Broadcom USH on 64-bit Windows 8

Similar Questions

• Need drivers for Dell Latitude E6520 "Broadcom USH" & "Mass storage controller" Windows 7 64 bit

  Need the drivers mentioned above.  I installed virtually every driver available in the download for the driver page Inc. Control Vault and cannot get the two driver mentioned.

  Any help would be appreciated

  See security for the Unified Security Hub Broadcom (USH - probably a biometric reader / print) for the device that best matches your hardware:

  www.Dell.com/.../Latitude-E6520

  The other "mass storage controller"... go to Device Manager, right click on the device in question, properties, Details tab, change the drop-down list of hardware IDS and give me the VEN. and DEV ID (do the same for the USH device above if the related driver does not work).

• use or need driver broadcom ush for latitude e6500 running windows 7 Enterprise o/s

  I have a Latitude E6500. I've recently updated by the IT Department. with the o/s of Windows 7 Enterprise inst. Formerly, I was running on a Windows XP platform. After analysis of my state of the machine on the Web site updates of Dell, I conclude that it recommends 15 different updates. My main concern is the Dell recommended update checkpoint security. I got two separate recommendations. I also got a message on my computer the Broadcom USH driver is not found.

  I would like to know if I need to install the full control Point security update Dell_ControlPoint-security-D_A18_R269916 and also the DELL_CONTROLPOINT-SECURITY-M_A06_R204039 update

  Do I have to run both or just one of them.

  Also, do I really need to install the full driver package to access the driver for the Broadcom USH or can I select only this driver?

  If the full device driver package is installed will then need a security card to access my machine?

  Should I have the Broadcom USH driver at all - I use card air and DSL access?

  Where the hell are these drivers? I went to the Dell site and downloaded all the drivers available for win 7 64 bit, installed same 32-bit in frustration and found that the same driver is not available on the Dell site... for one or the other! I looked everywhere on the web and can not find this driver set (Control Point security update Dell_ControlPoint-security-D_A18_R269916 and also the update DELL_CONTROLPOINT-SECURITY-M_A06_R204039)... where is this driver package to? :)

• Framework of biometric Latitude E6420 - Broadcom USH drivers windows

  Hi experts,

  Ask you to check this old_post

  http://en.community.Dell.com/support-forums/laptop/f/3518/p/19485564/20278666.aspx#20278666

  I have the same problem, even after you have reinstalled the drivers in the order as suggested by Dell.

  

  I installed "CV_WBF_Setup_Y2GT8_64bit_ZPE.exe".
  [1] double-click on the .exe with option of compatibility in windows 7 and the checkbox on the value

  run as administrator (best option).
  [2] click on ok for a Floder pop-up.
  [3] now install you the driver (this will clear the yellow color material highlighted in)

  Device Manager)
  [4] reBOOT and then install the Firmware (set to the same level provided firmware along

  with driver).
  [5] reboot-> connection (with password :-|) and verify biometric devices in control pannel.)
  you try to check biometric devices in Control Panel and lettering.

  you might get the ERROR below:
  "configuration of broadcom ush host components BrcmFMA.exe - by-side is incorrect.
  Details correct as below:
  Activation context generation failed for "C:\Program Corporation\Broadcom Broadcom

  USH Host Components\BrcmFMA.exe. Dependent assembly

  Microsoft.VC90.MFC, processorArchitecture is "amd64", publicKeyToken = "1fc8b3b9a1e18e3b", type is "wi

  N32', version = '9.0.21022.8' not found. Please use sxstrace.exe for detailed

  diagnosis.

  solution is to install Microsoft Visual C++ 2008 SP1 Redistributable Package (x 64).

  now the problem is that the finger print data are saving :(
  I continued to ask dell support team.
  the big joke, it's what they call it as OFF FIELD.
  :(

  Crazy technical support

  Hi guys,.

  Please see the link below.

  http://en.community.Dell.com/support-forums/laptop/f/3518/p/19485564/20338375.aspx#20338375

  Answer posted by "" P3Sal " "

  OK Dell has finally released drivers for Windows 8.  Its a few steps so here's how I worked on all our machines.

  Uninstall the Dell Data Protection if you have it installed.

  Download the firmware and driver here:

  Driver: www.dell.com/.../latitude-e6420

  Firmware: www.dell.com/.../latitude-e6420

  Extract the firmware and install it.  You must run it in high command line and be sure to select the x 64 Installer.

  Reset

  Once installed, you can install the driver from Dell ControlVault

  Restart and you should now see the biometric device.  The software will be Broadcom now instead of Dell and you can save your fingerprints.

  Kind regards

  Ralu

• Device drivers missing for storage of mass cont, sm bus cont, broadcom ush

  In the Manager of devices for my laptop, I have a yellow exclamation point indicating device drivers missing for Mass Storage Controller, controller SM Bus and Broadcom USH. I was not able to find a source or a solution.

  I use Win 7 on a Dell Latitude t6420 with Google Chrome installed.

