Windows 10 roll back stuck on the recovery of windows erroe!

Similar Questions

• 8 flow HP stuck on recovery: 8 HP stuck on the recovery flow

  Dear friends,

  I have a flow 8 Signature Edition, as soon as the update of windows 10 has been launched, I installed it. After that, I tried to reset the tablet to get a clean install and erase all my data. It got stuck, and after much research, I got the Tablet via a cable otg with the recovery image on an sd card.  At the procedure and went smooth until I got to the screen where I have to decide clear or not module TPM. I want to click 'Yes', but because that I do not connect a cable otg and touchscreen keyboard is disabled I'm not going anywhere. It was a touch on the beginning of the procedure but now its stuck on the screen that I mentioned previously (see photo below). Tried to touch, buttons, power + volume down, connect the keyboard or mouse, even empty the battery and recharge. Nothing has worked, still stuck. What can I do? Even if I have to reset everything again is there a solution? Thank you

  

  Hi, I can not see the image yet, try holding down both the volume up and volume down at the same time turning to reset the BIOS.

• Stuck on the recovery disc #1

  I am trying to create a disk recovery for my new dv3-2150.

  The Recovery Manager HP telling me to put in the 1st 3 DVD-r

  After burning it, it ejects the disc and writes a message on the screen:

  Enter the disk you just created and close the player.

  I do this - and nothing happens... the only thing I can do is "Cancel".

  Tried to change the drive, tried to boot... Any IDE?

  BTW-can not order by post the disc of HP recovery at this time.

  Solved!

  I called the local support and that's what they said and it worked right away:

  (1) use the secure when burning discs

  (2) ESS 'dvd + r disks' - they are more sutale for the dvd player

  BTW - some support centers will tell you to upgrade the BIOS, some have told me it back to the original version. In my opinion it made no difference and the safe mode was the reason why he's working. I guess that some files are currently in use and had all stuck...

  What would you do if when you bought a new car, you couldn't get a spare key? Need to consult the internet for a way to run to the store to get a proper special key and make sure that your car runs on special fuel for the key to work?

  Sounds like a good joke? However, it works.

  Happy new year to everyone.

  Dvir

• Stuck on the recovery image installation

  Hello. I ordered a toshiba recovery USB.
  Just installed the os system but I am stuck on final installation, it says please wait... The installation may take several minutes
  Please do not interrupt or shut down the computer.
  Its been stuck like this for an hour and it won't let me access anything that anyone else!
  Ive tried researting does not not even tried to reinstall the recovery and still blocked?

  It is not easy to say what the problem is here. Try to format HARD drive and launch the installation of recovery again.

• Installation interrupted and stuck at the recovery screen

  It's a new hard drive and during the installation process of vista that power was cut off, now at the start of the central unit, it goes directly to the recovery screen and will not continue.

  We have all discs from nec for vista and drivers and others.

  Help, please

  Go to the command prompt in recovery and type format c:\ Enfironment and enter.  This will wipe the drive clean of everything so you can start fresh installation.  Then try to reinstall.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• PC HP Compaq 8200 Elite MT: Should I roll back before flashing the BIOS?

  Hello, I am trying to determine if the update of the BIOS shown on your website is right for my machine: HP Compaq 8200 Elite MT PC. After selecting 'Let HP find my products,' he identified my machine and sent me to a page that asked me to 'Select language driver and OS' two squares. I selected my language, then going on to the next box that asked me to choose my operating system. However, it does include all the Windows 10 selections. I used to have initially Windows 7 Professional. However, I've recently upgraded to Windows Professional 10. Is it safe select the operating system Windows 7 Professional, even if I is no longer on the machine? You see, I want to update BIOS, because I'm having trouble starting after I install memory upgrades, and the provider of the RAM is recommended to upgrade to the latest version of BIOS upgrade before installing the upgrade of RAM, to eliminate these problems. I don't want to make a mistake, and then select the wrong BIOS update. There is an update of the BIOS on HP.com for my MoBo machine, but only for Windows 7 Pro. So should I go back to 7 Pro, before the update?  Please, inform me as to what I should do.

  Hello:

  I just got the flash drive, I use to update BIOS on my HP business desktop PC.

  I plugged in my dc7800 CMT W10 also running.

  The window on the flash drive, and I closed it.

  Then I went on the desktop, click on this PC, click with the right button on the flash drive, which is drive E:\ in my case.

  Then I chose the Format from the menu, and a box will open.

  In the file system drop-down list that I get on my USB flash drive, I get the following options:

  FAT (by default) which is what you want to use.

  NTFS

  FAT32

  exFAT

  So if you don't see these options, try another flash drive.

• Re: How to get Corel WinDVD without using the recovery disk?

  The update for Corel WinDVD was rather messy and because of this some owners laptop uninstalled to try to install the new software. Now, we ended up with the only possibility of an image recovery, which, in practice, means losing the software.

