BSOD iusb3xhc.sys

Similar Questions

• 41 DRIVER_IRQL_NOT_LESS_OR_EQUAL BSOD (iusb3xhc.sys) since February

  Hello. I had to deal with these BSODs for a long time now. They often occur when the computer is waking up from his sleep.

  I tried a number of things:

  Moving all my usb ports USB 2.0 devices

  Remove all devices (except keyboard and mouse)

  Reinstall the latest usb drivers intel

  I'm out clues, and I'd love that someone diving deep with me to resolve this problem. The system is only 2 years old:

  ASUS Z - 97A

  Intel i5-4590 Haswell 3.3 GHz

  Corsair CMZ8GX3M2A 2 x 4 GB

  Here's where I've been posting about this, with not much help in these communities:

  http://www.SevenForums.com/BSOD-help-support/392338-BSOD-wake-sleep-iusb3xhc-sys-ffusb2audio-sys.html

  http://www.TechSpot.com/community/topics/BSOD-wake-from-sleep-iusb3xhc-sys-ffusb2audio-sys.224329/

  Hello

  If the most recent version of the driver did not work, you can download the older version of the driver from the manufacturer's Web site for your and check if it helps.

  Let us know how it goes.

• BSOD Fltmgr.sys, overclock, no .dmp files win7

  Hello

  I searched and read several threads that would solve these problems, but I might be too dumb to understand, what I'm supposed to do, so I ask for your help.

  For a long time (over 4 years), I've known problems of occasional graphics drivers, where the driver just stopped working, but he always managed to restart what it itself, so I didn't bother from time to time.

  Lately, but I got a lot of blue screens and failure to start my computer (it crashes at startup), and I don't know why, all of a sudden happens or if he could have mentioned something to do with the old graphic problem.

  Blue screens, I had sometimes tell me something different:

  -fltmgr.sys works not properly

  -SYSTEM_SERVICE_EXCEPTION.

  -"a holding operation, attachment process, or yield was attempted to a DPC routine."

  -PAGE_FAULT_IN_NONPAGED_AREA

  -IRQL_NOT_LESS_OR_EQUAL

  Sometimes the word computer: "System has experienced failures starting due to the overclocking." And I don't know anything about overclocking or how to enable or disable.

  I ran the test I could think. Test the RAM, disk hard test and whatnot, but it doesn't seem to help me, and above all my computer does not seem to make the dump files (the folder is empty) even though I made sure the settings has been correct (nucleus of 256 k, systemroot%/minidump %).

  I feel lost on what to do, and I'm willing to try anything. I am now in safe mode in fear of a bsod. They appear generally within 5-20 minutes after the start.

  I downloaded a few files I think could be useful in a folder in google reader:

  https://drive.Google.com/open?ID=0ByCVGAbKrY3tcHR4aHF4ZUFsWm8

  The info.txt system is in my own language (Danish), but I don't know how to make an English version.

  I'm using Windows 7 Home Edition

  Version 6.1.7601 Service Pack 1 Build 7601
  Gigabyte Technology Co., Ltd. system producer.

  GA-770TA-UD3 system model

  PC x 64 SystemType
  Processor AMD Athlon (TM) II X 4 965 processor, 3415 Mhz, 4 Kerné (r), 4 Logisk (e) processor (er)
  Award BIOS-version/dato Software International, Inc. F1, 19/11/2009
  SMBIOS version 2.4

  Thank you for your help. I would like to know how to give you more information. Thank you.

  Kind regards

  Emil

  Well the most recent crash was on iusb3xhc.sys again.  Completely remove you the last time?  The current driver is dated 2012 and I suspect that there is a newer driver.  You will need to check with Intel (the developer).

  I am happy to continue to do that with you, but at some point, you can do a clean install of the operating system.  You can also contact Sibelius to see if there are updates, patches, etc.

  I still don't know that it's JUST the music notation software, in fact if she is at all.

• BSOD - usbhub.sys

  Hello!

  I bought a g505s and I have upgraded to Windows 8.1. Sometimes I get bsod usbhub.sys related.

