Broadcom USH in Dell E6400 drive problem

Similar Questions

• Where can I find a Driver Broadcom USH for an E6400 running WIN 7 x 64

  Where can I find a Driver Broadcom USH for an E6400 running WIN 7 x 64

  I found this Dell_ControlPoint-security - D_A15_R254254.exe

  Glad to see you to found and returned to share this information with the community.

  B Eddie

• Soundbar DELL AC511, driver problem

  The first installation of the sound AC511 bar, Windows recognizes the device correctly as Dell soundbar and I could hear him. but after the reboot, Windows recognizes the device as a USB speaker and I can't hear the sound of the it.

  It seems that Windows is unable to locate the right driver for AC511. I also tested device Windows 7,8,8.1 and after restart, the same problem arises. It is recognizing the USB speaker device. So, I deleted devmgmt.msc device and device reinstalled several times. but the problem remains. He always recognizes as speaker USB device and I can't hear the sound of the it.

  any solution to this problem?

  Thank you.

  I'm not sure I'm reading these messages correctly, but if the soundbar using an USB connection on the screen, it will not work unless you have a cord connecting the monitor to the computer. The provided monitor with a cord that connecst the monitor to the computer in order to perform the USB connections on the monitor function. Otherwise, they will not work. I have not yet tried, but I read about it. The USB cable end goes to the computer and the other end goes into the USB port upstream on the monitor.

• use or need driver broadcom ush for latitude e6500 running windows 7 Enterprise o/s

  I have a Latitude E6500. I've recently updated by the IT Department. with the o/s of Windows 7 Enterprise inst. Formerly, I was running on a Windows XP platform. After analysis of my state of the machine on the Web site updates of Dell, I conclude that it recommends 15 different updates. My main concern is the Dell recommended update checkpoint security. I got two separate recommendations. I also got a message on my computer the Broadcom USH driver is not found.

  I would like to know if I need to install the full control Point security update Dell_ControlPoint-security-D_A18_R269916 and also the DELL_CONTROLPOINT-SECURITY-M_A06_R204039 update

  Do I have to run both or just one of them.

  Also, do I really need to install the full driver package to access the driver for the Broadcom USH or can I select only this driver?

  If the full device driver package is installed will then need a security card to access my machine?

  Should I have the Broadcom USH driver at all - I use card air and DSL access?

  Where the hell are these drivers? I went to the Dell site and downloaded all the drivers available for win 7 64 bit, installed same 32-bit in frustration and found that the same driver is not available on the Dell site... for one or the other! I looked everywhere on the web and can not find this driver set (Control Point security update Dell_ControlPoint-security-D_A18_R269916 and also the update DELL_CONTROLPOINT-SECURITY-M_A06_R204039)... where is this driver package to? :)

• Need drivers for Dell Latitude E6520 "Broadcom USH" & "Mass storage controller" Windows 7 64 bit

  Need the drivers mentioned above.  I installed virtually every driver available in the download for the driver page Inc. Control Vault and cannot get the two driver mentioned.

  Any help would be appreciated

  See security for the Unified Security Hub Broadcom (USH - probably a biometric reader / print) for the device that best matches your hardware:

  www.Dell.com/.../Latitude-E6520

  The other "mass storage controller"... go to Device Manager, right click on the device in question, properties, Details tab, change the drop-down list of hardware IDS and give me the VEN. and DEV ID (do the same for the USH device above if the related driver does not work).

• Precision driver Broadcom USH M6600

  In my device under other Manager it says it is looking for a driver Broadcom USH, the Ethernet driver, and the driver for mass storage, but none is listed in the technical Online Driver of Dell the Support download page.

  Any help is appreciated - thanks

  I found the 64 bit Broadcomm unified security hub for my E6500 driver.  (Note his also for many other systems.)
  

  htttp:/FTP.us.Dell.com/control%20Point/

  DELL_CONTROLPOINT - CONNECTION_A11_R207458.exe 32-bit
  DELL_CONTROLPOINT - CONNECTION_A11_R207459.exe 64-bit

  USH, run as admin Vista SP2 compatibility

  

• Dell Inspiron 15R SE AMD video driver problems (7520)

  Hello

  Updated Windows Installer update drivers AMD GPU for me earlier. I think the problem is that it has installed the AMD site instead of graphics drivers switchable drivers that are compatible with my laptop (Inspiron 15R SE).

