Can what kind of network card I add?

Similar Questions

• Should what kind of memory card I buy for my iMac (mid 2011)?

  I would like to increase the memory on my computer that I fight to run the programs I need on the current 4 GB.  I believe I have four slots in the rear of my machine (I could be wrong), adding memory to, but have no idea what to buy.  I would like to know what kind of memory card should I buy (or how), in the best place to buy.

  Thank you for your comments!

  Data sheet:

  iMac: 27 inches, mid-2011

  Running: OSX version 10.10.5 Yosemite

  Processor: Intel Core i5 at 2.7 GHz

  Memory: 4 GB 1333 MHz DDR3

  Boot disk: Macintosh HD

  Graphics card: AMD Radeon HD 6770 M 512 MB

  This should help you understand what you need...

  http://www.EveryMac.com/systems/Apple/iMac/iMac-aluminum-FAQ/iMac-Intel-aluminum-21.5-inch-27-inch-how-to-upgrade-memory...

  OWC is a good source for memory and thus help.

• How can you tell what your vSwitch NETWORK card uses?

  We are still at the experimental stage with our ESXi 4.1 installation and have 4 cards assigned to a vSwitch network. 3 are active and it is defined as the day before. Is there a way to tell which network cards are actually get used or are all 3 active cards get used both for the collection of NETWORK adapters? I have attached a few screenshots to view our installation.

  Another thing is that the day before, we noticed NIC for network management and VMnetwork are different and which seemed to have been changed on their own. Is this normal? For example the day before NIC for network management is set to vmnic3 and the NIC for the VMnetwork has the value vmnic2

  Well they are all 'used' to my knowledge.  The only way I've really seen to see one that is circulating is to make a display of advanced host performance and look at networking. From there on, it lists each nic and the amount of data it is to push through. I know that we have 4 s NIC team (similar to your Setup less standby configuration) and usually only a NETWORK card pushes the data at once.

• PC laptop Pavilion 17: what is the NETWORK card in the Pavilion 17?

  This machine is my daughter-in-law. She had a HD crash & replaced the HD. She bought Win 7 Pro 64 bits/load

  on the new HD. I got all operational except for the network card.  I need to load the drivers for the NETWORK card, but I can't find any explanation as to what is the make and model in this machine.  News machine below:

  Model 17-e049WM

  Product E0J75UA #ABA

  SER # 5CD3201PVG

  SYS COUNCIL 1984

  Looks like it's realtek, both wireless and NIC manufacturer. Although the model of the NETWORK adapter is not available, you can download these drivers from here

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&PFID=4&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  or here at HP.

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63396.exe

• Can what kind of mouse I use with my Macbook Pro?

  I intend to buy a mouse for my Macbook Pro 13 "retina. Do I have that right to say that a powered bluetooth mouse can be used with my macbook? In addition, what other mouse types can I use with my macbook?

  Kind regards

  Rayan

  Pretty much any USB or BT mouse, trackball or trackpad should work just fine.

• What kind of main card has Satellite P30?

  Can someone tell me who 'brand' the main Board is my p30-109, P4 3.06 GHz, 60GB HD. Is a main Intel card?

  Kind regards
  LEF

  Hello

  Need a motherboard of Toshiba.
  I found some motherboards for Satellite P30.
  Maybe it will help for other investigations.

  http://www.sparepartswarehouse.com/DeviceType-vendor-modelline-modelseries-partList.aspx?DeviceType=0&vendorlevel=ModelSeries & modelseriescatid = 162956 & partcatid = 140747 & filte r = 0

• How can failed Realtek RTL8139 network card I download another

  my card network Realtek RTL8139 failed, how can I download another

  I just downloaded from the HP website and let my comp. do it for me.    Works very well.

• Can what type of video card I buy to upgrade a Pavilion a1000y? What are the specs?

  I upgraded my desktop HP Pavilion to Win7 a1000y and the default value of the monitor is VGA. the resolution is not good for the big screen that I use. I'll try to find the PCI slot specifications and/or specifications of a video card, that I can add to the upgrade of the video to the monitor and does not get distorted image.

  I didn't Eve whether this model can use a video card, since he already come with video included in the motherboard, if that makes sense.

  Thanks in advance for your help

  See you soon

  AB

  The motherboard of your PC has PCI slots. This means that you will need a PCI video card and not the generation of current PCI Express x 16 video cards.

  This webage Newegg shows the type of card you need. I recommend that you do not have a card with more than 512 MB RAM video.

• Determine what is my network card and what my sound card.