  Here is my production of windbg:

  Microsoft (R) Windows debug 6.3.9600.16384 AMD64 Version
  
  Copyright (c) Microsoft Corporation. All rights reserved.
  
  Loading dump file [C:\Windows\MEMORY. DMP]
  
  The Bitmap core dump file: the single kernel address space is available
  Symbol of validation of the path summary *.
  
  Response                         time (ms)     location
  
  Report                                       srv*c:\symbols*msdl.microsoft.com/download/symbols
  
  Symbol search path is: srv*c:\symbols*msdl.microsoft.com/download/symbols
  
  Executable search path is:
  
  Windows 8 Kernel Version 9600 MP (4 procs) free x 64
  
  Product: WinNt, suite: TerminalServer SingleUserTS
  
  By: 9600.16452.amd64fre.winblue_gdr.131030 - 1505
  
  Computer name:
  
  Core = 0xfffff801 'e121c000 PsLoadedModuleList = 0xfffff801' e14e0990
  
  The debugging session: Sun Jan  5 2014 12:09:45.020 (UTC + 02:00)
  
  System Uptime: 2 days 1:33:11.375
  
  Loading the kernel symbols
  
  ...............................................................
  
  ................................................................
  
  ............................................
  
  Loading user symbols
  Loading unloaded module list
  
  ....................................
  
  *******************************************************************************
  
  *                                                                             *
  
  *                        Bugcheck analysis                                    *.
  
  *                                                                             *
  
  *******************************************************************************
  Use! analyze - v to obtain detailed debugging information.
  9F error checking, {3, ffffe00002dc8060, fffff801e2be3840, ffffe0000276eb80}
  Probably caused by: usbhub.sys
  Follow-up: MachineOwner
  
  ---------
  0: kd >! analyze - v
  
  *******************************************************************************
  
  *                                                                             *
  
  *                        Bugcheck analysis                                    *.
  
  *                                                                             *
  
  *******************************************************************************
  DRIVER_POWER_STATE_FAILURE (9f)
  
  A pilot was not a power of the PRI ends in a moment.
  
  Arguments:
  
  Arg1: 0000000000000003, a device object has been blocking an Irp for too long
  
  Arg2: ffffe00002dc8060, physical device from the stack object
  
  Arg3: fffff801e2be3840, nt! TRIAGE_9F_POWER on Win7 and higher, otherwise the functional device object of the stack
  
  Arg4: ffffe0000276eb80, blocked IRP
  Debugging information:
  
  ------------------
  DRVPOWERSTATE_SUBCODE:  3
  Nom_image:  usbhub.sys
  DEBUG_FLR_IMAGE_TIMESTAMP:  5215f839
  MODULE_NAME: usbhub
  FAULTING_MODULE: fffff8000300f000 usbhub
  DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
  BUGCHECK_STR:  0x9F
  Nom_processus:  System
  CURRENT_IRQL:  2
  ANALYSIS_VERSION: 6.3.9600.16384 (debuggers (dbg). 130821-1623) amd64fre
  DPC_STACK_BASE:  FFFFF801E2BEBFB0
  STACK_TEXT:
  
  fffff801 'e2be3808 fffff801' e14131a6: 00000000' 0000009f 00000000'00000003 ffffe000 '02dc8060 fffff801' e2be3840: nt! KeBugCheckEx
  
  ' fffff801 'e2be3810 fffff801' e14130c6: ffffe000 ' 07968650 00000000' e9f181f0 00000000 00000003' fffff801 ' e1278a04: nt! PopIrpWatchdogBugcheck + 0xde
  
  ' fffff801 'e2be3870 fffff801' e12c9f64: ffffe000 ' 07968688 fffff801 ' e2be3939 ffffe000'079686 c 8 00000000'00000002: nt! PopIrpWatchdog + 0x32
  
  ' fffff801 'e2be38c0 fffff801' e12ca478: 00000000 ' 00000001 ffffe000 ' a 0238, 748 fffff801 'e150a180 fffff801' e150e0c0: nt! KiProcessExpiredTimerList + 0x1d8
  
  fffff801 'e2be39a0 fffff801' e1326478: fffff801 'e150a180 00000000' 001f3bea 00000000' 0067 d 662 00000000' 0067d67a: nt! KiExpireTimerTable + 0 x 218
  
