Bug certview examing score reports

Similar Questions

• CAMERA BUGS AND ISSUES - please report them in this thread. REPORTS ONLY PLEASE.

  If you have had an accident unexplained camera or a bug please report it here in this one single thread. By reporting any camera hangs in one place and not in separate threads, as well as information on the configuration of the camera and aboved we hopefull can achieve several things:

  1: know just how big or small the problems really are. These incidents isolated or is there a bigger problem. There are thousands of F5 Networks and F55 in operation day after day. It is not surprising to find the weird device with a previously unknown hardware or a software problem, but if there are several examples of the same show, then this may indicate a problem of firmware. By collationg, all unexplained of bug reports in one place that we can find areas of interest.

  2: by including a detailed report of what is past and what accessories were attached to the time where we can look for common factors that can cause problems.

  3: Sony only needs to check a thread to see what is happening, they do not need to browse through pages and pages of stuff.

  ONLY after a bug/crash report. NO feature requests or ' I wish that... ". "Lets keep the clutter of wire free to make it easier to see any real operational concerns. I suggest a single page that can be updated with workarounds or know bugs that users should be aware of. Please do not discuss your problems or other problems on this thread. That's just pointing that out. If you want to discuss a topic report it here first, and then open a new thread on this specific issue.

  WHAT TO INCLUDE IN A BUG REPORT:

  Please provide the following information:

  Version type and the firmware of the camera. Version of the firmware so attached R5.

  Attached Aboved, include R5, adapters battery or power supply, viewfinders, monitors connected directly to the camera.

  Type of battery and the brand, the battery charge State if know.

  The type of SxS card, preferably the part number on the back of the card for example 'SBP - 64.

  The record format and pace. All special modes such as slow shutter or S & Q.

  If you use a scene or non-standard file defining let us know.

  What you were doing when the bug appeared and what has happened as well.

  Everything you think might have contributed to the bug or what you're doing to get around.

  Moderators: I think it must be done in a sticky?

  As reported in another thread: If you upgrade the firmware and then load a FILE ALL created when the appliance has been set at 25 p/50 p, then the camera crashes while recording. For now, I would recommend creating a FILE all charges or the SCENE FILE for each version of firmware.

• Bug in the classic report based on the function?

  A simple example, suppose I want a classic report in which I can change the sort field by selecting in the P1_SORTFIELD element. Apex 4.2, I was able to implement the report using the PL/SQL function

  return "select ENAME, SAL from EMP by | : P1_SORTFIELD;

  I can't do that in Apex 5 on my workspace apex.oracle.com. I either get a runtime error "SQL command not completed property" if I use generic column names, or 'not all variables' if parse error I do not have.

  My real application use generic column names, so I am more interested in a solution to this.  For example, I tried to create a report with the source

  return "select ENAME from EMP by ENAME;

  If I run using the generic column names I always get the runtime error "command SQL not successfully completed.

  Is this a bug?

  Ed Sciore

  Hi Ed,

  I ran your application in debug mode and displays the following error output.

  show report
  determine column headings
  
  ...Execute Statement: select ENAME, SAL from EMP order by ename
  order by 1 nulls last
  
  Logging exception:
  Sqlerrm: ORA-00933: SQL command not properly ended
  Backtrace: ORA-06512: at "SYS.DBMS_SYS_SQL", line 1445
  ORA-06512: at "SYS.WWV_DBMS_SQL", line 464
  ORA-06512: at "SYS.WWV_DBMS_SQL", line 475
  ORA-06512: at "APEX_050000.WWV_FLOW_DYNAMIC_EXEC", line 411
  

  See the other "order by null 1 last" that is added to your statement. This is what the origin of the problem. The additional order by is caused by the "Sortable" indicator enabled for your columns. If you disable the sort, because will work you who control in your SQL statement in the report well.

  I'll take a look tomorrow, if we had a different behavior in 4.2 to automatically disable these flags and how it is actually easy to determine safe at the time of the design that your pl/sql function returns a SQL statement with an ORDER BY clause.

