system

  Hello

  I have a problem with VMware Workstation 6.5 on 64-bit Windows host.

  First, I installed VMware Workstation 6.5.0 118166 on my x 64 Windows Vista SP1 host, and I had a weird problem when working with network on my host system, no matter there is a guest running or not. The problem is when I try to connect/disconnect from VPN connections or plug/unplug my network from my LAN socket cable, etc., host OS freezes suddenly with no answer to anything whatsoever, no movement of the mouse, without strikes, nothing.

  After sometimes, I installed Windows 7 Beta 7000 x 64 on my computer and have no problem with it until I installed VMware Workstation 6.5.0 118166 on it: the gel problem once again. I thought it may be a problem on this specific build of VMware, so I downloaded and installed the latest version (6.5.1 126130) on my system, but the problem persists.

  After playing with a large number of settings, I find that if I delete the service "VMware Bridge Protocol" of my network card, the problem does not happen.

  I searched the forum but I can't find anything like that, so I wonder if anyone can help me with that?

  My network card is an edge ' Realtek RTL8168B/8111 Family PCI - E Gigabit Ethernet NIC (NDIS 6.0) b ' on my card mother Gigabyte GA-MA770-DS3.

  Other features of the system:

  AMD Athlon 64 X 2 5200 + CPU

  6.0 GB of RAM

  Seagate ST3500320AS SATA HARD drive

  nVidia GeForce 8600GT 512 MB video card

  Thank you.

  Shadmehr wrote:

  My network card is an edge ' Realtek RTL8168B/8111 Family PCI - E Gigabit Ethernet NIC (NDIS 6.0) b ' on my card mother Gigabyte GA-MA770-DS3.

  Which driver version you have installed for your network (NIC) card?   This link shows a version of driver Vista/Win2008 6.216 (dated 2009/02/26) available.  The same driver should work as well for Win7.

  If the above does not resolve the problem, view the properties for the NETWORK adapter and temporarily disable all 'Task Offload"or other characteristics"discharge"to see if that helps.

• Is it posible to allow access between the host and virtal machine without wired network?

  I want to use my laptop to show him that I did in the virtual work to other people at my home.

  However, the laptop is ofen not allowed access to the network in their office.

  Is it posible to allow access between the host and virtal machine without wired network?

  VMware player

  My virtual machine is filled to the physical network adapter and use the static IP address.

  Brad

  Setting of the virtual machine: filled

  Change that to each host only (what Continuum called VMnet1) or NAT (VMnet8).  Both use a separate virtual NETWORK card to connect the physical computer virtual host, independent of any NETWORK adapter on the host.

  ... Since the machine host (win7) could not get IP, ping fail to VM (192.168.1.5)...

  Because the connection between the guest and the host is through a separate NETWORK card, you must use the 'other' IP address.  Access a prompt on the host computer and type IPCONFIG to view the IP address of VMnet1 and VMnet8 NIC.  Then use this IP address instead of 192.168.1.5.

  And when you have changed the network management modes (i.e. of bridged to host-only), Windows does not automatically renew its IP address.  The virtual NETWORK card uses a different subnet if you need to renew your DHCP lease or change your static IP address to work with the new subnet.

• cannot change the network not jumpered it is no host not bridged network adapters

  Hey guys, wondering that if you can help me with this, I've upgraded to windows 10 and have this annoying issue in vmware workstation 11

  I want to VMnet2 only use my MIFI wifi and not my regular internet so I went to the virtual network editor like I did before and added vmnet2 but when I check the box for height to select the wifi it says "can't change network to not bridged there is no host not bridged network adapters" which has left me speechless >. <

  Just a guess. Check vmnet0 (default bridged network) to see if it uses a dedicated, network adapter or is it still set to automatic.

  André

• Workstation 9 - slow network performance between the host and guest

  I am running windows 8 on the host and installed by 9 trial. Then installed windows 8.1 as a comment system.

  I'm a slow, very slow network between the two.

  If I send files to and from the computer with another guest, transfers are normal, but if I try the same files between the host and the guest, they are really slow.

  I use a bridge connection.

  I read elseware to disable the following on the guest card:

  Large Send Offload v2 (IPv4)

  Large Send Offload v2 (IPv6)

  But that did not help.