  ' fffff801 'e2be3a40 fffff801' e1276abc: ffffe000 00000000' 00001f80 ' 0000019f 00000001 ' 598dfbd6 00000000'00000002: nt! KiTimerExpiration + 0 x 148
  
  fffff801 'e2be3af0 fffff801' e136d7ea: fffff801'e150a180 fffff801 'e150a180 00000000' 001a3fc0 fffff801' e1562a80: nt! KiRetireDpcList + 0x19c

  
  fffff801'e2be3c60 00000000' 00000000: fffff801 'e2be4000 fffff801' e2bdd000 00000000'00000000 00000000'00000000: nt! KiIdleLoop + 0x5a

  STACK_COMMAND: kb

  FOLLOWUP_NAME: MachineOwner

  IMAGE_VERSION: 6.3.9600.16384

  FAILURE_BUCKET_ID: 0x9F_3_btfilter_IMAGE_usbhub.sys

  BUCKET_ID: 0x9F_3_btfilter_IMAGE_usbhub.sys

  ANALYSIS_SOURCE: KM

  FAILURE_ID_HASH_STRING: km:0x9f_3_btfilter_image_usbhub.sys

  FAILURE_ID_HASH: {e32271a1-eb13-6913-1626-4c8d704b5d5a}

  Follow-up: MachineOwner
  ---------

  Any advance-help would be appreciated.

  Thank you

  I'll try to reinstall my bluetooth drivers...

• Satellite A660-1CJ - 8.1 Windows crashes - BSOD bridge.sys

  Hello

  I have a Satelite A660-1CJ, running Windows 8.1 and he already broke 5 times with a BSOD:
  DRIVER_IRQL_NOT_LESS_OR_EQUAL (bridge.sys)

  What can I do?

  Hello

  It seems that the bridge.sys is causing the BSOD.
  Bridge.sys is a Windows system component.

  Toshiba says that the Windows 8.1 is not supported on Satellite A660 series.
  What does that mean?
  This means that Windows 8.1 drivers are not released by Toshiba.

  I assume that you have installed drivers in your own hand and probably one of the drivers causing the BSOD.

• Skype install causes a BSOD ks.sys Crash

  Hi Forum

  Skype worked perfectly then there was an upgrade, soon as I got a BSOD casued by the ks.sys file.

  Tried everything, including totally reformatting my HARD drive and reinstall Windows 8 etc.

  Reinstalled Skype and it BSOD once again, at my wits end can someone please help.

  HP Pavilion g4

  Processor Dual-Core AMD Turion II P560

  4 GB OF RAM

  ATI Mobility Radeon HD 4200 Series

  HP HD webcam

  Thank you

  The latest versions of Skype 6.16/6.18 do not work well with the webcam HP HD Webcam [ch].

  http://community.Skype.com/T5/Windows-desktop-client/Skype-6-18-update-error-BSOD/m-p/3422699#M28779...

  Try to uninstall the currently installed version of Skype and install the older version of Skype 6.14.0.104:

  http://download.Skype.com/MSI/SkypeSetup_6.14.0.104.msi

• Service exception C50-A-157 - BSOD - (Netio.sys) satellite system

  Hi, I recently had random stops, and I got this error message.

  Service system (Netio.sys) exception

  Any help would be appreciated.

  NetIO.sys file belongs to the the network driver, which is part of the Windows System.

  In some cases of different network applications, antivirus and firewall software may cause this show NetIO.sys BSOD.
  You have probably a program installed that may cause problems with your network connection.

  For example: program NVIDIA Network Access Manager. This software is available during the installation of NVIDIA network adapter drivers.
  But as far as I know this laptop doesn't support nVidia GPU... so it should not be installed on your system...

  However... Check if the NVIDIA Network Access Manager software or other network software is installed... and if possible to uninstall this kind of software using the option "uninstall a program".

