Build an array of several bays

Similar Questions

• Save several bays of nested loops

  Hello

  My vi generates several bays in each iteration of the loop, and I would like to save the data. I did work with the files before recording, but it's never with nested loops. I don't know how to keep the information of the iteration of one loop at the other. I would like suggestions. I made this sample & simple vi (attached file) that simulates the question I have. I have a file with a time column and different columns of food beside him.

  The first question I have is that I generate the time table only once, but a table of signal several times, so how can I keep the time table to drop several times? The other question, as stated above, saves the data in the table signal getting lost in the nested loops...

  Thank you

  A

  1. the first element of the first matrix signal IS always zero.  The Signal to simulate always starts at zero.  You compare it to the indicator of "first date".  Who got by converting the dynamic data type to a scalar.  And it's always the last element of the actual data.  And since the "first out" is replaced with each iteration of the inner loop, the number you see at the end is actually the latest iteration of the data.  Look at "First release" in comparison with the last element of your last column of the table and you will see they are the same.

  2. the reason why you have a first column that consists of the steps is because that's what you have wired to initialize the shift register.  If you look at my example, you will see that I have an empty array.  (The zero is gray.)  You, the 0 is not dimmed meaning there is an element.  Expand this table to view more items and expand the digital field and you will see more digits.  They correspond to what is in your first column.

• hitTestObject with several bays

  Hello!

  I made a game and have a few problems

  I want to do a hitTestObject between several bays, I tried something like this:

  for (var i: Number = 0; i < array1.length; i ++)

  {

  array array1 [i] there-= 10; Moves an object to the top

  for (var a: number = 0; i < array2.length; a ++)

  {

  If (array1 [i] .hitTestObject (array2 [i]))

  {

  trace ("hit!");

  }

  }

  }

  When I run it, something which will detect the collision and will display 'hit', but some who will ignore. I also noticed that some opposes in array1 stop running the code for moving (array1 [i] there-= 10) after I added another picture.

  My question is: is at - it a more efficient way to do this? Or at least a way so that everything works fine

  Thanks in advance!

  There is a more correct way to do it... No I have

  If (array1 [i] .hitTestObject ([a] array2))

• Build an array of values of the difference

  Dear members,

  With reference to the attached LabVIEW 2010 Student Edition file...

  From the incoming data via the .csv "Reading of the spreadsheet", I want to display a picture of the difference between the n and n-1 data value if the data set is 10, 20, 25, 35, 50, then the difference will be 10, 5, 10, 15.

  I used the "Index Array" function to extract the n and n - 1 values (using the function 'Simulation' as the incrementer line index) however I can't find the way to build an array of these difference values and display them in the façade, which is

  10

  5

  10

  15

  It will probably be a trivial problem for more experienced LabVIEW programmers.  Advice or assistance is welcome.

  Kind regards

  Since you have 1 column of 800 lines, then use table to Index first to get only the first column.  This will give you a table 1 d of 800 items.  Then the idea to use this table, as well as the subset of the table for the 2nd through the remaining lines, subtract one from the other, work.

  I can't comment on the simulation loops because I don't have that and never used.

  

• Merge several bays in object unique Array function

  Hello

  I have a multidimensional array database and I'm quite confused by bringing to the simple linear table. I know it requires some for loop to set the property and its value and some nested loop but I lost halfway.

  Please take a look at who follows and guide me how can I solve this problem.

  Thank you very much

  I have the following data

  records:Array = [0]
                      name = gender;
                      records:Array
                             [0] = male;
                             [1] = female;
  
  
                  [1]
                      name = count;
                      records:Array
                             [0] = 35;
                             [1] = 40; 
  

  I want to convert it into a single table as follows:

  records : Array =
                  [0] = [gender: male, count:35]
                  [1] = [gender: female, count: 40]
  

  If I'm following what you have and what you want, I think that the following is all you need...

  Here's what you say, you have:

  var records: Array = new Array(["male","female"],[35,40]);

  so to convert, first create a place to create new version

  var tempArray = new Array();

  Then, wrap around the table of records and create objects in the tempArray

  for (var i: uint = 0; i
  tempArray [i] = {sex: files [0] [i], count: files [1] [i]};
  }

  Assign then the tempArray either the documents table

  reviews = tempArray;

  confirm the results

  trace (records [0] .gender, records [0] .count);
  trace (records [1] .gender, records [1] .count);

• Several bays in P410 controller for presentation to ESXi?

  All,

  I have a server HP DL180 G6 with a P410 (512 BBWC) and 8x1TB the SATA drives.