  Updates for the Bluetooth and wifi are also pretty messy.
  Is isn´t possible to get this software back without using the recovery disk?

  As you probably know recovery image installed on Toshiba laptops is a kind of software that includes the operating system, drivers, tools specific to Toshiba and utilities but also some additional software like antivirus or DVD player application.

  All drivers and Toshiba tools and utilities are available on the Toshiba download page, and if you want to install the version of the OS, you can download each of them.
  This additional software is not available for download. It's a kind of gift on the owner of the laptop because as the new owner, your machine must be ready to employment with full protection and opportunities to use multimedia content.

  If you don't like it, you can remove the system and use your own applications.

  Summary: this software cannot be downloaded separately and if you want to have it again, you must install original image of recovery designed for your machine.

  If you have any other questions do not hesitate to ask.

• Stuck on the screen of HP recovery and cannot start windows

  HP Pavilion
  Model: 17 - 1215dx
  
  If you need the serial number or the fn, just ask. I didn't post too much sensitive information.
  
  It was originally 10 64-bit windows... but now has 8.1 Windows 64-bit
  i5 8gig of RAM processor
  
  Literally just close the lid and open it upwards and it wouldn't boot windows. It is stuck at the screen HP saying it's diagnose my problem. Tried a soft reset and a hard reset when you remove the battery and put it again while it is unplugged. Did not help. I can't start in safe mode. I tried to do a restore which has been a success but it restarts when he says "there was a problem, restart your PC. I'm frustrated and reset a factory and the same factory reset was successful and was when he came back to 8.1 because it's the OS, I bought it with but then it still wouldn't let me in windows. I was going to try and start to repair, but if I had known this would require an administrator I'd never have done the factory reset. I know I've been reckless, but I just wanted to work. But yes, I don't know what the problem is. I feel like if it was a hardware problem is just something to keep windows to operate. Should I try a repair disk? Would that help?

  The SecretLight

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post you need to grab your laptop and wanted to help - but we need more information.

  You said that your laptop came originally with Win10, but then later, you said you tried to go back to Win8.1, you can then said, it's the original OS.

  So, who was the original - Win8.1 or Win10?

  Ask because if it came with Win8.1 and you UPGRADED to Win10, while Microsoft tells you that there is no risk in the upgrade of Win10, because they allow you to believe that you can always go back to your original OS and setup within 30 days, the ugly matter faction is that the Win10 GoBack feature turned out to be unreliable - and when it fails She can let the machines in a corrupt State - which is not always the case, it happens often enough to be a problem, but you will get no warning beforehand that he goes to the trash your PC!
  
  The Win10 upgrade is known, in some cases, corrupt the partition of recovery that are stored by the OEM that built the original machine.  It's pretty much guarantee that no HP recovery will work.
  
  What will work restores your computer to its original factory state using HP recovery media. It is a set of DVD and a CD or a USB key, which will erase the hard drive (removing all data, applications and settings, reinstall the original OS, drivers and utilities for HP. In some cases, you will be able to order a USB instead of discs.  You must order at HP; they cannot be downloaded.
  
  You can look online for recovery from the paged media related: http://support.hp.com/us-en/drivers
  
  Once there, enter your product name or number. On your software page and download the drivers, select your operating system and version. Click on "Update".  If the HP recovery support is available for your computer, down near the bottom of the page, you will see an entry for the command Recovery Media-CD/DVD/USB. Click on the symbol '+' to expand this entty and click on order to press for more details.
  
  Or, if you prefer, you can do the same by contacting HP Customer Service:
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!

  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the thumbs-up symbol to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• Back to the recovery partition after installing Windows 10

  Trying without much success to help a friend with a Lenovo ideacentre B310.

  He had apparently been does not work properly under its native operating system Windows 7 and the owner has tried the free update of Windows 10. The cmnputer has not since then start beyond the blue logo of the Windows 10 flag.

  I tried a reset by using the F11 key which got through the whole process of restoration and reinstallation of probably Windows 10 but then frozen 100%.

  I have since installed successfully from a WIN Pro 10 CD, but it's understandable without a free license has been applied as it was a clean install.

  What I want to know, it's the recovery on the still Partition PC contains the original OS? If this how I start and recover to factory condition of the PC having in mind that the PC is currently the trial version of WIN 10 with a limited number of days of use before a product key must be purchased.

  Data loss is not a problem, I just need to go back to factory State and then move on from that.

  Problem all sorted. I didn't realize that you could install the applicable version of REMPORTER 10 of the tool of creation of media these days and use the product key from the COA of WIN 7.

  I'm assuming that I come back to a working version of WIN 7 before I could then upgrade to a licensed version of WIN 10.

  Thanks for all the help.

• I cannot roll back the driver for Realtek PCIe Ethernet driver on Windows Vista.