• Satellite L70-B-12 t - BSOD, atikmpag.sys everything at stake

  Whenever I try to play a game amd driver crashes or I get bsoded (atikmpag.sys).
  Some days he arrives just after I start the laptop and other computer after several hours of use or one or two hours of play.

  I tried everything on x 64 (OEM) home win8 and win 7 pro x 64.
  All included:
  -Updated graphics drivers Intel (auto-updater invited me to use toshibas pilot)
  -Used Toshibas drivers.
  -Used pilots later and beta AMD.

  -All Windows and the graphics card settings are on performance.

  Disabled - all energy saving relevant options I could find.

  -Tried several times, extraction - replace manually, to solve atikmpag bsod without change. I get this error message 1 x per day minimum.

  The games I tried, and make the bad are:
  -Sniper Elite 3 (driver crashes and recover successfully)
  -Archage (each graphic parameter is at least and I keep crashing, bsoding my permit hang right after that I connect to the game)
  -Tera: here I can actually log on settings low (+ lotsa .ini tweaking) but I get randomly driver hang of the thing even once and the rare bsod.
  And these are the only games I've tried on this laptop so far

  Normal computer 3DMark test: Bsod when generates the report.
  3DMark mid range gaming pc test: driver hangs on the 1st video and never recovers.
  Plan to run another Tester stress but also that i'm definatelly of ideas on how to keep this troubleshooting.

  Thanks in advance!

  For me, it looks like a RAM problem as did mistake place in different situations at different times.
  So it could be a LITTLE unstable in memory / RAM.
  Download memtest86 and let pass the test for a longer period. Most of the problems a RAM / errors will be caught in the 1st run, some on the 2nd or 3rd.

• Qosmio G50 - 10 H - I get BSOD usbvideo.sys

  I have the Qosmio G50 - 10H.

  Sometimes I get a BSOD indicating a problem with usbvideo.sys.
  Does anyone have any ideas as to what could be the problem.

  A search of my files, including hidden files, shows no version of this file on my laptop.

  Thank you

  Hello

  The USBVIDEO. SYS driver is part of the Windows operating system and it of a Microsoft driver.
  I don't very well why this disc is causing the BSOD, but it is advisable to clean the operating system and registry run CCleaner and upgrade the OS to the latest state of m!

  In the worst case we could recommend recover the operating system by using Toshiba drives.

  Welcome them

• Satellite L650 1LN - BSOD, atikmpag.sys error

  Hello

  I'm from Italy,
  I have a problem with my laptop (operating system, WINDOWS 7).

  After a while I use the laptop, I get an error: the AMD display driver has stopped working and has been restored.
  Shortly after this awful blue screen appears with the error "atikmpag.sys."

  I tried to restore my laptop, but I still have the same error.
  I also tried to install the updated drivers Catalyst, but I install it on my laptop.

  How can I fix it?
  You have a guide to follow step by step?

  Thank you all! Alex.

  Hello

  The error message indicates a problem with the chip of the graphics card or graphics card driver.
  BSOD may occur if the graphic temperature would be too high, it might lead to chart falls down and BSOD.

  I think you should follow the advice of s Ilay and should reinstall or update the graphics driver.
  The old driver must be removed before you begin the new installation.
  In case this does not improve the functionality, I recommend you to perform a complete system recovery.

  Hope that this would finally solve the problems.

• HP 250 G3: BSOD - netr28x.sys (MediaTek 802.11 Wireless Adapter Driver, MediaTek Inc.)

  I recently bought the HP 250 G3 without OS laptop.
  
  I installed Win 7 pro 64 bit and all the missing drivers, which now seem to be up to date.
  I made my machine run all night to check synchronize files on dropbox and google reader, but this morning, I realized crashes BSOD occurred 9 times.
  
  So I download WhoCrashed which identified the main cause of the system down to be:
  
  netr28x.sys (MediaTek 802.11 Wireless Adapter Driver, MediaTek Inc.)

  WhoCrashed strongly recommend checking the updates for this driver.
  Can anyone suggest me how to upgrade?
  Thanks in advance.

