Satellite L70-B-12 t - BSOD, atikmpag.sys everything at stake

Similar Questions

• Satellite L650 1LN - BSOD, atikmpag.sys error

  Hello

  I'm from Italy,
  I have a problem with my laptop (operating system, WINDOWS 7).

  After a while I use the laptop, I get an error: the AMD display driver has stopped working and has been restored.
  Shortly after this awful blue screen appears with the error "atikmpag.sys."

  I tried to restore my laptop, but I still have the same error.
  I also tried to install the updated drivers Catalyst, but I install it on my laptop.

  How can I fix it?
  You have a guide to follow step by step?

  Thank you all! Alex.

  Hello

  The error message indicates a problem with the chip of the graphics card or graphics card driver.
  BSOD may occur if the graphic temperature would be too high, it might lead to chart falls down and BSOD.

  I think you should follow the advice of s Ilay and should reinstall or update the graphics driver.
  The old driver must be removed before you begin the new installation.
  In case this does not improve the functionality, I recommend you to perform a complete system recovery.

  Hope that this would finally solve the problems.

• BSOD Atikmpag.sys Elitebook 8560w ati m5950

  Hi all

  I have problems with my Elitebook 8560w. I get the BSOD on startup all the time, when the login screen appears in windows 7. (atikmpag.sys)

  I have tried several things but I can't solve it, the laptop cannot start up if I use the standard vga driver.

  Things I've tried:

  Fresh install Windows 7 x 64, Windows 7 x 86, Windows XP x 64, Windows XP x 86

  Tried all versions of BIOS

  Tried all versions of drivers for video card, both HP and Ati with fres installs Windows.

  It's getting boring, please help me.

  Where can I get the latest version of the video Bios for my m5950? Who can solve my problem.

  Hello hlaca20. I understand that you have a problem with the blue screens that often occur during startup. Is this correct?

  You've tried quite a few steps to solve the problem. I think that the combination of the BIOS update, fresh install multiple operating systems and fresh drivers excluded the majority of software problems. Have you tried to test your equipment?

  If you have not deleted the partition of HP_Tools you can use the built-in tools that provides HP. You should test your memory and the hard disk to determine whether there are problems.

  This document describes how to run the hard drive test. Simply repeat the steps in selection of memory the second time to test the RAM.

  I'm waiting for your answer; have a great day!

• BSOD atikmpag.sys + dxgkrnl.sys + dxgmms1.sys

  Hello

  I started to get this BSOD with these files listed as the culrpits every time at random times at the office or at the game. Computer completely freezes over, then BSOD, then the screen will turn black saying 'no signal '.

  

  Guilty appears to be a hardware failure with the graphics card, but these other two errors have concerned me.

  I did a clean reinstall of drivers for the card and tried the atikmpag.sy expansion patch listed on google but nothing works. Card temp is idling around 40 ° C, even as he always has and I haven't changed or modified the system, he has suddenly started happening.

  Any help would be appreciated!

  SV

  You can have the card ATI and integrated graphics.  If this is the case without the ATI system driver will use the built in graphics.

  The last driver that you should try, it is one of the computer as a machine they tweak sometimes their drivers to work with their equipment.  "If this does not work it is time to start testing material"

  Try this free video stress test: http://www.ozone3d.net/benchmarks/fur/
  FurMark Setup:

  -If you have more than one GPU, select Multi-GPU during installation
  -In the run, select "Test of stability" and "Journal of the GPU temperature.
  Click on 'Go' to start the test
  -Run the test until the temperature of the GPU maxes - or until you start to have problems (whichever comes first)
  -Click on "Exit" to exit

  It turns out that my card is defective.

• Re: Satellite P750 - white dots appear with animations, not everything at stake

  White dots appeared with all the animations but note during the matches and need info on a solution to this.
  I did a factory reset again it's an update on the graphics card drivers and now the computer sometimes overheats and shuts down and also to slow.

