Broadcom/qlogic npar distributed and strategy MPIO on Windows 2012R2

Similar Questions

• 6 ESXi and broadcom/qlogic 57800 errors in vmkernel.log

  The construction of a new host for ESXi 6. With the help of Dell custom ISO and then put to date with the latest patch. Have card 57800 2x10GB and broadcom 2x1GB (now qlogic). Firmware is the last 7.12.whatever and driver in vmware also seems to be later.

  In my vmkernel.log, I see the following messages every 2 minutes

  (2015 06-24 T 17: 08:47.788Z cpu0:33368)<6>host11: fip: host11: FIP VLAN ID no. Retry discovery VLAN.
  (2015 06-24 T 17: 08:47.788Z cpu0:33368)<6>host11: fip: fcoe_ctlr_vlan_request() is
  (2015 06-24 T 17: 08:49.790Z cpu31:33363)<6>host11: fip: host11: FIP VLAN ID no. Retry discovery VLAN.
  (2015 06-24 T 17: 08:49.790Z cpu31:33363)<6>host11: fip: fcoe_ctlr_vlan_request() is

  I found this article:

  http: //kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2120523

  but do not know how this applies.

  A 10gig links is used and also features offline in the vCenter. The other is showing that the unknown (it is not connected). I do not use FCoE and another r.620 with the old firmware but sam card and ESXi does not FCoE adapters.

  It is a bug? Is there somehow circumvents these garbage problem of FCoE filling the newspaper? Anyone see this before?

  The problem has been resolved. It is caused by the installed by the broadcom/qlogic driver startup script.

  As long as you do not use FCoE, you can remedy by you connecting to your ESXi host and running orders following, then reboot:

  software esxcli vib remove scsi - n-bnx2fc

  CD /etc/rc.local.d/

  RM 99bnx2fc.sh

  esxcli fcoe nic disable - n = vmnic0

  esxcli fcoe nic disable - n = vmnic1

  Depending on your configuration, adjust vmnic # according to your needs. I 2x10g and 2x1gig on my card but only had to do this on the ports 2x10g (vmnic0 and 1)

  If you try to disable the driver - instead of removing - and then remove the .sh file .sh file gets restored the next time you start to really remove the vib.

  Watch for patches that can reinstall the driver. This change can be found in the notes of the bnx2fc driver version. From 1.710.70.v version [50,55].2, this "feature" will be present.

  Dell helped me to find the solution for now, but there is at least another guy who stumbled upon this problem and posted the solution: www.davisphotoworks.com/.../broadcom-bcm57810-fcoe-and-esxi

• Create, distribute and receive responses on a "" form PDF

  Hello

  I apologize if it goes somewhere else, but I couldn't find a complete match to my question.  I am creating a form in Acrobat X, which can be sent on a Web site, downloaded up to 2000 people, filled and sent to me.  I recognize that there may be a better way to do this via some kind of direct web interface, but I am not able to do.  I want to 'collect responses' instead of printing each form and hand - enter the answers (the current method).  The people filling out the form will have probably some variation of drive.  I tried the form "distribute", and then he posted on an internal shared drive to test, but no one was able to modify the form except the typewriter tool.  (Strangely, I can actually fill out myself and collect my answers).  Can someone advise on what Miss me?  Thank you much in advance.

  Grant

  According to me, the Adobe technical support person's wrong about this, but I'm tired of working for Adobe to inform users that their frequent misinformation given said licening agreement from Adobe. This isn't stabbed you, so please do not be offended.

  The problem using the distribution process is that it will configure the form to submit the whole PDF via e-mail, oppose simply form data, even if you have configured the form to only submit the form data. You can set up a form for presenting the data in the form, but you cannot then use the distribution process. To submit form data only, create a button, give a mouse action upward to "Submit a form" and select FDF or XFDF format 'export '. Use a type mailto URL to specify the e-mail address of the recipient, making sure to keep all lowercase and no space. You can then compile the FDF (or XFDF) files from users, as explained above.

  Issues with email, this Bill mentioned, if it does not work for a user, they will have the option to save the file on their system and by manually attaching it to an e-mail. A more reliable approach is to submit to a web server, but then you must have a server script that processes applications. This requires an expertise, but it is much more reliable than e-mail and can be easily secured, unlike the email.

• Are the installation DVD of Windows Vista Enterprise and installation DVD of Windows Vista other than company completely different?

