Brocade showing WWPN fabA

Similar Questions

• Setting port channel between UCS - FI and MDS 9124 (Mode F)

  Dear team,

  We tried to create the channel of port between UCS FI and MDS 9124

  But the port channel do not take action in mode F on MDS 9124

  FI is in host FC end Mode

  We have allowed FC uplink on FI trunking

  We have activated NPIV on MDS

  We have activated the MDS trunk

  FI and MDS in default VSAN

  To check that we have changed the way FI FC channels mode and switch port became active, but in E mode

  When we enabled CF trunking of uplink on the port mode FI channels and FC Switching became active in mode TE

  but in both cases above, showflogi database shows WWPN of SAN alone does not have the any fi.

  How to achieve this?

  Have read that no need to change the mode switching mode of CF swicthing and keep FC Endhost way

  SO how to channel ports with mode F MDS and FI (Display Mode as NProxy)

  What is it has nothing to do with the MDS NX - OS version? (https://supportforums.cisco.com/thread/2179129)

  If yes how to put as license for ports came with the camera and we don't have any CAP/PAK or license file as she came

  with license

  Also, we saw 2 files available for download (m9100-s2ek9-kickstart - mz.5.2.8 .bin and m9100-s2ek9 - mz.5.2.8 .bin b b) to use

  Thanks and greetings

  Jose

  Hi Jo Bo.

  What version of the software if your MDS race?

  On your UCS do connect nxos and show ficelleStringString ficelleT inteface and find the mac address.

  It is possible that you could be hitting the bug below. If this is the case, you may need to update the firmware on your MDS.

  Add MAC YES '002a6a', '8c604f', '00defb' for 5 k/UCS-FI

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId= CSCty04686

  Symptom:

  Link change cannot connect any other Nexus or other Cisco Switch in mode VAN with a port channel F.   Question can be viewed in older versions of 5.1

  5.1.3.N1.1a

  but not later

  5.1.3.N2.1c

  Release. Question is also found in

  5.2 (1) N1 (1)

  and

  6.0 (2) N1 (1)

  and later versions.

  Conditions:

  Nexus configured for the link SAN PortChannels or NPIV Nexus mode connected to the UCS via regular F port channel where UCS VAN VAN edge mode switch: YES switch manufactured FI or another Cisco UCS Port WWN: xx:xx:00:2 has: 6a: xx:xx:xx or xx:xx:8 c: 60:4f:xx:xx:xx

  Workaround solution:

  Turn-off on Nexus 5 k TF-port question link mode does not happen with standard F-PORT SAN to remove Portchannel config

  Other Description of the problem:

  To check question collect please see the flogi-event history internal errors whenever the port is attempted OLS, AMENDMENTS, PBA counters will increment. This can be determined via the following output, view port internal info to see all the internal-historic port of error events

• Cisco 6248 FI to Brocade 6510 SAN switch shows Link Down

  Hi all

  His new installation of Cisco UCS with Brocade SAN switch 6510.

  I followed the Cisco UCS to Brocade connectivity Guide.

  Even if the switch side so FI link is not coming. No lights are glowing.

  When I checked the switchshow @Brocade 6510, ports are No_Light status display. Where in other ports, it indicates the number of my storage device WWN.

  At the END, when I click on ports CF, its projection on all State - link down.

  Any who are facing this problem. ?

  Am I missing some configuration steps?

  Kind regards

  Praveen

  This should be a trivial or a very complex problem. I'd rather commonplace.

  Brocade is a CF 16 G switch; up to 8 G negotiation seems to work (storage subsystem).

  Maybe you could try to set the speed on the Brocade 8G port fix!

  Or something with the cables is wrong? Send / receive Crusaders?

  Are shortwave of the MMF SFP? cables connection as well?

  Connect cable from port for example. 31-33, 32 to 34 and see if it works?

• Formula node cannot use 'fabs '? Can someone help me?

  I want to use 'fabs' of the formula node, but it appears the "undefined variable" information, showed in the following image. Anyone know how to solve? Thank you very much!