  Any help would be appreciated!

  It s a Satellite P750 with gt 540 m graphics card

  > did a update on the graphics card drivers and the computer now sometimes overheats and shuts down and also to slow.

  You must use the page of the Toshiba driver graphics driver because this driver is designed for mobile use. Drivers from other sources are not changed and lead to overheating GPU. This may damage your laptop.

  PS: it would be interesting to know if the white dots are visible on the external monitor and when you noticed these white dots exactly (what animation?)?

• Blue Screen Atikmpag.sys 0 x 116 Win7 Ultimate X 64

  Hey all,.

  OK, so after a few weeks of troubleshooting and no chance of finding a solution, I thought I'll try to ask someone for help.
  I get the BSOD atikmpag.sys 0 x 116. It started a week after I installed my ATi video card 7970 replace my 5970 who died. The only problem is that sometimes prob once per day to the maximum, or approximately every 8-12 hours. No matter if I play a game or the computer is sitting idle doing nothing. When he wants it just crash it.
  The system ran without a hiccup since 18-19 months so far. Here is my card
  ASUS P7P55D-E Premium Motherboard
  Intel i7 870 OC @ 4 GHz
  ITS ATi 7970
  Thermaltake Toughpower XT 875w PSU
  8GB Kingston HyperX DDR3 (KHX2000C9AD3T1K2/4GX)
  1 HARD WD Green of TB drive
  SB Fatality Pro Sound Card
  BR Samsung drive
  Here's what I tried to do so far to solve the problem
  Drivers - Cleansweep. Tried to use CCC 12.3 and 12.4 (no other don't support my card) has also tried the drivers from the manufacturer's CD
  -Ran Mem test and chkdsk no abnormalities not detected
  -Replace all the Ram, nothing has changed
  -Reset all the bios to the factory settings and no change
  -MB update for the latest version of the Bios
  -Replace the video card without change. (Also tested the 7970 in another machine with the same card and no crash no more)
  -Bought a processor intel SSD 520 series 120 GB and installed a new copy of windows. (12 hours later I installed Skype and got the blue screen during the installation. Ran it again all right)
  Because of the time between BSOD, it has been difficult to quickly diagnose what worked and what did not. If it isn't a major issue in most cases, since I still have the function of pc for most of the time, it would be nice if it didn't happen at all.
  Really, I guess I'm down to replace the motherboard as a final solution that I really don't want to do this now because I don't have a spare part which means I have to go buy a new one and always have the risk that it cannot be the issue. The only other thing I can think is that it is just driver related and I have to wait and hope that maybe ATi next version fix the issue of CCC
  Someone at - it ideas?
  Thank you
  Dominik

  Hey TorrentG,

  After this first dump file, I had updated all my drivers on a new install of win7
  PCTools was my anti-virus software. I only installed the drivers for all my devices and no extra software on my new install of windows and it was still giving me the BSOD.
  After replacing almost all of my material, I was always getting the same question.
  Tried the beta version of 12.6 and not a crash since. Machine worked 24/7 for 12 days per incident.
  Thanks for taking a peek anyway.
  DOM

• Satellite L850 - atikmpag.sys BSOD

  News of the computer:

  Satellite L850-0EF01JAR
  (bought in the Kingdom of Saudi Arabia)
  pre-installed with Win 7 64 bit home edition Basic, up-to-date online to Ultimate

  Question:

