Build in... on... in textual information

Similar Questions

• Failure to build LabVIEW application on Linux using "Shared library".

  In order to create a LabVIEW application on linux without X display, I have respected the LabVIEW VI using the shared library for Linux. I did it by clicking with the right button on construction Specifications and selecting New > Shared Library, and in the section Advanced , check the box labeled embedded version using the runtime engine. At the end of the build process, a message to inform that the build failed with the following message:

  "Error 127 to the Exec System: sh: gcc: command not found".

  The error code is not set. No one has provided a description for this code, or you could have wired a number which is not an admission of error code error code. »

  I have had no compling the LabVIEW VI in normal mode, so am confused about which is the problem.

  Hi Julian,.

  GCC is a compiler C and C++ under Linux.  A simple way to check if it is installed is to open a terminal and type 'gcc', if the command is recognized then the package is already installed, and the problem must lie elsewhere.  If this slot of Linux has a package manager, then it must be posted in here also.  If not then it could point to him being not installed or missing a dependency makes not accessible from the command line.  Here is a link that should hopefully scroll you through installation of gcc with Redhat: http://www.cyberciti.biz/faq/centos-linux-install-gcc-c-c-compiler/ .

• Error when trying to renew the certificate created by Adobe Reader

  A digital signature (certificate of basic Windows) was of has now expired. It has been used successfully for several years.

  The user can no longer use this signature to sign Digital Signature on Documents Adobe PDF fields.

  It is the first time that we are trying to renew this certificate. Before, we used to create a new certificate.

  When trying to renew the certificate using the Certificate MMC snap-in (Certificate Manager), we get the following error:

  "request contains no certificate template information.

  

  

  

  Any help to activate the use of the Digital Signature certificate renewal will be greatly appreciated?

  Tarek

  Hi Tarek,

  There are a number of things at play here. First to the top, we will place terminology. What you ask the subject isn't a digital signature, but rather a digital ID. Think of this as similar to the world where the digital ID is equivalent to a pen and paper is used to create the digital signature, just like the feather is used to create the wet ink signature.

  What you need to do is called a key roll on, where you give up the public key to prolong his life. The big question is how can you resign from the public key, and the answer is that you need the original certificate signature request (CSR in geek speak). Of course you don't have the CSR because you don't get one when you use Acrobat/Reader to generate a self-signed digital ID. Probably, this raises the question, what is a self-signed digital ID? A start of the process of generation and build a digital ID initially generate you the key private and public key. However, there is a bit of textual information that is also packed with the public key, such as your name, address (postal or e-mail). The public key and text information is packaged in the CSR, so you have the private key and CSR sitting there separately. The next step is to send the CSR to the issuer and to sign with his private key. At this point the issuer name, validity period, serial number and other information are package upward in the public key certificate file, which, incidentally, also contains the signature itself. Now you've got a signed with the corresponding private key, public key certificate sitting on your computer. If you take the two pieces and combine in a single file, you end up with a digital ID.

  The thing is, when Acrobat/Reader generates a digital ID, it uses the private key to sign the CSR, so the digital ID that has ensued is known as "Self-signed" in the part of the public key of the file certificate has been signed by its own private key rather than be signed by a CA issuing. CSR is removed during this operation and you done with just a digital ID in self with a life expectancy of 5 years. The whole process is made as simple as possible for the end user, this is why there is no CSR that flying over so that they treat.

  All that being said, your only option is to use Acrobat or Reader to create a new self-signed digital ID and start using that replaces the expired. You try to use Microsoft CAPI (Cryptographic Application Program Interface) to send the CSR to a CA to have them sign the CSR and return a signed public key certificate file, but I'm sure you guessed now, you do not the CSR to be sent, so MS-CAPI returns the error message you posted in red font. He can't really say that, but that's what it means.

  I hope this helps.

  Steve

• Why don't the addition of metadata to be added manually in the iTunes library song change metadata in Windows Explorer and anywhere else?

