Keyboard on Compaq Presario CQ60 problem

My daughter has a CQ60 notebook that was working fine this morning, but this afternoon the Q W E R U I O and P keys have stopped responding. I could check, all other keys are not affected. Any suggestion would be gratly appreciated.

Before I / we assume that the keyboard is bad you need to reinstall the driver, that seems to never work, but we should give it a shot anyway. Go to the control panel and find the Device Manager. Click on that and find "Keyboard" in the list, click the small arrow to decompress. Right-click on the keyboard and choose to uninstall the driver, ignore the warning and continue. You will be prompted to restart the computer and start it will automatically reinstall the driver.

_____________________________________________________________________________________________

Here are some of ebay.co.uk.

http://www.eBay.co.UK/SCH/i.html?_FROM=R40&_trksid=p5197.M570.L1313&_nkw=CQ60-212EM+keyboard&_sacat=see-all-categories

They are a little expensive, I think you'd be better off getting one of the United States that is ready to ship on the seas, a ship from Hong Kong (probably where they are made).

http://www.eBay.com/ITM/new-keyboard-HP-Compaq-Presario-CQ60-series-496771-001-us-layout-black-/200662921015?PT=PCA_Mice_Trackballs&hash=item2eb8712f37

Here's where I got that from.

http://www.eBay.com/Sch/i.html?_nkw=CQ60+keyboard&_sacat=0&_odkw=CQ60-212EM+keyboard&_osacat=0&_trksid=p3286.C0.M270.L1313#ptm190506653154

Here is your service manual and a few videos in the media library of the HP Services.

http://h10032.www1.HP.com/CTG/manual/c02985882.PDF  Look on page 4-18 and a bit beyond. Be very careful when you remove the cable from the ZIF connector on the motherboard, if you break that he condemns the whole motherboard.

http://h20574.www2.HP.com/default.htm?lang=en&cc=us&hpappid=psml  If you have difficulties to navigation in your model and videos, post again and I'll give you some instructions. Give the page time video too load. Yours is very easy to remove, there are 3 screws marked with a symbol inside the battery bay keyboard that hold it in place and it throws just to go to the nearest rear of the screen.

Once, you get to the video page, navigate to the keyboard in the left column.

Note that it does not list the CQ60-200 series, but the 100 series is the same.

You can also order the keyboard of HP once, you know the part number, it will be at the back of the keyboard ending with

-001.  You will pay bonus for it through HP and you will not be able to order the parts anyway, I discovered that it is only available in the United States, it is perhaps different in the United Kingdom.

Tags: Notebooks

Similar Questions

  • Problem of PC keyboard laptop Compaq Presario CQ60-224NR after the upgrade from Vista to Windows 7

    I have recently upgraded the OS on my laptop PC Compaq Presario CQ60 224NR Vista Service Pack 2 to Windows 7 Home Premium 32 bit Service Pack 1.  I updated the drivers before upgrading and checked for the latest drivers after upgrade also.  After the upgrade, the keyboard of the laptop works only partially when I use a web browser.  This includes IE and Firefox.  Above the QWERTY keys do not work correctly.  If I press one of these keys or SHIFT and one of these keys, the last character, symbol, or space I typed before is repeated instead.  Y at - it a fix for this problem?

    Well, I searched for several hours and found a solution, at least for me I am a customer of Comcast and I installed constant guard.  There is a key logger that is included in the package that it causes the problem.  I uninstalled GuardedID and my problem disappeared.  I hope it works for you.

  • Compaq Presario CQ60: problems with a password on my compaq Presario CQ60 power

    Hi, my niece was playing with my CQ60 and now there is a power on password, the code that appears after 3 fails is 57835687 any help would be greatly appreciated. Im sorry if I asked this question in the wrong place. Thank you

    @millicent8383

    Enter 48793209

    Kind regards

    DP - K

  • Keyboard and trackpad which does not Compaq presario CQ60

    Help!

    My keyboard and trackpad on my Compaq Presario CQ60 laptop do not react and do not have external devices to see if it is an internal matter. Cannot restart in Mode safe as the keyboard is unresponsive, however it allows me to type my password to access vista! I think I just lock the computer, but do not know how unlock, various forums have specified relocation drivers etc, but I am unable to do this without functional keyboard and do not know how if I pressed a key combination that caused it. I don't know if it's a problem of Vista or Compaq/HP.

