Brightness, stuck on the VERY low windows 8.1

Similar Questions

• The very low vertical lines are coming up on the screen in 4 or 5 places on my KDL-65HX925

  The very low vertical lines are coming up on the screen in 4 or 5 places on my KDL-65HX925. Sony India assistance team is subscript, but to change the Panel also did not help.

  Now the expensive game is with the service center for over a week and they refuse to return the whole and execution of R & D with no idea. In India, it is better not to go for the set bonus from Sony because they are not able to provide support.

  But people do you have any idea what is the cause?

  I'm sorry to hear what is happening with your TV. Only a technician can diagnose what's wrong with your TV. Unfortunately, we are unable to help customers outside the United States. I suggest that get you in touch with Sony India help on this issue.

• Windows 10 roll back stuck on the recovery of windows erroe!

  SATURDAY, AUGUST 29, 2015

  I HAVE windows 7 & I update to windows 10, some back weekend, but now I restore windows 7 while reversing sturdiness error and my dell inspiron 570 pc are blocked on windows error recovery here give it what the launch starup repair choices or work normally, I try the two stars windws & retuern in the same place

  I try f8 and do no work

  I'm hoping to help here I do not loose all my pic file and doc.

  I'm looking for meet support technique dell no response also Microsoft to discuss with technical support online.  I hope some one have a solution for my case

  Thank you

  Files should always be saved externally because a hard drive can die at any moment.  All files that are not saved are to be evaluated as worthless.

  But you can save files on hard drive USB flash or external operating system starts plu using copy paste & - in the Windows Recovery Console with your support of OS install kicked, or by downloading and burning to CD with Windows Image Burner Paragon Rescue Kit Free Edition free 11.0 on another PC.

  If you have the Windows 7 DVD or CD repair, try to run Startup Repair to obtain best results.  If this fails and you still want to try and fix it so all that can be done here is for Troubleshooting Windows 7 fail to start .  I'll help guide you through these repairs, if necessary, to answer here, because I'm more seven forums.

  At some point, you can jump to a clean reinstall Windows 7 which includes everything you need to get and maintain a perfect installation.  Be sure to remove all partitions during the installation of punt.

  Once installed, completely updated, activate, then follow the upgrade to Windows 10 - Microsoft

  You can get around get Windows 10 app in the system tray to install Windows 10 using the media - Windows help authoring tool.

  Check the box in the first option to automate the process or select 'to another PC"to create bootable flash media or download an ISO to burn it to a DVD with the drive of Windows Image.  Now you have media to reinstall or need repairs.  But to run the upgrade, it must be opened in Windows 7/8.1, click right installation to run as admin file.

  To improve chances disable the upgrade everything at startup:

  In Windows 7, type msconfig in the start search box, clear all the options on the tabs Services and start-up, after masking all the Services of Mrs.  Apply and restart.

  Uninstall any antivirus except Defender.  Bloated AV like Norton, MacAfee, AVG and Avast need to have special tools to remove uninstallers (removal tools) for common - antivirus ESET Knowledgebase software.

  Stick with the Defender into Windows 10 for better performance and protection.  If get infected you add inexpensive real-time protection of the best-in-class free Malwarebytes malware scanner.  I would also periodically scan with SUPERAntiSpyware or the most powerful AdwCleaner, also best-in-class and free.

• Lightroom is more lance - gets stuck at the opening and windows 10 says "does not.

  My Lightroom lance app is more properly on my new windows 10 PC.  The application launches for a while and then crashes with the message "not responding" and the infinite blue circle rotation.  I had uninstalled the software and re-installed the first time I had this experience, and it has actually worked properly.  However, a day later and after a restart, the application is to bog down.  How can I solve this problem?

  Please click on the link below and the update of Lightroom 6.1.1

  Lightroom CC 2015.1.1/Lightroom 6.1.1 update

  Let me know if it helps.

  ~ UL

• Too bright screen on the lowest setting on Windows 8

  I installed Windows 8 on a Lenovo X 220, and now the screen is much brighter even on the setting low compared to what it was on Windows 7. In Windows 7, I was able to adjust the brightness in 20 increments, now it's just 10 and the bottom seems to have disappeared.

  Hello

  Check with Lenovo support, their drivers and documentation online and ask for their
  Forums about known problems. You may need to update the BIOS, chipset drivers,
  video and other drivers. The video device and the drivers will also reflect methods
  to adjust the brightness.

