GH22NS50 LG Super Multi Drive

Similar Questions

• Sat Pro L10 DVD Super Multi Drive

  I have a new Satellite Pro L10 with DVD Super Multi player running XP Pro. I was not able to write on the DVD player - either it does not recognize the DVD in the drive or it blue screens and crashes when I use the Windows backup installation until I read the error message. Now I get very nervous, I could not support the 6 weeks I got it...
  I can play the pre-recorded (of movies) DVD in the drive and it can read CDs and some brands of DVD. The manual is singularly useless on the use/troubleshooting of the Super Multi drive

  Hi Christine,

  I don't think you can use the Windows backup to record directly to CD or DVD. The following is an excerpt from the Microsoft web site: -.

  • .......... Unfortunately, the Windows backup utility cannot save files directly to a CD - RW disc.

  Have you tried the software to burn DVDs. I think that you should have Sonic RecordNow and Windvd.

  HTH

• Satellite L10 DVD Super Multi Drive - E/s of entry Error Message

  Does anyone know why, when I try to play a CD or CD-ROM, I get a box saying i/o error of entry?
  I have a Satellite L10 with a DVD super multi drive. It can read DVDs and DVD ROM

  I thought maybe it was a cable connected the drive itself, but if it's that I need how out of the car and how to support.

  I tried updating the driver and uninstall it then reinstall the drive, but I still have the same problem.
  Cannot use the accompanying software as is all the cd.

  Please can someone help me.
  Thank you

  Hello

  In most cases the entrance of e/s, error message is related to a hardware malfunction (CD/DVD drive).
  The readers of the lens laser can not calibrate properly and therefore it can not read the CD inserted.
  These errors are not uncommon and occur mostly after a long period of use due to a material stressed.

  But let's check the last possibility of solution;
  Go to Device Manager and remove the drive from the list of devices CD/DVD.
  Then start the registry (regedit) and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Then, restart the computer and check if it of possible to read CDs.

• DVD Super Multi Drive problem - cannot access any CD - Satellite A100

  Hi, 1st post:

  My Satellite A100 features a DVD Super Multi drive, which worked very well. However I cannot now access any CD - error message ' D: / is not accessible. The request could not be performed because of an i/o device error."is displayed.

  However I can still access DVDs without problem. Can anyone help?
  Thank you.

  can try this
  Right click on the drive w / the problem
  Properties
  Recording tab
  and then check the box "enable recording on this CD player.

  If this does not solve it you have Roxio Easy CD Creator is installed to check this
  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 315350

  or if you get an I/O device error message, this problem may occur when Windows tries to use a transfer mode that can not use your CD player
  RESOLUTION
  To resolve this problem, change the transfer mode for your CD drive in IDE channel properties. To do this, follow these steps:
  1. Click Start, right click my computer and then click on manage.
  2. under the (Local) computer management, click Device Manager.
  3. in the right pane, expand IDE ATA/ATAPI controllers.
  4 right-click the channel where your CD drive is connected, and then click Properties. In general, this channel is secondary IDE channel.
  5. in the Advanced Settings tab, in the zone transfer Mode for the device that represents your CD-ROM drive, click PIO only. As a general rule, this device is device 1. And then click OK.
  If the problem is not resolved after you change the transfer mode for the secondary IDE 1 channel device, your CD drive should not be located there. Use the same procedure to return to the DMA transfer mode if available. Then, repeat these steps to change the transfer mode for IDE devices in the following order until the problem is resolved:
  Primary IDE channel, device 1
  Secondary IDE channel, device 0
  Channel IDE primary note, device 1 is connected to your boot disk. It's the hard drive that contains your operating system.

  hope that fix you :)

• Don't burn DVD Super Multi Drive no CD

  Carpet * a DVD Super Multi Drive not burn a CD but DVD
  Burn - no problem

  Hello

  Try to remove the drive from Device Manager. After the start, the player should be recognized. Check if this procedure will solve the problem

  Good bye

• Satellite A300-1NO: super multi drive does not work

  Hello again.

  I have a big problem (as every day since I have this laptop).
  My DVD multi writer rarely does not work.

  When my system starts up, it works very well, and he can read everything, no problem.
  But after several hours, it is simply not open.

  The orange LED flashes for a second, but do not open it.
  When I restart my sytem, everything works well again... What do I do? It is so boring.

  It's on my desktop, I do not...

  Hello

  If the CD/DVD drive is not ejected automatically by pressing the button and then try to open it manually using a small thin object. Insert it into the tiny hole near CD. Diving DVD eject button.
  This should allow you to open the ODD.

  But if it will always happen, then I recommend you contact the ASP in your country in order to verify this CURIOUS.
  Maybe the drive needs to be replaced

• Satellite M40-185: DVD super multi drive does not read the CD

  I own a Toshiba Satellite M40-185. It is mounted with a carpet * a DVD-RAM UJ - 831S.
  When I put the CD - R, which are supposed to work on this drive however it read as a CD - R [i.e. the icon changes from DVD - RAM drive in my computer to a CD - R]

  However, when you double-click the drive it says D:\ accicble not. But it works fine with DVD.
  Recently, I found that it stops between buring DVD as well. I got the replaced disk from Toshiba, but it was not to last long either.
  I wonder if his software level problem.