  Final objective:

  (A) to create a single RAID 5 array w/hot or RAID50 table using all the physical disks

  (B) logically divide the RAID 5 / group RAID50 sparer < volumes 2 TB for presentation to ESXi
  
  The problem I have is that I can't find a way to make B) above work with the P410 controller. When I enter the RAID level configuration of the bios that I have options to create, view, and delete logical drives. Once I have do A) above, which seems to be the end of the road and I have no way to sculpt the space free until further forward to install ESXi. I also tried to use the configuration utility of the table offline (ACU) but don't see any options/benefits to the wire by using the configuration at the bios level.
  
  As you know, does not recognize ESXi > 2 TB volumes so I need to divide up to < volumes 2 TB before taking the step of ESXi.  Once I can do that, I'll create a volume of 10 to 20 GB for ESXi and several < volumes 2 TB until the remaining free space is used.  I will then use scopes to string together them in VMware.

  One of the solutions is to create a matrix RAID 1 on disc (2) and TWO RAID 5 arrays (3) disc to use all the disks.  ESXi sees so all of the logical volumes without problem.  I would really like to find a way to make B) above work so I don't have to lose the extra parity disks.

  It is not possible with the P410, or is there something that I am missing?  Any ideas would be greatly appreciated.

  Thank you

  Paul

  Hello

  I can tell you that we do exactly this map on multiple LUNS.

  It was done with the latest firmware and started the last Smartstart CD to access the ACU.

  Create a table, select all discs, when asked for a fair size "reduce." Then click on 'create the logical matrix' to build your second. Tip Smartarray license is not necessary.

• Build an array of clips

  Hello

  I have a main document class and a class array (among others).

  I don't know how to build the table however. Here is my attempt so far. But I get the following error code.

  TypeError: Error #1009: cannot access a property or method of a null object reference.

  to LetterArray / initLetters)

  at LetterArray()

  BugGoopFSGame() //This is my main document class.

  What I am doing wrong?

  Thank you

  Images of recommended

  in the main document class

  public var letterArray:LetterArray = new LetterArray (internship);

  in the array class

  package

  {

  import flash.display.MovieClip;

  import flash.events.Event;

  import flash.events.MouseEvent;

  import flash.display.Stage;

  SerializableAttribute public class extends MovieClip LetterArray

  {

  private var _stage:Stage;

  / * Here are video clips that need to go in a table so that they can be handled together.

  Classes A, F, G, H, I, N, O, S and T were created all dynamically by flash.*.

  Do I still need these here?

  public var a:;

  public var f: F;

  public var g:G;

  public var h:H;

  public var i: I;

  public var n: n;

  public var o: O;

  public var changement;

  public var t:T;

  public void LetterArray(s:Stage)

  {

  several = stage;

  initLetters();

  }

  private function initLetters (): void

  {

  var LetterArray:Array = new Array (a, f, g, h, i, n, o, s, t);

  }

  remains irrelevant

  }

  }

  You declare a bunch of objects, but you do not instaintiate them.

  public var a:;  declare but do not yet exist

  public var a: A = new A();   declared and there are

• TD230 embedded RAID, several bays?

  I use the controller RAID LSI embedded on board is equipped of connectors for 4 hard drives. I initially configured this server with a RAID1 mirror consisting of 2 hard drives, the operating system installed and put into production. Now the customer needs have changed, and I need to increase the storage capacity. My intention was to add two additional hard drives and configure a second RAID1 mirror. However, I found the MegaRaid management will allow only two new disks be of"relief" and does not allow me to create a second table. I tried to use the easy boot CD, so level Bios Manager, but both do not allow me to add another table, without destroing the original array. Who came across this and found a work around? Maybe a different Manager can be used? I would like to avoid unexpected additional costs of the addition of the 9240-8i controller card, but looks like I have to.

  Thanks in advance.

  You're limited with the integrated controller and will need to buy the 9240-8i for several berries.

• build an array with 2 values assigned to 1 dimension

  I am wanting to build a 1 d array where the two values are assigned to each dimension.  For example:

  Index 0 would have a 1 and 4 are attributed to him

  Index of 1 would have a 2 and 3 which are entrusted

  Index 2 could make a 0 and 1 that are entrusted to him.

  So can I unbundle the arrayand grab the two les deux valeurs values of index 0, index 1, etc...  I want to put this inside a control of the typedef table.  Is this possible?

  What is the meaning of the index 0 vs 1 against 2?  What is the significance of 1 and 4 for index 0?  2 and 3 for 1 index? ....

  It could certainly be a 2D array.  The line index would be the equivalent of your current 0, 1, 2 indices.  The column index would be the equivalent of the if you want 1 or 4 or 2 vs 3.