  -After a LCD problem, bought an external monitor and reformatted computer
  -update of the AMD drivers but to atikmpag.sys does not BSOD
  -ran DDU and downloaded/installed the drivers from the website toshiba.eu but after reboot, same problem
  -DDU is represented, reinstalled the driver only (without centre of AMD catalyst) but same problem after reboot
  -use the Toshiba Recovery settings but after he installed the display driver, it gives bsod
  -employee Toshiba recover to wipe the HD, ran the recovery, but had the same problem
  -now, I've used toshiba recover to annihilate HD, reinstall windows, install the toshiba display driver, has not restarted the pc, downloaded the drivers omega 14.12 AMD amd, extracted, copied atikmpag.sy_ and has developed, where atikmpag.sys copied and pasted on system32/drivers with the former being renamed to atikmpag.sys.old. (file size difference is large enough; old atikmpag is 350 KB, the news was 500 + kb)
  -restarted the pc and it started
  -Check the Device Manager, it shows yellow exclamation on amd point and driver details shows atikmpag.sys is not digitally signed
  -start on win pc options, advanced disabled driver signature backup and I got BSOD...
  -check the forums as well as a post said on a kb3004934 of victory was updated, but I have not just on my own...

  so, what is next?

  Hello

  I can't find exact laptop specifications and don t know what version of Win7 you have with your machine, but I can't imagine that you have such problems after the original recovery image installation.
  Original recovery image contains drivers tested for your machine.

  Sorry, but I must ask you once more: you may have noticed this problem even if you have installed the original recovery image that you got with your machine?

• BSOD in Windows 8 atikmpag.sys

  I have problems BSOD mainly focussed on the atikmpag.sys (see the first 3 reports WhoCrashed) and was hoping someone could help out. More recently, I got the BSOD who wakes from sleep. I have four monitors and a number of applications (for example, various office products, several tabs in Chrome), but nothing that the computer should not be able to process (see below). I have read a number of discussions on this issue and that you have not found a solution: it seems that there are many possible causes.
  Full .dmp file is available at https://www.dropbox.com/s/k10qxgei0x6tr07/MEMORY.zip for the most recent BSOD. All 4 .dmp minidump files are available at https://www.dropbox.com/s/h5yncexruz3q3ha/Minidump%20Files.zip.
  It is a personalized desktop build.
  -CPU: i7 - 4770K
  -MB: ASUS Z87 - Pro
  -Memory: 2 x 8GB Corsair Vengeance
  -Storage: Samsung 840 Pro Series 256GB SSD
  -Video card: ASUS DirectCU II 28nm HD7970-DC2-3GD5 graphics card
  -Power supply: Corsair AX 850
  Other relevant information:
  -Problem seems related to the graphics card. The 7970 has 1 DVI and DisplayPort 3 link / DVI links in total 4 monitors.
  -No overclocking of any kind.
  -The pilots I know are up to date (for example, graphics drivers, have not installed the drivers from "non-essential" for example for the wireless network adapter). It is possible that the absence of these drivers 'non-essential' is what causes the problem.
  -All Windows updates have been installed.
  -J' did Memtest86 + on each stick of RAM o/n and found no problem.
  -J' reinstalled OS using reset to Windows 8.
  -Temperature of the GPU seems OK (~ 55 degrees C), and the fans seem to be working.
  -J' I just disabled when using Chrome hardware acceleration, as I read somewhere else that it can be problematic.
  -I have not stressed/benchmarked beyond Memtest86 + but can do going forward.
  Any help would be much appreciated, thanks!
  ---
  Friday, June 28, 2013 5:26:11 PM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\062813-4437-01.dmp
  This was probably caused by the following module: atikmpag.sys (atikmpag + 0x480B5)
  Bugcheck code: 0x3B (0xC0000005, 0xFFFFF8800404E0B5, 0xFFFFF880083E8050, 0x0)
  Error: SYSTEM_SERVICE_EXCEPTION
  file path: C:\Windows\system32\drivers\atikmpag.sys
  product: AMD driver
  company: Advanced Micro Devices, Inc..
  Description: multi-vendor AMD driver miniport
  Bug control description: This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: atikmpag.sys (AMD several suppliers Miniport Driver, Advanced Micro Devices, Inc.).
  Google search: Advanced Micro Devices, Inc. SYSTEM_SERVICE_EXCEPTION
  Friday, June 28, 2013 12:47:22 PM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\062813-5750-01.dmp
  This was probably caused by the following module: atikmpag.sys (atikmpag + 0xACF0)
  Bug check code: 0 x 116 (0xFFFFFA80103D24D0, 0xFFFFF88003F5FCF0, 0x0, 0xD)
  Error: VIDEO_TDR_ERROR
  file path: C:\Windows\system32\drivers\atikmpag.sys
  