  Concerning

  Patrick

  Member of the APEX development team

• Drive Score Reporting?

  What reports you pull out Eloqua connect lead scoring to your sales teams?  FOR INFO. We don't have a salesforce (we MSCRM... yuck).

  If you just want you sales team to know the score of the person they want to contact that is as simple as pass head score to CRM when you do your normal sync. I know you can do this in MSCRM because we were at my last company. All you have to do is to create a score to lead field in MSCRM and map integration. Then sales could filter or sort their sons based score.

  We also ran a lot of reports for them so that they could see how many people was in each partition to identify problems. This was done mostly using filters contact to get the number of people with each score to lead.

• Is it possible to score report for a selected set of questions in a quiz?

  Hi I am new to Captivate and SCORM. I have read the threads on the forum and the blog Lilybirl and learned a lot in the last days. I wish someone could help me with this too:

  We hope to develop a course in a single captivate project that allows the following functions:

  • There are several pre-test and post-test. The scores of each of the preliminary tests will be used to effect branching. See, if we take 1 pre-test and passes, then it will go to the conference 2. otherwise returns to give lectures 1;  If one takes 2 pre-test and past then, then she will go to statement No. 3; otherwise, go back to the 2 conference; same thing for the pretest 3, 4, 5...  Now, I know I can use a custom variable to carry out this part. I can create a varaible user as pretest_score and set it as the 0 at the beginning of each test; Let him do the math all what the learner answers a question slide. Then at the end of each test, jump at the base on the value of the pretest_score. So for the post-test, the pretest_score will be set as 0 once again, and the culculation will start from 0. It will also generate a report page personalized report on each pre-test and post-test scores.
  • However, we want to be able to pass only the final score on the post-test of the LMS. Since I read that most of the quiz variables is read-only. Is there a way I can get around this? Is there something in the package SCORM that I can change the variable I created for that I can pass the value of the variable from the LMS?

  Any suggestions would be very helpful.

  Thank you very much.

  Hello

  I do not describe it in blog posts, but you could also set the scores from the pre-test to 0 question slides and follow these scores with a user variables and advanced actions. In this way the total score will be only the scores of the final test, where you attach notes to those question slides. Only one bad thing: the total number of questions will have questions included, same with the number used in the progress indicator. You will need to avoid showing those numbers to the user, but if you can live with that, might be easier to create custom question slides.

  Lilybiri

• Score reports

  Hello people
  I have a lot of tables, with several partitions of each:
  
  SELECT table_name, nom_partition
  Of user_tab_partitions
  ORDER BY 1;
  
  My partititions are in the following format:
  P2009W01-> weekly scores
  -> Monthly partitions P2009M01
  P2009Q01-> quarterly partitions
  P20090307-> daily partitions
  
  I need a report that will read the above formats (channels) and view a report of the partitins, if it is weekly, daily, monthly or quarterly
  
  for example:
  
  period of nom_partition table_name
  -----------------------------------------------
  quarterly_tab quarterly P2009Q01
  monthly_tab monthly P2009M01
  ...
  
  So I guess I should do something: If the 5th character th is Q, print quarterly, and so on.
  Case, decode?
  
  Thanks in advance for your help

  I'd be more explicit on the bite any and so identify all partitions do not correctly named

  select  dtp.Table_Name
         ,dtp.Partition_Name
         ,case
            when dtp.Partition_Name like 'P____Q_' then
              'Quarterly'
            when dtp.Partition_name like 'P____M_' then
              'Monthly'
            when dtp.Partition_Name like 'P____W_' then
              'Weekly'
            when dtp.Partition_Name like 'P________' then
              'Daily'
            else
              'Unknown'
          end Partition_Type
  from    dba_tab_partitions  dtp
  where   dtp.Partition_Name  like 'P____%'
  and     dtp.Table_Owner     =  :p_Schema
  and     dtp.Table_name      not like '%$%'
  

  Published by: bluefrog on July 2, 2010 14:27

• How / where to report bugs on Thunderbird?