  Adding metadata to a song in the iTunes library has no effect anywhere else (as in Windows Explorer or the Groove music).

  I would like to know if I have disabled this in error or if it is not guaranteed to all visitors.

  Where it is not provided to customers, I would like to know how iTunes stores this metadata and whether it can be automatically sent to the library of Windows.

  Thank you.

  A reason of changes committed to iTunes cannot be is covered in the tip of the user, fix the iTunes for Windows security permissions but iTunes usually returns to the original data if you probably don't see this particular problem. The other possibility is of several tags.

  Several tags (Mp3 files only)

  The ID3 specification allows files to have several tags in different versions and languages, but iTunes does not work properly with simple tags. When multiple tags are present it can sometimes do not apply updates to the tag that reads back (probably update one of the others in the file) and it is also possible that the iPod and iTunes may have different rules for the tag that they give priority to. This could lead to situations where everything is properly organized in iTunes, but then inexplicably collapses on an iPod, or tracks that display different information in Windows Explorer or another media player. There are tags 3rd party editors that allow to manipulate several tags, but I don't have a casual recommendation. A workaround in iTunes is to use the context menu convert the ID3 Tags... > None a few times to remove all the labels, then convert ID3 Tags... > v2.3 to build a cool tag with information still held in the iTunes database. I've read in the past that iTunes is not completely compatible with the specification v2.4, although this may be the case, support is more however for v2.3 is widespread, then I would say using v2.3 to v2.4. All embedded work will be deleted so it must be replaced if wanted. For Windows users running a script named CreateFolderArt before and after the cleaning process tag should handle this.

  Note that some data, for example the sides and the counties of game, is only stored in the database internal iTunes and not surrounded by tags.

  TT2

• Edition of the details on songs in iTunes does not appear on the Windows song

  Here, I'm just change in some missing details on songs I have on iTunes, as fill for composers, missing the album artists, genre, etc... However, when I close iTunes and look at the details of the song in my folder on Windows 10, details I have briefed on iTunes isn't there, so it is always white.

  When I opened iTunes again, details, which I have added to these songs are still showed it. I tried to delete the songs in the iTunes list and still adding them and I always see these details, but I still don't see anything on the file when he looks in the Windows folder.

  I opened the song on Windows Media Player and Microsoft Groove, and the details are not there. How can I fix? I want to add these songs on my Android phone as well, but it includes also the fixed details, I put in the songs on iTunes.

  Several tags (Mp3 files only)

  The ID3 specification allows files to have several tags in different versions and languages, but iTunes does not work properly with simple tags. When multiple tags are present it can sometimes do not apply updates to the tag that reads back (probably update one of the others in the file) and it is also possible that the iPod and iTunes may have different rules for the tag that they give priority to. This could lead to situations where everything is properly organized in iTunes, but then inexplicably collapses on an iPod, or tracks that display different information in Windows Explorer or another media player. There are tags 3rd party editors that allow to manipulate several tags, but I don't have a casual recommendation. A workaround in iTunes is to use the context menu convert the ID3 Tags... > None a few times to remove all the labels, then convert ID3 Tags... > v2.3 to build a cool tag with information still held in the iTunes database. I've read in the past that iTunes is not completely compatible with the specification v2.4, although this may be the case, support is more however for v2.3 is widespread, then I would say using v2.3 to v2.4. All embedded work will be deleted so it must be replaced if wanted. For Windows users running a script named CreateFolderArt before and after the cleaning process tag should handle this.

  TT2

• Beta version update channel not updated automatically

  I have the default Google search homepage.
  For the 3 latest updates, I see that your Firefox Beta is updated on the home page.
  I just downloaded and installed 12.0b2. I have Options/Options advances/updated to update - auto on.
  Help on the shows, I'm on Firefox Beta 12. (note, not 12.0b2)

  Beta versions are supposed to behave like the regular versions to check website (browser detection) problems and do not have additional data added to the user agent.
  