  I have a dell Inspiron mini 10

  I have a dell 1510 wireless-n wlan mini card I think its made by Broadcom Version 5.10.38.26 or is it my sound card which miss me to perhaps my ethernet card is by realtek 8102E/RTL RTL 8103E family PCI-E FAST ETHERNET NIC Driver Version 5.714.122.2009 which is what ethernet card or sound card thank Don and I think am under System 32

  Hi Donf1957,

  I suggest you to contact Dell technical support because they can tell you exactly what is there by reading off the coast of the service tag.

  http://support.Dell.com/

• Where can I buy a network card wireless minPCI for a Satellite Pro A30 PSA35E

  Hello

  Anyone know where I can buy a card pci WLAN for a Satellite pro A30 PSA35E laptop?
  I live in England.

  See you soon

  The laptop would support this Kit wireless LAN card: PA3212U-1MPC
  It s an Intel Pro 2100 WLan card and it supports the 802. 11b standard.

• Satellite 3000 x 11 can't use its network card

  My friend 3000 satellite x 11 I am trying to configure it to connect to my uni internet rooms, but for that I need the MAC address. If I do ipconfig it just says: 'Windows IP configuration' and nothing else.

  If I go to Device Manager there is no category for network adapters, even though I see the ethernet to the rear port. Its almost as if he knows not it's on-board LAN.

  Back to home his brother to use it with the built-in modem, but not the ethernet port.

  Any ideas?

  Hello

  Some Toshiba models don't have a RJ45 (Ethernet) port but nothing behind it--means no network controller. The machine is ready for LAN but no LAN built in.

  Therefore get f.ex. a PC card to connect to the LAN.

  BR

  Tom

• Network connects via radio instead of via the network cable. How can I configure the network card as the default network connection?

  Network wireless adapter NIC Ethernet network device

  I've updated from Windows XP to Windows 7 recently. My internet connection used to be connected directly to my computer and I have a wireless router for other users in the House. Since getting 7, my computer (while still having the direct connection) should automatically connect via the wireless. If I disable the feature wireless to the computer I lose access to the internet completely. Is there anyway that I can get it back to the way it was without going back to XP? I know it's probably something really simple to fix, but I just can't understand it. Thanks for any help you can give!

  Hello

  I recommend you to follow the steps suggested in this article and check if it helps.

  I can't connect to the Internet via wired broadband digital subscriber line (LAN) or cable.

• not supported for ESXi 4 NIC... Can I simply add a NETWORK card?

  Maybe it's painfully obvious, but I don't want to assume anything.  I tried to install ESXi 4u1 this morning on a machine just to see if it would work, and I have not reported any supported network cards.  Can I buy a NETWORK card support and then ESXi 4 will work?  Is it really as simple as that, or is there some other stuff that I'm not aware of?

  Scott

  Hope yo don't mind to mark this as an answer...

  vcbMC - 1.0.6 Beta

  Lite vcbMC - 1.0.7

  http://www.no-x.org

• Pavillionp 6601f: can I put on my windows desktop computer wireless network card 7 HP p6601f

  Can I put the network card wireless on my HP model of office p6610f on windows 7 64 bit to get the best wireless connection?

  VJP2002, welcome to the forum.

  According to the Product Specifications for the computer, it came not with a wireless card installed.  However, you can add a.  Here is a card that should work for you.  It uses the technology of KT (Gigabit).  This means that your router must support AC.  However, it supports 802.11 a/b/g/n.  There are 3 PCI Express x 1 slots on the motherboard.

  There are other options, for example, wireless USB adapters.  You don't have to open the case and install them.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Adding a second NETWORK card on the server HP Proliant ML 350 G5

  I have a new HP Proliant with a guest of Windows 2008.  HP came with two network cards on the MB.  I need double-home this box on both networks, at least for a while, and this server will be the only road between subnets.  It's just a stand-alone installation inset.

  I looked in the settings of the BIOS on the HP and it's a little confusing, but I'm sure that the second network card is active (it lights up when it is plugged).  When I try to add a NETWORK adapter to the configuration of the host, it is as if the second NETWORK card is not present.

  My question is what is the best way to add this second NETWORK adapter and how do I do that?

  I'll need access to the host of the VI Client on both networks - at least for a while.

  Any help would be greatly appreciated.

  If you go to configuration-card network in the vSphere client is the 2nd NETWORK card that there are listed?  If ESXi is able to recognize the NETWORK adapter (or other people that you add) they should appear in this list without any config changes and be ready for use.

  What kind of networks are you fill?   If one is considered not secure you could be better not add a management on this network port and prefer to have access via a VPN VM or a secure hosted VM / dual.

  Dave

  VMware communities user moderator

  Now available - vSphere Quick Start Guide

  You have a system or a PCI with VMDirectPath?  Submit your specifications to Officieux VMDirectPath HCL.