bugfixes LV 2009 RT SP1

Similar Questions

• LV 2009 SP1 Build error OR

  While trying to do a build on LV 2009 SP1, I get this error:

  The build failed.

  An error occurred during the recording of the following file: Sample.VI

  Details:

  Visit ni.com/ask support request page to learn more about the resolution of this problem. Use them following as a reference: 1 error this is produced to AB_Source_VI.lvclass:Close_Reference.vi-> AB_Build.lvclass:Copy_Files.vi-> AB_Application.lvclass:Copy_Files.vi-> AB_EXE.lvclass:Copy_Files.vi-> AB_Build.lvclass:Build.vi-> AB_Application.lvclass:Build.vi-> AB_EXE.lvclass:Build.vi-> AB_Engine_Build.vi-> AB_Build_Invoke.vi-> AB_Build_Invoke.vi.ProxyCaller

  Possible reasons: LabVIEW: an input parameter is not valid. For example if the input is a path, the path can contain a character not allowed by the operating system such as? or @. = OR-488: command requires GPIB controller charge controller.

  Note that I do not use any GPIB. Also when I build the project NAV 2009 (without SP1) on another computer, I get no error. Any ideas?

  An Application (EXE). Now what I've done is removed the previous generation in the project framework > My Computer > specifications build and created a new Build > Application (EXE). And he built successfully!

  Now, of course was was wrong the first time... but it works now. Thank you!

• LabView 2009 Service Pack 1 does this cause a problem with the MAthScripts for lo

  All,

  I just installed Service Pack 1 for Labview 2009.  All of my code that loops in my MathScripts now lets my MathScripts does not compile.  Have a clue what I do?

  Thank you

  Rich

  Windows XP (32-bit)

  LabView 2009 uninstalled, reinstalled after you have removed all files related to 2009.  SP1 installed, then applied for LabView and MathScript.

• Try to install SP1 causes computer crash

  Long story short, SP1 crashed the computer, does a full restore to factory settings.  Tried 3 times, same result.

  Now the SP1 is listed for install again in the updates... I'm leary.  I know I don't have it support it I have not installed SP so what do I do?

  Have updates installed with a date since April 2009, when SP1 is released would interfere with the installation?

  Anyway to figure out what is the issue?

  * original title - if you install Vista SP1 now in 2010, with others having been processed since SP1 updates came out in 2009 affect the install? *

  Other updates should not cause this problem, even if they should all be installed in the order.

  Try to install manually instead of through Windows Update.  Go to http://www.microsoft.com/downloads/details.aspx?FamilyID=b0c7136d-5ebb-413b-89c9-cb3d06d12674&displaylang=en to get the download and see if that makes a difference.

  If this does not work, try a boot minimum http://support.microsoft.com/kb/929135.  If the problem disappears (if the installation work) then it's just a matter of tracking down the culprit at the origin of the problem (or you can be happy, the installation worked and not find the cause of the trouble and just restore the system to normal and restart - which is probably what I would do).   Follow the procedures described in the article.  Once found, remove, delete, disable or uninstall.  Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

  Also read and execute the steps ofhttp://support.microsoft.com/kb/971058.

  If this does not help, please transfer your question in Forum Windows Update:http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where updates experts will be happy to help you.  Please post with the information requested here:what to post in the Windows Update forum

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Run the than SP1 2012 LabVIEW VI user on Windows 2000 machines created

  The VI working on (on Windows XP) will have to be implemented on computers different 4: 3 with Windows XP SP3 and 1 with Windows 2000 SP4. This is a new program for us, so we bought LabVIEW 2012 SP1. This version of labview works on Windows XP, Vista, 7, & 8. The corresponding runtime engine runs on Windows XP, Vista, 7 &. As you can see, Windows 2000 is not listed here. I tried to build in an .exe file, but there are corresponding RTE. Is it possible for me to be able to run my VI on the Windows 2000 computer? (Of course, the upgrade of the OS would be a solution, but I would like to avoid this, if possible).

  [I've been messing around with runtimes and the most recent version that could install has TENS of LabVIEW 2009 (no SP1) on the computer running Windows 2000, if that helps at all.]

  Dennis_Knutson wrote:
  Build an exe for 2009 would require you to have a copy of LabVIEW 2009, end. I don't know if your 2012 license would even allow that and if you use some of the features, you will not be able to do the conversion down.