  Support from Lenovo and downloads
  http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.do

  Lenovo forums
  http://forums.Lenovo.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I'm stuck in the windows 8.1 update

  I'm stuck in the 'circles' of windows 8.1 update. I can't do all the functions described here. I do not have access to the functions of the mouse, Windows key + X key does not work, nothing. I've tried everything. Slide the mat mouse, ctl, alt, DEL, keys function, impossible to get an answer with any one of the instructions listed here. I thought that this 8.1 bug has been fixed since last year, but I do not. It has been "circling" for nearly three hours.

  Hi Terri,

  This issue may have caused due to the Internet connection or program third party or app. I would like to know some information about this problem so that we can help you further.

  1. do you get any error code or error message?

  2. what type of Internet connection do you use?

  3. have you plugged other external devices that mice?

  4. have you installed a third-party security software on your computer?

  As a first step, try to disconnect all external devices other than the keyboard and mouse if you have connected an and check if the update is installed or not.

  Manually restart the computer and then try the following and see if it works for you.

  Method 1:

  Run the Windows Update Troubleshooter, and check if that helps.

  Follow the steps to run the Troubleshooter:

  1. Press Windows + Q on your keyboard to move to the search option.
  2. Troubleshooting type, and then click Troubleshooting.
  3. Now, type Windows Update in the option Search .
  4. Click on the troubleshooting Windows Update tool and follow the instructions to run the troubleshooter.

  Method 2:

  Put the computer in a clean boot state, and then try to install Windows 8.1 update and check if the problem persists. This will help you determine which third party/PPP program is causing this problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7 or Windows 8 / 8.1:
  http://support.Microsoft.com/kb/929135 
  Note: After the boot minimum troubleshooting step, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Please reply with the status of the issue so that we can better help you.

• Stuck on the screen "Please wait" or "Configuring windows. Do not turn off your computer.

  I'm under 64-bit Windows 8

  Apparently, I scanned my system with a complete analysis of the system (AVAST) and my computer left thinking that it would take several hours. When I came back, my computer automatically shut down because it was left idle for about 4 hours. I don't know if the scan is finished. When I try to start, the screen becomes screen stuck on "Please wait" or "windows setup. Do not turn off your computer.

  I already tried to go on the System Recovery Options screen, then will solve the problems, then Advanced Options, but I tried everything what it and the problem persists even when I tried to start in safe mode. I tried to go to the command prompt, and then type sfc / scannow, but he says he cannot parse now. I also tried chkdsk / R, but it said the same thing. I don't know how to run cmd as administrator from the System Recovery Options.

  So now I tried to use system restore, but I'm stuck on the logo of windows for about 1 and a half hour. I don't know if I have to wait for it or it is already blocked. In other forums I've read, they were using only the Group of drive 'C:' connected with system restore. Should I do this?

  I think to delete AVAST or turn it off somehow.

  Please help me.

  Problem solved

  I would like to share how I solved the problem. I was able to start using the windows 8 cd and in the window that asks you the language of the windows 8 needs to be installed, you can see below "computer repair".

  After clicking on it, it automatically prompts me for advanced boot parameters. First I tried the auto repair, but it says the same thing, '.. '. can't fix right now... »
  So I tried the option "pc refresh. I waited a few minutes to cool to do and after the process, it is more hung please wait screen when starting.

  Once connected, I installed programs have been removed. In the local disk files, there is a new "windows.old folder ' showing all programs that I have the old system. Re-install program is easy and the best thing is that I have my computer back.

  My deep gratitude to those who helped me. Thank you!

• sound is very low, harman kardan sys. built in

  can not get the very low volume

  just installed SP1 & 2

  problem is on everything that needs volume

  E-mail address is removed from the privacy *.

  Thank you

  Hi larrymcdonald,

  You try to increase the volume of the volume control dialog box. Later, check to see if the problem persists.

  For more information, refer to this link: to change the volume of the system

  Reference: No sound in Windows

  Hope the helps of information.
  Please post back and we do know.

• Top of the POPs (in Windows 7), but it should not

  Hi, I just removed some addon I had, and all of a sudden, after the restart, firefox displays now the header of the very unsightly window of windows (the upper part above the content of the window, with buttons to minimize, maximize, and close the window.

  Is there a way to fix this, I really liked it better before

  HI bernardosgr,
  Please see the menu '3-bar' and click on '+ customize' and toggle the title bar.