  I tried to update the firmware but it does not work because it's another drive for this what is mentioned on the website for drivers...

  Maybe it s only a registry error?
  I read different statements here in the forum and especially the deletion of in the upper and lower registry filters helps to address these issues.

  For more information, see this page of Microsoft Knowledge:
  http://support.Microsoft.com/kb/270008/en-us

  Completely remove the Upperfilters and Lowerfilters from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  and then restart the laptop

  Good luck

• LightScribe Super Multi drive

  How is - a remove the CD/DVD to a Pavilion dv9908ca PC portable player?

  Thanks for any help!   :-))

  Hello

  Yes, it is almost certainly the setscrews.  It is also generally deeper than any surrounding screws off.

  Kind regards

  DP - K

• Qosmio G20-126 where I can buy DVD Super Multi (Double Layer) drive?

  Hello
  Can someone help me and tell me where I can buy DVD Super Multi (Double Layer) drive
  DVD model: UJ-846-C flop in 12.7 mm
  Qosmio g20-126

  Thank you
  :)

  Hello

  Have you tried to search some online dealers that provide this part?
  In addition, you could contact a certified maintainer Toshiba in your country to order this part.

• Satellite M60 - 164 need Win 7 driver for Player DVD Super Multi TS - 632B

  I have a portable satellite m60-164, I put windows 7 on it and windows does not recognize as a multi drive only a dvd - rw.
  can someone help me find a readers who works on Windows 7?

  PLEASE

  Hello

  I completely agree with Akuma. Windows 7 supports and include clean driver CD/DVD from Microsoft. If the optical CD/DVD drive should be automatically recognized by Win7.

  You see the ODD in Device Manager?
  If there is a yellow exclamation point, remove the ODD of Device Manager, and then restart the device after restarting again the laptop must find new device and should recognize this.

• DVD Super Multi (Double Layer) drive does not not in Satellite A200 - 1 M 4

  In A200 - 1 M 4, suddenly DVD Super Multi (Double Layer) is not in operation.
  In Device Manager, the device is listed with an exclamation mark?

  I tried to restore the system, but the system restore does not work also.

  Operating system is Windows Vista.

  Kindly help me to solve this problem.

  Concerning
  Kamal

  Hello Kamal

  The solution under Windows XP Home edition is known to me, but I never had the opportunity to check it out on Vista. If you want a quick solution to recovery DVD and reinstall Vista.

  And of course, don't forget to backup all your data before doing this.

• Super USB Drive - need to make a CD

  Just bought a Super USB Drive and the need to take a .wav file and put it on a CD to make it work in any CD player. So far, no luck. Simple instructions, please, I need to get the CD done immediately to a contest.  Thank you!

  You need to create a music CD.  To do this the .wav file in iTune import and convert it to .mp3.

  

  Then select the mp3 file and create a new playlist from it:

  

  Finally, burn the playlist to disk:

  

  

• Satellite Pro A100: Mat * a UJ - 841 s DVD Multi drive does not

  Hello

  I have a Satellite Pro A100 with a carpet * a UJ - 841 s DVD Multi Drive.

  Recently, I decided that as my laptop is running slowly I wanted to format and reinstall XP Pro, I used a standard version of OEM XP Pro (not seller specfic) and he went on the formatting and the reconstruction of my laptop.

  Fortunately, I used Acronis True Image to backup my laptop before I did that my above mentioned dvd player is so more to bury properly (all the drivers and the necessary software has been installed). Before I formatted the laptop I could burn on + and - DVD (r, rw and ram) now that the laptop has been rebuilt, I can only burn to dvd-r/rw/ram.

  I restored from my laptop to the picture created by Acronis and can use the drive normally again to burn + and - DVD.

  Does anyone know why this would have stopped working in the new installation of Windows? I also tried to create a virtual machine using the same xp disc but it always gives me the problem of dvd player.

  Thank you

  Rich

  Hello rich

  Have you noticed the same problem after using Toshiba designed recovery DVDs?

• Can't turn on my XP computer, includes a multi driver error

  He has a multi driver error I can enter the command prompt, but it doesn't let me do a chkdsk r he says he's busy and just a chkdsk there doing nothing, but does not go into windows? any suggestions

  Hi JeannieBellLW,
   
  -What exactly happens when you try to boot into normal mode on your computer?
  -You receive an error message? If Yes, indicate the same.
  -What has been the recent change that was made on your computer before this problem started to happen?
   
  Try to start your computer in safe mode and check if you can successfully start.
   

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  Refer to this article to do the same thing:

  A description of the options to start in Windows XP Mode

• The dvd burner super multi also burn CDs?

  looking to buy a series of dv6tqe and it is currently being upgraded to the burner and blu - ray player super multi DVD. I'm more interested in burning CDs of music and DVDs to watch blu - ray, can the super do both or just burn the DVD?

  Both