Brochure printed in CMYK seems always bad

Similar Questions

• My computer date and time is always bad.

  I continue to correct the date of my computer and time but the date and the time is always bad when I restart.

  You need to replace your battery "CMOS".  It takes around a year or two and when the computer loses date & time is is a death gives usually far.

  The battery is cheap and fairly easy on most to replace.

• Why my image does not reach the edges of the printed page, but seems in good condition in pdf?

  Why my image does not reach the edges of the printed page, but seems in good condition in pdf?

  Most desktop printers cannot image all the way at the edge of the page.

• How can I feel Dreamweaver files / printing no longer seems to work on MAc

  How can I feel Dreamweaver files / printing no longer seems to work on MAc

  Code print function has been removed from the PCOC (not exactly why).

  You can help bring back by submitting a request here: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

• deskjet1512: supplied with the printer ink cartridges seem to be bad.

  With my printer ink cartridges are different from those shown on video installation.  The contacts in video are on the long side & albums, contacts of mine are on the top and the short side.  They don't fit in.  The number of cartridge amounts to 61 and corresponds to what is printed on the printer.  I can't make them fits correctly, they won't with the long (blank) side out but not attach or stay in.

  Hello @dawna4d55,

  Thanks for posting in the Forum from HP Support.

  I see that you encounter some difficulties to install ink in the all-in-one printer HP Deskjet 1512. I would like to help.

  I agree that the printer takes cartridges #61. I have the 2540 all-in-one (almost exactly the same model) at home and I also found the initial installation of ink to confusion. When I realized that the main cartridge sticker or label should be facing while he sits on the cartridges and readable installation is a breeze.

  For your reference, here are some resources that may clarify the configuration of ink:

  1. Figure: Insert the cartridge into place

• V725w printer as wireless but always off line on windows 10

  I have download the utility of configuration of the printer and put in place in the wireless and everything seemed great printer that presented themselves as connected to the network, but the State of the computer is 'offline' and is always. If I set the printer offline use, the status changes to "offline" - "printer offline" reset the indicator and printer is "offline" status

  I've deleted and reinstalled several times and we tried to update driver from the website, but they fail to install it and I find myself with a printer that does not print.

  Any suggestions or know patches would be appreciated

  Art

  P. S.

  I want to thank Rick for his answer but read the articles and have tried most of the suggestions in them. The printer is not in demo mode, but was in a try. Printing the network configuration is correct and my network believes that it works properly, I guess my concern is the problem, it is with windows 10 or at least on the computer side understand how to find the printer on the network.

  Art,

  Try to read these articles. I suspect that the printer may be in demo mode.

  Troubleshooting installation for the Dell 525w and 725w AIO inkjet

  Troubleshooting of network problems on the Dell V525w and V725w AIO inkjet printers

  Don't forget the programs anti-virus and firewall will block communications.

  Rick

• Brochure printing does not print all pages

  I have a file booklet that I printed from InDesign, a couple of months without problem. I went to print this week and the last pages 2 and 3 are not printing. I tried with a version of the file created by someone else. Same problem - last pages 2-3 didn't print. I tried to print to another printer, print from another computer. I always get the same result - the last 2-3 pages do not print. This happened to someone else? Anyone know what I can do about it?

  Thank you

  Tery

  An alternative:

  1. One of the manufacture of booklet scripts * for InDesign, allows to create a new InDesign doc "double width" properly imposed in the order of the brochure.
  2. Print the new Doc, or export it to PDF.

  * See, for example, the free script to the "http://sterlingcomputing.com/make-booklet-2016.html". (I am the author).

• Brochure printing error message

  Even if all my PAGES have the same specified size (letter size), when you try to print a brochure I get this message: "the active document uses multiple page sizes. Print book only works with documents that use a consistent page size"not allowing no not to me to impose my document.

  My finished booklet size is letter size with bleeds, but the size of the PAPER for the "spreads" is tabloid size

  Help please.

  This is a known bug.

  Copy/paste of the bad file on a new

• M2Q28A: what I'll do my printer Deskjet GT 5820 always having paper mismatch error

  my printer is brand new, but when I started to print always says paper mismatch, im trying to find how to solve this problem. I tried to change the default paper size detected automatically by the printer via the built-in webserver (EWS) and I have cheked the default paper size but does not please help me how to solve this problem.

  Hey @S3dnnie,

  Thanks for the information!

  Let's try the following steps:
  
  • Load legal-size paper (1) in the paper from your printer tray

  • (2) click the Start button

  • (3) open devices and printers

  • (4) right click on your Deskjet

  • (5) left click on Printing Preferences

  • (6) click on the paper/quality tab

  • (7), select Advanced Options at the bottom right

  • (8) according to the paper size drop-down select legal

  • (9) click on OK

  • (10) select apply and OK in the print options box

  Now that the pilot has been set to Legal, printing test.

  Please click "accept as Solution" If you feel my post solved your problem, it will help others find the solution. You can also click the "Kudos, Thumbs Up" on the right to say 'thank you' to help!

  I would like to know how it goes!

• OfficeJet 8610, 2 faces of bright brochure printing problem

  On my Officejet pro 8610 with brilliant for HP Brochure paper, I used the automatic printing function 2 faces to print color brochures.  Every attempt, the rollers in the printer's vertical on the front lines, as he was pulled back into the printer.  This is almost certainly due to inadequate drying time between the first and second parts printing.  When the 2 sides is done manually and allow enough dry time, the rollers don't cause streaks.  This problem didn't happen if plain paper or matte Brochure paper was used.  I tried with a HP Officejet 8620 and my 8610 with the same problem.   Is there a way to increase the drying time for glossy paper or any other problem?