  I fixed my problem 8.1 WIndows installation on my laptop.
  I have not had any crash since I installed it, which was 5 days ago.
  I gather that some drivers HP for Windows 7 dindn can't work properly.

• BSOD: athr.sys/DRIVER_IRQL_NOT_LESS_OR_EQUAL

  Hey! I get a BSOD/stop message sometimes, unregulary. Whenever he came, I use the wireless connection. I googled athr.sys, and I am absolutely sure this is the dor my card an Atheros AR5007 wireless driver. I found a couple of guys from Lenovo, which took the same or almost the same problem with athr.sys. So, looks like a problem with the driver.

  I use the driver version 7.7.0.199, which is the last on the HP driver download site. I found the most recent drivers, but not on site HP or Atheros (which does not have all the drivers at all..), but no official, www.atheros.cz sites and opendrivers.com. But given that these websites seem a little easy and are not the official websites, I have not tried one of these... In addition, I tried to download a driver of opendrivers I think, but there was no installation file, just the .sys files.

  So, in total, I've known 9 accidents so far, some using Firefox, some online games and use Spotify. If you want me to post the minidump files (.dmp) I can do... But for the time being. Only, I'll post a picture of the BSOD...

  I use Windows Vista SP2 (updated 2 days ago, had at least one accident after), on a HP Pavilion dv5 1103-el, who was released from Italia and then sold here in Sweden.

  The picture of the BSOD is here:http://img197.imageshack.us/img197/5238/dsc04289u.jpg

  Message edited by rhubarbpie on 08/23/2009 04:06
  /rhubarbpie

  Hello

  Uninstall your current driver and restart your system.

  Download and install the version of the 8.0.0.171 driver here.

• HP Envy Ultrabook 6 t-1000 BSOD - iaStor.sys

  As I was using my laptop, I noticed that the antivirus software, Malwarebytes, asked that I had to restart my laptop. So not much and I restarted. Now, whenever I turn it on it gives me two options: '(recommended launch Startup Repair' and 'Start Windows normally'. If I choose 'Launch Startup Repair', it brings me straight to the BSOD. If I choose "Start Windows normally", it takes back me to two options. Now, I tried to go to three different types of Modes safe, but just brought me two choices of before which leads to the BSOD. The BSOD said:

  STOP: 0X0000007E (0XFFFFF88001681026, 0XFFFFF88002F499E8, 0XFFFFFFFFC000005, 0XFFFFF88002F49240)

  isStor.sys - address FFFFF88001681026 base at FFFFF8800163A000, DateStamp 4ed5a567

  PLEASE HELP ME! I AM IN DESPERATE NEED! I literally just go this laptop.

  You have run HARD drive Diagnostics in the Diagnostic Menu advanced HP?

  Press the power button and immediately start receiving the Esc key. In the menu that appears, select the F2 key to see the HP Advanced Diagnostics menu, and then click the hard drive test. If the test fails, then contact the for a replacement hard drive warranty if you feel comfortable with to replace yourself. Otherwise ask the Customer Service on how to send it in for warranty repair.

• BSOD, klim6.sys, tdx.sys - dump file

  OS: Windows Vista Home Premium (32 bit)
  Cell phone brand / model: Acer Aspire 4930
  Processor: Intel Core 2 Duo 2 GHz
  RAM: 3 GB
  Anti Virus: Kaspersky AntiVirus 2009 (8.0.0.506)

  Problem: BSOD a few times (at random times) - pointing to tdx.sys problem

  Troubleshooting done so far:

  Follow-up http://support.microsoft.com/kb/315263 to use WinDBG to read crash dump files. The analysis of dump in WinDBG output is displayed under my immediate questions - thanks in advance! :

  1. is the problem because tdx.sys (legacy driver problem) or klim6.sys (Kaspersky)?
  2. If it is due to klim6.sys - should I uninstall Kaspersky?
  3. If it is due to tdx.sys - which of the following hotfix should I apply?
  (a) http://support.microsoft.com/default.aspx/kb/967891
  (b) http://support.microsoft.com/kb/934611
  4. the patch will present other bugs?

