Win 8 BSOD kernel_data_inpage_error

Similar Questions

• BSOD KERNEL_DATA_INPAGE_ERROR

  My windows 8 crashes with the error KERNEL_DATA_IN PAGE_ERROR.  Any help with the mini dump file analysis?

  Dump files and the information system are compressed here...   https://www.dropbox.com/s/dh9tqmzmh5ofo7y/files.rar?DL=0

  Hello

  Error checking 7A, {4, 0, fffffa800476dd60, 64c43a2e30}

  Probably caused by: ntkrnlmp.exe (nt! FNODOBFM: 'string' + 246f4)

  Ntkrnlmp.exe is a component of Windows which means than anything else he has led astray.

  1. if you're overclocking anything STOP!

  2. check with HP Support, their drivers and documentation online and ask questions in the forums about known problems. Update the BIOS, chipset drivers and major
  device drivers embedded and separate (see methods of updating driver below).

  BiosVersion = F.26
  BiosReleaseDate = 03/06/2014
  SystemManufacturer = Hewlett-Packard
  SystemProductName = HP Pavilion Notebook PC g6
  Family = 103C_5335KV G = N L = CON B = HP S = PAV X = Null
  SystemVersion = 087C 110014385910000620120
  SystemSKU = C7N61UAR #ABA
  BaseBoardManufacturer = Hewlett-Packard
  BaseBoardProduct = 183F
  BaseBoardVersion = 56.32

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  3 carefully check for malware (see next answer).

  4 use all other methods in the troubleshooters below if necessary.

  5 if necessary run the Driver Verifier to see if it can indicate a CAUSE (see Driver Verifier
  methods below).

  ====================================================

  In 'some' case will help this article.

  Crashes Windows or freezes
  http://support.Microsoft.com/kb/2681286

  Do not forget to check with support of system manufacturer (manufacturer of motherboard for custom
  online systems), their resources and the drivers and ask in their forums (if any)
  on known problems. Don't forget to update BIOS, drivers of low level chipset,
  and the other pilots of major on-board and separate devices. Those who alone can
  set all or part of these issues.

  ========================================================

  Do you use a SSD? Or RAID? Check "EVERYTHING" on the hard drive, controller and wiring (from the discontinuation of ALL power first).

  -----------------------------------------------------------------------------------------------

  Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
  According to needs). Win + D key calls the office and using Win Key active / disable the Office
  and the splash screen.

  Translate Windows 7 methods and use them on Windows 8/8.1

  Resolution of the blue screen in Windows 8/8.1 errors
  http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errors
  
  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or can not
  Start Windows (applies to Windows 8/8.1). If you cannot start Windows 8/8.1 try using
  a disk repair (see methods of doing a below) to access Mode without failure and other evil -.
  steps of shooting.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  ========================================================

  
  BCCode: 7A 0x0000007A

  The main causes of this error are virus/malware, drivers, memory, and disk damage. And it may even be combinations of those so meticulous control of all is necessary. Added the possible causes are clerical errors such as the motherboard damaged or other materials.

  BCCode: 7A 0x0000007A

  BCCode: 7A 0x0000007A<-- read="" this="" link="" read="" this="">
  * 1137.html? order = date http://www.faultwire.com/solutions-fatal_error/kernel-Data-InPage-Error-0x0000007A-

  Bug Check 0x7A: KERNEL_DATA_INPAGE_ERROR<-- read="" this="">
  http://msdn.Microsoft.com/en-us/library/ff559211 (v = vs. 85) .aspx

  See also - control bug 0x77 (KERNEL_STACK_INPAGE_ERROR)

  ------------------------------------------------------------------------------------------------

  It's my generic how updates of appropriate driver: (updated all the drivers and BIOS)

  This utility, it is easy see which versions are loaded: run DriverView - VIEW driver Microsoft set hide - update those without drain in their names (and the BIOS and chipset drivers).

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For each driver in the list, additional useful information is displayed: load address of the driver, description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common. Control Panel device - graphics card configuration-manager - note the brand and complete model of your graphics driver - double-click - tab - write version information. Now, click the driver update (this can do nothing as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT it will refresh the driver stack.