  I hope this helps!

• Satellite P200-1EE - Vista stuck on the homepage

  Hello

  * My Satellite P200-1EE is stuck on the progress bar Windows Vista since yesterday morning * and I'm unable to contact my office.

  I tried several solutions using the F8 key at startup.

  1 / safe mode

  2 / startup repair. "Windows cannot repair this computer automatically.

  3 / the system restore. "No restore point.

  4 / windows complete PC Restore. "No restore point.

  5 / Windows memory diagnostic tool. It is said that there is no problem of memory.

  So I am only left with the options of 'Restore the full Windows operating system' and the 'command prompt '.

  But I'm not too sure of the latter option. That's where I need your advice.

  * If I go for complete Windows restore, the entire hard drive fade or just the partition where I have windows (for example, "C:")? * I have several years of family photos on another partition (D or E) that I would not lose enough.

  Obviously, * I do not lose data or software on C:, but not personal stuff D or E.*
  Could you advise me on the best option?

  Thank you

  Paul

  > If I go for complete Windows restore, the entire hard drive fade or just the partition where I have windows (for example, "C:")? I have several years of family photos on another partition (D or E) that I would not lose enough.

  Depends on the disc that you would use if you want to use the Toshiba recovery disc, then the whole HARD disk would be formatted, including all partitions on the HARD drive.
  If you want to use the disk in Microsoft Windows Vista, you can choose which partition has been formatted and where the Vista must be installed.

  > Clearly, I do not lose data or software on C:, but not personal stuff on D or E.
  > Could you advise me on the best option?

  If you n t want to lose the data stored on the D partition and if you don t have a disc of Microsoft Vista, install the OS of Visa then I would recommend, remove the laptop HARD drive. Then plug the 2.5 SATA HDD with a USB-SATA controller then this HARD drive to another computer.
  Usually, you should be able to access the D partition and would be able to move all the data to another computer.

• Very low volume on Portege R500

  The volume on my R500 (R500 - 11 c to be exact) is ridiculously low. Only with the volume at maximum (100) and using headphones I hear nothing, and even in this case, it is far too low to be useful. I can just do the test sounds to the left and then good listener when using his test detected in Control Panel-> Sound-> speakers (there no helmet to choose)-> Properties-> Advanced-> test. Unplug the headphones I hear nothing in the speakers, because of the (very low) sounds made by the fan and HARD drive. Play music (with headphones) I can just do the sounds are produced, but I can't even on what is happening.

  I tried the things mentioned in the "Satellite 5105-S901 sound is very low (even at max volume) to aid driver Toshiba ' thread without success (including the Loudness equalization).

  I am running Vista Business 32 bit and have tried the driver_audio_realtek26117B.exe, driver_audio_realtek_TC00157600B.exe and Vista_Win7_R243_x86.exe the driver files and also used the util_mute_off_25847B.exe utility.

  Enabling silent makes the already weak sounds go completely silent, so I don't think it's a matter of mute.

  Jack detection works, I can see that in the Realtek HD Audio Manager program. Using sound test of this program (Configuration of the speakers) I have to go to a completely silent, and even in this case I can't hear something on the right headphone. (I think, it's darn so low, that I could imagine I hear.)

  Decreasing the volume slider sound 100 harder almost inaudible noise similarly points out, and around 45 it is more audible even in a quiet room with headphones.

  So it seems that I somehow need to reset the audio chip in a 'normal' level Or it is broken and does not display anything more audible.

  Does anyone have ideas, what I can try next? I can boot XP or Linux, if anyone has any ideas on how to get her here, just to start. (They are silent as well, I did not like extensive tests under those as Vista).

  Hello

  According to your message, you have tried to increase the volume by using all possible options
  Have you tried to increase the volume in Control Panel-> Realtek HD audio manager?
  Check this box

  You also tried to update the Realtek audio driver.
  Did you use the Realtek page directly?
  Check it!

  If this will not help, you might try the laptop with the new system recovered

  But if this does not improve the volume, then this could be a hardware problem

• Mono recording has 2 waveforms, 1 very low Amplitude

  Hello

  I am changing a mono recording. However, I have 2 waveforms. It is almost flat and short along the mark dB infinity and the other from the voice that I have saved. The registration of a person speaking was made in a room untreated. The (gun) microphone was farther from their mouths that ideal. I guess the low amplitude waveform is probably echo chamber.