  Xiaoquan wrote:

  Yes, I tried.  It may be accurate to six decimal places.  I might tink this is the limit of the DBL. You know another way to increase accuracy? Thank you very much!

  This is not true! Make sure that you change the display format of the indicator to show enough digits.

  (right-click... display...)

  

  (If you still have problems, please include your code with some typical data).

• 4 FC by FI uplink ports. But what a single port to send the addresses of WWPN vHBA?

  I have four portis configures as uplink FC by FI and FI woking in end host mode.

  I have 24 blades using two vHBA. vHBA0 and vHBA1.

  24 address WWPN are saved on the uplink of SAN of only 1 FC uplink.

  Same case in the other Brocade.

  That is something we don't want.

  All FC uplink ports must be used.

  We have borcade. Advised not to use the port channel.

  I can manually create groups of pin code and balance the load. But do create a lot of model vHBA and tedious work.

  Other autour work?

  Help, please.

  (1) you can only use Port FC channels connecting to Cisco MDS and Nexus or for FC traffic.

  (2) on each FI, run the following command:

  (nxos) # see the npv flogi-table

  You should see the WWPN by connecting to the FIs, or you have problems downstream with your configs vHBA.

  Make sure that vHBA0 is mapped to FI - A and vHBA1 is mapped to FI - B and the proper vSAN is assigned to the vHBAs. Also ensure that the FC connections are not crossed the FIS for the brocades.

  model vHBA allows very simple, consistent deployments.

• A fact error 4014 showing each time after all the steps

  One of my friends has an iPhone 5 s and he lowered his 10 9.3.5 iOS iOS iPhone it started and inquired "side update" to the rest of the new software update points, but suddenly her iPhone off and does not turn, does not yet show the Apple Logo. I tried to restore it with the new version of the iOS 10.0.2, I file the software theipsw and then restoring the iPhone, iTunes showed me the message "waiting for iPhone" and ultimately showed me a message by this sentence "iPhone" his name' siphons ' could not be restored.» An unknown error occurred (4014).

  I checked the list of steps that Apple suggests their, but nothing happened then, always showing me the same error number. What should I do?

  Thank you for your help and appreciate it.

  I found the solution. Just type here for others with the same problem to solve their problems.

  While the "iTunes with cable" sign is showing and in your computer, showing you "Waiting for iPhone" and things occur, you should restart your iPhone (hold sleep/wake low and low home together for a few seconds) implemented after this attempt to restore your iPhone again you should recover your iPhone software.

  Thank you for your support and more.

• Update IOS Sierra shows only 8 GB instead of 16 GB

  After the upgrade to my system Sierra shows that 8GB instead of 16 GB in which I have two installed RAM 8 GB cards.

  Ive done a reset of the NVRAM/PRAM memory and no help.

  Does anyone else have this problem?

  

  I would try reinstalling the memory in Bank 1. I doubt that Sierra has nothing to do with it, just a coincidence I guess. I've not seen anyone else with this issue since Sierra was released.

• I have an iPhone 6 more, an official version of China, it shows a battery indicator when I turn off support, is this normal? I can depulicate this function to another iPhone? I know how?

  I have an iPhone 6 more, an official version of China, it shows a battery indicator when I turn off support, is this normal? I can depulicate this function to another iPhone? I know how?

  I remember reading somewhere on the Apple site in recent years on some models of Chinese iPhone with this capability. No other iPhones display this and there is no way to enable it. I can't find the article which includes this information.

• Calendar is the name of the month showing

  This is a new, just started my laptop this morning and the menu bar showed M10 5 sea, which is also how it looks in the calendar. All other months are the same (M01, M02, etc.).

  Tried resetting the PRAM, but can't see any prefs calendar that I needed trash as the only one is the synchronization agent.

  Anyway to get my laptop to remember what it October again? Do not know if it is connected but it also completely forgotten that I have my trackpad tap to click and three fingers to drag, and I put DND in Notifications.

  Hi Ben Collier.