    Immensely from any help appreciated!

    as far as I know, if you can type your password on the login screen, then the keyboard works, if the problem appears after the connection or it will appear when you are on your desktop screen, it may be a problem of operating system or a problem with corruption of user account

    the keyboard would be a hardware failure, if when you turn on your nb, there will be no ligts on the keyboard will make the capslock key does not illuminate or does not at all as long as you turn on the nb

    for the touchpad, try to check if its or disable... If there is a light orange above the touch pad then sound off, toggle the switch the light to turn to blue...

    so before anything else... TRY THIS FIRST!

    1. remove the battery

    2 disconnect the power adapter

    3. no power supply at all, press in and hold the button for 1 min... Be sure that it will be 1 min...

    technically, we call this HARD RESET... This process would free electricity static that could be included on the power button spout these electrostatic charges sometimes causes harware malfunctionalities...

    then it this step does not work... do this...

    try to go into safe mode by continuously pressing F8 during startup (press F8 when you see the hp invent screen), then you will be directed to advance startup options... Choose last known good config... Then, it will boot to the last known good setting...

    Please let me know if this does not work...

    Otherwise, ' choose repair your computer "on the start options... Choose the American keyboard layout... so if asked for a user name and password, you can change the administrator username username and then put your password... If you do not use any password leave it blank... then choose Startup Repair...

    Please let me know if this does not work...

    I hope this helps...

  • Problem with the Compaq Presario CQ60-216DX

    Hello, I'm having a problem with my NEW Compaq Presario CQ60-216DX mother. Every time it boots up vista and I run internet explorer, I get a strange blue screen which exports a file memory and reboots.

    I have the feeling that this might have been caused by a virus, but I can't do something, because Vista can't reformat long for some reason any.

    I tried a hard test in my motherboard and he said that there is something wrong with my hard drive.

    I don't know what is happening, right now I'm in safe mode trying to find viruses that Nod32 does not detect everything.

    Can someone tell me how I can get either the Windows XP Discs to work at startup (which, for some reason, they do not), or an alternative to a long format?

    Is there a way to fix this without reformatting? There's almost nothing on this laptop anyway so I'm always willing to do. A regular format has done nothing to solve the problem, I did it with Ubuntu and it did a quick format, but I had no problem with Ubuntu. Then I reinstall Vista and I am constantly having problems with a blue screen of death.

    Someone knows how to fix this?

    The Chemich does not exist

    If you want to do a reinstall of Vista then press F11 continuously during the boot upward. This will bring you in Recovery Options were you can choose to restore the system in the same State as when it was purchased. But if, as you suggested, is that a problem of hard drive reinstall won't help.

  • Compaq Presario CQ60: Wireless driver Compaq Presario CQ60

    I recently changed the House, but all with a modem of fastweb. The model of modem is the same as that of the old House, but they changed the modem gives me a new and my Compaq Presario CQ60 is no longer connects to the Internet, but only for the modem. Connection network tells me that the network is not identified and the internet does not work. I tried the modem power cycle and install different drivers, but nothing worked. What can I do?

    Hello:

    Your laptop is probably the Atheros AR5007 wireless network adapter.

    If so (you can check by going to the Device Manager, expand network adapters device category to see the name and number of the model wireless network card), this driver installation normally solves this problem...

    FTP://ftp.HP.com/pub/SoftPaq/sp54501-55000/sp54972.exe

  • Display does not-Compaq Presario CQ60

    Hello

    I have a Compaq Presario CQ60. The screen doesn't seem to work. When I turn on the laptop

    the screen remains black. No start-up screen, nothing.

    I can't go into the bios, because I have no screen. The screen remains black.

    The hard drive seems to work and all other functions seem to work but I don't know because I don't have any screen.

    Is this a known problem with the Compaq Presario CQ60?

    How can I solve this problem?

    Thank you

    It seems that the Board needs to be replaced.

    Your laptop is still under warranty?

    If Yes please contact HP. How to do?
    Click on the link below and choose your country:
    Contact HP worldwide

    If this isn't the case, then you can visit any service laptop to solve this problem.

  • How can I reset a compaq presario cq60-211dx

    How can I reset a compaq presario cq60-211dx to factory settings to remove password...  My son put a password in order to prevent his brother to use his computer... the screen broke and we ended up buying another computer... but now, we have fixed this one, but we tried every password we could think, but no luck... a computer repair technician told me the only way to bypass the password is to reset the computer to factory settings... How can I do this?