  Repeat for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their own software and drivers and the other main device drivers you have.

  Now go to the website of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration), then site of the manufacturer of the device (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Review of the BIOS, Chipset and software updates on the site of the manufacturer of the system while there).

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This is because some restore drivers before the most recent is installed (particularly that audio drivers) so install a driver - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Windows 8/8.1 - hardware and drivers
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Windows 8/8.1 - Why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Windows 8/8.1 - what happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  ----------------------------------------------------------------------------------------

  Tests of memory intercept all errors, such as memory do not match (possible even for poles that seem identical) and how faster memory is placed in system behind the slower memory. Also is it better to Exchange also sticks in and out to check for those, even if all the tests of memory do not show a problem.

  To test the RAM here control - run 4 + hours or so.<-- best="">
  www.memtest.org

  For the Windows Memory Diagnostic tool.

  WinKEY + W - type in the search-> memory box - find the top Memory Diagnostics tool
  list - and follow the prompts.

  How do I Run the diagnosis of memory Windows 7 (and 8) - in Windows 8 the
  the name is "Windows Memory Diagnostic".
  http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

  ======================================================

  After doing ALL the updates you can and if the problem persists, run DriverVerifier.
  (Remember to use the methods Windows 8 posted at the top of the first answer above).

  Driver Verifier can help find some BSOD problems:

  Using Driver Verifier to identify issues with Windows drivers for users advanced
  http://support.Microsoft.com/kb/244617

  How to solve the problems of driver in Windows Vista or 7.
  http://www.WinVistaClub.com/T79.html

  Using Driver Verifier
  http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

  How to use Windows drivers check Manager to solve problems and identify the Driver questions
  http://www.YouTube.com/watch?v=_VwIDD9xngM

  Driver Verifier
  http://www.techsupportforum.com/2110308-POST3.html

  Using Driver Verifier
  http://www.faultwire.com/solutions/using_driver_verifier.php

  You can disable the driver verifier
  http://support.Microsoft.com/kb/244617

  WINDOWS key + X - RUN - type-> auditor/reset press ENTER to disable

  BlueScreenView lets you know if there is a driver specified in the error message. Also check with MyEventViewer when the blue screen.

  If DriverVerifier creates a minidump upload it and post the link here so we can analyze.

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Satellite C660-24F: win 10 BSOD - system thread exception unhandled

  I upgraded my Toshiba Satellite C660-24F to windows 10 pro. After the upgrade it restarts again and again showing the dead blue screen with the message
  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED. (athwbx.sys). How can I get rid of this error?

  athwbx.sys which is mentioned in your message, belongs to the Atheros WLan driver...

  So, I think that the BSOD appeared because of compatibility problems between the Win 10 and driver Atheros...

  Possible solution:

  I think that deletion of the Atheros driver in Device Manager should help you to solve this...

  Please keep the device connected to the internet using LAN.

  So after uninstalling the Atheros WLan driver and you restarted the laptop, Win 10 should automatically find a driver compatible WLan to internet automatically...

• Satellite A300 - 1EC Win XP: BSOD during the passage of external display

  Toshiba Satellite A300-1ec almost new, with Win XP sp3, all updates, drivers of toshiba Web page

  When I use the extended via tv (s-video) output option, everything is ok.
  But when I try to change the display, extended (or any display mode double) to a single screen (laptop)... I get a blue screen

  He said something nvidia... but it's not very useful

  someone knows more?

  Hello!

  The Microsoft Knowledge Base, I found an article about this BSOD:
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;827663

  In addition, I think it might be the hardware problem, in my opinion the RAM.
  Test the RAM with Memtest86: [www.memtest86.com]

  Maybe reinstall Windows to solve the problem.

  Good bye

• Need help to understand the last string on my Win 7 BSOD. The Minidump files are attached.

  Hello

  Since last week, I've known several BSOD. Some have referred to a memory problem, but after you run a memory diagnostic seveal times, I still have to find the problem.

