BSOD consistent when you use the Healing Brush

Similar Questions

• Lightroom CC gel when you use the adjustment brush

  I recently discovered the power of the adjustment brush for Dodge & burn my RAW photos. I am progressing through a photo editing however, my Mac gets slower and hangs with the beach ball. I upgraded my RAM from 8 to 16 GB and updated from a disk to a 1 TB SSD HARD 750Gig, but it always crashes when I get into an editing tool. My computer is a MacBook Pro 13 "(mi-2012), processor: 2.9 GHz Intel Core i7, memory: 16 GB 1600 MHz DDR3, graphics: Intel HD Graphics 4000 1536 MB." In the Lightroom preferences, running, I get an error message when I click use GPU: "acceleration of the graphics processor has been disabled due to errors. Everyone knows about this problem? It drives me crazy. Surely I don't have to buy a new, more powerful Mac just to use the adjustment brush properly?

  This slowdown/gel is a known problem with make a lot of adjustments and/or healing spot on a single photo.

  There are a number of possible remedies

  1. Get a faster CPU (speed of the car and the amount of memory and power of the graphics card will not affect this problem)
  2. All of your brushing and/or spot as the next step in the last edition and the last step, the healing light up any correction of lens (if desired)
  3. Make the brush in Photoshop Elements or Photoshop

• Flash Pro CC crash when you use the pencil, Brush tool

  Hello

  I bought the full package of CC and installed Flash Pro CC today on my laptop (lenovo y50) and im getting crashes when I use pencil and Brush tool.

  When I use the selection tool the selection is not in the right place. program feels weird.

  IM using latest version

  running windows 8.1

  lastest flash and air and graphics drivers.

  IT hangs just does not show even a mistake just benggg has stopped working.

  Can someone help me?

  Greatzz

  solved

  I was having the same problem and found the solution from Adobe.

  Go to the Control Panel - hardware and audio - display-

  change the size of the text for the smallest a 100%

  Restart the OS and start adobe flash

  I hope this will help you

• compensation to the previous settings when you use the adjustment brush

  I want to add sharpening to the eyes on a photo, so I take the adjustment brush, although there are a lot of settings across the panels that have parameters. I try to click again to make a new brush through the previous settings are still there and if I start painting it is also change of exposure, etc.. What is the best way to reset all the previous settings without changing anything in my image? In other words, I don't want to erase any setting that I've already applied to the image at the new adjustment brush.

  Thanks for any info.

  As soon as you click on new, just double-click on the word effect upward the adjustment panel brush. Which resets everything in the adjustment brush. But since you have chosen again, it will have no effect on your previous brush.

• When you use the Brush tool, it always comes back to the single stroke and no fill. How can I fix it? I have already disabled the new art of a choice of the basic look.

  When you use the Brush tool, it always comes back to the single stroke and no fill. How can I fix it? I have already disabled the new art of a choice of the basic look.

  Double-click on the Brush tool and you will see important option.

  Please also read the manual on the other options.

• When you use the brush in the development module and I have a lot less brushes to create an image, the program hangs up to what I sometimes have to use windows to complete the task.  I have ICC Intel i7 3.4 and 16 GB of RAM to operate Windows 7.  Why hang

  When you use the brush in the development module and I have a lot less brushes to create an image, the program hangs up to what I sometimes have to use windows to complete the task.  I have ICC Intel i7 3.4 and 16 GB of RAM to operate Windows 7.  Why hang up LR

  Doing a lot of brushing up on an image using Lightroom is known to have this problem. The first thing to try is to turn off the graphics acceleration (go to Preferences/Performance tab and then uncheck the box here). IF this does not help, then you can consider doing your brush in Photoshop Elements or Photoshop, instead of brushing in Lightroom.

• I'm under 11 items on Windows 8.  When I use the healing tool, the entire picture moves with the cursor.  How can I fix it?  Thank you!

  I'm under 11 items on Windows 8.  When I use the healing tool, the entire picture moves with the cursor.  How can I fix it?  Thank you!

  Worked like a charm.  Can't thank you enough, R Kelly!

  Ken

• MainStage "lag" when you use the SPACEBAR as 'play '.

  Hi all, I'm relatively new to Mainstage (V3), and I'm hoping to use it for the first time this weekend to play the extra backing with a band tracks

  The issue I'm having, is that with the SPACEBAR of laptops on 'PLAY '. It is often "lag". or simply does not start the song. I have to wait a second, then hit again, it will work.  It is almost as if in Performance mode, when you use the down arrow key to select the next song, the 'focus' is on the list of patch, and if I click in the background where are playback buttons and stop, THEN that will work. I have not, however, been able to reproduce this particular behavior on a consistent basis.

  Everyone knows the same thing? Or why it is so 'all or nothing '?

  And a question important much donor... I gave all my reading titles to the waveform appropriate the other night (so I could visually see the waveforms above the attenuator as offers of backing track model), however, once I was moving songs in a different order, which stopped working. No idea why?

  Thnaks in advance

  About the offset by hitting the space bar, a thought occurred to me.