  Looks like you're some problems with your Mac, specifying the digital number for the month, instead of the names of the months themselves. Also, you have some problems with the trackpad preferences and do not disturb for notifications. I can see how you would like to get this all resolved. We'll see what we can do.

  I would like to first of all, you have set the trackpad preferences and do not disturb the notifications as you want, then start up the Mac in safe mode.

  OS X El Capitan: Notifications preferences

  OS X El Capitan: start in safe mode

  Once you're in safe mode, please try to see if the names of the months are returned and that the trackpad still works as expected. If the names of the months back, please restart the Mac and open the calendar application and then check to make sure that the problem is solved. If issues are not resolved in safe mode, please create a test user and verify. This will help us to determine if the questions are the scale of the system or a specific user.

  How to test a question in another account on your Mac.

  Thank you for using communities Support from Apple. Have a good night!

• My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  Assuming that you have a valid SIM card in the phone, it is more often symptomatic of a phone that has been hacked or jailbroken to unlock.

  Where do you have the phone first?

• I have someone just showed about 100 pictures of my iPad. Now, the pictures are missing, and the "recently deleted" folder is also empty. What can I do?

  I have someone just showed about 100 pictures of my iPad. Now, the pictures are missing, and the "recently deleted" folder is also empty. What can I do?

  Have you done something after their show.

• Watch OS shows 3 past mode of power with almost total of battery reserve

  Hello world

  I have a problem since I updated my watch to watch OS 3. Watch (series 1) goes into unexpected battery power with an almost total reserve mode. It produces one or two times a day and the only thing that I recognize that the watch remains black when I look at my wrist. It shows only the time in green numbers when I press a button and I need to reboot by pressing the two buttons. After the reboot, the watch displays + 80 or even 90 + % battery life and it works as expected for the rest of the day (if is not the same problem from happening again). Especially my battery is 50 + % at the end of the day.

  Today I reset the watch and recovered from backup, but that changed nothing. The watch went to the mode of power with a range of 78% a few minutes ago

  I am really frustrated because it happens very often and I could not find a solution to this problem. Decommissioning watch OS 2 is not an option...

  Thanks in advance for your help, I am really stuck on this issue.

  Best regards from Germany,

  Matthias

  Hi, Matthias

  If your dial of the Watch includes the complication of the battery, it is possible that accidental screen interactions are causing your issue.

  Tapping on the complication battery indicates the level of battery with a large button to put the watch mode of power reserve.

  You can consider using your watch for a while without this complication on the face of the watch to see if the issue is recurring:

  Change the face of the watch on your Apple Watch - Apple Support

• Can Notes show the number of records with each folder?

  Can Notes show the number of records with each folder?

  No it can't. It would be nice tho.

• Films/movies, TV Shows/TV programs

  When I upgraded to OS X Sierra or a related iTunes update, he has changed the user interface and now I have some TV programs instead of TV shows and movies instead of movies. I'm in Australia. Is there a way to change it back?

  TIA

  I did not pass so I don't know if they changed anything with the version. You can make sure iTunes is localized for your region.  June 2014, no localized iTunes - https://discussions.apple.com/thread/6306009 - language settings

• Apple Mail will not show my mail messages

  All of a sudden my iMac (27 inch, end 2012) Sierra running (OSX 10.12) does not display my IMAP messages in Mail.app.  Inbox window (for example) says "Inbox (0 messages filtered)", and other mailboxes are similar.  I guess the problem is the word 'filtered', but I didn't ask to filter anything.  If I search something in common, like '@', it shows all messages.

  I upgraded to Sierra for a few days, it didn't happen immediately.  This does not happen on my MacBook Air or my office iMac, two Sierra also running.

  I tried to rebuild the mailboxes, and also remove account IMAP and then add it back.  Seems to have helped.

  Any help would be appreciated.  Thank you.

  Problem solved.  In another thread, I noticed that there is an element in the view menu "toggle the filter messages '.  I don't know how it happened 'active', or what filter it is talk, but disable Solver problem.