  I can't find a bug reporting site/contact info. I find only references to community support forums, etc. I found a bug, I want to report, and I guess that Mozilla wants to know about it.

  I found the answer myself, should have been a little more patient...

  Bugs are reported (of course) to:
  https://Bugzilla.Mozilla.org/

  Sorry for the wasted bandwidth.

• 2D axis graduation Bug in reports (Tiara 2014)

  Hello

  I ran across a rarther annoying bug in 2D for reports of scale axis.  Here's how to recreate:

  1. Load a dataset that contains the x and y components.
  
  
  2. Create a new presentation in the report tab
  
  
  3. In Sheet1, add a Simple 2D axes system.
  
  
  4. Select x and y of the dataset object and drag it in the 2D axis system.
  
  
  5. Change the scale of "Completely automatic" to "manual".
  
  
  6. Change the number of "Begin" to something near the tiara set by default.  Do not touch the number of 'end '.  Click OK.
  
  
  7. Add Sheet2 and repeat steps #3 to #6 on Sheet2 with a different dataset.
  
  
  8. The two parcels well look now...
  
  
  9. Go to Sheet2 and double click on the map to reveal the curve and the definition of the axis.
  
  
  10. Do not touch anything... just click on "Cancel".

  After you click Cancel, the scale of the axis 2D completely changes.  I think what is happening is that the tiara takes everything the previous issue of 'End' was and who uses instead the number of 'End' you want.  In addition, you have not actually to enter the curve and the definition of the axis to create this bug.  Press cancel if you change something like text (for example)... curious bye bye.

  Also, if I go back the and redefine scaling on automatic mode, click Preview to update the plot, then opt for the manual mode, all seems good.  However, if I copy Sheet2, the plot on Sheet2_Copy1 is messed up the same way as if Sheet2 is OK, but I hit Cancel.

  Worse still, the undo function does not work on this unwanted change of scale.

  This is a bug that makes plots in the report almost unusable files.  I hope it's re-producable on other systems if a patch can be issued.  Let me know what you find.

  The only solution I found is to click OK instead of cancel, which is not always preferred.

  Thank you

  Jacob

  Hello jrasco,.

  You are right. There is a bug in DIAdem 2014. We have set for the DIAdem service pack.

  Here is the link to the 2014 DIAdem English SP1

  Thank you

  Walter

• Where is the appropriate place to report bugs of BerkeleyDB?

  If I have possible the BerkeleyDB bug and want to report it, where is the appropriate place to do so? I have been unable to find another place outside this forum...

  If you have a support contract with Oracle, then report it to your support person.  Otherwise, this forum is the place to do it.

  Lauren Foutz

• Bug? : cannot execute predefined "last awr" report with the latest version of the SQL Developer

  Using sql developer before 4.x... report works fine

  Using SQL developer 4.0.0.13... report fails with ORA-01422

  using the actual query to generate awr against the same range of component snap works perfectly

  I opened a SR on the question

  Thank you

  It's always a good idea to open a SR when you are able.  I assume that you have already received a response from support.  For others I wondered about this, the question is likely related to running the report against a CCR environment, as indicated in the following bug:

  Bug 18132564 - LAST AWR REPORT FAILS WITH ORA-01422 IN CCR ENVIRONMENTS
  

  The call of the AWR report requires parameters for a DB and an ID of Instance, so that the report should run, as in earlier versions, for only the current instance, or be modified to run all instances in the cluster.

  Kind regards

  Gary

  SQL development team

  P.S.: And, in fact, a discussion prior forum - ai2 4.0-AWR and ASH giving ora-01427

  lead following bugs are connected and supposed to be fixed for SQL Developer 4.0...

  
  

  Bug 17481944 - PERFORMANCE PANELS NEED AWR/ASH/ADDM FOR RAC ENVIRONMENTS SUPPORT

  
  

  ... with the developer commenting

  I've added a number instance selection control to the various reports: ASH,.
  AWR, difference and SQL. The control is supposed to be visible when the
  connection is a RAC system, tests should a RAC.