  Thoughts?

  Maybe then try Hyper-v, it help you better.

  report this incident to Vmware if you can

  Concerning

• How can I set up 2 physical network cards, 1 for the host and 1 for vm?

  Hello

  With the help of VMWare WS 7.1.  I have a physical machine with 2 network as the host cards. Currently only one of the cards network is connected to the network.

  It hosts a SBS 2008 Server virtualized (while we prepare permanent news of the home server). I know not to leave the virtual machine SBS see doamin on the network controllers.

  I want to give a static IP address on one of the network adapters on the virtual machine and allow the host have the map of others.

  Can someone give me the steps or point me to the instuctions?

  Or is it better to use a NETWORK card?  The virtual machine is currently using a NIC a nic virtualized in bridged mode.

  Thank you!

  1. disable automatic bypass on VMnet0 in network virtual and configured Editor to use the map NETWORK active on the host.

  2. in the Virtual Machine settings > set it to network adapter connected by a bridge.

  3. in the guest operating system, configure the IP address as you would on a physical computer.  Take a look at: Managing Your Windows Small Business Server 2008 Network

  It's as simple as that.

• Configure the host and the VM on two separate wireless networks

  Hello community, I was a browser for a long time, but this will be my first post.

  I would like to begin by saying that I have always found the answer I was looking for by browsing these forums and that I browsed discussions thereon and consulted the chapters regarding virtual networks in the manual workstation 7.1, but at this stage were still unable to solve my problem.

  The scenario:

  I'm a small business working in a House (upstairs) / hookah lounge (bottom). We recently had a second internet connection (WORK), Internet home of my family (HOME), to provide our customers with a free wi - fi. I would use the connection of WORK (during our hours of downtime) in a Ubuntu VM for folding and seeding of torrents. I want to put this far on a network traffic will not affect the other.

  The network:

  SE host: Windows 7 Pro 64-bit

  (Host) NIC: Intel PRO/Wireless 3945ABG (Mini PCI)

  VM: Ubuntu 10.04 on VMWare Workstation 7.0.0 build-203739

  NIC (VM): Alfa awus036h (USB)

  
  

  The current configuration:

  Network connection is made, the State of replication physical physical network is unchecked.

  The Alfa is connected to the virtual machine and is no longer present on the list of the network adapters in Windows.

  It seems that I have to manually disable the "auto eth 1" interface or the virtual machine using the internet connection in host rather than the network of your choice that the Alfa connects to in VMWorkstation. The speed of the internet with eth auto 1 is connected is quick and consistent, but using it defeats the purpose. Strangely, when I go to network connections, under the "last use" for "eth 1 auto ' it is said 'never '.

  When "eth 1 car" is disconnected, it seems that the virtual machine uses the network wireless connected to the Alfa. But the internet speed is very slow and inconsistent. On downloads, the speed varies considerably; Also, it remains at 0 kb/s for a while before going to 80 KB/s, then works his way down to 0 kb/s again.

  Possible solutions:

  1. it's a driver problem for the Alfa inside the VM environment all this time?

  2 just misunderstood how to set up this kind of virtual network?

  3 is it possible to get the desired configuration by filling the WORK and VMnet0/1/8?

  * Note: Only VMnet1 and VMnet8 appear on the Windows network connections, however isn't VMnet0 bridged one responsible for networking?

  4. upgrade to the current version of the desktop would be useful?

  5. do this problem originally because of some settings on the router?

  * Note: The AP is close enough to provide a signal strength of 85-90%

  Sorry to be so talkative, I just wanted to be as clear as possible because I'm still a beginner to learn more about virtualization.

  Thank you in advance, as always, your help is greatly appreciated.

  First of all, I must say that when I did this last response, I've been on my Mac and I thought the configuration of a host of Windows XP however outside the nomenclature of the names of the host network settings dialog box the rest stands as it is on a host Windows 7 as described below, including a picture as an attachment.