  product: AMD driver
  company: Advanced Micro Devices, Inc..
  Description: multi-vendor AMD driver miniport
  Bug control description: This indicates that an attempt to reset display driver and recover a timeout failed.
  A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: atikmpag.sys (AMD several suppliers Miniport Driver, Advanced Micro Devices, Inc.).
  Google search: Advanced Micro Devices, Inc. VIDEO_TDR_ERROR

  11:57:07 AM GMT on Saturday, June 15, 2013 crashed your computer
  crash dump file: C:\Windows\Minidump\061513-8296-01.dmp
  This was probably caused by the following module: atikmpag.sys (atikmpag + 0xACF0)
  Bug check code: 0 x 116 (0xFFFFFA800D3AF4D0, 0xFFFFF8800421CCF0, 0x0, 0xD)
  Error: VIDEO_TDR_ERROR
  file path: C:\Windows\system32\drivers\atikmpag.sys
  product: AMD driver
  company: Advanced Micro Devices, Inc..
  Description: multi-vendor AMD driver miniport
  Bug control description: This indicates that an attempt to reset display driver and recover a timeout failed.
  A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: atikmpag.sys (AMD several suppliers Miniport Driver, Advanced Micro Devices, Inc.).
  Google search: Advanced Micro Devices, Inc. VIDEO_TDR_ERROR

  Friday, June 14, 2013 2:42:51 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\061313-5468-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x7B040)
  Verification of error code: 0 x 50 (0x0, 0xFFFFF80331E5CE84, 0xFFFFF69000353D38, 0 x 2)
  Error: PAGE_FAULT_IN_NONPAGED_AREA
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that invalid system memory was referenced.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  I tried the update driver ATI Mobility HD 4300/4500 Windows 8.1 from amd.com but returned crashes. The graphics hardware is old (1/2009) then I disabled the driver from AMD and graphics card uses at least fonts but same resolution with the standard graphics driver not one built for the hardware that is causing all the problems.

  The flicker of the graphics before the accident, said the card cannot handle the high rate of resolution or refresh in the driver crashing in my opinion. This has been ongoing for about 2 or 3 weeks. It's like the laptop is dying. He is 5 years old.

  Try to disable the card manufacturer video driver that is causing problems and live with less fancy accident-free driver from Microsoft.

• Uşaklar and again Atikmpag.sys bsod crash after and after and after

  It all started in a Sun and a nice day I turned my G62-b13ST and after some time it crashed and I googled and I saw that the driver Sweeper and downloading might be a solution I thought. After I've deleted and updated the driver, he arrived after and after and this situation atikmpag.sys and finally ended up here im desperate and hopeless.

  I tried the solutions in the internet and ask you what to do?

  Hi DEVO61,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your laptop HP G62-b13ST and constant crashing. Try perform a reset. When you perform a hard reset note remove all USB devices and remove cards memory card reader location. Disconnect all non-essential devices. If that doesn't help try to turn on the computer, on which you begin to press F11 repeatedly until the menu opens. You can do a System Restore.

  Here is a link to a Update for the BIOS. If this does not help, try tapping F10 key go to the diagnosis and then run the hard drive & memory test when a test fails, you will need to replace the part. Please also check if the device is more heating.

  Please let me know how it goes.

  Thank you.

• Tecra R840 - atikmpag.sys causes bluescreen

  Hello

  displaying videos on my Tecra R840 sometimes I get a blue screen with the atikmpag.sys driver.