  Since last week, here is the link to the minidump files.

  https://onedrive.live.com/redir?RESID=2FA3EA1D7C87B0CD! 471 & authkey =! AA05X_X_DXaEOgc & ithint = % 2cdmp

  Thanks in advance for any help you can give.

  These accidents were related to the corruption of memory (probably caused by a driver).

  Please run these tests to check your memory and find which driver is causing the problem.

  
  

  If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.

  
  

  Since then, it is more likely to be a pilot run everything first.

  1-Driver Verifier (for full instructions, see our wiki here)

  
  

  If the auditor does not have the issue we move to it.

  2-Memtest. (You can learn more about running memtest here)

  
  

  If you cannot start after you have enabled the auditor reboot in safe mode

  In Vista & victory (F8)

  When win 8 http://www.howtogeek.com/107511/how-to-boot-into-safe-mode-on-Windows-8-the-easy-way/

  
  

  Co-written by JMH3143

  .

  Microsoft (R) Windows debug 6.3.9600.17029 AMD64 Version
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading file Dump [C:\Users\Ken\Desktop\New folder\080714-32011 - 01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol of validation of the path summary *.
  Location of response time (ms)
  Deferred srv * C:\Symbols* http://msdl.microsoft.com/download/symbols
  Symbol search path is: srv * C:\Symbols* http://msdl.microsoft.com/download/symbols
  Executable search path is:
  Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) free x 64
  Product: WinNt, suite: TerminalServer personal TerminalServer
  By: 7601.18409.amd64fre.win7sp1_gdr.140303 - 2144
  Computer name:
  Kernel base = 0xfffff800'03660000 PsLoadedModuleList = 0xfffff800'038 has 3890
  The debugging session: Thu Aug 7 14:15:03.891 2014 (UTC - 04:00)
  System Uptime: 0 days 4:02:55.202
  Loading the kernel symbols
  ...............................................................
  ................................................................
  ........................
  Loading user symbols
  Loading unloaded module list
  .......
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Bugcheck 50, {fffff6e400084040, 0, fffff800036e7f42, 5}

  Could not read the name of the problem driver
  Probably caused by: memory_corruption (nt! MiUpdateWsle + 122)

  Follow-up: MachineOwner
  ---------

  0: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  PAGE_FAULT_IN_NONPAGED_AREA (50)
  Invalid system memory was referenced.  This cannot be protected by try-except,
  It must be protected by a probe.  In general, the address is simple bad or it
  pointing to freed memory.
  Arguments:
  Arg1: fffff6e400084040, memory referenced.
  Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
  Arg3: fffff800036e7f42, if not zero, the address of the instruction that refers to bad memory
  address.
  Arg4: 0000000000000005, (reserved)

  Debugging information:
  ------------------

  Could not read the name of the problem driver

  READ_ADDRESS: GetPointerFromAddress: unable to read from fffff8000390d100
  GetUlongFromAddress: cannot read fffff8000390d1c0
  fffff6e400084040 non paged pool

  FAULTING_IP:
  NT! MiUpdateWsle + 122
  fffff800'036e7f42 498b 00 mov rax, qword ptr [r8]

  MM_INTERNAL_CODE: 5

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

  BUGCHECK_STR: 0 X 50

  Nom_processus: vsserv.exe

  CURRENT_IRQL: 0

  ANALYSIS_VERSION: 6.3.9600.17029 (debuggers (dbg). 140219-1702) amd64fre

  TRAP_FRAME: fffff8800970b550-(.trap 0xfffff8800970b550)
  NOTE: The frame trap does contain not all registers.
  Some registry values can be set to zero or incorrect.
  Rax = 0000098000000000 rbx = 0000000000000000 rcx = 0000000000000a0f
  RDX = 0000c 80010808009 rsi = 0000000000000000 rdi = 0000000000000000
  RIP = fffff800036e7f42 rsp = fffff8800970b6e0 rbp = 0000000000000c 70
  R8 = fffff6e400084040 r9 = 0000000fffffffff r10 = fffff70001080488
  R11 = 000000000000116e r12 = 0000000000000000 r13 = 0000000000000000
  R14 = 0000000000000000 r15 = 0000000000000000
  iopl = 0 nv in pe of na EI ng nz cy
  NT! MiUpdateWsle + 0 x 122:
  fffff800'036e7f42 498b 00 mov rax, qword ptr [r8] ds:fffff6e4'00084040 =?
  Reset the default scope

