Too bright screen on the lowest setting on Windows 8

Similar Questions

• I have a aspire 5253, power watch normal bright screen with the logo Acer and F2 set up

  I have a aspire 5253, power watch normal bright screen with the logo Acer and F2 put in place down, but only for a few seconds, then it goes very dark, almost impossible to see what is on the screen, but there is something.

  I connect a monitor to the VGA connector and th PC works fine.

  I've updated the drivers, but it shows always available, as the main screen attached to the was'nt PC he all of a single screen

  to detect not to bring, and isentified on ly show 1 on both screens, PC built in display still very dark, like the backlight is not on

  reboot always perfect watch on the screen for a few seconds then dark

  Thanks for help

  by chance, I moved the cable button / stop for the Office and the screen turned on

  I checked the cable, it was slightly broken by the brokrn hinge

  I just had to cable and now it works fine

• I recently accidentally dropped my laptop and now whenever I try to turn it on, it gets frozen on the screen with the logo of "starting windows."

  * Original title: start Windows 7

  I recently accidentally dropped my laptop and now whenever I try to turn it on, it gets frozen on the screen with the logo of "starting windows." When it disappears, the screen just goes black and nothing else happens. Logins appear not at all. I also tried to run in safe mode and safe mode with networking mode, but it has not loaded yet even to the windows splash screen. I ran Startup Repair 3 times now and he has not yet fixed my problem. I was wondering if it might have been damaged in the fall.

  Probably yes it is damaged in the case otherwise he would start.

• Too bright light on the screen of Portege 3440CT (running Windows 2000)

  Hello

  Do you know how to reduce the brightness on the screen of the laptop Portege 3440CT running Windows 2000?

  I have another question about the 3440CT Portege battery: battery charge never, I can't solve the problem, I left the power supply 8 days but battery levy at all! I had the same problem with a second battery?

  Any ideas?

  Kind regards
  Jerome

  Hi jnessi,

  as far as I know, you can change the brightness of the P3440 with the key Fn and F2! Agic otherwise your settings in the tool!

  If two batteries are as old as the portege, it may be that this batteries are too old!
  Otherwise your electronic of power supply is damaged, but I do not! ;-)

  Good bye

• My computer is stuck on the preparation set up windows do not turn off the computer__

  I bought a new Toshiba Harvey Normans form - everything was going well until I turned the thing on and comes from this sign prepare to set up windows do not turn off the computer - 30 hours so far... everybody is why if there is a problem is - it may not be fixed. I cannot F8 or do something because when you stop and restart the computer, what happens with the same... also say how I get to the menu restore when I can't cross the saying prepares to set up etc etc, I'm typing this from my old computer and I get very very stressed to this topic

  Take it back to Harvey Normans. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Laptop black screens after the latest updates of windows... wil not booting in SafeMode (black screen).

  Windows Vista 64-bit... Black laptop after the latest updates... windows screens will not boot into SafeMode again black screens.

  Hello

  I would suggest trying the following methods and check if it helps.

  
  Method 1:

  Try the steps in the following Microsoft article and check if it helps.

  Windows Vista or Windows 7 unbootable, and the Startup Repair tool does not resolve the problem:

  http://support.Microsoft.com/kb/934540

  Method 2:
  You can refer to the link below and check the drive for errors:
  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Warning: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  If the methods mentioned above do not solve the problem, then it would be best to contact the manufacturer of the computer.

  For more information, see the following Microsoft article and check if that helps.

  
  Why my screen is black when I start Windows 7? (Applies to Windows vista)

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows Vista

• How to bypass the login screen of the mode standby in Windows 7 Professional with active screen saver

  Here is the solution/answer:

  1. go in Control Panel

  2. click on "personalization."

  3. on the lower right corner to say 'screen saver '. Click on screen saver.

  4. in the scree of Eve window between the 'Screensaver' name and the power management box is empty 'Wait' then 'minutes '.

  Right of "minutes" is a block that says "on resume, display the login page.»

  5. If the "On Resume, the logon screen" box is check uncheck.

  6. click 'OK' your done

  This works if you have an active screen saver and works.

  Hello

  Good thing Mark a. Kite!

  Anyone having this problem should also consult:

  Control Panel - Power Options - left requires a password on Wake-Up - tick don't
  Require a password - save the changes.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Black screen after the user logon in Windows 7

  Hello
  I use Windows 7 ultimate x 64 on my desktop. Recently, I just turned on my PC and when I tried to connect to my account after the Welcome screen, a black screen came up with the cursor and nothing else has been demonstrated. He just hung there.
  There is another account in which I can start but it freezes and does not respond. I can boot into safe mode but no icons, programs do not start which is pinned to the taskbar and I must run firefox.exe via the Task Manager... System Restore does nothing. I do not have the disc to install windows 7. All other patches? Please say.

  Also, the black screen goes after 40 minutes or more and I'm able to use my pc.

  Help, please.
  Thank you.

  Hello

  It looks like certainly there is some sort of virus on the computer. If this is the case, your files will not be deleted but they could have been hidden. So, please run a full scan the system for viruses.

  
  Method 1: Microsoft Safety Scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection. For a real-time protection that helps you keep your home or small office PC against viruses, spyware and other malicious software, download Microsoft Security Essentials.

   

  Method 2: Clean boot

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Follow step 7 of section of boot KB929135 to the computer in normal mode.

   

   

  I hope this information helps you!

  Thanks for trying to help me but I used Unhide.exe available on the website of Brian and my files are back.

  Thanks Brian. : D

• How do I change the language setting in windows vista edition Home premium.

  I have a sony vaio that runs on the Italian version of window vista Home premium. How can they change the English language instead of Italian language

  I gave you information on what to do.