  If you have a license for a version of LabVIEW, you can have every (Older) version installed as well.  You need an active SSP to upgrade well!

  All the new features migrate at least 8.0 (you will get a bunch of warnings in guard and perhaps a very ugly code).

  I would try to avoid support queues (or config file functions) over the limit of 8, 6-2009.  You may see some unexpected changes and prefomace hits.

• Satellite P500 - keys open 'find' / 'search' - number NOT used

  * information system *: BIOS Version/Date TOSHIBA V1.60, 26/05/2009: Vista SP1: windows explore 8: 64 bit os: laptop Toshiba Satellite P500: computer is less than 1 mth old

  * Problem *:
  1 keys not 'use' numbers... when any number on the numeric keypad is indexed it activates the field 'Search' or 'search' to the program I use.
  2. keypad digital won't "unlock" - light is always turned on.

  Example: If you are using IE8 the field 'search' active that if you pressed Ctrl + F or in other cases (using software), the window opens as if you clicked the icon key windows + F.

  I guess I have activated a hotkey of somekind... or...?
  I can't associate this problem with any program installation or update - had not done anything when I first realized my number of buffer problem.

  Windows Vista SP1 - explore 8-64 bit os - computer toshiba satellite P500 laptop. Computer is less than 1 mth old

  + Thank you for your help +... I really miss my keypad use and it is frustrating to have close the active window/tool "Search/search"

  I'll probably need the KISS method - I am not real computer savvy.

  > 1. Keys not 'use' numbers... when any number on the numeric keypad is indexed it activates > field 'Search' or 'search' to the program I use.
  > 2. Keypad won't "unlock" - light is always turned on.

  Maybe your first question has something to do with the second point and the fact that you can not unlock or disable the numeric keypad.

  Have you tried to activate and deactivate the keypad or by pressing the NUMBER lock using?
  Check it!

• Question of LV 2009 SP1 EXE Builder

  Hi guys:

  I found the exe file, built from LV 2009 SP1 can be easily extracted with WinRAR, I can see all the main or sub - VI, is this a bug? or a risk of setting? I have not found the same problem in LV 8.6,

  Thank you

  I don't think that you should think about a lot of it. One of the first discussions on this subject is here http://forums.ni.com/t5/LabVIEW/decompiling-2009-executable/td-p/991662. It is true that they will be able to extract the screws, but they will not be able to see, any more than you show in your program.

• LabVIEW 2009 SP1 image ROI identification number?

  In BT 8.5 (Vision), several Kings had displayed beside them identification numbers:

  

  Apparently not so much more in 2009 SP1:

  

  The only difference between the two screws is that I used a classic image object and I am now using the modern version; and the image tool window is replaced by the image associated with the picture tool palette. There is no property of the image I can find to activate the return on investment 'Legends' or not.

  How the user is supposed to know what return on investment is that?

  Oops...: indeed. I checked my LV 8.5 code (actually written in BT 6 or whenever the first control of the Image has been released) and I overlay numbers KING myself right here!

  Given that I had used at the same time of overlay to get return on investment numbers, I've just reinvented the wheel... twice.

  I still think it would make sense to access this feature by default in the Vision Toolkit.

  X.

• LabVIEW 2009 SP1 crashes when moving large selection with the arrow key

  If I select a lot (10 or 15) diagram components and try to move some distance with the arrow button, I'm often a program crash.  Because a reduced number of components seems to hang after a longer distance traveled, it looks like some sort of buffer overflow error.  I don't see this problem when you use the mouse to move selections.

  I checked to make sure I have the latest version of the video driver for my NVIDIA Quatro FX570.  I also tried to work with no hardware acceleration and no handset, written.  What happens on Windows XP SP3 with all current updates.

  It became so bad that I have to do a save as every fifteen minutes to avoid losing data.

  Why not use my mouse for all movements?  Because it is not as specific and not so easy to limit to only one dimension of the movement.   My hand is not as stable as it once was.

  I'm hoping someone will have a suggestion that will clear up this problem.

  As I have indicated, I had the same problem with 8.5 and just DID a new install of Labview 2009.

  Since it is possible that my three monitors configuration, which of course requires more memory video, may be at the origin of the problem, I am satisfied with workaround by dragging the objects closer to their final destination and then using the arrow keys.

  Three monitors are ideal for the front, block and help/Internet/probe damaged.  When I got to work in the field with a single monitor, I felt severely handicapped.