  LAST_CONTROL_TRANSFER: from fffff800037525b3 to fffff800036d5bc0

  STACK_TEXT:
  "fffff880 '0970b3e8 fffff800' 037525b 3: 00000000'00000050 fffff6e4 ' 00084040 00000000 00000000' fffff880 ' 0970b 550: nt! KeBugCheckEx
  fffff880 '0970b3f0 fffff800' 036d3cee: 00000000 00000000' fffff6e4 ' 00084040 fffffa80' 04122600 fffffa80'00000028: nt! : FNODOBFM: 'chain' + 0 x 43801
  fffff880 '0970b 550 fffff800' 036e7f42: fffffa80'00000028 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiPageFault + 0x16e
  fffff880 '0970b6e0 fffff800' 036f41bd: 00000000' 00000a0f 00000000' 23ba4548 fffff700 ' 01080000 fffff700' 01080000: nt! MiUpdateWsle + 0 x 122
  fffff880 '0970b 750 fffff800' 036f39df: 20f00001 '63eb7025 00000001' 63eb7121 fffffa80' 04e10200 00000000' 00000000: nt! MiCompleteProtoPteFault + 0x2cd
  fffff880 '0970b7e0 fffff800' 036f24f3: 00000000' 0016bd60 000007fe'fbef34ac fffff683 'ff7df798 fffffa80' 07f6cd08: nt! MiResolveProtoPteFault + 0x1cf
  fffff880 '0970b 870 fffff800' 036e2179: 00000001 00000000' 000007fe 'fbef34ac fffffa80' 09a44af0 00000000' 00000000: nt! MiDispatchFault + 0x1c3
  "fffff880 '0970b 980 fffff800' 036d3cee: 00000000 ' 00000008 000007fe ' fbef34ac fffff880'00000001 00000000' 0863fe50: nt! MmAccessFault + 0 x 359
  fffff880 '0970bae0 000007fe' fbef34ac: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiPageFault + 0x16e
  00000000' 0863fb68 00000000'00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: 0x000007fe'fbef34ac

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  NT! MiUpdateWsle + 122
  fffff800'036e7f42 498b 00 mov rax, qword ptr [r8]

  SYMBOL_STACK_INDEX: 3

  SYMBOL_NAME: nt! MiUpdateWsle + 122

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: nt

  DEBUG_FLR_IMAGE_TIMESTAMP: 531590fb

  IMAGE_VERSION: 6.1.7601.18409

  Nom_image: memory_corruption

  FAILURE_BUCKET_ID: X64_0x50_nt! MiUpdateWsle + 122

  BUCKET_ID: X64_0x50_nt! MiUpdateWsle + 122

  ANALYSIS_SOURCE: KM

  FAILURE_ID_HASH_STRING: km:x64_0x50_nt! miupdatewsle + 122

  FAILURE_ID_HASH: {adc90a39-f60f-e57a-aeeb-d2a428d2eb03}

  Follow-up: MachineOwner
  ---------

• Error Win 7 BSOD on my Dell Inspiron laptop.

  My laptop Dell Inspiron running Win 7 Home Premium 64 bit often gives me error BSOD especially if I use Internet Explorer (version 9).

  The error indicates something error page_file and igdmpd64.sys at the beginning.
  The error dump file created is linked here: https://dl.dropbox.com/u/76864031/030713-24242-01.dmp
  If anyone can help?

  Hello

  References to Vista also apply to Windows 7.