  Happens to every time, but often - about one in four times or more.

  The blue screen occurs especially at the beginning of the video - but sometimes also in the end.

  In the download for my Tecra area, there is only one pilot display of 2012 - I have installed.

  I have Windows 7 64 bit, 8 GB of RAM and the AMD Radeon HD 6450 M.

  Does anyone have a tip for me?

  Thank you very much in advance

  Anne

  Hello

  Because this problem does not always, but sometimes, it would be very difficult to reproduce this BSOD and therefore, it is not very easy to say why the BSOD appears.

  Is that file atikmpag.sys belongs to the graphics card driver.
  It seems that the graphics card driver crashes, and therefore the BSOD occurs.
  But why?

  I have two different theories:
  (1) the graphics driver is not fully compatible with the new software installed, tools (games), etc., but the fact is that the Toshiba driver page does not provide all new GPU drivers for this model of laptop. The other point is that the same driver version worked correctly in the past and I m wondering why the same driver should not operate correctly now if it worked correctly in the past.

  (2) my 2nd theory is that the BSOD appears due to the higher temperature of the internal GPU. The highest temperature is mainly a reason for blockages of the system and also responsible for issues of the graphics card.

  Have you tried to reinstall/recover the system? Isn't it?
  I would recommend you do this using the Toshiba recovery disc. This procedure should always be made in the event of system problems.

  I also recommend you to clean the modules of cooling using a jet of compressed air. That would help you get rid of the dust. Dust is mainly a reason if it comes to a temperature higher inside the laptop.

• atikmpag.sys blue screen

  Hello there, so I got this blue screen atikmpag.sys appers in my laptop, I have if I could fix it with an OD format I tried that now, not only there has not been fixed but I cannot run in safe mode because windows have so install, no way to get rid of the blue screen? my laptop is G62-b90EV,
  Thanks in advance

  I fixed it before you post, I just went C:windows/drivers/atikmpag.sys and just delete the file, I reboot and the bsod appeared, then I download just last Ati graphics driver and everything is fine now.

  Anyway thanks for your help!

• Blue screen error with atikmpag.sys in Windows 7

  * original title - various tasks, screen freezes, the driver unloads video (default 100% speed GPU fan), then atikmpag.sys BSOD - 3 months of pain

  Well, this is going to be long and stretched, so I will start with my sincere apologies.

  Description of the problem:
  I rebuilt my entire machine a few months previously, after purchasing a TechNet Plus subscription new video card ATI Radeon 5870 2 GB and new AMD PhenomII X 4 965 CPU.  Quickly, I installed Windows 7 Ultimate x 64 and started to load all the drivers and applications.  Then the problems started.  I want to play WoW would freeze the game, the screen would be gray, then black, then the fan on the video card could turn 100% gas (video driver Windows in vacuum), then about 60 to 90 seconds later, I'd get a BSOD with either atikmdag.sys or lately, it's been atikmpag.sys.  This happens also in looking at video clips in Windows Media Player or VLC and sometimes even when I watch YouTube videos (both in IE or Firefox).

  System Specs:
  ASUS Crosshair II Formula motherboard
  Processor AMD PhenomII X 4 965
  Patriot 4 GB RAM
  Sapphire ATI Radeon 5870 2 GB
  AHCI controlled hard discs and CD
  Windows 7 Ultimate x 64 (Technet)