  How Mainstage allocates 44.1/16 bit wave files used in the reading plug-in? Which means, when a song is selected, which uses, for example, to separate the 5 cases of reading, one can assume that these audio files used in that song would need to "load" first.

  Anyone know if this is how Mainstage works?

• Firefox does not open after the update. Cannot open the profile technical, even when you use the directory in cmd line path

  I'm using Firefox on a Windows 7 computer. Firefox does not open after the last update. I read the help articles and it seems that I need to create a new profile because my settings were probably corrupted. I'm unable to open the profile technical, even when you use the directory in cmd line path. I tried the following commands in the command line:

  Firefox Pei
  "C:\Program Files (x 86) \Mozilla" PEI

  Nothing happens with every order.

  I am also running Norton Internet Security. I read a help of virtual navigation features Re article that can cause a problem. The article says to check the setting of virtualization in the internet security software and to clear the virtual cache. I went through all the menus of settings in Norton Internet Security version 21.6.0.32 and I don't see anything that looked like in "virtualization" settings, so I guess that does not apply to me. "

  If you have any ideas, I had appreaciate that your expertise!

  Hello arcandl, at the launch of the firefox is not after you double-click the shortcut, it is sometimes also a sign of active malware on a system.
  you might want to try running a scan with some various other security like the free version of malwarebytes and adwcleaner tools that are specialized to remove the adware and browser hijackers.

  Fix Firefox problems caused by malicious software

• How to enter the character ü when you use the pinyin keyboard?

  How can I enter the character u when you use the pinyin-simplified keyboard, for example, for the opening of the syllable nu with your 3.

  The keyboard pinyin-simplified is for entering the characters han, not latin.  If you want to type the latin pinyin, you must use the extended ABC keyboard configuration.  A list of the shortcuts is to

  http://symbolcodes.TLT.PSU.edu/accents/codemacext.html

• Is cell required when you use the map applications of conduct?

  Is cell required when you use the map applications of conduct?

  Yes. GPS does not work with a Wi - Fi connection.

• WHEN YOU USE THE CONSTRUCTOR OF MY SITE, I CAN'T COPY AND PASTE WROTE THE BROWSER SECURITY SETTINGS HOW TO NOT CHANGE THESE FOR ME TO COPY / PASTE?

  WHEN YOU USE THE CONSTRUCTOR OF MY SITE, I CAN'T COPY AND PASTE WROTE THE BROWSER SECURITY SETTINGS HOW TO NOT CHANGE THESE FOR ME TO COPY / PASTE?

  https://support.Mozilla.com/en-us/KB/granting+JavaScript+access+to+the+Clipboard

  This extension will help you implement the security policies for access to the Clipboard.
  
  Allow the extended Clipboard support:
  
  https://addons.Mozilla.org/en-us/Firefox/addon/852

• Tecra M5 - crashes when you use the docking station - fan at full power but no start the thread

  Hi all

  As I say, I have intermittent problems where the machine crashes when you use the docking station. Sometimes at the beginning of the startup of windows then stalls and powers of fan at full power. If I take off the base of the machine, it works fine.

  I bought this machine because I had one in my previous job and he had found great. However, my only previous also had this problem sometimes when lashing...

  Any assistance received very warmly.

  Thank you!

  Hello

  Stand by. You have noticed this behavior when the laptop is OFF, connect to the docking station and after doing this you turn. Am wrong me or have I misunderstood something?

  Maybe's external screen connected to the docking station?

• M40X-141: black screen when you use the WiFi network

  Since I bought my M40X 141 in July 2005, I got black screen frequently when you use the wifi.

  You know this black screen with typical noise from the hard drive.

  I did all the updates without effect. The local seller understood nothing black screen, associated with the use of wifi.

  In the XP world, nobody seems to find this kind of abnormal things so I'm desperate to find a solution to stop the frequent black screens. Recently try a usb dlink wifi dongle (dwl-G122) the constant flow of black screens disappeared
  (An Xp session 10 days was previously impossible).

  Now, I know this is a bug in the original software and I try desespartely to find a patch or updated driver or professional advice.

  Is there someone here who can help a tired multi restart man to use his laptop with the original material?

  Your laptop should still be guaranteed if you bought in June 2005. Take it to your authorized Service Provider nearest and have their say. They should already provide for a procedure for this and know what to do. Sure the frequency that uses WIFI and display inverter coincides, and you get the black screen. Change them should fix this problem.

• Satellite A500-1GL: it is advisable to remove the battery when you use the network

  I know this is a silly question but its actually something I know not so thought I would ask.

  I almost always plug my laptop into the supply line (satellite a500 1gl)
  I was wondering have you actually keep the battery installed even when using the electrical network.
  Or is it really advisable to remove the battery when you use the network?
  I didn't know if the battery should always be in place.
  Thanks for your help
  Torti

  Hello

  A few years ago it was recommended to remove the battery of the laptop if the AC adapter is plugged. What keeps the constant charge battery
  New age of batteries are better you can leave the battery in the Bay it s ok and it should not affect the performance

  However, sooner or later each battery would die it s only a matter of time, you know