  You can either consult the date of build to help > troubleshooting page information or access link on the subject building: buildconfig page or check the update history (Options > advanced > update)

  Aurora and night work differently and also indicate the date of construction in the version of Gecko to facilitate, in bug reports.

  • Mozilla/5.0 (Windows NT 5.1; rv:14.0) Gecko/20120331 Firefox/14.0a1
  • Mozilla/5.0 (Windows NT 5.1; rv:13.0) Gecko/20120331 Firefox/13.0a2

• Satallite L50-C-1FR - Question on recovery media

  I recently bought a laptop Satallite L50-C-1FR. I deleted and added many applications. I used the Recovery Media Creator to make recovery DVD. During the process of textual information said that there is a recovery image on the hard drive. This is not specified, it is how to work my three DVD. They are independent from the image on the hard drive? Furthermore, I made these DVD after making a lot of changes for installed applications.

  Is the recovery media I did register these changes?

  When you buy the notebook you will get preinstalled with recovery image (factory settings). This recovery image is also recorded on the HARD drive and when you create recovery discs this image will be copied onto disks.

  Please note: all applications available to you also will not be part of the package.

  One day, when you want to have factory settings again please use the created disks and reinstall the recovery image. Of course, start with number 1 DVD and when necessary (display message) placed second or third DVD in ODD and continue the recovery image installation.

• can not install Skype on ubantu14.04 64-bit

  Hello

  sudo apt-fast install Skype
  
  Work... it may take some time.
  
  E: error, pkgProblemResolver::Resolve generated breaks, this may be caused by packages that took place.
  No files to download.
  
  Reading package lists... Fact
  
  Building dependency tree
  
  Reading state information... Fact
  
  Some packages do not have can be installed. This may mean that you have
  
  requested an impossible situation or if you use the unstable
  
  distribution that some required packages have not yet been created
  
  or been moved out of incoming.
  
  The following information may help to resolve the situation:
  The following packages have unmet dependencies:
  
   Skype: depends: Skype-bin
  
   the unit control center: depends on: libcheese-gtk23 (> = 3.4.0) but it's not going to be installed
  
                          Depends on: libcheese7 (> = 3.0.1) but it's not going to be installed
  
  E: error, pkgProblemResolver::Resolve generated breaks, this may be caused by packages that took place.

  I tried everything, available on the net... don't you dare tell me to run apt - get update or other common commands... I double dare you

  Label "LinuxAlpha" of the wire.

  I also installed Skype alpha on 16.04 without problems. That should be considered a requirement?

• Sorting in Itunes 12 problems

  I have sort within the 12.3.2.35 Itunes 64-bit. Whenever I try to enter an artist in the fields "sort as" for a group of songs under Get Info-> sort, he would return to the "Mixed" value I also disabled the compilation box in the Get Info-> Details tab without success. The album continues to show under "Unknown artist" in my library of music Iphone 6 s. help, please!

  Changes cannot be applied one of the reasons are covered in the thing to fix for iTunes for Windows security permissions. The other is several tags.

  Several tags (Only Mp3 files)

  The ID3 specification allows files to have several tags in different versions and languages, but iTunes does not work properly with simple tags. When multiple tags are present it can sometimes do not apply updates to the tag that reads back (probably update one of the others in the file) and it is also possible that the iPod & iTunes may have different rules for the tag that they give priority to. This could lead to situations where everything is properly organized in iTunes, but then inexplicably collapses on an iPod, or tracks that display different information in Windows Explorer or another media player. There are tags 3rd party editors that allow to manipulate several tags, but I don't have a casual recommendation. A workaround in iTunes is to use the context menu convert the ID3 Tags... > no a few times to remove all the labels, then convert ID3 Tags... > v2.3 to build a cool tag with information still held in the iTunes database. I've read in the past that iTunes is not completely compatible with the specification v2.4, although this may be the case, support is more however for v2.3 is widespread, then I would say using v2.3 to v2.4. All embedded work will be deleted so it must be replaced if wanted. Executes a script named CreateFolderArt before and after the cleaning process tag must handle this.