  In the Manager of devices for my laptop, I have a yellow exclamation point indicating device drivers missing for Mass Storage Controller, controller SM Bus and Broadcom USH. I was not able to find a source or a solution.

  I use Win 7 on a Dell Latitude t6420 with Google Chrome installed.

  Have you TRIED same Dell?  They made your computer, they support the drivers for the hardware / equipment.

  Visit Support from Dell: drivers and downloads website and enter the serial number of your Dell Latitude E6420 and change the operating system to the correct (including the architecture 32-bit or 64-bit) and download appropriate drivers.

  You should get what you need under Windows 7.  Just be sure to install the card mother/mother/chipset drivers, network, communication, etc.  You should have a list of stuff you configured this system with.

• Precision driver Broadcom USH M6600

  In my device under other Manager it says it is looking for a driver Broadcom USH, the Ethernet driver, and the driver for mass storage, but none is listed in the technical Online Driver of Dell the Support download page.

  Any help is appreciated - thanks

  I found the 64 bit Broadcomm unified security hub for my E6500 driver.  (Note his also for many other systems.)
  

  htttp:/FTP.us.Dell.com/control%20Point/

  DELL_CONTROLPOINT - CONNECTION_A11_R207458.exe 32-bit
  DELL_CONTROLPOINT - CONNECTION_A11_R207459.exe 64-bit

  USH, run as admin Vista SP2 compatibility

  

• How can I disable the warning "this connection is not approved", which appears almost each time I try to go to a Web page via Firefox? I use 10 64-bit Windows.

  I just upgraded to 10 64-bit Windows. The version of Firefox that works now on this OS regularly displays a blocking window that told me that "this connection is not approved" when I try to connect to a third-party site. A screenshot of the window copy is attached. How to disable this warning? I can't continue to use Firefox if I can't find the 'off' switch, which so far has escaped me.

  Yes, this is the feature, and it is lit.

  How it works, is that ESET intercepts all your browser connections to filter the content. If it is an HTTP connection, it is transparent. For an HTTPS connection, ESET must present a certificate of 'false' for Firefox site so it can be the "man in the middle" and decipher and read the answer (otherwise, it's gibberish, of course).

  ESET is supposed to insert his signature certificate in both the Windows certificate store (used by IE and Chrome) separated from Firefox AND the browser certificate store accepts the false certificates. But it does not always work. In this case, you can import the certificate manually in Firefox. If all goes well, which has been covered in the manual, but otherwise it's basically along these lines:

  (1) search or save a copy of the ESET signature certificate (it is a file in DER format that usually has the .cer extension). Is your second screen shot what appears when you click View Certificate? Try this:

  • Click the Details tab, click the button "Copy to File. This will start the Export Wizard.
  • In the wizard, choose the DER format and save in a suitable location (for example, your Documents folder).

  (2) import the file into Firefox as follows:

  • In Firefox, open the Certificate Manager to:
    "3-bar" menu button (or tools) > Options > advanced > mini-onglet Certificates > "view certificates" button.
  • Click on mini - the References tab, then on the 'Import' button and find the DER file. Note: I suggest allowing the certificate for websites only.

  I have attached a few screenshots of reference sample.

• Setup iTunes won't download 32-bit windows 10

  Setup iTunes won't download 32-bit windows 10

  See this article and post back with some relevant information: writing an effective communities of Apple Support question

• Is there a way to possibly launch a 32-bit version of Firefox on my 64-bit Windows 8 platform to enable certain functions on a specific Web site?

  SVAR (The Swedish National Archive) requires a plugin, djVu for scanned documents viewing. When he always refused to work after installing djVu what turns my webreader should work with 32 - bit and my new pc comes with 64-bit Windows 8. Is there a way to move from 32-bit and 64-bit Firefox?

  And the longer answer, 20 Firefox for Windows of Mozilla.org is only 32-bit.

  The WOW64 part in your useragent in Firefox 20 shows that you have Firefox 32 bit on 64-bit Windows.

• Satellite L500 - 21dts & 8 64-bit Windows

  I changed my OS to 64-bit windows 8, all material defined by windows except chipset & blutooth (I set them once Windows 7, once of the latest model as L830). but the function key does not work do not (for wirekess/blutooth power).

  Are there drivers for L500-21dts for windows 8 64-bit or specific drivers for compatible models new?

  > Are there any drivers for L500-21dts for 64-bit windows 8...
  On http://eu.computers.toshiba-europe.com/innovation/jsp/checkWindows8Compatible.do?service=EU, you can check if your laptop is supported for Win8 OS.

  One more thing: your laptop is an Intel HM55 Express Chipset. It is interesting that Tecra A11 with PTSE0E part number has the same chipset, and it is supported for Win8 then you can try to use the chipset offered for this laptop Tecra driver.

• Palm TX 32 bit Windows 7 Pro of XP Update: use XP mode? Or Win 7?

  I'm really good at making fatal mistakes with technology and my Palm is too critical to risk, so I bought a portable 32-bit, Windows 7 pro and XP mode installed.

  I've scoured the forums, but all I can find are problems/solutions with 64 bit (which is what scares me in the first place, of course).