  All programs that use the AMD card crashes when I start the system, including the Catalyst Control Center and the switchable graphics program. I tried to get into windows to display advanced options, but windows stops responding when I open the menu (Gray screen for about a minute then it returns with the window closed).

  Dxdiag crashes if I start it, and if I try to run again he asks me if I want to run without Direct3D. If I press 'No', it crashes. If I accept, he let me in but does not detect the graphics card AMD.

  I tried to uninstall the drivers and re - download coupons Dell website, but the problem persists.

  I'm running an AMD Radeon HD m 7730 GPU and 4000 HD Intel integrated graphics.

  TL; DR: All programs set to use graphic crash dedicated. Drivers say they have updated, but the problem is still there. Cannot access driver rollback screen (windows crash).

  If you need more information, just ask. I run the Dell Diagnostics tool and he found nothing wrong, so it is a driver problem.

  Hello

  I followed the steps you posted. Uninstall driver AMD asked me to restart later, so I allowed him to. I was greeted with a BSOD whenever I started. I tried to boot my Dell driver recovery disk, but there is no drive detected. I finally decided I had to do a system restore.

  The good news is that the problem is resolved.

  Bad news is that I lost all my files. This time I am disabling the windows driver updates...

• Latitude E6500 and Broadcom USH

  I am trying to solve a problem of driver. I have an E6500 and after installing XP, patches, drivers and other, I find myself with a hardware device not found. It is listed in the Device Manager as '5880' and after some research, it seems to be the Broadcom USH CV for a fingerprint reader. I don't have a fingerprint reader. I extracted the drivers from another system and stressed assistant material there but not good effect. Anyone has a solution to this riddle?

  After talking with people from Dell, it was decided (because of other problems besides this one) to build a new image only for our laptop E series; We are currently making the E6400 and E6500, the E4200. When I built the image, I've included the drivers for the fingerprint reader. Is not ideal, but that market. Once the image is deployed and sysprep it made thing, I install all software downloaded from Dell, including security software associated with the fingerprint reader. Once it's the fringe of complete equipment, not more and everything works as advertised.

  Now, if someone could tell me how to remove during the installation of the "WiFi networks available" dialog box for the Intel wireless card, I'd be a really happy camper...

• Framework of biometric Latitude E6420 - Broadcom USH drivers windows

  Hi experts,

  Ask you to check this old_post

  http://en.community.Dell.com/support-forums/laptop/f/3518/p/19485564/20278666.aspx#20278666

  I have the same problem, even after you have reinstalled the drivers in the order as suggested by Dell.

  

  I installed "CV_WBF_Setup_Y2GT8_64bit_ZPE.exe".
  [1] double-click on the .exe with option of compatibility in windows 7 and the checkbox on the value

  run as administrator (best option).
  [2] click on ok for a Floder pop-up.
  [3] now install you the driver (this will clear the yellow color material highlighted in)

  Device Manager)
  [4] reBOOT and then install the Firmware (set to the same level provided firmware along

  with driver).
  [5] reboot-> connection (with password :-|) and verify biometric devices in control pannel.)
  you try to check biometric devices in Control Panel and lettering.

  you might get the ERROR below:
  "configuration of broadcom ush host components BrcmFMA.exe - by-side is incorrect.
  Details correct as below:
  Activation context generation failed for "C:\Program Corporation\Broadcom Broadcom

  USH Host Components\BrcmFMA.exe. Dependent assembly

  Microsoft.VC90.MFC, processorArchitecture is "amd64", publicKeyToken = "1fc8b3b9a1e18e3b", type is "wi

  N32', version = '9.0.21022.8' not found. Please use sxstrace.exe for detailed

  diagnosis.

  solution is to install Microsoft Visual C++ 2008 SP1 Redistributable Package (x 64).

  now the problem is that the finger print data are saving :(
  I continued to ask dell support team.
  the big joke, it's what they call it as OFF FIELD.
  :(

  Crazy technical support

  Hi guys,.

  Please see the link below.

  http://en.community.Dell.com/support-forums/laptop/f/3518/p/19485564/20338375.aspx#20338375

  Answer posted by "" P3Sal " "

  OK Dell has finally released drivers for Windows 8.  Its a few steps so here's how I worked on all our machines.

  Uninstall the Dell Data Protection if you have it installed.

  Download the firmware and driver here:

  Driver: www.dell.com/.../latitude-e6420

  Firmware: www.dell.com/.../latitude-e6420

  Extract the firmware and install it.  You must run it in high command line and be sure to select the x 64 Installer.