  Here is the link to Microsoft:

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-display-language

  See you soon.

• Satellite A300 - too bright screen and lack of contrast

  Is it irritates me immensely

  No matter what I do, there seems to be no way to add contrast and reduce the brightness of the screen on my laptop.
  For example, blacks show that blacks... just slight shades of gray

  I am a photographer, I like my photos and display to be precise for the colors I see in real life, so I can change them accordingly. but rather... the screen seems just washed out, more exposed, and it hurts me ' eyes!

  I tried to adjust the contrast and brightness manually by going to graphic properties, but even with the settings below, the remains of the screen bright and washed out.

  is there something I can do?
  any help would be greatly appreciated.

  That's the problem with the LCD screen. Due to the lighting, it is difficult to block all of the light using liquid crystals.

  OLED plasma and CRT screens do not have this problem. So if you want the best possible image contrast, you may buy one of these types of monitor and use it via the VGA port.

• Cannot adjust the brightness of the screen after the new installation of Windows 7

  I have a Pavilion dv2945se notebook. I have completely updated the Nvidia geforce 7150 m drivers. My laptop came with Windows Vista Home Premium 64-bit, and I did a new install of Windows 7 Home Premium 64-bit. I can't adjust the brightness of the display. I narrowed down the problem to the generic PnP Monitor driver. How can I solve this problem?

  Edit: I mean "impossible to adjust the brightness of the display" that every time I go into power options and trying to use the cursor, Windows Explorer crashes. Also, my fn + F7 and F8 keys light work before I connect to windows, but not after. I think that something will charge when I connect to windows that is causing the problem. So I went in Mode safe, but then all that allows to control the brightness has not loaded when I went into safe mode, which was not helpful. I also went into MSConfig and disabled all startup programs, but again, I have the same problem. The brightness of the keys work before connect you to Windows, but not thereafter.

  When I turn off the device generic PnP monitor (1) can't adjust the brightness at all and (2) the Power Options window stops freezing. That's how I've narrowed the problem to the generic PnP Monitor driver.

  I finally solved this by uninstalling the driver for the ALPS touchpad. Because there are no Windows 7 drivers for my laptop even though it is listed in the models capable of upgrading to Windows 7, I used Windows Vista touchpad drivers. It was the cause of my problem with brightness adjustment. I don't know why it worked, but I've narrowed it down by disabling all processes start and then from their one at a time to see what caused the problem. As soon as I started Apoint.exe, I started to have problems.

  Now, I just have to find a way to disable the touchpad tapping without the ALPS drivers.

• Blue screen with the installation of new windows on that already pre-installed

  Hello everyone, I'm sorry if this has already been addressed, and I wonder about the same thing. I found a few messages about my problem, but it did not totally help, so...

  I bought an M70 in Germany, he has Win XP it already installed, but I wanted to install my Windows with a different language. When I start the computer from the disk, there are first this blue screen saying that it is responsible for many drivers, etc.. Then, it suddenly stops when he finished to load all the stuff. There is only a cursor in the top left corner (the one in DOS mode) and nothing happens. What could be a problem?

  Is there some kind of blockade on the hard drive that prevent me from formatting the partition and install another system? My windows doesn't include SP2 on cd, usually I install it later.

  I saw at least a similar post, someone suggested to download on the site section to find information of navigation, but I failed in doing that. Can someone help me? I would be extremely grateful for any information!

  Mike

  Hello Mike

  I put t really know if included SP2 has something to do with it, but the fact is that the unit is pre-installed with Windows XP Home edition which include SP2. I think that once I read that a guy has to try something similar and included SP2 installation successfully.

  If you can get a CD of Windows XP SP2 home edition installations (any language just to test) Please try to be sure if the problem is occurring because of this. Also, make sure that there is no external device is connected so that the facilities of the process runs.

  Bye and good luck!

• problem brightness screen S405/s400 after downgrading to windows 7

  It seems OK win8, but win7 I preferred, the display is too dark even to light max. Does anyone have a solution for this? I tried to reinstall win7, amd driver update and right doing a win xp installed, hopefully amd driver works on win xp.

  subject published

  
  

• black screen during the initial installation of windows 7

  Hello. I currently have Windows Vista Home basic preinstalled on my laptop

  I am trying to install windows 7 ultimate.
  I inserted the disc, rebooted and pressed F2 and choose to boot from the disk
  After that, I get just a black screen with an underscore flashing in the upper left corner, and it seems that its not really do something
  I ran the Upgrade Advisor and he said that I would be able to install windows 7
  I have SiS Mirage 3 graphics and sound to date
  Can you tell me what to do
  What is on the disk, it is possible that the disc is damaged?

  Hello

  What is the brand and model of the computer.

  I suggest you to consult the following link.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/black-screen-with-cursor-during-install/68eb0062-9493-4A3F-8a01-3bfc85dc7b3c

• Blue screen after the automatic updates in Windows Vista

  Automatic updates caused a blue screen that says STOP: c000218 {registry file failure} the registry cannot load the hive (file): \System\System32\Config\COMPONENTS or its log or replacing. It is damaged, missing, or not accessible in writing.

  Ideas: I don't know what happened when it restarted it started this

  • will simply not get to start it to connect screen or system repair
  • Error messages: STOP: c000218 {registry file failure} the registry cannot load the hive (file): \System\System32\Config\COMPONENTS or its log or replacing. It is damaged, absent, or not writable. :
  • Recent changes made to your computer: just the updates that was supposed to be important
  • What you have already tried to solve the problem: System repair, restoration of the system or safe mode do not work

  in this case, restore your netbook factory settings. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/