  Installation DVD of Windows Vista business and Windows Vista DVD installation, other than the company

  Are the installation DVD of Windows Vista Enterprise and installation DVD of Windows Vista other than company completely different? If so, how are they different?

  Hello

  This edition targets the enterprise of the market segment: it includes a superset of the Vista Business edition. Additional features include support for packets from the Interface user multilingual (MUI), BitLocker Drive Encryption, and UNIX application-support. Not available through retail or OEM, this edition channel sale will get distributed through Microsoft Software Assurance (SA). Since Vista Enterprise classes as a benefit of Microsoft Software Assurance, it includes several benefits HIS only, including a license allowing the execution of up to four virtual machines running a mixture of editions of Vista and the versions [13], access to Virtual PC Express and activation via the VLK. [14] Vista Enterprise supports up to two physical processors. [7] 64-bit Enterprise supports 128 GB of RAM

  Windows Vista Enterprise made salient

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Vista-Enterprise-highlights

  Compare Windows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/products/compare

• FF31: When I only have a tab open, even empty and close the tab window closes.

  FF31: When I only have a tab open, even empty and close the tab window closes.

  Type of topic: config in the address bar and press enter.
  Accept the warning.

  browser.tabs.closeWindowWithLastTab

  Double click to switch to false and then restart Firefox.

  Now, if you close the last tab of that window (or Firefox) does not close, but a new tab will be there.

• How is it, I'm starting my MacBook pro and there is no window to enter my password?

  How is it, I'm starting my MacBook pro and there is no window to enter my password?

  Most likely because you have configured automatic log in users and groups.

• Despite instructions from the help to get Firefox to show my windows and tabs from last time, when I close Firefox and reopen it, my windows and tabs are not there. What can I do?

  Whenever I close Firefox (when I'm leaving for a few days, or when the office closes from one day to the next day for some reason toher) and reopen it, the tabs that I got at the last session (usually calendar Google and Facebook) not open automatically. Google gmail tab is there - and I am sure that I always have to login.
  The indications 'Aid' Firefox says (1) close by clicking the Firefox button at the top of the window, then clicking on "exit". To open, click Firefox at the top, click on 'Options', select 'Général' and select ' show my windows and tabs from last time. " The option 'Show my windows etc.' was already there, but I clicked OK, then closed according to the instructions and open - Firefox to not see any tabs and windows but Google gmail.

  Previous Session Restore appears only on the homepage by default - Subject: House - not on the old Firefox Google start page - http://www.google.com/firefox or any other user defined homepage.

  There is also a menu item in the history of previous Session Restore, which does the same thing as on the subject: homepage.

• Satellite X 200 and the drivers of Windows XP Home edition

  Hello

  This is my first post in the forum of Toshiba.
  I would like to ask if someone has successfully installed the windows xp operating system in the 200 X-
  with the support of pilots complete ex:
  NVIDIA graphics drivers all other question yellow marks appears in Device Manager.
  If Yes can post a link to download drivers Toshiba download driver page doesnâ because? t support NVIDIA graphics drivers and other drivers for Windows XP Home edition.

  Thank you very much
  Sorry for my bad English.

  Take a look at the post Johnny s!

• RoboForm does not work with your new browser. It is very fustrating and works only with Windows Explorer. I need to reinstall the old FIREFOX program?

  RoboForm does not work with your new browser. It is very fustrating and works only with Windows Explorer. I need to reinstall the old FIREFOX program?

  RoboForm has already released a version with support for the latest version of Firefox. See http://www.roboform.com/support/news. Try upgrading to the latest version of Roboform.

• Why he closed my tab and opens in another window. It bothers me a lot.

  Why it closes my tab and opens it in other window. It to me very much disturbs.  I touch nothing. It occurs on 20 times a day.
  

  This has happened

  Each time Firefox opened

  Is in May.

  A very slight downward movement when clicking on a tab will cause the tab 'tear-off' and open in another window. You can drag the tab to the original window tab bar.