  Hello

  It is not possible, although the duplexer is not intended for this side of paper and making such damage most probably the duplex accessory rolls.

  Please check paper output specifications > paper section capacity tray of the printer dpecifications below, the duplexer is intended only for 60 to 105 g/m2 paper. :

  http://support.HP.com/us-en/document/c04085902

  Shlomi

• My HP printer does not seem to connect with the cartridge world ink cartridges.

  My HP printer 6310v all in one does not seem to allow the use of cartridges per Cartridge World.  It gives an error of cartridge indicating the cartridge must be replaced and not allow any impression at all.  Help!

  The reliability of the charging/reman cartridges varies considerably, but is generally low, see here for a study.

  The steps described on this page can help.

  I suggest you contact Cartridge World for a warranty replacement or chalk it upward to experience and get a HP cartridge.

  (HP printers releases no cartridges because they are charging/reman, but they make an electric test to make sure that the cartridge is not working properly.  They will reject cartrdiges that do not pass this criterion.)

• Photosmart D5460: Printing of documents (black) always comes the color (black) cartridge No Doc blk cartridge.

  Everything I print from this machine's documents in black.  It has five ink cartridges grouped as; three colors and black, all the same size and a single larger black cartridge placed a bit far with the other four.  Print quality is good, but the machine STILL uses ink fron the small black cartridge in the color group.  I've never had to replace the large black cartridge, only the small number of times.

  So my question; Why doesn't big get used for documents and small black format only for color work?  Although this seems logical, I can't find anything that says that's how it should work or options to make it work this way.  Help!

  Hello

  The little black is probably the Photo ink cartridge (which has a symbol of camera on him). Your configuration is likely to print in color or grayscale, so the printer will mix all the colors to black. Please try the following configuration (for Windows):

  (a) double-click the desktop printer icon.
  (b) click on set preferences.
  (c) click on Advanced (can be buried in the quality tab).
  d select "Black ink" only for printing in grayscale
  e click Ok /apply .

  Kind regards.

  Note: the steps above may not be EXACTLY the same for your printer.

• set the printer to print only one page always

  I have a HPlaserjet MFP 1005. I want to put to print only one page which isusually necessary. How do I?

  Hey @neelp,

  Welcome to the HP forums! I hope you enjoy your stay here.

  I see you try to set your Laserjet P1005 MFP always print one page only. This isn't an option through Windows PC or Apple, but there are two ways to work around this problem. The first would be to pay attention to what is being printed by activating the mode print preview before you print. The second solution would be to have only a sheet of paper in the printer at any time.

  If you have questions about the verification of print previews please let me know which operating system you use on your computer but also what program you use and I see if I can help you with that. If you are not sure what your operating system is you can click here to find. Even if you have any other questions please let me know.

  If this solves your problem then please let other users of the forum know clicking on accept as a Solution.

  I hope this helps and I hope you have a great weekend!

• 2600n: printing on Windows 10 always prints to the file rather than to my 2600n

  I bought a new laptop which had 10 (64-bit) Windows installed already.

  When I connect my 2600n printer to the laptop via the USB port and attempt to print anything, the print function recognizes the 2600n is available, but the software behaves as if I chose the option to "Print to file" instead of send data to my printer.

  On the Microsoft Web site, I tried a Windows 10 compatible driver for the 2600n.  I had to download the Microsoft Update catalog that I searched.  The catalogue lists the 2600n, but it does not list Windows 10 like it in support.  The latest version of windows that supports 2600n is Windows 8.1.

  HP has a driver for the 2600n that works on Windows 10 (64 bit)? ... or where can I find?

  I noticed that my 2600n is not the default printer.  Even though I chose the 2600n for the print operation, Windows 10 boiled corn have a bug in the driver and it always sends to the default value.  The default is to print to a pdf file.

  3 times in 3 different ways, I tried to change the default printer to the 2600n and my attempts have been ignored.
  The 3rd time, it looked like it changed the default printer of what I wanted, but when I went to use,.
  It's the same old problem.  Then I left the print operation and came out from the browser where
  I tried printing and did something else.

  I used the NotePad editor later, when I thought I would try to print something new and this time it worked.

  Apparently change the default printer has not taken effect properly and I had to get out of the service where I was doing printing before it would work.

  So the solution is to change the 2600n to be the default printer... and wait a little and do something else.
  out of everything you did before you try again.

• Hewlett Packard printer while a C4599 always telling me to align

  Printer continues to display Aline.

  I setting line three times, but it keeps telling me that there not well treat.

  I put in new cartridge, so I know it's OK.

  Help

  From Internet Explorer

  Original title: Hewlett Packard printer device a C4599 all-in

  Hi Pearl,

  It seems that you need help to correct performance "All in one printer C4599" printer.

  See the following links, which have enough information to solve the problem of the printer's performance.

  a message telling me to align my printer cartridges keep appearing.

  http://h30434.www3.HP.com/T5/Mac-printing-and-scanning/a-message-telling-me-to-align-my-printer-cartridges-keeps/TD-p/1362955

  Alignment page does not print.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02918679&cc=us&DLC=en&LC=en&product=5096386&tmp_track_link=ot_search

  You can download the driver from the following link.

  Printer drivers all-in-one HP Photosmart C4599 & downloads
  http://h10025.www1.HP.com/ewfrf/WC/softwareCategory?CC=US&DLC=en&LC=en&Product=3757826&Task= &
   
   
  I hope this helps.