  On a Windows 7 x 64 host with two network adapters, each on a different subnet and VMware Workstation 7.1.3 installed with the editor of virtual computer network configured for VMnet0 and VMnet2 jumpered separately to one of the host of NIC and I have not changed the settings for Windows 7 host NIC-1 and have network/Internet connectivity to the host of this NETWORK adapter as shown in the picture of Google in Internet Explorer on the host computer.  In VMware Workstation 7.1.3 I have a Linux Guest configured to use VMnet2, which is filled in the settings and the Windows 7 host NIC-2 have all with the exception of VMware Bridge Protocol unchecked and have network/Internet connectivity in the guest as indicated by Google in a browser.

  From the perspective of connectivity network between the host and the guest by NIC - 2 on the host computer when all with the exception of VMware Bridge Protocol unchecked there is no connectivity between the two on this subnet because there are no protocol at stake to allow the conversation to take place.

  So theoretically and in practice what I said previously, but didn't were not expressly with a Windows 7 host in mind, nevertheless what I said is true and accurate, as evidenced by world real test/use by what I said and with the image attached herein.

  FWIW Windows 7 has been configured with the default settings and the only changes to the host's network were those made during the installation of VMware Workstation 7.1.3 so with the configuration I discussed with the attached picture, there is no reason why the host and the guest cannot be on different physical networks and each network/Internet connectivity based on the information I have provided and they be isolated from each other by being on separate physical networks.

  That said, even if they can be isolated by being on separate physical networks can still can connectivity between the 2 through VMware shared folders it it turned on and of course & slide and other services so if absolute isolation is necessary to the point where it can be, and the guest still operating system run on a Virtual Machine in the host you would need to disable the Backdoor for VMware Tools cannot provide shared folders on VMware, & glide and other services.  So if you need this isolation level let me know and I will provide additional information to complete it.

• Bridged Networking - Comments don't see host; See everything

  I'm under Ubunty 10.04 as a guest on desktop Windows 7 x 64 using VMWare Workstation 7.1.

  My network is configured as Bridged (VMNet0), and I have disabled VMNet1 and VMNet8 devices just to make sure that they don't accidentally interfere.

  The host can ping the guest by IP and get exposed by the guest ports. It is ok. The host can also get to other hosts, local and internet addresses.

  The customer can get to other hosts, local and internet addresses. However, he cannot get host (by IP or name, although only of intellectual property issues).

  Address 192.168.1.103, the host is assigned by the DHCP server on the local network. the 192.168.1.109 prompt.

  Here are the details of host networking:

  The host has a few network cards installed:

  -Wireless generally (in use and use in this case)

  -Wired (sometimes in use, don't use it in this case)

  -VPN (not using it right now)

  -WLAN (not using it right now)

  In addition, the Windows Teredo tunneling ipv6 stuff and whatnot. Seems you can't throw a rock here without hitting another virtual network card these days :-/

  Microsoft Windows [http://Version 6.1.7600|http://Version 6.1.7600]
  Copyright (c) 2009 Microsoft Corporation.  All rights reserved.
  
  C:\Users\jwatte>ipconfig /all
  
  Windows IP Configuration
  
     Host Name . . . . . . . . . . . . : jwatte-laptop
     Primary Dns Suffix  . . . . . . . : corp.imvu.com
     Node Type . . . . . . . . . . . . : Hybrid
     IP Routing Enabled. . . . . . . . : No
     WINS Proxy Enabled. . . . . . . . : No
     DNS Suffix Search List. . . . . . : corp.imvu.com
                                         mindcontrol.org
                                         hsd1.ca.comcast.net.
  
  Ethernet adapter Local Area Connection 2:
  
     Media State . . . . . . . . . . . : Media disconnected
     Connection-specific DNS Suffix  . : corp.imvu.com
     Description . . . . . . . . . . . : TAP-Win32 Adapter V9
     Physical Address. . . . . . . . . : 00-FF-3F-AD-F6-0B
     DHCP Enabled. . . . . . . . . . . : Yes
     Autoconfiguration Enabled . . . . : Yes
  
  Wireless LAN adapter Wireless Network Connection 4:
  
     Media State . . . . . . . . . . . : Media disconnected
     Connection-specific DNS Suffix  . :
     Description . . . . . . . . . . . : Microsoft Virtual WiFi Miniport Adapter #3
     Physical Address. . . . . . . . . : 90-4C-E5-3F-0A-E7
     DHCP Enabled. . . . . . . . . . . : Yes
     Autoconfiguration Enabled . . . . : Yes
  