    Hello

    Please find the link given could help you resolve your problem.

    Restore the PC to its original state by using the f11 key


  • How much ram is on a HP Compaq Presario CQ60

    HI - the amount of RAM is native on a Compaq Presario CQ60 HP? How much he will have in total? I wait to see how much RAM is on my laptop? Thank you, Jane

    When you request support, please provide the model name and product number complete (p/n) of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

    The information requested above are on the bottom of your computer, inside the battery compartment or on the BIOS boot screen. Please see How can I find my model number or product number? for help more to find this information. DO NOT include your serial number. Please enter the product/model information consumer HP Online Support page and post it here for our review.

    Please see computer Hope - determination of the amount of RAM is installed and available to determine the amount of RAM installed on your computer.

    If you have any other questions, feel free to ask.

    Please click the 'Thumbs Up' white LAURELS to show your appreciation

  • Compaq Presario CQ60: Do not connect computer user

    cannot get into my laptop.

    Turn on computer and upcoming stops: the user profile service has not the log on.

    User profile cannot be loaded.

    Thanks for any help that can be provided.

    Hi @doublesix66 ,

    Thank you for visiting the Forums HP's Support and welcome. It's a great site for information and questions. I looked in your question about your Compaq Presario CQ60-210US laptop and receiving a message from the user profile service failed the log on. Here is a fix for it from Microsoft. It seems that the profile you are trying to connect to a file corrupted in it.

    You can do a System Restore. System Restore will help if something is automatically updated and wasn't on the laptop. This helps others correct this error message.

    When running a system restore note remove all USB devices. Disconnect all non-essential devices because they can cause problems.

    I hope this helps.

    Thank you.

  • Laptop Compaq Presario CQ60-300SO - how to make HDMI work with Win 7

    I've upgraded to Windows 7 from XP.

    I connect the HDMI cable to my TV.
    The PC displays both screens, but there is no signals reaching the TV.
    I uninstalled the software of the graphics card and let the Win Update to find the driver. Same results.

    Here's my setup.

    How to make it work? It works very well with a VGA cable. And I tried many televisions.

    Martin

    _________________________________________________________________

    Name of the operating system Microsoft Windows 7 Enterprise
    Version 6.1.7601 Service Pack 1 Build 7601
    Another Description of the OS is not available
    Manufacturer of operating system Microsoft Corporation
    Name of the MARTSHP system
    System manufacturer Hewlett-Packard
    System model Compaq Presario CQ60 Notebook PC
    System Type X 86-based PC
    Processor AMD Sempron (TM) TR-42, 2100 Mhz, 1 Lossnay, 1 logical processors
    BIOS Version/Date Hewlett-Packard F.54, 18.08.2009
    SMBIOS Version 2.4
    Windows directory C:\Windows
    System directory C:\Windows\system32
    Boot Device \Device\HarddiskVolume1
    The local United States
    Hardware Abstraction Layer Version = "6.1.7601.17514".
    MartsHP\Administrator user name
    Zone schedule Southeast Asia standard time
    Physical memory (RAM) 4.00 GB
    Total physical memory 2.75 GB
    1.60 GB available physical memory
    5.50 GB total virtual memory
    4.13 GB available virtual memory

    Hi realpommy. If you encounter problems with HDMI output and let Windows determine the pilots, who could be part of the issue.  First of all try to install these Windows 7 drivers provided by HP for your laptop: NVIDIA nForce Chipset MCP77MV graphics drivers

    After installation and reboot, if you still have problems with video output look in Device Manager, to ensure that there is no error, or "unknown devices".  The section "Understanding of the symbols of error Device Manager" in this document:
    Information from the Device Manager in Windows 7 to illustrate some possible errors.

    If there is no error in Device Manager, do through these documents for more information and the last for troubleshooting ideas:
    Connection of a monitor, projector or a TV (Windows 7)
    Overview of HDMI and DVI for PC connections

    HDMI display resolution and problems of his (Windows 7 and Vista)

    Let me know if it helps.

  • I have a compaq presario cq60 with vista which was able to start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. What can I do?

    I have a compaq presario cq60 with vista. Could not start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. I took the hard drive and installed in my office. Windows Explorer displays the main and recovery partitions.