  It's my generic how updates of appropriate driver: (don't forget to update the BIOS and)
  Dell chipset drivers)

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, this leaves ONE of Windows updates, but it will not install the drivers who will be generally
  be older and cause problems. If updates offers a new driver and then HIDE it (right click on it)
  and then go look for new ones manually if you wish.

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ==========================================

  Tests of memory intercept all errors such as memory do not match (possible even
  for clubs that appear to be identical) and when the faster memory is placed in the system
  behind the slower memory. It is therefore preferable Exchange also sticks in and out to check
  These tests of memory even if all are not a problem.

  To test the RAM here control - run 4 + hours or so.<-- best="">
  www.memtest.org

  For the Windows Memory Diagnostic tool.

  Start - type in the search-> memory box - find top - click - right Memory Diagnostics tool
  RUN AS ADMIN follow the instructions

  Windows Vista: How to scan / test your memory with Windows Vista memory or RAM
  Diagnostic tool
  http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

  How to run the diagnostic tool memory in Windows 7
  http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Windows 8: get randomly BSOD kernel_data_inpage_error

  Hi Microsoft community. The laptop that I use an Asus F501A with Windows 8 (not 8.1 as the download of the update always gives an error), randomly gives a BSOD with a "kernel_data_inpage_error". When people ask me to use chkdsk I do, but the problem is still there.

  Where should I start to solve this problem?

  Thank you!

  All attached files of the DMP are (7A) KERNEL_DATA_INPAGE_ERROR bug check.

  This bug check indicates that the data page of the kernel of the required paging file cannot be read into memory.

  7 has error checking, {4, 0, fffffa8006e836c0, fffff8a009891980}

  -ERROR_CODE: (NTSTATUS) 0 - STATUS_WAIT_0

  ---------------

  You have two suites antivirus installed, is to create conflicts and causing memory corruption.

  Remove and replace Avira and Windows Defender in Windows 8 integrated McAfee for temporary troubleshooting purposes:

  Avira - removal http://www.Avira.com/en/support-for-home-Knowledgebase-detail/kbid/88

  Removal of McAfee- http://service.McAfee.com/FAQDocument.aspx?ID=TS101331

  Windows Defender (how put on after the withdrawal)- http://www.eightforums.com/tutorials/21962-Windows-Defender-turn-off-Windows-8-a.html

  Kind regards

  Patrick

• BSOD Kernel_Data_Inpage_Error, now after the upgrade to Windows 8.1, computer laptop keeps auto restart

  Original title: Kernel_Data_Inpage_Error on Windows 8.

  Hello
  A few days ago my laptop continued to restart on its own, turning to a blue screen with a message saying: "Kernel_Data_Inpage_Error". Given that this happened that the sound no longer works on my laptop, I tried to update my laptop to Windows 8.1 to see if that could help solve the problem, but when he started to install my laptop itself restarted each time.
  Do you know what I can do to fix this?

  Please get back to me on that.
  Thank you.

  Mitch

  It works

  First thing.  I would update to win 8.1 when you have solved the problem

  These accidents were related to the corruption of memory (probably caused by a driver).

  Please run these tests to check your memory and find which driver is causing the problem.

  
  

  If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.

  
  

  Since then, it is more likely to be a pilot run everything first.

  1-Driver Verifier (for full instructions, see our wiki here)

  
  

  If the auditor does not have the issue we move to it.

  2-Memtest. (You can learn more about running memtest here)

  
  

  If you cannot start after you have enabled the auditor reboot in safe mode

  In Vista & victory (F8)

  When win 8 http://www.howtogeek.com/107511/how-to-boot-into-safe-mode-on-Windows-8-the-easy-way/

  
  

  Co-written by JMH3143

  .

• Windows BSOD KERNEL_DATA_INPAGE_ERROR 8; Ntoskrnl.exe + 7 has 040

  Hello world

  I had reinstall Windows 8 last month cause too many errors with the Windows 8 and I had still BOSD arrives with a new installation of Windows 8.

  The last that I have no will is this one:

  KERNEL_DATA_INPAGE_ERROR

  Ntoskrnl.exe + 7 has 040

  We arrive in surfing on the web and burning with IMGBURN. Many Disconnections occur when you use the dvd burner.

