Broken screen, Presario CQ60-211DX

Similar Questions

• How can I reset a compaq presario cq60-211dx

  How can I reset a compaq presario cq60-211dx to factory settings to remove password...  My son put a password in order to prevent his brother to use his computer... the screen broke and we ended up buying another computer... but now, we have fixed this one, but we tried every password we could think, but no luck... a computer repair technician told me the only way to bypass the password is to reset the computer to factory settings... How can I do this?

  Hello

  Please find the link given could help you resolve your problem.

  Restore the PC to its original state by using the f11 key

  
  

• Presario CQ60-211dx - upgrade CPU T3400; Update Flash?

  I have a Compaq Presario CQ60-211DX, that has a CPU Intel 585. After reading the forum, I bought a CPU T3400 as an upgrade. Do I need to Flash the BIOS? It is currently updated for the 585, but it will be different for theT3400? If so, I flash before or after you installed the new processor?

  Thank you very much!

  In 585, I assume you mean a Celeron. Here is the Service Manual:

  Manual

  You almost certainly have a GL40 chipset Board and the T3400 should be a quick replacement.  No need to do anything in the BIOS.

  The T3400 and the 585 have the same cache, run at the same speed. I don't know how much improvement you will achieve, but I guess that saw 2 cores can be worth.

• Compaq Presario CQ60-211DX: Compaq Presario CQ60 Motherboard

  Hello!  My wife's cell phone can no longer pull a load of the power supply.  I tried different batteries and bricks of different powers.  Free of charge.  I want to try to replace the motherboard (thinking it is maybe the power supply is not working.)  Can someone tell me what is the correct model number for my motherboard?  I see many there to buy including 498462-001 and 501266-001.  Or the other of them are the right pair?

  Thank you

  Tom.

  Hello

  501266-001 is correct as shown in the following list:

  http://PartSurfer.HP.com/search.aspx?SearchText=NB049UA

  Kind regards.

• Compaitible processors for Compaq Presario CQ60-211DX

  So I plan to upgrade my processor computers for the delay I get (it's a single core Celeron 585 clocked at 2.16 ghz)

  Now I want to upgrade to an Intel Core 2 Duo clocked @ 2.00ghz (7300), that would be defienitly thrust my performance. It has the same socket but I'm not sure what bios go or if its going to work.

  I heard that this laptop supports this series 7xxx and nothing below or above. This is false.

  Thanks in advance

  Hello:

  Because your laptop with a celeron processor, it has the Intel GL40 chipset.

  This means that the best processor you can install is the Pentium T3400, because the GL 40 chipset can run than processors with front side bus to 667 MHz.

  See the manual on the link below, Chapter 1, page 1-1.

  http://h10032.www1.HP.com/CTG/manual/c02985882.PDF

• HP Presario CQ60-211DX: Question about adding ram

  My moms HD took a dump and I'll replace it and update the ram.  After defining and entry model information site, she came back with a couple different options.  He says that I can use PC2-5300 or PC2-6400.  The PC processor is a Celeron 585 2.6 single core with a 667 Mhz FB.  As I understand it, requires PC2-5300 667 Mhz FSB of the processor?  (This is what I guess I)  PC2-6400 runs at 800 Mhz FSB?  I just think?  And what advantage would I using the PC2-6400 on the 5300 with my current set in place?  He said that the two are compatible and they are at the same price.  Help, please.

  Thank you

  Ricky Brown

  Your a chipset GL40, which culminates in the DDR2-667. Also known under the name of PC2-5300 (same thing). So you can install DDR2-800, but it will run at the same speed that is 667 mhz DDR2-667. If they are both the same price get the DDR2-667. DDR2-800 is generally a bit more available and a little less money, believe it or not, but apparently not where you found it.