    The primary partition has the following folders (including hidden & system)

    The recovery partition has the following (including the language files more)

    Someone at - it ideas why my laptop does not work?

    Thank you

    Greg

    Hello

    You press F11 on startup with a HP Compaq to start the recovery process.

    For problems with the recovery process, you will need to contact HP.

    BIOS problems:

    There are messages for the HP Forums for posters with similar errors:

    http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/notebook-HDD-problems-TEst-status-1-07-fail/TD-p/658902

    http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-dv8000-getting-1-07-fail-error/TD-p/883284

    http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-notebook-dv6000-1-07-fail/TD-p/1069457

    All the answers it point to a drive about to fail

    See you soon.

  • No picture on vimicro Webcam vc0303 on compaq presario cq60-420us equipped of Windows Vista

    It is a compaq presario cq60-420us with windows vista.i intalled wabcam software, camrer is vimicro vc0303.it webcam work proporly, but still pinning, no image saids.

    Original title: it's a compaq presario cq60-420us with windows vista.i intalled wabcam software's camrer vimicro vc0303.it webcam work proporly, but still pinning, no image saids

    Hello

    Method 1: I suggest to install the driver for the camera from the link and check if that helps.

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=3979087&

    For your reference: Tips for solving common driver problems:

    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

    Hope this information is useful.

  • Compaq Presario CQ60-425SL: recharge the battery but the laptop does not start

    Hi, I tried to clean my laptop fan, because on the CPU temperatures up to 90 degrees Celsius. But after the opening of the laptop, clean the fan and put all the pieces together again once, it does not start. The led near the power cord plug is on, and the other indicating that the battery is also on. But when I press the power button / nothing happens. All cables and screws are in the right place. Model of the laptop Presario CQ60-425SL. Thank you!

    @georgedragan,

    Hello and thanks for the display on the HP support forums.  Here is the link to your maintenance and service guide.  What you can do, is use to open the new system and each point using the guide to make sure that everything goes back together in the right place.

    Compaq Presario CQ60 Notebook PC HP G60 Notebook PC Maintenance and Service Guide

    If you still experience problems at this time where the only option would be to contact HP support for service options.

    Use the following link to contact the correct service.

    Connect with the HP Support

    Please let me know how things are going.  Thanks again for posting and have a great day.

  • Which hard drive do I need for my compaq presario CQ60

    which hardd drive do I need for my Compaq Presario CQ60? And where would be a good place to try to get a quality for a lower price? Thanks advance.

    Hello

    The player at the link below is an example of one that would be great for your laptop computer, as long as it's the same capacity or larger than your current HARD drive.

    Hard drive 320 GB

    The procedure to replace the hard drive is detailed from Page 51 in your & Maintenance Guide.

    Once this is done, simply use your recovery DVD to reinstall the operating system on the new drive.

    If you do not have your recovery discs, you can order a replacement set using the link below.

    Order HP recovery disks.

    If you have a problem with this link, order them directly from HP.

    If you live in the United States, contact HP here.

    If you are in another part of the world, begin here.

    Kind regards

    DP - K

Maybe you are looking for

  • change the firefox icon in the address bar

    I try to customize firefox to look like IE, don't ask why, believe me, I don't want. Anyway, I downloaded FoxE9, that customizes a bit look like ie9, which I think it's the closest I'm going to Firefox. Only problem Im crossing is the firefox icon th

  • Is it recommended to install anti virus on my new iMac?

    New iMac, I wonder if it is recommended to install internet security software, as I have always done on PC?

  • Problems with drivers Vista on Satellite M100 (PSMA1E)

    HelloI had problems with the installation of the Vista Driver for the graphics card and Realtek sound card.I downloaded the drivers from the Toshiba Support side! The driver Realtek couldn t be installed due to some missing file! Would´nt CCC run cor

  • How to check if DAQmx device is connected?

    Hello I want to measure 2 channels of Daqmx USB-6211 permanently. If I want to write USB-6211, I do anywhere in the variable global project "Authorization of the usb-6211" false and do not measure anything, just write (value of the magnetic field, fo

  • Exchange Server components (ForwardSyncDaemon & ProvisiongRps)

    Hi all I was wondering if someone could give me more information about server components ForwardSyncDaemon & ProvisiongRps Department. I have found that these components are inactive by default (http://clintboessen.blogspot.be/2015/10/exchange-2013-4