  Wireless LAN adapter Wireless Network Connection:
  
     Connection-specific DNS Suffix  . : mindcontrol.org
     Description . . . . . . . . . . . : Dell Wireless 1510 Wireless-N WLAN Mini-Card
     Physical Address. . . . . . . . . : 90-4C-E5-3F-0A-E7
     DHCP Enabled. . . . . . . . . . . : Yes
     Autoconfiguration Enabled . . . . : Yes
     Link-local IPv6 Address . . . . . : fe80::b1dd:7b72:97f0:c37d%18(Preferred)
     IPv4 Address. . . . . . . . . . . : 192.168.1.103(Preferred)
     Subnet Mask . . . . . . . . . . . : 255.255.255.0
     Lease Obtained. . . . . . . . . . : Saturday, June 05, 2010 12:16:37 PM
     Lease Expires . . . . . . . . . . : Monday, June 07, 2010 9:03:17 PM
     Default Gateway . . . . . . . . . : 192.168.1.1
     DHCP Server . . . . . . . . . . . : 192.168.1.1
     DHCPv6 IAID . . . . . . . . . . . : 546327781
     DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-8E-7E-B0-00-26-B9-0A-FE-91
     DNS Servers . . . . . . . . . . . : 68.87.76.182
                                         68.87.78.134
     NetBIOS over Tcpip. . . . . . . . : Enabled
  
  Ethernet adapter Local Area Connection:
  
     Media State . . . . . . . . . . . : Media disconnected
     Connection-specific DNS Suffix  . : hsd1.ca.comcast.net.
     Description . . . . . . . . . . . : NVIDIA nForce 10/100/1000 Mbps Ethernet
     Physical Address. . . . . . . . . : 00-26-B9-10-E7-EE
     DHCP Enabled. . . . . . . . . . . : Yes
     Autoconfiguration Enabled . . . . : Yes
     Link-local IPv6 Address . . . . . : fe80::6006:aa6d:298c:33e1%11(Deprecated)
     IPv4 Address. . . . . . . . . . . : 10.0.0.15(Deprecated)
     Subnet Mask . . . . . . . . . . . : 255.255.255.0
     Lease Obtained. . . . . . . . . . : Sunday, June 06, 2010 12:25:39 PM
     Lease Expires . . . . . . . . . . : Sunday, June 06, 2010 11:10:00 PM
     Default Gateway . . . . . . . . . : 10.0.0.1
     DNS Servers . . . . . . . . . . . : 68.87.76.182
                                         68.87.78.134
     NetBIOS over Tcpip. . . . . . . . : Enabled
  
  Tunnel adapter isatap.mindcontrol.org:
  
     Media State . . . . . . . . . . . : Media disconnected
     Connection-specific DNS Suffix  . : mindcontrol.org
     Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
     Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
     DHCP Enabled. . . . . . . . . . . : No
     Autoconfiguration Enabled . . . . : Yes
  
  Tunnel adapter isatap.hsd1.ca.comcast.net.:
  
     Media State . . . . . . . . . . . : Media disconnected
     Connection-specific DNS Suffix  . :
     Description . . . . . . . . . . . : Microsoft ISATAP Adapter #3
     Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
     DHCP Enabled. . . . . . . . . . . : No
     Autoconfiguration Enabled . . . . : Yes
  
  Tunnel adapter Teredo Tunneling Pseudo-Interface:
  
     Connection-specific DNS Suffix  . :
     Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
     Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
     DHCP Enabled. . . . . . . . . . . : No
     Autoconfiguration Enabled . . . . : Yes
     IPv6 Address. . . . . . . . . . . : 2001:0:4137:9e74:14ed:28e3:3f57:fe98(Preferred)
     Link-local IPv6 Address . . . . . : fe80::14ed:28e3:3f57:fe98%14(Preferred)
     Default Gateway . . . . . . . . . : ::
     NetBIOS over Tcpip. . . . . . . . : Disabled
  
  Tunnel adapter isatap.corp.imvu.com:
  
     Media State . . . . . . . . . . . : Media disconnected
     Connection-specific DNS Suffix  . :
     Description . . . . . . . . . . . : Microsoft ISATAP Adapter #4
     Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
     DHCP Enabled. . . . . . . . . . . : No
     Autoconfiguration Enabled . . . . : Yes
  
  Tunnel adapter isatap.{9DF003A3-9F9D-4CB0-B645-590EF2A4BB06}:
  
     Media State . . . . . . . . . . . : Media disconnected
     Connection-specific DNS Suffix  . :
     Description . . . . . . . . . . . : Microsoft ISATAP Adapter #5
     Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
     DHCP Enabled. . . . . . . . . . . : No
     Autoconfiguration Enabled . . . . : Yes
  
  C:\Users\jwatte>route print
  ===========================================================================
  Interface List
   20...00 ff 3f ad f6 0b ......TAP-Win32 Adapter V9
   19...90 4c e5 3f 0a e7 ......Microsoft Virtual WiFi Miniport Adapter #3
   18...90 4c e5 3f 0a e7 ......Dell Wireless 1510 Wireless-N WLAN Mini-Card
   11...00 26 b9 10 e7 ee ......NVIDIA nForce 10/100/1000 Mbps Ethernet
    1...........................Software Loopback Interface 1
   22...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2
   24...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #3
   14...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface
   29...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #4
   30...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #5
  ===========================================================================
  
  IPv4 Route Table
  ===========================================================================
  Active Routes:
  Network Destination        Netmask          Gateway       Interface  Metric
            0.0.0.0          0.0.0.0      192.168.1.1    192.168.1.103     25
          127.0.0.0        255.0.0.0         On-link         127.0.0.1    306
          127.0.0.1  255.255.255.255         On-link         127.0.0.1    306
    127.255.255.255  255.255.255.255         On-link         127.0.0.1    306
        192.168.1.0    255.255.255.0         On-link     192.168.1.103    281
      192.168.1.103  255.255.255.255         On-link     192.168.1.103    281
      192.168.1.255  255.255.255.255         On-link     192.168.1.103    281
          224.0.0.0        240.0.0.0         On-link         127.0.0.1    306
          224.0.0.0        240.0.0.0         On-link     192.168.1.103    281
    255.255.255.255  255.255.255.255         On-link         127.0.0.1    306
    255.255.255.255  255.255.255.255         On-link     192.168.1.103    281
  ===========================================================================
  Persistent Routes:
    None
  
  IPv6 Route Table
  ===========================================================================
  Active Routes:
   If Metric Network Destination      Gateway
   14     58 ::/0                     On-link
    1    306 ::1/128                  On-link
   14     58 2001::/32                On-link
   14    306 2001:0:4137:9e74:14ed:28e3:3f57:fe98/128
                                      On-link
   18    281 fe80::/64                On-link
   14    306 fe80::/64                On-link
   14    306 fe80::14ed:28e3:3f57:fe98/128
                                      On-link
   18    281 fe80::b1dd:7b72:97f0:c37d/128
                                      On-link
    1    306 ff00::/8                 On-link
   14    306 ff00::/8                 On-link
   18    281 ff00::/8                 On-link
  ===========================================================================
  Persistent Routes:
    None
  
  C:\Users\jwatte>ping 192.168.1.109
  
  Pinging 192.168.1.109 with 32 bytes of data:
  Reply from 192.168.1.109: bytes=32 time<1ms TTL=64
  Reply from 192.168.1.109: bytes=32 time<1ms TTL=64
  Reply from 192.168.1.109: bytes=32 time<1ms TTL=64
  
  Ping statistics for 192.168.1.109:
      Packets: Sent = 3, Received = 3, Lost = 0 (0% loss),
  Approximate round trip times in milli-seconds:
      Minimum = 0ms, Maximum = 0ms, Average = 0ms
  Control-C
  ^C
  C:\Users\jwatte>
  