  First of all, I should install in XP mode?  Or install Win 7 on a 32-bit computer will go smoothly?

  Secondly, can I use my original disc with the 4.2 version of Palm Desktop?

  Finally, for my peace of mind, you kindly check my checklist of errors, omissions or dangerous areas.

  (1) synch the device from Palm desktop

  (2) backup on my SDCard with NVBackup

  (3) open the XP mode - or do not open XP mode as you recommend

  (4) install Palm desktop (disc or download that recommend)

  (5) enter the same username as on the device / xp computers

  (6) change in Organizer substitute Office

  (7) with the sync cable. Make tea. Be calm.

  (8) check data on handheld and the desktop to find errors.

  (9) when somewhat confident everything goes well, return led to synchronize except for stays of backup as handheld overrides desktop. (not sure why, but it's the default I guess.)

  Thank you

  Off the hook

  SUCCESS!

  Thank you all very much. I danced around the kitchen.

  I had a few problems, and that means a question.

  After installation I plugged the cable in and upward jumped a box "Installing the driver software" telling me "software device driver was not installed successfully. I thought it was over, and that's my question. What does that mean? Because the next thing that happened, thought I had nothing to lose but hope, I tried a synch, and incredibly, it worked. I made a small change in the calendar and it synchronized at the back of the unit.

  He also tells me there is a problem with the quick installation then took me to do nothing.

  In addition, in case it might help someone, disable UAC in Win7 is slightly different from that of Vista. Go to "edit your user account settings" and set the cursor to "Don't warn.  At this time, I went on the internet for security. And it's a little annoying, because after that you have to restart the computer. And when HotSync is done, you go back to the control panel and restart and then restart.

  WyreNut, I smiled when I saw your post.  I always assumes that the volunteers on the technology forums (which, in a just world, would be paid buckets of moolah for their help) are early and that you would be all Win8 (and the curse, I suppose). But I guess that help you here because if something works (such as Palm) why spend.

  I kudo has you all and would buy you champagne if I could.

  Confused, but less.

• HP Pavilion all 8 compatible 64-bit Windows developers?

  I already have 5 months 8 developers 64-bit Windows installed on my HP Pavilion a1585l. I upgraded to 2 GB of RAM 4 years ago. He works very well with different OS. The problem is that the original drivers are for older OS like Windows XP. So if I want to update a driver that it does not work because there is a compatibility issue. Is there someone who has experience with Windows 7 Ultimate 32 or 64-bit Windows 8 developers preview 32 or 64 bit on this machine?

  Respectfully,.

  Mr. Dutchie

  I found the driver for work. It is published before this post the most recent driver and he acknowledged the 6750M and what's weird, is... it is a driver OF HP's OFFICIAL! How could you say that there is NO driver for this model yet... ftp://ftp.HP.com/pub/SoftPaq/sp59001-59500/sp59407.exe
  
  Kind regards
  
  MaXi32

• 32-bit Windows 7 and error message shown on Satellite T series

  Assistance needed for this fake computer.

  I started to install 64-bit windows 7 then click on Cancel to halfway, after that I realized that maybe this might require too much RAM.
  Now get persistent error message (F3-F200-0002). What should I do? (need to explicit instructions as relatively inept)

  Hello
  If I understand correctly, you ' ve started to install windows 7 and then cancelled the installation. Now get persistent error message (F3-F200-0002). Just do a fresh install again.

• 64 bit window 8 drivers

  I need drivers for printer laser HP 1005 P. I have 8 64-bit windows. They said that they would have at the end of 2012. Help me.

  The only thing to do here is to wait, may be coming installation any day.

  I'm sorry.

  THX

• Windows 7 32-bit Windows Vista

  Hello everyone

  I have a Satellite A500 - 15M, with a Windows 7 32 bit running on which has been upgraded from Windows Vista 32 - bit by Upgrade DVD from Toshiba sent me in January.

  I need to have my Windows 7 64 bit instead of 32 bit. I searched the internet on it, and I discovered that I can't do that unless I have a new copy of Windows, but the only disks I have are the Windows Vista RECOVERY DVD and the DVD of Windows 7 upgrade.

  Is it possible to get a new copy of Windows Vista 64-bit of my restore DVD, and then upgrade to Windows 7? Or do I need a DVD of 64-Bit Windows?

  I really appreciate your cooperation.

  Kind regards
  ALA'

  Hello

  According to specification for laptop, your laptop comes with Vista 32 bit and 64-bit dual boot.
  If you have created recovery disks it will be interesting to know how many DVDs to disc you have.

  For example, on my Satellite A500-157 I have 4 DVD discs. In other words, I have a recovery disc for 32 and 64 bit Vista. When you start the first DVD, you will be asked which version you want to install.
  Please check if it works also with your recovery discs.

  If you have this option install Vista 64-bit on your laptop and use subsequently updated DVD and try to upgrade to Win7 64-bit.

  If please test and let me know if it works for you.
  Based on your response, we will seek the next solution for you.