• Questions of Compaq Presario CQ60 with restore settings factory, sticked on a blue screen (BSOD, no)

  Hello, I have to get my usual laptop fixed, so I decided to get out of my Presario CQ60, which I have not used in 4-5 years. The operating system is Windows Vista Basic and I want to perform a restore factory settings (I don't mind losing the data on it) and upgrade to Windows 7 Home Premium. So far I tried to do a restore to factory settings by pressing F11 several times to start, and I get to a screen that says "Windows loading files", which leads to a black screen. After what seems like a long time, a blue screen appears where I have control of my cursor (not the Blue Screen of Death) and nothing has changed since. I will update with any changes, because things seem to happen after letting it go for a while, but for now any suggestions on what to do? Let me know if I've left out any information. Thank you!

  Hello

  We can not help you with this problem of factory settings.

  Press F11 at STARTUP is the method that HP plans to use.

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c00809678#n405

  1. Turn off the computer if it is not already turned off.
  2. Disconnect any external devices such as printers, USB drives and memory cards.
  3. Turn on the computer and immediately press the F11 key several times , about once a second, until the Recovery Manager opens.
  4. In the Recovery Manager welcome screen, click Next .
  5. On the Microsoft System Restore screen, select No , and then click Next .
  6. On the System Recovery screen, select Yes , and then click Next to continue the recovery process.

  etc.

  And that is the recovery Partition and the process which they installed during the manufacturing process, not Microsoft HP

  You will need to contact HP or ask questions in the forums to Support HP about this problem.

  http://h30434.www3.HP.com/

  @@@@@@@@@@@@@@@@@@@@@@@@

  And I don't think that it will be suitable for the upgrade to Windows 7 Home Premium as being Vista Basic, the material it will not suitable or sufficient to run Windows 7 properly and I have no idea if HP even wrote Windows 7 drivers for it.

  Before you buy Windows 7 after Vista fixed:

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  «Installation and reinstallation of Windows 7»

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  See you soon.

• I broke the screen on my presario cq60-218em, external display an option?

  Hello

  I have a Presario CQ60-218EM and I broke the screen! It will not display anything even if the laptop turns on again.

  Can I attach an external display (from my office) and view what should be on the screen to verify that everything works OK before I get the screen fixed?

  If possible how do I know my Presario to send the output to the external screen? It will work to display the BIOS also?

  Thank you

  Justin

  Yes you can connect an external monitor that is hard. Normally, you have to hold the function (fn) key and press the f key on the top of the keyboard that has a small picture of a screen on it - I think that its f4 on your keyboard. Once everything looks OK... your safe to buy a new laptop screen... or have professionally installed.

• Problem with the Compaq Presario CQ60-216DX

  Hello, I'm having a problem with my NEW Compaq Presario CQ60-216DX mother. Every time it boots up vista and I run internet explorer, I get a strange blue screen which exports a file memory and reboots.

  I have the feeling that this might have been caused by a virus, but I can't do something, because Vista can't reformat long for some reason any.

  I tried a hard test in my motherboard and he said that there is something wrong with my hard drive.

  I don't know what is happening, right now I'm in safe mode trying to find viruses that Nod32 does not detect everything.

  Can someone tell me how I can get either the Windows XP Discs to work at startup (which, for some reason, they do not), or an alternative to a long format?

  Is there a way to fix this without reformatting? There's almost nothing on this laptop anyway so I'm always willing to do. A regular format has done nothing to solve the problem, I did it with Ubuntu and it did a quick format, but I had no problem with Ubuntu. Then I reinstall Vista and I am constantly having problems with a blue screen of death.

  Someone knows how to fix this?

  The Chemich does not exist

  If you want to do a reinstall of Vista then press F11 continuously during the boot upward. This will bring you in Recovery Options were you can choose to restore the system in the same State as when it was purchased. But if, as you suggested, is that a problem of hard drive reinstall won't help.

• Display does not-Compaq Presario CQ60

  Hello

  I have a Compaq Presario CQ60. The screen doesn't seem to work. When I turn on the laptop

  the screen remains black. No start-up screen, nothing.

  I can't go into the bios, because I have no screen. The screen remains black.

  The hard drive seems to work and all other functions seem to work but I don't know because I don't have any screen.

  Is this a known problem with the Compaq Presario CQ60?

  How can I solve this problem?

  Thank you

  It seems that the Board needs to be replaced.

  Your laptop is still under warranty?