  The other at the moment that I solved is "atikmpag.sys" I read on the net that I need to update the file from a download of catalyst frensh.

  Here all DUMP files and the news of the computer:

  All files: https://skydrive.live.com/redir?resid=10F449F32E80D9B2! 390

  Thank you!

  8ternity

  They were related to the following

  KERNEL_DATA_INPAGE_ERROR (7A)
  The requested page of kernel data could not be read in.  Is usually caused by
  a bad block in the disk controller or paging file error.

  My gut feeling is that it is one of these drivers or your moy.  I would like to update the drivers and replace AVG with the built-in Defender

  000 fcl 26/09/2008 09:11:22
  ksaud.sys 2010-07-14 06:12:54
  ntk_PowerDVD_64.sys 03/08/2010 05:04:12
  PxHlpa64.sys 2011-10-17 10:29:34
  amdsbs.sys 21/02/2012 14:15:43

  AVG can be a cause of BSOD.

  http://www.Avg.com/us-en/utilities

  How to find drivers:
  -Google search for the name of the driver
  -compare Google results with what is installed on your system to determine on what device/program, it belongs to
  -Visit the web site of the manufacturer of the hardware or program to get the latest drivers (do not use Windows Update or Device Manager Update Driver function).
  s ' there is difficult to locate them, post back with questions, and someone will try and help you find the right program

  The most common drivers are listed on this page: driver reference

  http://www.carrona.org/dvrref.php

  http://SysNative.com/drivers/

  -Driver manufacturer links are on this page: http://www.carrona.org

• 007 b under Win XP BSOD

  I tried to convert a virtual machine for the server 2.0 Win XP a Lenovo Thinkpad R60e. After a few failed attempts with 3.0, I used the beta version which seems to offer more flexibility.

  3.0 has always reported to 97% (impossible to determine the operating system). With the beta version, I had (I guess that the same error) to 94% in the phase of reconfigure. Disable the option to reconfigure, conversion for the first time has completed successfully, however, the clone is always starts plu.

  Get bsod 0x0000007b (0xf7941524, 0xc0000034, 0, 00 0 x 00... 0)

  Tried several options for the disk ("even" and buslogic) adapter.

  The error messages from the converter:

  An exception in the meantime on the agent task ends. Collecting newspapers to the officer before reproducing the exception more. Exception message: converter.agent.internal.fault.ReconfigFault

  Since the position of the user, if I understand well he ain't going to ESX and FDI should not be a problem. Also the user mentioned that he chose "buslogic" destination controller, so my guess is that it could not be associated with free.

  Could you please use converter to get the logs and attach them here. Better yet, please post on the forums of 4.0 beta converter because you use version 4.0. In 4.0 you can right click on the task that failed and click on "export logs.

• Portege 3440 CT - cannot install the Win XP - BSOD 0X0000007b

  Hello

  I HAVE A TOSHIBA * PORTEGE 3440 CT *.

  I WANT TO INSTALL WINDOWS XP.
  THIS LAPTOP DO NOT HAVE A CD-ROM DRIVE AND I USE A LIGHT OF 24 PCMCIA FREECOM TRAVELLER CD.
  I DOWNLOADED THE FREECOMBOOTDISKCREATOR. EXE TO MAKE MY USB FLOPPY BOOT DRIVE AND STABLE THE XP.
  PERHAPS THE PROBLEM IS THAT MY COMPUTER DOES NOT RECOGNIZE THE USB FLOPPY OF FFD TO RUN AND INSTALL WITH A BLUE SCREEN OF DEATH (ERROR 0X0000007B) ABORDED.

  I HAVE THE WINSOWS XP SP2 OEM.

  THANKS FOR THE HELP
  NIK

  First of all thank you for sharing this with us and great info you could install Win XP using the external CD/DVD drive.