  Output of WinDBG Crash Dump Analysis:
  Debug version of Microsoft Windows (R) 6.11.0001.404 X 86
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading file Dump [c:\windows\minidump\Mini050209-01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  ATTENTION: Inaccessible path: "c:\windows\i386".
  Symbol search path is: srv * c:\symbols* http://msdl.microsoft.com/download/symbols
  Executable search path is: c:\windows\i386
  Windows Server 2008/Windows Vista Kernel Version 6001 (Service Pack 1) MP (2 processors) free x 86 compatible
  Product: WinNt, suite: TerminalServer personal TerminalServer
  By: 6001.18226.x86fre.vistasp1_gdr.090302 - 1506
  Computer name:
  Kernel base = 0x82c38000 PsLoadedModuleList = 0x82d4fc70
  The debugging session: 19:19:44.274 Saturday, may 2, 2009 (GMT + 8)
  System Uptime: 2 days 6:33:50.154
  Loading the kernel symbols
  ...............................................................
  ................................................................
  ...................................
  Loading user symbols
  Loading unloaded module list
  ........
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  BugCheck D1, {38, 2, 1, 9230855d}

  Cannot load the image \SystemRoot\system32\DRIVERS\klim6.sys, 0n2 error Win32
  WARNING: Unable to verify timestamp for klim6.sys
  ERROR: Module load completed but symbols can be loaded for klim6.sys
  Probably caused by: tdx.sys (tdx! TdxSendConnectionTlRequestComplete + 59)

  Follow-up: MachineOwner
  ---------

  0: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
  An attempt was made to access an address pageable (or completely invalid) to a
  application interrupt level (IRQL) that is too high.  It is usually
  caused by drivers using a wrong address.
  If the kernel debugger is available, get a stack backtrace.
  Arguments:
  Arg1: 00000038, referenced memory
  Arg2: 00000002, IRQL
  Arg3: 00000001, value 0 = read operation, 1 = write operation
  Arg4: 9230855d, address which referenced memory

  Debugging information:
  ------------------

  WRITE_ADDRESS: GetPointerFromAddress: unable to read from 82d6f868
  Cannot read MiSystemVaType memory at 82d4f420
  00000038

  CURRENT_IRQL: 2

  FAULTING_IP:
  TDX! TdxSendConnectionTlRequestComplete + 59
  8701 xchg eax, dword ptr [ecx] 9230855d

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

  BUGCHECK_STR: 0XD1

  Nom_processus: System

  TRAP_FRAME: 82d2d358-(.trap 0xffffffff82d2d358)
  ErrCode = 00000002
  EAX = 00000000 ebx = 92311d ecx 16 = 00000038 edx = 00000000 esi = 00000000 edi = 9 c 665760
  EIP = d 9230855 esp = 82d2d3cc ebp = 82d2d3dc iopl = 0 nv up ei pl zr pe nc
  CS = 0008 ss = 0010 ds = 0023're = 0023 fs = 0030 gs = 0000 efl = 00010246
  TDX! TdxSendConnectionTlRequestComplete + 0 x 59:
  9230855d 8701 xchg eax, dword ptr [ecx] ds:0023:00000038 is?
  Reset the default scope