  So if you are not on a RAC system, or are on CARS but do not see the selection number instance control, please let us know.

  Post edited by: Gary Graham

• Bug quiz percentage from 60%?

  Hello

  "Y at - it a bug with the quiz in passing percentage when it is set to 60%" and when the user gets exactly 60%? Or am I missing something?

  1. create a question with 5 questions pool

  2. Add 5 quiz-courses

  3. set the percentage of deaths to 60%

  When the user answers to 3 of the 5 questions correctly, it infiltrates the message that it is not passed.

  -> when I change the percentage of passing at 80% and that you answer correctly, 4/5 questions then I works very well.

  -> When I do not work with percentage, but with points (30/50), then it works fine also.

  The problem seems to occur only with the number "60" as far as I can tell.

  Any thoughts?

  Thank you

  Christophe

  

  

  I confirm, it does the same thing for me.  And no matter if I go back issues of the pool in the main project. Same result.

  If I set the passing score to 59%, then it will pass.

  I think it is a bug and you should report it as such.

• beta test results reports

  Hi all
  I took two beta exams lately: 1Z1 053 (11g Administration II) and 1Z1-054 (11g Performance Tuning). 1Z1 - 053 beta period ended 10 weeks ago (so the results are due), for 1Z1-054 everything recently.
  Now my question is: How do I know if I passed these exams or not? So far, I look at the page history of Prometric candidate periodically, but I understand that this page will be unavailable for the Oracle exams in two weeks. Or should I get an email notification (I was not informed when I passed two beta exams last year)?
  
  Sorry if this question has been answered before, I have not found in the FAQ.
  
  
  Best regards, Christoph

  Partitions beta review: I will address all 4 tests beta exceptional here when well even you asked only about 2.
  -053 and 206 beta scores should be available on the website of Prometric on 16 September. Paper score reports will be sent before September 20. You must ensure that your mailing address is updated in your profile prometric.com.

  -144 and 054 score reports will be provided by Oracle. The delivery date is not yet available.

  -Prometric has insured that if, for some reason, candidates receive no reports of scoring for the beta exams they were taking to Prometric, candidates will be able to contact Prometric after September 25 and Prometric help - except for 144 and 054 reviews. Candidates should contact Oracle for those.

  -If you are not able to receive a copy of your report of results for some reason, you can still receive your result of review of [email protected]

  Certificates queue time: We hope that this will reduce Pearson view. However, a part of the wait time is the duration during which some countries take for mail to be delivered. We suggest you to that you allow up to 4 weeks to receive the certificate from where it is sent by mail. Often, it does not take 4 weeks, but sometimes it does.

  Translations of the page: Unfortunately, this has been a problem for us - to ensure that the pages of all countries are compatible with US pages. If you find inconsistencies, send them to [email protected]. We have recently worked on a new process with the web team to ensure that the updates are compatible, but I'm sure there is little clean-up we have to do. We will take a glance at the pages of reference and you ensure that these updates are facts. Thanks for that bring to our attention.

  Kind regards
  Brandye Barrington
  Certification Forum Moderator
  Manager certification program

• yet another serious UI editor bug

  Hello NO,.

  I just ruined my last book when CVI crashed. I have reproduced this behaviour twice.

  Here's how:

  (1) in the user interface editor, create a new ring of built-in menu (I'm not investigating other ring controls)

  (2) open it to change the attributes of the ring

  (3) open the Edit value/label pairs

  (4) do not enter anything, simply press OK

  (5) press OK to leave the Panel change Ring

  (6) throw control

  You will find that the CVI disappears (not save unsaved files).

  I have not studied whether changes in this procedure would also result in a crash.

  So much for today,

  Wolfgang

  Hello Wolfgang.

  I was able to reproduce the issue and filed a bug with ID 285633 report.  As a solution, you should be able to programmatically set the name of long Panel instead of setting, it is so long in the user interface editor.