  If Yes please contact HP. How to do?
  Click on the link below and choose your country:
  Contact HP worldwide

  If this isn't the case, then you can visit any service laptop to solve this problem.

• How much ram is on a HP Compaq Presario CQ60

  HI - the amount of RAM is native on a Compaq Presario CQ60 HP? How much he will have in total? I wait to see how much RAM is on my laptop? Thank you, Jane

  When you request support, please provide the model name and product number complete (p/n) of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

  The information requested above are on the bottom of your computer, inside the battery compartment or on the BIOS boot screen. Please see How can I find my model number or product number? for help more to find this information. DO NOT include your serial number. Please enter the product/model information consumer HP Online Support page and post it here for our review.

  

  Please see computer Hope - determination of the amount of RAM is installed and available to determine the amount of RAM installed on your computer.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Keyboard on Compaq Presario CQ60 problem

  My daughter has a CQ60 notebook that was working fine this morning, but this afternoon the Q W E R U I O and P keys have stopped responding. I could check, all other keys are not affected. Any suggestion would be gratly appreciated.

  Before I / we assume that the keyboard is bad you need to reinstall the driver, that seems to never work, but we should give it a shot anyway. Go to the control panel and find the Device Manager. Click on that and find "Keyboard" in the list, click the small arrow to decompress. Right-click on the keyboard and choose to uninstall the driver, ignore the warning and continue. You will be prompted to restart the computer and start it will automatically reinstall the driver.

  _____________________________________________________________________________________________

  Here are some of ebay.co.uk.

  http://www.eBay.co.UK/SCH/i.html?_FROM=R40&_trksid=p5197.M570.L1313&_nkw=CQ60-212EM+keyboard&_sacat=see-all-categories

  They are a little expensive, I think you'd be better off getting one of the United States that is ready to ship on the seas, a ship from Hong Kong (probably where they are made).

  http://www.eBay.com/ITM/new-keyboard-HP-Compaq-Presario-CQ60-series-496771-001-us-layout-black-/200662921015?PT=PCA_Mice_Trackballs&hash=item2eb8712f37

  Here's where I got that from.

  http://www.eBay.com/Sch/i.html?_nkw=CQ60+keyboard&_sacat=0&_odkw=CQ60-212EM+keyboard&_osacat=0&_trksid=p3286.C0.M270.L1313#ptm190506653154

  Here is your service manual and a few videos in the media library of the HP Services.

  http://h10032.www1.HP.com/CTG/manual/c02985882.PDF  Look on page 4-18 and a bit beyond. Be very careful when you remove the cable from the ZIF connector on the motherboard, if you break that he condemns the whole motherboard.

  http://h20574.www2.HP.com/default.htm?lang=en&cc=us&hpappid=psml  If you have difficulties to navigation in your model and videos, post again and I'll give you some instructions. Give the page time video too load. Yours is very easy to remove, there are 3 screws marked with a symbol inside the battery bay keyboard that hold it in place and it throws just to go to the nearest rear of the screen.

  

  Once, you get to the video page, navigate to the keyboard in the left column.

  Note that it does not list the CQ60-200 series, but the 100 series is the same.

  You can also order the keyboard of HP once, you know the part number, it will be at the back of the keyboard ending with

  -001.  You will pay bonus for it through HP and you will not be able to order the parts anyway, I discovered that it is only available in the United States, it is perhaps different in the United Kingdom.

• Keyboard and trackpad which does not Compaq presario CQ60

  Help!

  My keyboard and trackpad on my Compaq Presario CQ60 laptop do not react and do not have external devices to see if it is an internal matter. Cannot restart in Mode safe as the keyboard is unresponsive, however it allows me to type my password to access vista! I think I just lock the computer, but do not know how unlock, various forums have specified relocation drivers etc, but I am unable to do this without functional keyboard and do not know how if I pressed a key combination that caused it. I don't know if it's a problem of Vista or Compaq/HP.