  Reset

  Once installed, you can install the driver from Dell ControlVault

  Restart and you should now see the biometric device.  The software will be Broadcom now instead of Dell and you can save your fingerprints.

  Kind regards

  Ralu

• Broadcom USH on 64-bit Windows 8

  I'm running Windows 8 64 bit on a Dell Latitude E6430. In the Device Manager in the other devices section, it lists Broadcom USH w/blow sensor and there is no driver installed for it. I can't find drivers or Dell ControlPoint for 64-bit Windows 8 or downloads under Security on the Web site of support for 64-bit Windows 8. Does anyone know when something might be released or have a link to download what Miss me?

  It works for me. Windows 8 operating system

  Driver Dell ControlVault WBF is one which needs to be downloaded.

  Good luck

• How can I find that a dell E6400 laptop integrated windows7 address Bluetooth radio?

  I just upgraded to a computer laptop dell E6400 with built-in wireless Bluetooth. How to find Bluetooth built in Bluetooth radio address?

  On my previous dell Latitude D620 running WindowsXP the Bluetooth radio and address were listed in Device Manager. Built in Bluetooth radio on the laptop computer dell E6400 under windows7 is not listed in Device Manager. The wireless switch on the side of the laptop is in the position you and the light of bluetooth radio is a brilliant blue. I need the address to the address to the Bluetooth LabVIEW VI entry create listener. An external USB Bluetooth dongle normally lists in Device Manager.

  Thank you!

  My partner has hit it on the head. The material seems to be there, but maybe there is no driver; whaalaa, loaded the driver and there is the mini bluetooth card listed with address. Apparently the bluetooth driver has not loaded with the load of the company.

• Installation of WINDOWS HOME SERVER on a server that I just built. Driver problems.

  I'll use my old office of 3 years of Dell (Inspiron 531) as a server. I will be installing WINDOWS HOME SERVER software on this subject. The vehicle currently has Vista Home Premium on it. Someone I know said I could have driver problems. Is this true? If it is that drivers enough to be responsible and how to see their loading? Chris Mah

  http://social.Microsoft.com/forums/en-us/category/WindowsHomeServer/

  Kindly repost your question in the above Windows Home Server Forums.

  Here is the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Dv7-1260us wireless driver problems

  Formatted and installed Windows Vista Ultimate 32 bit.  From all the drivers off http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=2093&lc=en&dlc=en&cc=us&lang=en&product=3860646 and so far all works great except for the wireless.  When I try and run the installation of the driver provided on this installation page is never ending and windows asks if I would try to reinstall again.

  I saw on another forum that this laptop has perhaps not an inside broadcom wireless adapter at all, maybe it has something to do with driver problems?

  Hello

  You can try to install the Atheros driver which is here.

• Reference Dell upgrade package cannot install the dell wifi driver

  Hello

  Since I reinstalled Window8 in my inspiron 3138, the laptop can not install the upgrade package from dell"and can not install my wifi driver.

  I can not install the following drivers and the laptop cannot detect WiFi at all.

  1704 Wirelss Dell Wifi driver (Network_driver_342TP_WN32_7.35.333.0_A01)

  Driver for the mod aircraft Dell (Network_driver_PX8MM_WN64_1.0.0_A00) switching

  Do you know how to solve this problem?

  Best,

  Lucy

  Please let me know which operating system you currently have on the computer. It's 10 or windows 8.1. Because the version you are trying to install is for windows 10. Also please go to Device Manager and confirm the card this wireless network adapter option.

• Windows 7 reload in infinite loop: Dell E6400 laptop

  Laptop Dell E6400 frozen at windows startup. At the command prompt and started Windows 7 32-bit reinstall from CDs. Reinstall has not completed, now it's this loop: starts windows - "the installation program starts services", then error message "computer... met an unexpected error... cannot continue... click OK to... to restart the installation.» I downloaded Win7 disk image - it is on the USB. When restarting, press F8 and choose Safe mode with command prompt, but it never gives me a command prompt, or will it take the USB. I also tried 'disable automatic restart in the event of system failure' as suggested in another post, but nothing never happens to me to where I can run Win7 reload. Please help me out of this infinite loop.

  Hello

  I can imagine the downside of not being able to make it work as it should, and I'll be happy to answer your query. I appreciate the efforts made in the patches that you tried.

  This could be due to a hardware failure as well.

  From now on, I would ask to refer to the suggestions in the thread below link and check the status.

  Repair Windows 7 boot loop

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.