  > but if you can help me with a solution without additional CD-ROM usb drive I would be gratefull!
  Hey mate. It is important that you could install Win XP ;)

  PS: as far as I know you don t need any driver to start from the CD/DVD of PCMCIA drive. It s controlled by the BIOS.
  Therefore, it should be possible for a start of the PCMCIA CD/DVD drive and reinstall Win XP

• Tecra A7 PTA71E - Win XP BSOD

  Hello

  Since 2007, I have my Tecra. I bought it with win XP. Until the middle of 2011 OS works OK, but not later.

  When I turned toward the top of the computer, it starts and when the Office was running, I just started with the trackpad or USB mouse on any item on the desktop, but he could not close more. I could only use of the keyboard and the selection of logoff windows blue screen n to log in again.

  From that moment, I could turn on or off each application or component on the desktop.
  The problem with Windows XP.

  Unfortunately, after replacing the windows 7 32 bit with a previous disk formatting problem remained.

  Now, do not turn off your single computer switch to hibernation. Each full stop ends the same, and I have to log off and log in. Mouse USB and touch pad work the same way. It makes no difference if the mouse is connected or not.

  Hello

  It seems that the problem of equipment.
  I came to this conclusion because the installation of the new operating system (Win 7) has not helped to solve this problem.
  So I think that you agree with me.

  What part of the material could be affected?
  Well, I think that some common parts such as RAM or HARD disk should be tested.
  How?

  Well, the HARD disk might be tested using some freeware like Drive Fitness Test Tools.

  Software RAM tests are not really useful, and I believe that laptop must be tested using new modules of good work.
  But of course it s just a guess on my part

  If you put t want money spent on the new RAM modules to check if its ok or not, consult a technician who could do it for you.

• Lost? Profile after win 10 bsod

  I got Thunderbird upward and running when my computer - 10 (64-bit) windows - suffered a bsod. After the restart, I tried to restart Thunderbird - and he started as if it was the first time that I use - (profile corrupted or lost?) I did nothing to this point because I don't want to lose anything if possible... Thunderbird has worked like a charm until today...

  http://KB.mozillazine.org/Recovering_a_profile_that_suddenly_disappeared

• Win 7 BSOD, high with ndis.sys latency

  My laptop has experienced slow load time, audio popping/cracking. I also got BSOD when trying to restart/shutdown. It of like it since Oct/Nov ' 14 and did not get better. I uninstalled it, rebooted and will fix temporarily the problem, he'll be back in a day or two. All my drivers are up to date, no viruses or malware. No memory problem. Laptop works very well except for latency, whenever I go online to browse the internet or play a game.

  In addition, I'm unable to load the minidump file. When I try to load it OneDrive, I get an error saying: the file is empty. I can't download it from WinRar, "access denied." I am the only user on my laptop computer account.

  Any help is greatly appreciated.

  FM

  This phenomenon was linked to the pilot of packet filter NetGroup, part of the WinPcap packet capture library (list of programs that use it: http://www.winpcap.org/misc/links.htm )

  I just want to remove this

• Win 7 bsod 9f hibernation

  Recently at the computerized format. Now get a bsod after hibernation. Generally, the computer crashes and refuses to Hibernate and I force the computer to shut down.

  Run debugging tools, do not know what is the problem?

  minidump file
  https://SkyDrive.live.com/redir?RESID=D90119B2F667AF53! 109 & authkey =! AHf72BdOg_Jg8Yk
  XML file
  https://SkyDrive.live.com/redir?RESID=D90119B2F667AF53! 110 & authkey =! APcxHceKFRB1gqA

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.48
  Locale ID: 1033

  More information about the problem:
  BCCode: 9f
  BCP1: 0000000000000003
  BCP2: FFFFFA80048EFA10
  BCP3: FFFFF80004442518
  BCP4: FFFFFA8009231630
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1

  Files helping to describe the problem:
  C:\Windows\Minidump\012213-32510-01.dmp
  C:\Users\***\AppData\Local\Temp\WER-374964-0.SysData.XML

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  It was linked to the NETw5s64.sys Wireless WiFi Link Driver of Intel Corporation.  I would like to re - install the latest driver available. »