  It is also worth noting that the Album artist takes precedence over the artist in iTunes and on iOS devices. The two fields must be filled for best results.

  TT2

• void / Panel VI cannot be loaded correctly when main vi is converted to exe

  Hi all, I have a main vi that uses sup Panel to call one another only vi during the operation. The code works well at level vi. However, when I converted the main vi in exe file, this Panel of sup cannot properly load only one vi.

  Manifest error"Application built or Shared Library (DLL): ensure that all loaded screws dynamically were correctly included in the specification for the application or a shared library build.  LabVIEW Real-time: screw built into executables are not accessible via VI Server calls. ' Use the Source Distributions dynamically call screws on real-time targets.

  Here is how it is used in the Panel of sup, could you tell me how I can change the path to the building to do this job in exe file? Thank you very much!

  

  The path-specific problems are usually caused by this: http://digital.ni.com/public.nsf/allkb/FD7DE8BC8FFC256C862565F4006BE363

  With respect to the construction, you must explicitly add dynamic screws to the list of source files. These must be in the list "Still included" in the tab "Source Files". Please see the documentation for the App Builder for details and additional information.

• Accents in project paths is longer supported in 2013 CVI

  Compilation of files with accents anywhere in the full path leads to the error of the compiler Build failed. No additional information. I'm looking forward to the next update...

  Hi ems174,

  We will be fixing this issue in the next update and you can follow up with bug ID 422700.

• get stuck when you try to run an installer built in!

  Hello, all!  I'm new to the forum.  I worked on and off LabVIEW Development.  One of my projects, it must be that I am building a VI to download information from a PLC.  The information is laid out in an excel file, where a macro is ran by program to convert the news for a more user-friendly look and playback.

  This is my first, an installer of construction so I thought to test.  When I packed the VI into an executable and a Setup program, it was all smooth sailing.  However, when I tested the installation program on several computers (with no LV or LV - RTE), few took 5 to 10 minutes to complete the installation.  Others are stuck initially in the installation process... generally when the process is to install 'Microsoft Run Time Engine.  On a computer, the installation process was canceled and restarted several times without success.  Then, the next morning (after a reboot), the installation worked without problem.  On another computer, I did the whole 'install-cancel-restart install' process.  After three times I checked the Manager task and noticed it was also a lot of files msiexec.exe continues even after that facility had been cancelled and the interface of the closed facility.  I ended up all msiexec.exe, ran again the installation process, and it went smoothly from 0 to 100%.

  Although it's great that I had the installer through smoothly after completing the msiexec process, it cannot do as the solution to an installation complete.

  Has anyone ever run into this issue?  Computers, on which I have tested are all connected to the company network, but the files are installed in C:\Program Files.  I'll test the installation on personal laptops and computers to see if it is some kind of security problem Admin/Norton/as our IT has implemented.

  Hi all

  Thanks to those who responded to try and help me.  After a few weeks of investigation, I came to the following conclusion: the LV Installer built is suspended due to the msiexec Windows XP.  I found a few online solutions, one of them involving "restoration" the MSI installer (I don't remember the other...).  Due to the nature of the software that I build, users enter in their records is not a viable option.  Instead, the following roundabout will have to:

  1 Win - XP user installs the software.

  2. If installation of Win - XP user is suspended (see the attached picture where I hung on a PC Win - XP), they will have to open the Task Manager and "complete the process -" all processes msiexec.exe... after a few seconds, the installation prompts the user that a certain file failed to install and ask if they want to continue.  The user will click on continue and repeat if Setup hangs again.  This should be done until the installation is complete (that I had to do this three times repeatedly).  At the end (if I remember correctly), the installation prompts the user that the process has failed.