  LAST_CONTROL_TRANSFER: from 9230855d to 82c92d24

  STACK_TEXT:
  82d2d358 badb0d00 d 9230855 82d2d37c 00000000 nt! KiTrap0E + 0x2ac
  82d2d3dc 92247d 84 021d0ac0 00000000 00000065 tdx! TdxSendConnectionTlRequestComplete + 0 x 59
  82d2d3fc 922455 has 7 9c7a80b0 9241b 598 d 922 4850 tcpip! TcpCompleteTcbSend + 0x2e
  82d2d454 92244f1b b 9241, 518 0063ba48 82d2d4b8 tcpip! TcpTcbReceive + 0 x 287
  82d2d4ac 92244d 14 9241b 518 00000000 and 00000000 tcpip! TcpMatchReceive + 0x1ec
  82d2d4f4 9241b 518 92245310 92425000 92425010 tcpip! TcpPreValidatedReceive + 0x2b0
  82d2d510 9241b 518 92245913 82d2d54c 92425000 tcpip! TcpReceive + 0x32
  82d2d520 9226ffef 82d2d534 c000023e 00000000 tcpip! TcpNlClientReceiveDatagrams + 0x12
  82d2d54c 9226fdb2 922c6e50 82d2d5a0 c000023e tcpip! IppDeliverListToProtocol + 0 x 49
  82d2d56c 9226fcd9 922c6c68 82d2d5a0 00000006 tcpip! IppProcessDeliverList + 0x2a
  82d2d5c4 9226f4cc 922c6c68 00000000 00000006 tcpip! IppReceiveHeaderBatch + 0x1eb
  82d2d654 9226dfc6 993fd270 82d1b401 00000000 tcpip! IpFlcReceivePackets + 0xbe1
  82d2d6d0 9226e50e 9c63ad70 ac5b46f0 00000000 tcpip! FlpReceiveNonPreValidatedNetBufferListChain + 0x6e3
  82d2d6f8 833520b 0 9c63ad70 ac5b46f0 00000000 tcpip! FlReceiveNetBufferListChain + 0 x 104
  82d2d72c 83344919 0063a9b8 ac5b46f0 00000000 ndis! ndisMIndicateNetBufferListsToOpen + 0xab
  82d2d754 83344890 00000000 9c64b240 9f7d4148 ndis! ndisIndicateSortedNetBufferLists + 0x4a
  82d2d8d0 8328557f 00000000 00000000 ndis 85f22438! ndisMDispatchReceiveNetBufferLists + 0 x 129
  82d2d8ec 832b0d88 85f22438 ac5b46f0 00000000 ndis! ndisMTopReceiveNetBufferLists + 0x2c
  82d2d908 832b0d5f 9c64bc10 ac5b46f0 00000000 ndis! ndisFilterIndicateReceiveNetBufferLists + 0x20
  82d2d924 92bca003 9c64bc10 ac5b46f0 00000000 ndis! NdisFIndicateReceiveNetBufferLists + 0x1b
  WARNING: Information not available stack unwind. Sequence of images may be wrong.
  00000000 00000000 00000000 00000000 00000000 klim6 + 0 x 2003

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  TDX! TdxSendConnectionTlRequestComplete + 59
  8701 xchg eax, dword ptr [ecx] 9230855d

  SYMBOL_STACK_INDEX: 1

  SYMBOL_NAME: tdx! TdxSendConnectionTlRequestComplete + 59

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: tdx

  Nom_image: tdx.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 479190ee

  FAILURE_BUCKET_ID: 0xD1_tdx! TdxSendConnectionTlRequestComplete + 59

  BUCKET_ID: 0xD1_tdx! TdxSendConnectionTlRequestComplete + 59

  Follow-up: MachineOwner
  ---------

  Hello Hanning,

  Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista CD. You can get the well-known files from your dvd to the BONE. Have you this? If this is not the case, try a system restore. If it does not always help let us know that you can download and ISO of here: http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ but the use of this software to burn your ISO. Link: http://download.cnet.com/Active-ISO-Burner/3000-2646_4-10602452.html?tag=mncol, let us know if this allows you to get your drive. Follow the instructions. Let us know whether, if that helps you. Make it a great day!

  "In the end, the love you take, is equal to the Love You Make"

• Problem Windows 7 BSOD NDIS.sys

  I have a problem recurring BSOD but only specific to a particular Dell model laptops.

  I downloaded the file minidump here. In this file, all I could see is reference to the NDIS.sys file. But do not know what to do to solve the problem.

  http://1drv.Ms/1KjvesS

  Can someone please? I've updated my LAN, the wireless drivers. And the problem still persists.

  Help, please

  Hard to tell given that it is build 10532 and there is not a description full for this build yet, BUT it seems to be linked to vna.sys from Check Point Software Technologies.  Yours is dated 2008.  I would remove Check point