  And here are the details comments:

  jwatte@jwatte-hello-ubuntu:~$ sudo ifconfig -a
  [sudo] password for jwatte: 
  eth0      Link encap:Ethernet  HWaddr 00:0c:29:07:49:96  
            inet addr:192.168.1.109  Bcast:192.168.1.255  Mask:255.255.255.0
            inet6 addr: fe80::20c:29ff:fe07:4996/64 Scope:Link
            UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
            RX packets:348 errors:0 dropped:0 overruns:0 frame:0
            TX packets:177 errors:0 dropped:0 overruns:0 carrier:0
            collisions:0 txqueuelen:1000 
            RX bytes:48968 (48.9 KB)  TX bytes:22201 (22.2 KB)
            Interrupt:19 Base address:0x2024 
  
  lo        Link encap:Local Loopback  
            inet addr:127.0.0.1  Mask:255.0.0.0
            inet6 addr: ::1/128 Scope:Host
            UP LOOPBACK RUNNING  MTU:16436  Metric:1
            RX packets:86 errors:0 dropped:0 overruns:0 frame:0
            TX packets:86 errors:0 dropped:0 overruns:0 carrier:0
            collisions:0 txqueuelen:0 
            RX bytes:5967 (5.9 KB)  TX bytes:5967 (5.9 KB)
  
  jwatte@jwatte-hello-ubuntu:~$ sudo route -n
  Kernel IP routing table
  Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
  192.168.1.0     0.0.0.0         255.255.255.0   U     1      0        0 eth0
  169.254.0.0     0.0.0.0         255.255.0.0     U     1000   0        0 eth0
  0.0.0.0         192.168.1.1     0.0.0.0         UG    0      0        0 eth0
  jwatte@jwatte-hello-ubuntu:~$ ping 192.168.1.103
  PING 192.168.1.103 (192.168.1.103) 56(84) bytes of data.
  ^C
  --- 192.168.1.103 ping statistics ---
  2 packets transmitted, 0 received, 100% packet loss, time 1009ms
  