  You can consider the issue closed.

  Thank you for trying to reproduce the failure.

• "Decimal string to Number.vi" bug in LabVIEW 2009 SP1

  The "decimal string to Number.vi' seems to be the conversion of the input data in the type int32 internally even when the input tape in vi data is expanded floating point (no points of constraint).  This is causing me grief.  See attached vi

  This bug is still present in LabVIEW 2010?

  Thank you

  Richard Ballantyne

  There is no bug. You use the wrong function (see Help) If you want a floating point output. Use Fract/Exp string to a number.

• How to remove the scrollbars Panel sub with LabVIEW 2009 SP1?

  I did a search and found this thread on the subject: http://forums.ni.com/t5/LabVIEW/subpanel-scollbars-in-labview-8-0/m-p/284503/highlight/false#M149983

  I double checked that the horizontal and vertical scroll bars have not been successful in the appearance of window customize and they were not retained as shown in the image below.  You see scroll bars villain in the façade of the image at the bottom.  Of couse, since the code / sw cannot be shown, it has been repainted but you can still see the scroll bars along the frame of the side panel.

  Custom window appearance settings:

  

  Scroll bars appear at the bottom & right panel sub frame

  

  Found the solution...

  Right-click the scroll bars and select horizontal scroll bar and select always off.

  Repeat the procedure for the vertical scroll bar.

  

• LabVIEW 2009 SP1 - incorrect icon in connector component palette

  
  

  This was actually recorded under CAR # 116251 a long time ago. That being said, I can confirm that R & D is aware, but I feel that it is pretty low on the priority list...

• LabVIEW 2009 sp1 not having replied to the questionnaire / accident

  Hello

  I seem to have developed a problem with LabVIEW, in which case it freezes at a random point during execution. It is not a matter of a VI gel, rather LabVIEW itself stops working and has closed by the Task Manager. What I have running at the moment is a VI host that sends and receives data over a TCP connection to a target in real time on a PXI system. The real-time application continues to operate after the crash. The host system is also running control of 3D image showing some basic graphics. The entire system is controlled at a higher level by a program crushed in c# via a TCP connection, but can work alone. When you run stand alone the problem will not occur.

  The communication between LabVIEW and c# works very well, but at a random time during the operation, LabVIEW freezes while c# continues to work. This does not appear to correspond to a particular action by the c# program. I guess my question is, is there any likely culprit by which LabVIEW can be crushed by an exernal program where the only communication is via TCP, which seems to work very well and where it does not seem to be excessive memory or CPU usage?

  See you soon.

  Fixed a problem with an update of the graphics card driver.

• early 2009 macbook bluetooth driver for win10

  Any idea on what kind of Bluetooth dongle/interface, we have in the beginning of 2009 2Gz white MacBook Core Duo?   I had to get a new HD for my aging MacBook so I decided to do a clean reinstall of OS X El Capitan and win10.

  1: first of all, did a clean reinstall of Mac OS X, made various update

  2: then partitioned the FAT partition w / Boot camp 6.0.1

  3: install win7 w / drivers 4.0.4033 Bootcamp.  (I think this is the 'new' set of drivers for boot camp for my antique MacBook.)    Updated in sp1 EXCEPT display drivers.  (Stick to the driver boot camp 4033)

  Everything seems to work fine in win7, at least when I look at the Device Manager, there is no exclamation point or something funky.

  4: upgrade to win10.  Updated for the latest updates which seems to have updated my display driver, but seems to work very well.   Now I have blue tooth is not recognised within the win10 devices.   Any idea?

  Please search for generic drivers of BT for the W10.

• Bluetooth - HP Touchsmart IQ772 Vista Home Premium SP1 software license file

  A couple of weeks, I installed Driver Max and update the outdated drivers, blutooth, among them, identified by Driver Max, on my HP Touchsmart IQ772, Vista Home Premium SP1.  Since last week, I get this message every time I have log on or restart my computer. File not found Bluetooth software license. [2]. what this means and how do I stop this happening again?

  Thank you.

  I had the same problem after a registry cleanup on my touchsmart iq518a, don't know why it worked, but I fixed it by clicking programs and features in the control panel and uninstall the program "HP bluetooth." Everything still works perfectly and that the annoying message is no longer happens.

  Hope this helps

  Carpet

  Message edited by Knobby_103 on 04/24/2009 15:03