  I was initially concerned about the implications on the Assembly. Now I think that given the very low amplitude of the waveform "2nd" (which will appear as a flat line unless I Zoom in so close I can see the sampling points) I can ignore and just edit to higher amplitude waveform.

  I would like your comments on these thoughts please.

  Thanks a lot for any assistance.

  Bryce

  Slacks247 wrote:

  I am changing a mono recording. However, I have 2 waveforms. It is almost flat and short along the mark dB infinity and the other from the voice that I have saved. The registration of a person speaking was made in a room untreated. The (gun) microphone was farther from their mouths that ideal. I guess the low amplitude waveform is probably echo chamber.

  Yes, as mentioned you are in multichannel mode. But, one microphone will produce only a single output, so at best this other waveform will only be noise. So, if you simply convert the channel with the real signal in a mono track (which is all you need), then the ambiguity apparent will disappear.

  So, you cut the track with noise (click the L or R button until the track you want to cut gray goes), go to "save under" and change the type of the sample in Mono in the Panel that opens, give the new file a name appropriate and save it. Gives you another advantage - don't you change the original track more, so you'll always come back if you change your mind about what it is. And we see this as a good practice anyway!

• Computer says disk C and F are weak and memory Windows is very low. and I have the same thing in so many programs.

  I have windows xp home edition, he received from a friend. Tells me disk C and F are close to full. Make cleaning disc, but not enough. AND says the window is very low on storage space. Don't know what to delete and keep programs are

  http://Windows.Microsoft.com/en-us/Windows-Vista/preventing-low-memory-problems

  Read what you and answer a few questions about your system:

  1. What is your current antivirus?

  2.

  Click Start, run and enter in the box:

  Msinfo32

  Click OK, and when the system info summary appears, click on edit, select all (Ctrl-A), copy (Ctrl-C) and paste (Ctrl-V) the information back here in your next reply.

  You can change the personal information.

  3. look in disk management, how many partitions? How much free space on each?

  4. optimize your pc:

  Stanley Zhang tips

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  ·                                 MalwareBytes (FREE)

  ·                                 SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

• I have Toshiba laptop running Windows XP Professional edition. I have a vertical line on screen ranging from very high to very low. It's about an inch from the right side of the screen. How can I solve this problem?

  I have Toshiba laptop running Windows XP Professional edition. I have a vertical line on screen ranging from very high to very low. It's about an inch from the right side of the screen. How can I solve this problem?

  Sorry to hear that, but the screen is bad and must be replaced!

  Good luck! Please rate me upward if you find my post helpful. Thank you!

• Volume of the voice channel Windows 7 very low, all levels of thin volume.

  Hello

  I have problems with a recent installation of Windows 7 Ultimate 32 bit.

  Problem:
  All the sounds of voice work, but they have a very low volume. I tend to have to reduce all the other audio almost minimum, then come out the volume of the voice, the speaker volume and mixer Volume volume even hear max.

  This is true in games, both running in and out of the compatibility mode. This also applies to Windows Media Player videos and games in the browser and video in Firefox. It's even true in the unit.

  Tried solutions:
  On other forums, similar problems of some other people:
  -a suggested that I have turn off the cancellation of the vote under Kaeroke in sound effect Manager, it is already disabled.
  -a suggested that I put CP > Sound > Communications tab > in the 'status quo', no effect.
  -tried reinstalling the drivers, once again, no effect.
  -A forum suggested to another with the same question that he installed 64-bit windows 7, is not viable as 64-bit installs (despite the fact that I'm on Ubuntu 64-bit.)

  History:
  Previously, in windows XP SP3 it worked well, as it does now on Ubuntu 9.04 (Dual Boot)
  The change seems to have occurred at the same time that the installation of Windows 7.

  System:
  OS: Windows 7 build 7800 Ultimate.
  DirectX: 9.0
  Audio driver: Realtek AC 97 Audio (R) to Audio VIA controller. Version 6.0.1.6305 (current version)

  Please let me know if you need additional information or have any suggestions on how to solve this problem, it is quite frustrating.

  Thank you for your time.

  There has been no updated drivers since, however... I don't know how it works, but somehow update on the side of my computer of 9.04 ubuntu 9.10 seems to have fixed...

  No idea how it worked, I have made no other changes to system register windows virus definition facilities.

  Weird.

  Anyway,.
  Thank you for your time.