  At this point, the installation closes. BUT all the necessary files seem to be there.  The software seems to work ok with several test is running - no problem.

  As I am short on time and have to run out of the office... I just remembered that the alternative is to try to install on the administrator account.  Probably, the reason why the installer crashes is because the given user account has permissions to read/write appropriate in C:\Program Files.

  Any thoughts are appreciated.  Thanks LV community - have a good weekend!

• How can I determine microsoft product is associated with a string of product?

  I have a Small Business Server 2003.  I need to know as precisely as possible what version of Small Business SERVER 2003, is to develop a plan of Active Directory migration. We want to migrate the announcement of a new server box running Windows Server 2008 R2 Enterprise.

  Belarc Advisor says it's 'Windows Server 2003 Standard Edition, Small Business Server restricted Service Pack 2 (build 3790)'.  Under license information, it displays the license key and says it's "74995-OEM-4411902-03101"

  Given these clues, can someone tell me what product I. I'd also appreciate comments about the migration strategy.

  Based on the information provided, it could be a Dell SBS R2. However, your question (including migration) is best answered on the Microsoft server forum: http://social.technet.microsoft.com/Forums/en/category/windowsserver/

  J W Stuart: http://www.pagestart.com

• Can what kind of network card I add?

  CTRL + Alt + S gives me this information, but none of this is acknowledged by HP support as a valid system site search. I just want to know what type of expansion of this machine slot has, so I can order a new network card. If someone can tell me how to get either the HP support site search to work, or tell me how to determine the right type of NETWORK card to buy, I would be grateful.

  System information displayed:

  Model #: p6142p
  Product #: NP218AA-ABA
  Serial No.:[personal information deleted]
  Software Build #: 93NAv6PrA2
  Service ID #: [personal information]
  PCBRAND: Pavilion

  Hello

  The following link shows the specifications of your machine:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c01746796&lang=en&cc=us&ContentType=SupportFAQ&prodSeriesId=3942799&prodTypeId=12454

  It has 3 PCIe x 1 and a PCIe x 16 graphics slots. You can buy a PCIe NIC card (called Networ adapter) and add to your machine, something similar to one of the following (for wired network)

  http://www.Amazon.com/Intel-Gigabit-network-adapter-EXPI9301CTBLK/DP/B001CY0P7G

  or the next a wireless network:

  http://www.Amazon.com/PCE-N13-Wireless-N-Network-transmit-interface/DP/B0039GVOAM

  Kind regards.

• Series will not connect unless MAX has started

  Hi all

  I'm using Labview 7.0, MAX 4.6.0f1, NI-VISA 3.0, Windows XP. A Microchip PIC USB device is connected to the computer of Labview, the embedded PIC code registers as a virtual serial port and behaves as expected, I use Labview to read and written simple fames of the text.

  I found, I can connect ok with the device and the need to create a Distributable Application, this is where I found problems. I installed the application on another machine, but I see no series COM x text in the drop-down list serial. I was expecting a similar function to the Device Manager which lists the serial ports on the fly (including the captain that I use)

  After reading a few posts it seems that I need VISA runtime. I thought that I was including this in my application I selected, tools > build application > settings Installer > create X Installer > advanced > Serial Port Support. The only thing that seems to demand to pick up the serial ports should run MAX first. I prefer not to force users (15 to 20) install MAX and then have the Labview to automate a MAX boot when the program is started. This seems a bit awkward.

  Advice appreciated

  Thanks Chris

  Hi Chris,

  My apologies for the delay in my response, I had to reinstall LabVIEW 7.0 on an older machine.

  Tested visa301.exe, including a simple installer using the same procedure as in your "*.bld" file and the same problem where the VISA Installer restarted. To resolve this problem, I had to uncheck the box 'Wait until done' in the 'Advanced Installer settings', allowed the application and driver to install properly.

  I hope this helps with your LabVIEW 7.0 installer build Chris, please keep me informed of your progress.

  Thank you very much