  jwatte@jwatte-hello-ubuntu:~$ lsmod
  Module                  Size  Used by
  iptable_filter          2271  0 
  ip_tables               9991  1 iptable_filter
  x_tables               14299  1 ip_tables
  binfmt_misc             6587  1 
  vmblock                10766  1 
  vsock                  37070  0 
  vmmemctl                7296  0 
  vmhgfs                 48933  1 
  acpiphp                18284  0 
  snd_ens1371            18814  2 
  gameport                9089  1 snd_ens1371
  snd_ac97_codec        100646  1 snd_ens1371
  ac97_bus                1002  1 snd_ac97_codec
  snd_pcm_oss            35308  0 
  snd_mixer_oss          13746  1 snd_pcm_oss
  snd_pcm                70662  3 snd_ens1371,snd_ac97_codec,snd_pcm_oss
  snd_seq_dummy           1338  0 
  snd_seq_oss            26726  0 
  snd_seq_midi            4557  0 
  snd_rawmidi            19056  2 snd_ens1371,snd_seq_midi
  ppdev                   5259  0 
  snd_seq_midi_event      6003  2 snd_seq_oss,snd_seq_midi
  fbcon                  35102  71 
  tileblit                2031  1 fbcon
  font                    7557  1 fbcon
  bitblit                 4707  1 fbcon
  softcursor              1189  1 bitblit
  psmouse                63245  0 
  serio_raw               3978  0 
  parport_pc             25962  1 
  snd_seq                47263  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
  snd_timer              19098  2 snd_pcm,snd_seq
  snd_seq_device          5700  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
  snd                    54148  14 snd_ens1371,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
  soundcore               6620  1 snd
  snd_page_alloc          7076  1 snd_pcm
  vga16fb                11385  1 
  vmci                   26826  1 vsock
  intel_agp              24177  1 
  agpgart                31724  1 intel_agp
  i2c_piix4               8335  0 
  shpchp                 28820  0 
  vgastate                8961  1 vga16fb
  lp                      7028  0 
  parport                32635  3 ppdev,parport_pc,lp
  mptspi                 14652  2 
  mptscsih               31325  1 mptspi
  mptbase                83022  2 mptspi,mptscsih
  scsi_transport_spi     21096  1 mptspi
  floppy                 53016  0 
  vmxnet                 15418  0 
  jwatte@jwatte-hello-ubuntu:~$ lspci
  00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 01)
  00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 01)
  00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 08)
  00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
  00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 08)
  00:07.7 System peripheral: VMware Virtual Machine Communication Interface (rev 10)
  00:0f.0 VGA compatible controller: VMware SVGA II Adapter
  00:10.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 01)
  00:11.0 PCI bridge: VMware PCI bridge (rev 02)
  00:15.0 PCI bridge: VMware PCI Express Root Port (rev 01)
  00:15.1 PCI bridge: VMware PCI Express Root Port (rev 01)
  00:15.2 PCI bridge: VMware PCI Express Root Port (rev 01)
  00:15.3 PCI bridge: VMware PCI Express Root Port (rev 01)
  00:15.4 PCI bridge: VMware PCI Express Root Port (rev 01)
  00:15.5 PCI bridge: VMware PCI Express Root Port (rev 01)
  00:15.6 PCI bridge: VMware PCI Express Root Port (rev 01)
  00:15.7 PCI bridge: VMware PCI Express Root Port (rev 01)
  00:16.0 PCI bridge: VMware PCI Express Root Port (rev 01)
  00:16.1 PCI bridge: VMware PCI Express Root Port (rev 01)
  00:16.2 PCI bridge: VMware PCI Express Root Port (rev 01)
  00:16.3 PCI bridge: VMware PCI Express Root Port (rev 01)
  00:16.4 PCI bridge: VMware PCI Express Root Port (rev 01)
  00:16.5 PCI bridge: VMware PCI Express Root Port (rev 01)
  00:16.6 PCI bridge: VMware PCI Express Root Port (rev 01)
  00:16.7 PCI bridge: VMware PCI Express Root Port (rev 01)
  00:17.0 PCI bridge: VMware PCI Express Root Port (rev 01)
  00:17.1 PCI bridge: VMware PCI Express Root Port (rev 01)
  00:17.2 PCI bridge: VMware PCI Express Root Port (rev 01)
  00:17.3 PCI bridge: VMware PCI Express Root Port (rev 01)
  00:17.4 PCI bridge: VMware PCI Express Root Port (rev 01)
  00:17.5 PCI bridge: VMware PCI Express Root Port (rev 01)
  00:17.6 PCI bridge: VMware PCI Express Root Port (rev 01)
  00:17.7 PCI bridge: VMware PCI Express Root Port (rev 01)
  00:18.0 PCI bridge: VMware PCI Express Root Port (rev 01)
  00:18.1 PCI bridge: VMware PCI Express Root Port (rev 01)
  00:18.2 PCI bridge: VMware PCI Express Root Port (rev 01)
  00:18.3 PCI bridge: VMware PCI Express Root Port (rev 01)
  00:18.4 PCI bridge: VMware PCI Express Root Port (rev 01)
  00:18.5 PCI bridge: VMware PCI Express Root Port (rev 01)
  00:18.6 PCI bridge: VMware PCI Express Root Port (rev 01)
  00:18.7 PCI bridge: VMware PCI Express Root Port (rev 01)
  02:00.0 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB
  02:01.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] (rev 10)
  02:02.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 02)
  02:03.0 USB Controller: VMware USB2 EHCI Controller
  jwatte@jwatte-hello-ubuntu:~$ 
  

  I installed the VMWare Additions on the guest.

  I need for the guest to see the host (and, more specifically, the services on ports exposed on the host), the host, see comments. How to make that happen?

  You can use "bridged", no need to use custom. It is a good practice to change the automatic bypass for VMnet0 at a fixed adapter as you.

  Change it to bridged, now and the status report.

  AWo

  VCP 3 & 4

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• Debian 5.0 host and Client, network problems

  I have a system Debian 5 (Lenny) as a host for VMware Server 2.0.1 with a configuration ethernet servile (bond0 with Robin balancing).

  This host is the ping requests etc. without problem by any computer in the network and vice versa. This host gets its IP address of a DHCP server and appears very well.

  On this host, I run a virtual client, also Debian 5 (Lenny), with an ethernet in Bridge mode connection.

  This host gets its IP from DHCP Windows without problem and is also listed correct

  The host can ping the client without problems. The client cannot ping the host: ping packets 1 in 10 get through.

  Same story for ping any other computer on the network and vice versa (ping the virtual client from any computer).

  A very small amount of packets through. Can someone help me?

  I'll give you the basic information (see images) for host and virtual client.

  Threesa wrote:

  I changed to mode 5 (transmission of balance) and rebooted, but no progress so far: s

  It was a general indication. If you use a NIC team, no matter whether you use VMware, you use BLT if your switches do not support a protocol group.