  I'm sorry for the inconvenience,

  NickB

  National Instruments

• where to submit bugs / improvements

  Hello

  I wonder if there is a place dedicated to minor or major improvements or supposed bug... In the past, I did it in this forum, but it might be a bit boring for others? Also, I expect a response to OR if reports of some unexpected behavior, etc., while in the forum not all entries can be filled.

  In addition, it might be useful if there is a site featuring all the officially recognized problems - it would help if you meet a 'strange' and this behavior already listed there - or not.

  Recently, I learned from this link (and not hidden) where to submit feature requests, and I thought of something similar... It does not exist, or it would be possible to implement?

  Of course, I can send annoying comments here, too, such as: in the target generation/settings/Version Info the checkmark label should read "Preview Substitutions' instead of"Substitutions Prevew":-)

  Wolfgang

  Fake Hello,

  You can always ask here about the State of any bug or suggestion. I don't know if we always do, but we do not usually post the bug report ID so that you can ask about it later. But even if you do not have the bug report, you can just a link to the original discussion forum and we should be able to track it down.

  Regarding the general question to all available outside current known issues, it is a request that we have heard and we hope to eventually get there, but it is not a trivial thing. Our current bug report database has a large number of items that refer to internal issues only (i.e. problems found internally on the versions not released CVI) and also contains the questions duplicate, trivial problems, non-bugs (tasks), false alerts, reports of bugs that have not yet been considered, etc., etc. It is not a trivial task to filter the "known issues" that are relevant to our users, as well as determine exactly all versions of the product that have the bug. For example, create a list of corrections that you see when a new version of the CVI is available is always an intensive process of enough work, but it's doable because tracking of fixed bugs is very different, followed by outstanding issues.

  That said, we have not given up the idea, and we hope to eventually do something like this, because we are aware of the usefulness, it's customers.

  Luis

  NEITHER

• Possible bug found in hyperlinkctrl.c when you use the "VAL_POINTING_FINGER_CURSOR" mouse cursor in your own user interface.

  Hi people, I think I found a bug in the hyperlinkctrl.c custom control, after the update/upgrade an old project CVI.

  I found when I started using the "VAL_POINTING_FINGER_CURSOR" mouse in my UI, when adding a new hyperlink control.

  The error is recoverable error: ' from the mouse cursor is not valid.

  This error breaks in RunUserInterface (never seen anything like this before and I use CVI since version 3.1).

  This happens whenever I mouse - hovering anywhere on the Panel that contains the new hyperlink control.

  I also had a hack temporary to solve the problem, for now, I'll pass it along to this announcement...

  The hyperlink control's source code is located in \toolslib\custctrl\hyperlinkctrl.c

  The bug/problem lies in the service of reminder (of HyperLinkPanelCallback), specifically in lines 460 to 465.

  This hyperlink control wants to use the VAL_POINTING_FINGER_CURSOR as its default cursor when you hover over the custom hyperlink.

  However, if you already use 'VAL_POINTING_FINGER_CURSOR' in your user interface, the branch which verifies that you use what he thinks is 'his own' thread-safe mouse cursor ID, so that can reset it by using his "token concatenation" - created macro "GetTsvCursor", is not an 'else' branch to protect the picture when you actually use the cursor pointing finger... where the error that the mouse cursor is not valid. Here is the snippet of these lines.

  The mouse is not over a hyperlink
  If (cursor is VAL_POINTING_FINGER_CURSOR)
  {
  Reset the cursor to the previous cached cursor
  cursor = GetTsvCursor();
  errChk (SetMouseCursor (cursor));

  ... etc...

  }

  So my hack was to change the type of cursor to "VAL_CHECK_CURSOR" in place and place the cursor of "VAL_POINTING_FINGER_CURSOR" in three locations in this function, then rebuilt files x 86 and x 64.

  Hey Luis, finally win a free T-shirt of LabWindows/CVI with not only have reported this bug, but also to give the precise location of the source, as well as a work around?

  :^)

  JB

  In the meantime, I have submitted a bug with ID #545203 report to track down this problem.

  -Johannes