  Immensely from any help appreciated!

  as far as I know, if you can type your password on the login screen, then the keyboard works, if the problem appears after the connection or it will appear when you are on your desktop screen, it may be a problem of operating system or a problem with corruption of user account

  the keyboard would be a hardware failure, if when you turn on your nb, there will be no ligts on the keyboard will make the capslock key does not illuminate or does not at all as long as you turn on the nb

  for the touchpad, try to check if its or disable... If there is a light orange above the touch pad then sound off, toggle the switch the light to turn to blue...

  so before anything else... TRY THIS FIRST!

  1. remove the battery

  2 disconnect the power adapter

  3. no power supply at all, press in and hold the button for 1 min... Be sure that it will be 1 min...

  technically, we call this HARD RESET... This process would free electricity static that could be included on the power button spout these electrostatic charges sometimes causes harware malfunctionalities...

  then it this step does not work... do this...

  try to go into safe mode by continuously pressing F8 during startup (press F8 when you see the hp invent screen), then you will be directed to advance startup options... Choose last known good config... Then, it will boot to the last known good setting...

  Please let me know if this does not work...

  Otherwise, ' choose repair your computer "on the start options... Choose the American keyboard layout... so if asked for a user name and password, you can change the administrator username username and then put your password... If you do not use any password leave it blank... then choose Startup Repair...

  Please let me know if this does not work...

  I hope this helps...

• Compaq presario cq60 webcam has a loose wire/connection

  I have a HP compaq presario cq60 laptop and I have established my webcam has a loose wire/connection.  I opened the top of the screen bezel/but I can not locate the wire - no one knows where it is located and how to reconnect.   There are training here for the loose connection HP Pavillion but none for the compaq presario (which has another set in place on the inside).  I hope someone can help. Thank you. Denise

  Hi Denisemr,

  I suggest you to contact the manufacturer of the computer for assistance on this issue.

  http://www.Compaq.com/country/index.html

  It will be useful.

• Laptop Compaq Presario CQ60-300SO - how to make HDMI work with Win 7

  I've upgraded to Windows 7 from XP.

  I connect the HDMI cable to my TV.
  The PC displays both screens, but there is no signals reaching the TV.
  I uninstalled the software of the graphics card and let the Win Update to find the driver. Same results.

  Here's my setup.

  How to make it work? It works very well with a VGA cable. And I tried many televisions.

  Martin

  _________________________________________________________________

  Name of the operating system Microsoft Windows 7 Enterprise
  Version 6.1.7601 Service Pack 1 Build 7601
  Another Description of the OS is not available
  Manufacturer of operating system Microsoft Corporation
  Name of the MARTSHP system
  System manufacturer Hewlett-Packard
  System model Compaq Presario CQ60 Notebook PC
  System Type X 86-based PC
  Processor AMD Sempron (TM) TR-42, 2100 Mhz, 1 Lossnay, 1 logical processors
  BIOS Version/Date Hewlett-Packard F.54, 18.08.2009
  SMBIOS Version 2.4
  Windows directory C:\Windows
  System directory C:\Windows\system32
  Boot Device \Device\HarddiskVolume1
  The local United States
  Hardware Abstraction Layer Version = "6.1.7601.17514".
  MartsHP\Administrator user name
  Zone schedule Southeast Asia standard time
  Physical memory (RAM) 4.00 GB
  Total physical memory 2.75 GB
  1.60 GB available physical memory
  5.50 GB total virtual memory
  4.13 GB available virtual memory

  Hi realpommy. If you encounter problems with HDMI output and let Windows determine the pilots, who could be part of the issue.  First of all try to install these Windows 7 drivers provided by HP for your laptop: NVIDIA nForce Chipset MCP77MV graphics drivers

  After installation and reboot, if you still have problems with video output look in Device Manager, to ensure that there is no error, or "unknown devices".  The section "Understanding of the symbols of error Device Manager" in this document:
  Information from the Device Manager in Windows 7 to illustrate some possible errors.

  If there is no error in Device Manager, do through these documents for more information and the last for troubleshooting ideas:
  Connection of a monitor, projector or a TV (Windows 7)
  Overview of HDMI and DVI for PC connections

  HDMI display resolution and problems of his (Windows 7 and Vista)

  Let me know if it helps.