  That's all just a matter of how you want to extract data out of the data structure and pass it to your other duties, such as Fieldpoint DAQmx, a façade, a text file...  If it is a 2D array, you can use the index picture, to get a line, column, or a specific line and column item.  If this is a cluster, you can use the index table to get your line, unbundling for the first or the second product off the part of the cluster.

  What data structure is the best one to use really depends on what you're trying to do with the data.  You want two numbers?  Do you want a number and a Boolean value?  You will need to figure out which is best for your application.

• How can I build an array based on the check boxes "checked"?

  OOP! Just realize that this is in the wrong forum. Sorry
  
  Hey all the... I just have a question on forms in FLEX 2:
  
  I have a Repeater that is populated by a list of musicians from a XML file. Each artist is represented by a box and when the user clicks a "submit" button, I want to than this table to be sent to a php script.
  
  It's the vbox containing the details of the artist and the checkbox:
  
  
  < mx:VBox >
  < mx:Text text = "{artistRepeat.currentItem.name}" / > "
  < source = mx:Image
  scaleContent "{artistRepeat.currentItem.image}" = "true" / >
  
  
  
  "< mx:CheckBox data =" {artistRepeat.currentItem.name} "id ="cBox"click =" modifyArray (Object) "/ >
  < mx:Text text = "{cBox.data}" / > "
  
  < / mx:VBox >
  
  
  And the management is:
  
  
  
  public void modifyArray(item:Object):String {}
  If (cBox.data! = null) {}
  Return artistlist.text;
  
  }
  return artistlist.text = "(artiste =" + cBox.data+ "cBox.data+") "; » ;
  
  
  }
  
  
  He registered the artist as "undefined". I'll the sense here?
  
  Thank you
  Tom

  EDIT: Never mind. I got it with this program. We finished.

  This is a user friendly like a speed bump hoof. Honestly, I will never use once I have the degree, unless Adobe stop using the Russians to write their error messages and a decent site somewhere be configured.

  I'm sorry, I feel pretty bad so that a program has almost caused several heart attacks. It is not good for my health this building :-)

  Anyway thanks,
  Tom

• Connecting leads to build the array in a VI script

  Hello

  I'm looking for a way to connect the wires to a knot of "generation table" in a script of VI.

  I have a table of entries that should translate in a table via node 'building the table '. I added successfully to the input terminals for 'building the table' node in a script of VI. However, the program fails when I try to execute a loop to wire all of the entries in the order. The problem is, all the sons of entry to the first element of the' generation '. Snapshot of the code is attached.

  Please suggest me a way to link the different elements at different entrances to the node 'building the table '.

  Thank you.

  Concerning

  HB

  LV12 running at the moment, the fastest to write a small example that so open LV14 and watch your VI.

  

• Write several bays in one xml file at different times without overwriting the old file?

  Hi my name is Dustin,

  I am new to labview and teststand... I try several tables of data in a single XML right. I can do this with a cluster but I need to create a variable for each of these pictures (21 pictures) and I was hoping to use the same variable for each table. Which means that I get my data table write in an xml file and replace this table in this variable with a new table and then call my VI who writes this table in an xml file and write to the same file xml under the first table without crushing. My VI I created to write a table to an xml file is attached. Yet once I wonder if there is a way to write several berries in a single at different times xml file, without overwriting the old file xml.

  Thank you

  Hi dlovell,

  See the attached example. I think he can help you.

  Kind regards
  Nitz

  (Bravo to give good answers, mark it as a Solution If your problem is resolved)

• Get the table to an XML file with several bays

  Hello

  So I was faced with this program I have for the past few months but I'm almost there. I have a program that creates several berries and place one after the other in an xml file, and each table has its unique name. Now, I would create a VI that takes this XML file and when the user enters the name of the table specific they are seeking it goes into the xml file concludes the table in its entirety under this name and displays in an indicator of output to be read on the VI. A sample of my xml file and the VI that creates this xml file is attached.

  Thank you

  dlovell

  Something like this should work for you.

  

• The highest element of several bays

  I have four tables 1 d (each approximately 80 long items) stored in locations slightly different in a cluster of 'Super' (the most relevant levels can be seen in the image below). I need to find the value of the highest element in these paintings. I came with two methods, but it's getting late in the day and they all seem sadly convoluted. What is the best/better way to do this? In a similar example, I also find the item lowest of four different pictures.

  

  Use the function Array Max & Min

  Ben64

• Delete several bays

  I'm reading a text file. I have a simple question. I need to remove two rows in a table. I want to use the function remove the table. But I read that I can wire index only one entry. I have a total of 8 rows. I want to remove the first two lines of the table.

  Cited the help of LabVIEW, "you can delete several consecutive subdashboards both by the lengthof wire."

  Exactly how?

  Thanks in advance.