  The manual on page 238 describes only for Windows is told by the way.

  .. .and some general tips like this: VMware has not tested and does not support the network adapter teams with

  VMware Server on Linux hosts. »

  Would it because I listed the OS as Debian 4 like Debian 5 was not available in the drop-down list?

  It is a line that wraps a LOT in the newspaper for vmware: cannot find Debian conversion type: vim.vm.GuestOsDescriptor.GuestOsIdentifier

  I do not think because if the problem is related to the link it is not related to the prompt (you can install a Windows client for example who is facing the same problems then).

  I thought back to a NETWORK card to check that your installation works in general. If this is the case, we can try to get the liaison work.

  If you found this information useful, please consider awarding points to 'Correct' or 'Useful' responses Thank you!!

  AWo

  VCP / vEXPERT 2009

  Published by AWo

• Host and guest of the machines on different physical networks

  Hello everyone.  I would wise advice from the forum, about a particular environment, I am trying to set up.

  I have VMware Server 2 installed on my XP laptop, which is connected to a DSL modem via a NIC edge portable said has also a PCMCIA NETWORK card installed in it.

  I would like to take a virtual XP workstation and connect to a modem cable via the PCMCIA NIC for test connection hosts and guests safe through the public internet.  For this exercise, I need two machines to be completely separate and therefore have no way to reach or in interaction with each other anyway, except through the extended link.

  What follows is a list of what I've done so far.  I would like to know if there is anything I missed.  Perhaps more measures must be taken that I'm not aware of.

  Thanks in advance for your collective time.

  (1) disabled all services associated with the PCMCIA NIC on the host computer, including TCP/IP, except the VMware Bridge Protocol.

  2) welded by the mentioned back PCMCIA NIC to VMnet2 via VMware Virtual Network Editor.

  (3) excluded the NETWORK PCMCIA card automatic connection via the virtual network Editor.

  (4) set up the virtual ethernet device of the instance XP comments use the custom VMnet2 network.

  (5) set the property 'NetworkAddress' of the network connection in the case of XP from comments to the MAC address of the PCMCIA NIC by step seven of the next mission - http://communities.vmware.com/message/378576;jsessionid=034FC6E865C0DB28AD269D7445F2AD0D

  PS - How could these measures differ for a guest computer to Linux (openSUSE 11), especially step 5 in my list above?

  Welcome to the forums!

  IMHO, I think you have done all that was required. I don't know why your step 5 is necessary or if it will be same cause problem. "Bridged" means that the customer acts as its own instance on the network, which includes a discreet addresses MAC and IP, from my point of view. Affecting the MAC guest host MAC is not necessary for the connection of standard bridge, so why if it is necessary here? In addition, you can set any MAC address that you like for a VMware guest. There are restrictions, once again setting the host MAC address in the guest can cause problems.

  You can find the VMware documentation on how to do it here: Page 240, http://www.vmware.com/pdf/vmserver2.pdf

  There is also something on definition of MAC addresses: Page 234

  If you found this information useful, please consider awarding points to 'Correct' or 'Useful' responses Thank you!!

  AWo

  VCP/vExpert 2009

  Published by AWo

• No Edge 15 Broadcom 802.11ac none hosted network management and stability problems

  I have a new edge 15 that came with Windows 10 64-bit pre-installed. I want to be able to run the soft AP WiFi so I can connect to my wifi adapter.

  The WiFi card is a Broadcom 802.11ac and according to other computers using Dell with the same chip, but the Dell Windows 7 driver supports hosted network supports. But on my computer with the latest driver 7.35.267.0 dated 05/14/15, supported network hosted shows no., which means that the pilot and the chip does not support.

  It seems that it's a driver problem and hardware supports hosted networks.

  Also, sometimes when I turn on my computer, the WiFi does not detect the AP. It's the continuous offshore. I can get the connectivity by deactivation and reactivation of the interface. A pain. Not a big pain, but pain. Looks like the driver reload or turn on the radio after that sleep does not work properly.

  Can Lenovo if you please provide a stable driver for the Broadcom chip work.

  Thank you.

  I ended up completely reinstall windows 10 and uses the stock drivers.

  No bloat ware lenovo. Works fine now.