  Resolution attempts:
  1 reinstalled Windows 7
  2. reinstalled Windows 7
  3. has taken the store of the local computer system and received a replacement of the stock video card
  4 reinstalled Windows 7
  (while reinstalling Windows, tried to use the drivers ATI Catalyst 9.12 (from original CD) version, 10.1, 10.2, 10.3, 10.4 and finally 10.5 installed on 2010-03-06)
  5 has tried to change ATI Performance profile XML
  CoreClockTarget and MemoryClockTarget to Want_0 and Want_1 to be superior to
  by default, if the map wouldn't increase the speed as well (recommended by ATI
  Forums)
  * a began to arrive like clockwork, when I installed RollerCoasterTycoon3, crash guaranteed within 30 minutes from a screenplay, it began 6/1, so the following entries are from this past weekend at today *.
  New drivers from ATI, 10.5, installed.  No change in behavior.
  6 disabled Aero in the Windows (no effect, re-activated)
  7 uninstalled catalyst Suite, leaving bare drivers only (current config with version 10.5)
  8 tried to use verifier.exe to diagnose the problem, the system would be only BSOD when booting, soon in the splash screen, then restart
  9. attempt to repair window, unable to find a solution, no change, restart
  10 Mode safe boot to run verifier.exe and remove current running values
  11 restart Windows normally
  12 called Support Microsoft (available upon request by MP number) 07/06/2010

  Controlled Microsoft Support Technician my computer for a few minutes and I showed him the minidump file use dumpchk.exe, but he said it seems to be just a video card driver problem.  I have very very hard to believe that after 3 re - moved and 5 different versions of the drivers.  I will try to contact the ATI support tomorrow.  I thought that someone on this site might be able to help me to the analysis of minidumps and eventually find the real cause of this issue.  I download DxDiag.txt exit, minidumps and the full memory.dmp file (compressed with winrar best setting, but was still divided into two files because of the restriction of 50 MB) to my folder public skydrive, link below:
  http://CID-44caa82b00d80af9.Office.live.com/Browse.aspx/public

  If there are things that I left out, or questions, please ask and I will answer as fast as I can.  I really want to fix this, so I won't have to format and upgrade to a different operating system.

  James Kerr

  Hi James Kerr.

  Please see the post below with a similar problem and fix possible:

  http://social.answers.Microsoft.com/forums/en-us/w7hardware/thread/22405645-749b-4d62-92bb-e4710277c90d

  Also, please see the following site AMD forums post:

  http://forums.AMD.com/game/messageview.cfm?CATID=260&ThreadId=104677

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Re: Satellite L70 - B - game crashes when the battery removed

  I have a portable Satellite L70 b - 130 and I have the following problem:
  If I remove the battery from the laptop and turn it on, when I start the game it crashes... If the battery is connected and I enter the game, it works

  Hello

  Does the system crash or just this game here?

  You have the same problem as other games and other applications running?

  Are you using the same parameters of the power station with or without battery?

• Satellite L70-B-119 - creation of recovery on USB

  Hello

  Going to buy the laptop Satellite L70-B-119
  I will need to create the recovery disk
  Can I use usb 2 or usb 3 formatted in fat 32
  What size usb GB do need me for this machine
  an alternative to this will be the satellite L50-B-1NL
  It would be the same size usb

  Concerning
  [email protected]

  I do not have these models of laptops, but on my Satellite U940 with Win8 I used the 16 GB USB key.

  When you start the creator tool Toshiba Recovery you will see information on recovery image and USB key, you can use. In my recovery image view is between 12 and 14 GB 16 GB USB key will be right for you.

• Satellite L70-A-139 - guaranteed zero when removing the cover for the RAM and HARD drive

  Hi all

  I have a Satellite L70-A-139 youcef.
  And at the back of the laptop, there is a cover that is fixed with a screw.

  Wil I void the warranty when I unscrew and take a look?
  I want to upgrade my HDD to SSD.
  The motherboard supports Sata III: D.

  Thank you!

  No, the mandate must still be valid.
  There is a removable cover at the bottom of the unit as shown here:
  [Toshiba Satellite C70 / C75 / C70D / C75D / L70 / L70t / S70 / HARD S70t drive replacement procedure | http://aps2.toshiba-tro.de/kb0/CRU3703HG0000R01.htm]

  Then you should be able to upgrade the RAM and HARD drive.
  I think this info should be mentioned in the user manual too.