Broadcast group
I can't get the addresses that I have grouped in a Contacts folder to appear in my to: box to send the same email to several people. I use Windows Mail on Vista.
Margin
MJGlaser
Here's how the groups with or without using BCC. If you named the group, then the name of the group is what should appear in the field. If you want to everyone; s name/address in the field, then just create a template and save it as eml file and forget the group.
--------------------------------------------------------
To use the functionality of the BCC (Blind Carbon Copy), in a new message window, click View | All headers and type the addresses separated by a; Or: Click the button to. You will see your list of contacts and the choice to put them in the To, CC, or BCC field. Click on an address, and then click BCC to add it. Repeat for all of the contacts you want. (Note: most of the providers have limits as to how many messages you can send both a. 25 is common, but it varies).
Put your own address in the box to. That's the only name/address that any recipient will see. If you leave the field empty, some people may not receive e-mail because of message rules they put in place, or restrictions imposed by their ISP.
You can also make an entry in the address book using your e-mail address, but put something like the mailing list in the area of the display.
*********************
You can also create groups if you send e-mail to the same people often.
To create a group of contacts:
You can create a single group name (or alias) to use when sending a message to several contacts at the same time. Just create a group name and add individual contacts to the group. Then just type the name of the group in the box for when you send mail.
1. in the address book, select the folder in which you want to create a group. Click New in the toolbar, and then click New Group.
2. the Properties dialog box opens. In the group name box, type the name of the group.
3. There are several ways to add people to the Group:
a. to add a person from your address book list, click Select members, and then click a name in the address book list.
(b) to add a person directly to the group without adding the name to your address book, type the person's name and e-mail address at the bottom of the Properties dialog box and then click Add.
to add a person to both the Group and your address book, click New Contact and enter the appropriate information.
(d) to use a directory service, click Select members, and then click search. Select a directory service in the drop-down list at the end of the text box. After finding and selecting an address, it is automatically added to your address book.
4. Repeat for each addition until your group is defined.
Note
a. to view a list of your groups separately from the list of address book in the address book on the view menu, make sure that folders and groups is selected.
b. you can create multiple groups, and contacts can belong to several groups.
If you want to send to a group without addresses are displayed for each recipient, open the address book and make a new entry. Enter the name of the group in the area of the display, but use your address. (Some Internet service providers require a legitimate address in the line to and recipients will know it's from the Group).
Click on the button to. Enter the name of the group using your address. Enter the group in the BCC field.
Bruce Hagen
MS - MVP October 1, 2004 ~ September 30, 2010
Imperial Beach, CA
Tags: Windows
Similar Questions
-
Radius of stand-alone operator console
Problems with the console program independent operator on the screen of the RADIUS. The program does not seem to be able to install RADIUS, same is he downloaded the router config, phones etc. fine.
I tried implementing the details of the radius server at the CLI level, but it did not work either.
Can someone provide an example of the system requirements?
Thank you
In my case, autonomous operator of CSC has an IP of statique.22, so it's the server.
AAA new-model
!
!
RADIUS AAA server group UccServer
auth-port 1645 192.168.10.22 Server acct-port 1646
!
AAA accounting update newinfo
AAA accounting connect h323
action-type market / stop
broadcast
Group UccServer
!RADIUS-server host 192.168.10.22 auth-port 1645 acct-port 1646
key cisco RADIUS server
RADIUS vsa server send accounting
RADIUS vsa server send authentication -
Cisco IP phone 6921 is part of the hunting algorithm which is broadcast group
Firmware: SCCP69xx.9 - 3-3-2-SR1, CUCM version: 8.6.2
When the end user not used this phone 30 Min (Aprox), this phone is having hung
The Conference will be coming to the phone, but he isn't rings and not be able to access one of the buttons, I can join the call by taking the receiver
Still one of the buttons do not work, had to perform a reboot hard to fix
Please suggest
Hello
Please upgrade to the latest firmware 1.0000 SR2 6921 phones and see if the problem persists.
Let us know if that helps.
-
Is it possible to send Radius accounting packets with two different servers?
Hello experts!
I have dilemma I send info Radius accounting on two different servers for authentication of the dot1x. Here are the relevent config. However the switch just to send a copy on the first server in the server group...
RADIUS AAA server Acct group
ACCT-port of the server 172.17.1.1 auth-port 1812 1813
ACCT-port of the server 172.17.1.2 auth-port 1812 1813accounting dot1x default start-stop broadcast group AAA Acct
RADIUS-server host 172.17.1.1 auth-port 1812 acct-port 1813 key xxxxxx
RADIUS-server host 172.17.1.2 auth-port 1812 acct-port 1813 key xxxxxxIs it possible to send two copies of two different servers? I tried the key word 'issue' in the aaa accounting command, but it does make a difference. What is doing? I can't find it in the manual...
Thank you!
Difan
Difan,
You must create two aaa server groups to operate. Allows the sending of accounting records to multiple AAA servers. At the same time returns accounting records the first server in each group. If the first server is unavailable, the failover occurs using servers defined within this group.
Accounting AAA broadcast configuration
The following example shows the turn on broadcast accounting using the aaa accounting global command:RADIUS AAA server group isp
Server 1.0.0.1
Server 1.0.0.2AAA isp_customer radius server group
Server 3.0.0.1AAA accounting network default start-stop broadcast group isp group isp_customer
host server RADIUS 1.0.0.1
host server RADIUS 1.0.0.2
Server RADIUS key key1
RADIUS-server host 3.0.0.1 key2 keysThe broadcast keyword causes the start and stop accounting for dot1x connections to be sent simultaneously to the 1.0.0.1 group isp server and Server 3.0.0.1 in the isp_customer group. If 1.0.0.1 is unavailable, Server failover 1.0.0.2 occurs. If the 3.0.0.1 server is unavailable, no failover occurs because backup servers are not configured for the isp_customer group.
Kind regards
~ JG
Note the useful messages
-
What is the code for error "the dependency service or group could not start": 1068
What is "the dependency service or group could start"?
This seems to be a HUGE problem for PC users so much; It gives rise to the error 1068 code and effects so many aspects of our machines...
What is this area of computing? What it means? If we understood this, solutions might be easier to find?From what I can deduce (I could be wrong) there seems to be a communication error; But why did affect many different areas of the machine?I recently corrected an error 1068 on an internet connection and then again on spooler print issue; Now, I'm trying to solve the error even on a sound broadcast. Frustrated? Isn't the half of it! WHAT IS THIS ERROR?the dependency service or group could not start
http://social.technet.Microsoft.com/forums/en/itprovistanetworking/thread/563b908c-AA24-4000-9b2d-b6ff02f10c56No sound in Windows
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-WindowsTips for solving common audio problems
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems -
Directed broadcasting does not
I am trying to configure broadcasting to another network segment. He has worked in the past, but since modernize us technologies (from unix to Windows platforms), it does not work.
Basically, I want the UDP traffic on port 3000 which comes from the IP 172.20.1.4/16 to be received by the host 192.168.25.107. The two are connected directly to a router in 1941.
I tried many configuration changes, without success. Here is my current setup:
interface GigabitEthernet0/0
IP 172.20.1.1 255.255.0.0
IP broadcast directed to 103
automatic duplex
automatic speed
No cdp enable
!
interface GigabitEthernet0/1
IP 192.168.250.40 255.255.255.0
automatic duplex
automatic speed
No cdp enable
!
interface GigabitEthernet0/0/0
IP 192.168.25.1 255.255.255.0
IP access-group 102 to
IP helper 172.20.1.4
IP broadcast directed to 103
IP accounting output-packets
automatic duplex
automatic speed
No cdp enable
!
interface GigabitEthernet0/1/0
IP 192.168.102.1 255.255.255.0
IP access-group 109 to
automatic duplex
automatic speed
No cdp enable
!
IP forward-Protocol ND
IP in avant-protocole udp 3000
!
no ip address of the http server
no ip http secure server
!
Driving IP profile
!
access-list 101 permit tcp 10.2.0.97 host any eq 3310
access-list 101 permit udp host 10.2.0.97 any eq 3310
access-list 101 permit icmp any one
access-list 101 deny ip any one
access-list 102 permit udp 192.168.25.0 0.0.0.255 any eq 3000
access-list 102 permit icmp any one
access-list 102 deny ip any one
access-list 103 allow host 172.20.1.4 udp any eq 3000
access-list 108 allow host 192.168.101.10 udp any eq 3320
access-list 108 allow the host tcp 192.168.101.10 any eq 3320
access-list 108 allow icmp a whole
108 refuse a whole ip access-list
access-list 109 allow host 192.168.102.10 udp any eq 3320
access-list 109 allow the host tcp 192.168.102.10 any eq 3320
access-list 109 allow icmp a whole
109 refuse a whole ip access-list
access ip-list 120 allow a whole
access-list 122 allow udp 192.168.25.0 0.0.0.255 any eq 3000
access-list 122 allow icmp a whole
access-list 123 permit udp host 172.20.1.4 any eq 3000
access-list 133 allow host ip 172.20.1.4 192.168.25.0 0.0.0.255
not run cdp
!
!
!
control plan
!
!
!
!
endAny ideas?
You're definitely on the right track, and most of your config is ok. To support what you are trying to do with directed broadcast, you need three things in your config:
(1) you need the ip forward-Protocol udp 3000
(2) you need the IP helper to pass emissions
(3) you need the ip directed broadcast to allow the transfer of emissions.
The biggest problem is that your support address is on the wrong interface and it specifies the wrong address. Support address is configured on the interface where the emissions will be from. In your case, it would be Gig0/0 and not Gig0/0/0. Support address also specifies when the broadcast would be passed and in your case, that would be 192.168.25.255. If solve you the problem, then directed broadcast should work.
I see you have some ip directed broadcast to the configured Gig0/0. You don't need it there. It does no harm to have it, but it isn't good either. directed broadcast is needed only on interfaces that will receive the directed broadcast and must transfer the package as a local broadcast.
HTH
Rick
-
+ Missed calls in groups of positions of
Hello
We see bad behavior, when a fighter Group received a call. All calls appears as a missed calls even they are answered by any member of the group. This behavior is the same for the broadcast, circulars or top-Down algorithm in hunt group.
Our call manager is the 7.1.3 version. Does anyone know how we can´t to change this?
Thanks in advance.
Daniel Espi
Hi Daniel,.
I don't apply to groups of positions, but there is a setting to disable logging of the calls on party lines that could be interesting to watch, it was introduced in 7.1 (2)
Concerning
Paul
-
The installation is in a lab with an East and West campus environment to simulate the two buildings, and everything was working fine until we wanted to use AP group VLAN. Once we have configured the AP group VLAN, updated models AP and pushed out - it broke.
All of a sudden, all the three wireless LANs (of SSID broadcasting) could not be seen, but all the wireless AP have increased. We rebooted the AP, but nothing has changed. We RESET an AP and once there she controller (via DHCP Option 43), wireless LANs came comes back online for the campus of the EAST... WEST Campus can still be seen. We have rebuilt all aspects of installation from scratch and it still happens.
Here's my question - if a WLAN is related to the Interface of wide WLAN management but is then bound to another interface in VLAN of the AP group, does the AP group VLAN definition trump the level setting of WLAN (Controller-> WLAN-> WLAN ID-> Interface) OR do the duties of WLAN/Interface must match between the WLAN controller and the settings of the AP group VLAN?
My thought is that the AP group VLAN - WLAN to configuration Interface replaces the original WLAN controller configuration Interface.
Here is the configuration:
WCS 4.2.62.11
East Campus:
Cat6506 - 12.2.18 SXF5
2 x WISN - 12.2.18 SXF5
Interfaces - East_EAP, East_WEP
WLAN/SSID-LLeap/lableap, LPeap/labpeap, LWep/labwep
West Campus:
Cat6506 - 12.2.18 SXF5
1 x WISN - 12.2.18 SXF5
Interfaces - West_EAP
WLAN/SSID-LLeap/lableap, LPeap/labpeap
Each campus is on a separate subnet to simulate two different buildings.
Of all the WISN / controllers have the same virtual Interface and are part of the same group of mobility - we want to wander between the buildings.
I attach the Leap and Peap WLAN to the same Interface (Eap_East or Eap_West) in each respective campuses and WEP on its own Interface.
(This is done in the AP group config VLAN - under Comptroller-> WLAN-> WLAN ID all the WLAN by default for the Management Interface)
I have Setup AP group VLAN for each Campus:
Lab_East_Group--> LLeap/LPeap related to the East_Eap Interface. LWep related to East_Wep Interface
Lab_West_Group--> LLeap/LPeap related to West_Eap_Interface (no wep in the West Campus).
Models of the AP are configured for each Campus specifying primary, secondary, and tertiary controllers, the name of the Group Vlan and WLAN override enabled:
Model Lab_East AP--> group VLAN - Lab_East_Group, WLAN substitute allows Leap/Peap/Wep WLAN
AP Lab West model--> group VLAN - Lab_West_Group, WLAN substitute allows Leap/Peap WLAN
You are right, and what you need to do is to have only these three controllers in a groups of mobility. Unless you all wlc on a single group of mobility. The more stable code I think is 4.1.185. If you decide to go to 4.2 then go with 4.2.112. I have this code running in a couple of my clients.
I would also upgrade the boot image.
-
Impossible to receive packets from UDP broadcast on a PPP connection
I'm fighting for two days now with no success. I have two modems (don't ask, some special stuff), which uses the dial-up access (PPP). I tried on windows XP and it works like a charm. I'll send unicast and broadcast UPD packets. If I repeat that on Windows 7, I can send only the data of unicast, broadcast packets seems to be lost somewhere, I tried to use the Microsoft network monitor, and I can see that broadcast packets are received on my PPP connection. But after that, they are gone. Somewhere in the kernel. I don't really understand why. I've disabled the firewall, antivirus, motor base, tried to open a session of abandoned filtering packed in the Windows Filtering Platform, clean the WIN7 machine I tried all without success.
Here is an example of a packet received on the interface, but there most recent scope of my application:
No. Time Source Destination Protocol Length Info 1 13:20:56.093380000 192.168.1.50 192.168.1.255 UDP 49 Source port: x11 Destination port: x11 Frame 1: 49 bytes on wire (392 bits), 49 bytes captured (392 bits) Encapsulation type: Ethernet (1) Arrival Time: May 7, 2014 13:20:56.093380000 Central Europe Daylight Time [Time shift for this packet: 0.000000000 seconds] Epoch Time: 1399461656.093380000 seconds [Time delta from previous captured frame: 0.000000000 seconds] [Time delta from previous displayed frame: 0.000000000 seconds] [Time since reference or first frame: 0.000000000 seconds] Frame Number: 1 Frame Length: 49 bytes (392 bits) Capture Length: 49 bytes (392 bits) [Frame is marked: False] [Frame is ignored: False] [Protocols in frame: eth:ip:udp:data:vssmonitoring] [Coloring Rule Name: UDP] [Coloring Rule String: udp] Ethernet II, Src: ae:4e:20:00:01:00 (ae:4e:20:00:01:00), Dst: Xerox_00:00:00 (01:00:01:00:00:00) Destination: Xerox_00:00:00 (01:00:01:00:00:00) Address: Xerox_00:00:00 (01:00:01:00:00:00) .... ..0. .... .... .... .... = LG bit: Globally unique address (factory default) .... ...1 .... .... .... .... = IG bit: Group address (multicast/broadcast) Source: ae:4e:20:00:01:00 (ae:4e:20:00:01:00) Address: ae:4e:20:00:01:00 (ae:4e:20:00:01:00) .... ..1. .... .... .... .... = LG bit: Locally administered address (this is NOT the factory default) .... ...0 .... .... .... .... = IG bit: Individual address (unicast) Type: IP (0x0800) Internet Protocol Version 4, Src: 192.168.1.50 (192.168.1.50), Dst: 192.168.1.255 (192.168.1.255) Version: 4 Header length: 20 bytes Differentiated Services Field: 0x00 (DSCP 0x00: Default; ECN: 0x00: Not-ECT (Not ECN-Capable Transport)) 0000 00.. = Differentiated Services Codepoint: Default (0x00) .... ..00 = Explicit Congestion Notification: Not-ECT (Not ECN-Capable Transport) (0x00) Total Length: 34 Identification: 0x0032 (50) Flags: 0x00 0... .... = Reserved bit: Not set .0.. .... = Don't fragment: Not set ..0. .... = More fragments: Not set Fragment offset: 0 Time to live: 126 Protocol: UDP (17) Header checksum: 0xb817 [correct] [Good: True] [Bad: False] Source: 192.168.1.50 (192.168.1.50) Destination: 192.168.1.255 (192.168.1.255) [Source GeoIP: Unknown] [Destination GeoIP: Unknown] User Datagram Protocol, Src Port: x11 (6001), Dst Port: x11 (6001) Source port: x11 (6001) Destination port: x11 (6001) Length: 14 Checksum: 0xafd1 [validation disabled] [Good Checksum: False] [Bad Checksum: False] Data (6 bytes) 0000 34 34 34 34 34 34 444444 Data: 343434343434 [Length: 6] VSS-Monitoring ethernet trailer, Source Port: 127 Src Port: 127
I'm out of my ideas, if anyone could help with any idea, please do. I don't know if this possibility is removed on win7 or not.
Hello
I suggest you to report your query in the TechNet forums to improve assistance in this regard.
http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro
Hope this information helps.
-
I learned so much from NETPROs and wanted to give back. In January, I started a website where I will post nuggets.
Here is my second... I hope someone is able to learn!
http://www.my80211.com/Cisco-Labs/2009/3/23/Cisco-AP-group-nugget.html
Thanks, it was very interesting. I knew about the AP groups, but maily broadcasting different SSID on specific access points, not to divide the net - it will be very useful in the future.
One question though, in a multi-controleur environment, I can just add the APs for the group, which are connected to the real controller. When the AP joins another controller (for example, a controller is offline) the APs will be in the default group on this controller (I think). How can I handle this differently?
-
WCS 7.0.164.0, 'Name of the AP group' mandatory
Just upgraded 5.2.130.0 to 7.0.164.0 WCS.
I'm in one of my new AP set up and now I can not even change his name because I am asked that the AP group name attribute is mandatory, when I press save:
___________________________ ERRORS ____________________________
Name of the Group of the AP: this attribute is MANDATORY. Please specify.
Make the necessary corrections, and then try again
So my question is, what function has the attribute of name of AP group?
Can I create a single general group of AP and set all AP to use?
Or do I make groups based on location or something else?
We have about 70 AP (1010,1130 and 1140) spread over 9 locations.
So my question is, what function has the attribute of name of AP group?
The AP group allows you to assign SSID and interfaces for the SSIDS to specific groups of APs
Can I create a single general group of AP and set all AP to use?
Yes
Or do I make groups based on location or something else?
If your happy with your current set up, why bother? We use specific to certain areas groups AP to limit the SSID of the Department.
I didn't realize it was now mandatory, the top of my head, I guess the intent is to stop all your SSID broadcast without worrying, as soon as you plug in a new light AP.
I hope this helps.
Chris
-
Trunk group and hunt inter-classes CUCM
Hello
I think I have some notion about what I have to do to get what I want to do, but it's always a good idea to get your expert advise to validate my plan.
I have two clusters of CUCM 10.5 standalone. We have VPN connectivity between these sites. Site A has a group with call of broadcast distribution. If nobody takes the call, he goes to voicemail. Now my management wants to add an extension of Site B in this group of hunting, there will be a distribution more call coverage or load. My thought is to create ICT between the two groups and add the extension of site B in the hunting group. Is there another better way? Do I have to create a trunk of ICT? I need to make sure that the call goes to voicemail if no one picks up the call. Thank you for your help on this.
~ Khanal
No, when you go to the Group of curves, you will notice the only things that you can add is a real number of directory. If the requirement is ring let simultaneously or circular between local cluster DN then build a ling group for it and then the backup is another cluster DN, DN build with single number reach destination pointing to the other cluster and then build the second group of line with this unique name. In your list of hunting point to two groups of line.
-
AP1231G SSID broadcasts do not [config posted]
I recently bought a set of access points AP1231G that have been pre-configured as root and nonroot bridges. Initially, I couldn't have a SSID will be displayed, thinking that I may have missed something that has been preconfigured I wiped the config and started from scratch. I went through several guides configuration to enable WPA with open authentication, but have had no success with the SSID is broadcast, and still less connecting to the AP.
Any help is greatly appreciated. Config below:
version 12.3
no service button
horodateurs service debug datetime msec
Log service timestamps datetime msec
encryption password service
!
host ap name
!
enable secret 5 $1$ lgoW$ zk7dfGkGLlZiOQuRFsxfV.
!
IP subnet zero
!
!
No aaa new-model
dot11 syslog
!
dot11 ssid MW2
open authentication
authentication wpa key management
Comments-mode
WPA - psk ascii 7 02050D4808090C285F4D06
!
!
!
username password Cisco 7 02250D 480809
!
Bridge IRB
!
!
interface Dot11Radio0
no ip address
no ip route cache
!
encryption ciphers aes - ccm mode
!
SSID MW2
!
base speed - 1.0 2.0 basic basic-5, 5 6.0 9.0 basic-11, 0 12.0 18.0 24.0 36.0 48.0 54.0
root of station-role
Bridge-Group 1
Bridge-group subscriber-loop-control 1
Bridge-Group 1 block-unknown-source
No source of bridge-Group 1-learning
unicast bridge-Group 1-floods
Bridge-Group 1 covering-disabled people
!
interface FastEthernet0
no ip address
no ip route cache
automatic duplex
automatic speed
Bridge-Group 1
No source of bridge-Group 1-learning
Bridge-Group 1 covering-disabled people
!
interface BVI1
IP 10.81.220.5 255.255.255.0
no ip route cache
!
IP http server
no ip http secure server
IP http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
!
output of the TFTP server
1 channel ip bridge
!
!
!
Line con 0
line vty 0 4
local connection
!
endthe antennas are connected?
Concerning
Surendra
-
Mappings of dynamic interface of SSID in the AP groups
Hello, I have a few questions about the mapping of the SSID to the interfaces within the AP groups. My controller runs 7.4.110 and has about 150 APs configured on the controller.
5508 pair UNIQUE for all APs authentication mode
50 are on the same campus as a controller. (APs in Local Mode)
100 are 40 other WAN sites. (APs to FlexConnect Central, site based authentication DHCP)
3 SSID broadcast to all sites
Corp - 802. 1 x
Warehouse - Auth WPA2-PSK-Mac
Reviews - wide opening with a Cs & Ts that you accept very similar to a hotel
Controller interfaces
Management interface
The warehouse - dynamic interface
Customer interface - dynamic
I have set up groups of AP for each remote location. My question is this:
For these places distant in the AP group configuration, should I maps all the SSID to the management interface, or I should map it to the dynamic interface? I.e. to Corp.--> Management, warehouse--> warehouse, guest--> comments.
For local access points, I do the SSID mapping for each interface, but I don't know that it's important for my remotes.
Help is greatly appreciated.
For your remote offices FlexConnect APs.
If WLAN is configured for local switching, then users will get IP of the interface that you corresponding in the mapping section vlan in the AP configuration. (interface by default yield under general WLAN or the AP group WLAN configuration section is not a problem)
If WLAN is configured for central switching, then you must assign a correct dynamic interface under the WLAN-> General section or AP group WLAN configuration.
Below material Ciscolive will give you good overview of all the available option & design guide.
BRKEWN-2016 Branch Office Architecture wireless
HTH
Rasika
Pls note all useful responses *.
-
New Cisco Aironet 1602i is not broadcasting the SSID I place
New Cisco Aironet 1602i is not broadcasting the SSID I place
SSID I set up is not broadcasting, so I don't see the wireless network to choose and connect. On my laptop if I choose specify the name of the SSID then I am able to connect to the wireless network. I have only 1 Configuration SSID on the access point. Anyone know how to update the configuration for the SSID is broadcast?
The green light on the AP flashes and turns off about 3 seconds; is this normal or should it stays on all the time?
Current configuration: 1842 bytes
!
version 15.2
no service button
horodateurs service debug datetime msec
Log service timestamps datetime msec
encryption password service
!
host ap name
!
!
Pulse 9 logging console
enable secret 5 $1$ rrlE$ msWqu8CGY/tpDkgRAAAIe /.
!
No aaa new-model
no ip Routing
no ip cef
!
!
!
dot11 syslog
!
dot11 ssid Mi Casa
open authentication
authentication-key wpa version2 management
WPA - psk ascii 7 142017070F0C787B7579
!
!
Crypto pki token removal timeout default 0
!
!
username Cisco privilege 15 password 7 112A1016141D
!
!
Bridge IRB
!
!
!
interface Dot11Radio0
no ip address
no ip route cache
!
encryption algorithms aes - ccm tkip encryption mode
!
SSID Mi Casa
!
gain of antenna 0
STBC
beamform ofdm
root of station-role
Bridge-Group 1
Bridge-group subscriber-loop-control 1
Bridge-Group 1 covering-disabled people
Bridge-Group 1 block-unknown-source
No source of bridge-Group 1-learning
unicast bridge-Group 1-floods
!
interface Dot11Radio1
no ip address
no ip route cache
!
encryption algorithms aes - ccm tkip encryption mode
!
SSID Mi Casa
!
gain of antenna 0
DFS block 3 Strip
STBC
beamform ofdm
channel SFR
root of station-role
Bridge-Group 1
Bridge-group subscriber-loop-control 1
Bridge-Group 1 covering-disabled people
Bridge-Group 1 block-unknown-source
No source of bridge-Group 1-learning
unicast bridge-Group 1-floods
!
interface GigabitEthernet0
no ip address
no ip route cache
automatic duplex
automatic speed
Bridge-Group 1
Bridge-Group 1 covering-disabled people
No source of bridge-Group 1-learning
!
interface BVI1
IP 192.168.10.200 255.255.255.0
no ip route cache
!
by default-gateway IP 192.168.10.1
IP forward-Protocol ND
IP http server
no ip http secure server
IP http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
!
1 channel ip bridge
!
!
!
Line con 0
line vty 0 4
local connection
transport of entry all
!
end
Hi you must guest mode config on the ssid... Read this bud
https://supportforums.Cisco.com/docs/doc-5442
Sent by Cisco Support technique iPhone App
Maybe you are looking for
-
How to find my iPhone 6 with a PC
-
Satellite L650 - 12 p - alternative driver for stereo mix
Hello I wonder if someone could help me. I have just purchsed this beautiful laptop toshiba which I'm genrally very satisfied but just one thing, I want to see what is missing and it is a function of stereo mix because I want to play music through my
-
Satellite L650 does not start sometimes the Power button
Sometimes when I press the button works / starting the fan of laptop and the laptop does not start.However when I press once again lights up.This does not depend on how long you keep holding the power button so that it starts.Anyone facing this probl
-
Loops through Excel spreadsheets
Hello I tried to loop through spreadsheets and Excel doc by increasing the grip of the worksheet. But unfortunately, that doesn't seem to be possible and I got an error. ExcelRpt_SetWorksheetAttribute(rawDataWorkSheetHandle,ER_WS_ATTR_NAME,"Analysis
-
Photosmart c7280 printer all in one
I recently bought a HP Pavilion 17 laptop. I have an all in one printer c 7280. I downloaded the drivers for windows 8.1 and I actually had a test print. I tried to install the printer and it tells me that it won't work with windows 8.1. Help p