  To stop this behavior, you can install this add-on:
  https://addons.Mozilla.org/en-us/Firefox/addon/12276

  Other issues: to correct the problems of security/stability

  Install/update Adobe Flash Player for Firefox: your version 10.0 r32; current version 10.0 r45
  See: Flash update
  -use Firefox to download and SAVE to your hard drive (save to the desktop for easy access)
  -the release of Firefox (file > exit)
  -Double-click the Adobe Flash Installer, you have just downloaded to install Adobe Flash
  -Make sure that Firefox is completely closed (Ctrl + Alt + Delete, choose Task Manager, click the processes tab, if "firefox.exe" is on the list, made a "firefox.exe" right-click and choose end process, close the Task Manager window)
  -When Flash is installed, start Firefox and test the installation of Flash here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507 & sliceId = 1

  • NOTE: under Vista and Windows 7 you may need to run the installer of plugin as an administrator by starting the installation program via the context menu if you do not get a UAC ask permission to continue (that is, nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
  • NOTE for IE: Firefox and most other browsers use a Plugin. IE uses ActiveX of Flash version. To install/update IE ActiveX Adobe Flash Player, same instructions as above, except use IE to download the ActiveX Flash Setup.

• Satellite L775-19th Keybord does not correctly and unrecognized HDMI - 10 Windows

  After the upgrade of Windows 10 regrettable, some keys on my keyboard (SPACEBAR, number one, fn keys) no longer work and I can't go to my external screen.
  Cannot find any appropriate windows 10 drivers for my keyboard or nvidia.
  Any ideas how I might switch to the external display without the keys - could be some time before that Toshiba makes available the relevant drivers but I need to use an external display badly (I now use an external keyboard, but it doesn't have the same keys as my laptop keyboard)

  With regard to the problem of keyboard:
  I recommend you update Windows 10 and to check new updates of MS that are not installed.
  I read that some MS updates would solve problems of possible keyboard.

  Here is a thread about keyboard and question 10 of Windows:
  https://Forum.Toshiba.EU/showthread.php?84287

  With regard to the nVidia Driver:
  Well, you might find some compatible drivers on the page of the driver nVidia... This could be one of the possible solutions... Another idea: let search system graphics driver to be automatically updated via Device Manager...

• Qosmio G30 display flickering and cannot connect to Windows

  I have to press F5 to make the visible display each time that I boot. I thought that it was a software related issue and I tried to format the drive with recovery CD original. However, the screen keeps flickering of the stage of the BIOS.
  Now, it's even worse. The screen flashes when the turning on and I cannot Ouvrezunesession Windows MCE after formatted HARD drive.

  After reading the FAQ and related articles, I suspect that it was a problem of graphics (hardware).
  My graphics card is NVidia Go7600. Is this true, and it's a must to change the hardware (graphics card)?

  Appreciate your advice before contacting the local support team.

  Thank you very much!

  Hello!

  That s a strange question. Do you have the same problems on an external monitor?

  If a display is flashing, the screen itself is faulty, the FL tube is the cause of the error. I think that is the best, when an ASP (authorized service provider) checks your Qosmio G30.
  Here you can find one:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an ASP.

  Good luck

  Good bye

• How can I remove my OS and replace it with windows on my macbook pro 10

  How can I remove my OS and replace it with windows 10 on my macbook pro?

  Primarily, I use my ipad pro for all my work and I want a windows dedicated for other work machine.

  What os? you want to replace the OS X 100% with windows with no return back?

  or you want to replace a version of windows in bootcamp with windows 10?

  your macbook must support windows 10 in any case, you can read here more use 10 Windows on your Mac with Boot Camp - Apple Support

• Mixed language in the stop/restart/logout dialog and in the login window

  Since I upgraded to El Capitan my shutdown/restart/logout dialog and in the login window appears in 2 different languages. My mother tongue is Italian, but I have a message in English.

  My default language is System Preferences is Italian and that is not installed.

  Try I'have:

  In the menu bar, select

   ▹ System Preferences... ▹ Language & region

  Deselect each language unwanted from the list and click OK. Then select your region in the menu of the region.

  Close the preferences window. You may need to sign out and then sign back in before the change takes effect.

  If there is no change, reset the PRAM.

  But nothing!

  Can you help me please?

  Do you have other users accounts in your mac?

• I use 1023TX dm4, and I install the windows 8, it have problem ATI display driver

  I use 1023TX dm4, and I install the windows 8, there is an ATI driver problem, I have two screen, one intel, and one is ATI. but ati driver does not, I need to turn off, can you help me?

  Hi Tomiko094,
  
  More than likely HP won't to material support for W8 on any system purchased before October 1, 2011. Most of the W7 drivers will work W8.
  
  Have a look here http://goo.gl/hmPRB for a document official on the update of drivers and software
  
  This document here http://goo.gl/CO6uV provides information on the upgrade to Windows 8
  
  I hope this helps.