  Original title: Roll Back Option is disabled under the device driver properties

  I uninstalled the Realtek PCIe Ethernet driver by mistake & then installed the other driver I found site Web of Realtek. but now if I want back with the previous version of the driver, this option is not active. so is there another way to push back with the driver already installed?

  the link skydrive screenshot for your reference is https://skydrive.live.com/#cid=D98B7D8BBADFB4CF&id=D98B7D8BBADFB4CF%21105
  Please advise with the solution.
  Rgds,

  Hello Asif,

  Thanks for keeping us posted and share this information with us.

  Method 1-

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Note: Make sure that recover you the computer to a Normal startup after you perform all the troubleshooting steps, because the computer can be a risk of infection by the virus.

  Now, try a system restore.

  Back to us for any issues related to Windows in the future. We will be happy to help you.

  Thank you.

• Is no longer able to install windows updates after factory reset (windows service exception / failure set up the updates of windows roll back)

  So suddenly, I wanted to start my 3 month old laptop, but found that it was getting a system service exception.

  After hours of troubleshooting, I decided to go with a clean installed, this has completely fine until I installed the updates of windows (I have to install these updates to return Windows 8.1)

  After you install all the following updates occurs after a reboot:

  -Default configuration of the windows updates, roll back later, I get a system service exception.

  - Or directly a system service exception.

  These problems are solveable by a system restore to a point that has no updates.

  The next thing I could try is install the updates of windows 1 by 1 to see the update is causing this particular problem.

  If anyone has a way to solve this problem please help.

  The following link is a dxdiag to my machine:

  http://pastebin.com/Bfmxive7

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  http://support.Microsoft.com/kb/949358

• How to restore files that have been backed up for a recovery of the system on WIndows 8?

  My Windows 8 would not start due to a corrupted boot critical file. I had to do a system recovery, but he asked if I wanted to back up the files, I did. Now how to recover these backed up files?

  Hi Jeffry,

  1. How did you perform the system recovery?

  2. have you used the options provided by the manufacturer of the computer or the recovery partition?

  3. What is the brand and model of the system?

  We can refer to the article and try the steps to restore your files.

  How to use the file history

  If you have used the system recovery options provided by the manufacturer of the computer, then you can also get in touch with the manufacturer of the computer to restore the backup files.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Windows 8.1 remove with the recovery tool, can I get it back

  Hello

  I have HP ENVY 15-j101ex NB

  I installed UBUNTU and all hard disk delete, to restore the Windows OS 8.1 and how? The laptop still on warranty

  Thank you

  Use the recovery media (usb or recovery disks set) that you must have to preform a factory image reecovery. This will make your PC to the State in which it was delivered to you. The recovery media contains also all hardware required for Windows 8.1 drivers.

  If not create you a game, you can buy a HP usb media to $25.00 USD.

  Looking for a drive USB recovery or recovery discs?

  Do yourself the favor to get the recovery media USB instead of the set of recovery disks.

  The USB key is, unlike the recovery set, durable, very fast and reliable disk.

• Stuck in the loop "Windows Error Recovery".

  Whenever I turn on my Gateway laptop, I get "Windows Error Recovery" screen.  Any choice I chose, I only end up return to this screen.  On the advice of a professional, I dug my recovery dvd (created using my computer laptop shortly after purchase) and tried to use it.  I tried different ways to use the restore disc but cannot find one that works (by pressing 'R', F8, F12, F10, Alt F10).  I know I must be missing something... How to use the restore disc?

  Thanks for your help!

  KZ

  Hello

  boot you from it

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  change the boot order it do dvd drive 1 in trunk thern and order to boot from the recovery disc

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• Windows 7 install "stuck" on the HP Pavilion 17 laptop

  HP, I am trying to install Windows 7 OS that I am unhappy with Windows 8 (sorry).  I did for I think almost the last step, but the Windows 7 splash screen is "stuck".  To date, I have disabled Norton, I disabled the Secure Boot, I changed the boot order to CD/DVD-ROM internal drive then I restarted the laptop with the new HP operating system disk Windows 7 Pro DVD in the drive.  Everything seemed to go ok until he "started" (restart) with the familiar screen of Windows 7 and is "stuck" there.  I was just before he should have asked me for the key.  I tried to go back to Windows 8, and it does not start, so I'm currently leave "Reset" itself, and then I intend to try again.  Why am I 'stuck' to the Windows 7 boot screen?  Thx for your help!

  Ok.

  Please make sure you create your W8 recovery media set before installing W7, because after the installation of W7, the recovery partition very probably will no longer work.

  Check out this guide on how to do this.

  http://support.HP.com/us-en/document/c03481733

  Fortunately, your model is pretty easy to get off at W7 driver-wise.

  Here's what you need to do the drivers for your model:

  You can use all the 4540 drivers s of HP Probook except audio player drivers and card.

  Use the Intel HD graphics to your model driver.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=5229457&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswEnvOID%253D4059%257CswLang%253D%257Caction%253DlistDriver&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Audio: Accept the agreement, download and install the driver for the second on the list (64-bit).

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  This model card reader driver should work on yours.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5405424&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_125075_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken