Built in DVD will not play, white screen

Hello
You just bought the built-in DVD player 24D1434DB. Its in a bedroom and not connected to the TV yet but wanted to watch DVD. No photo of TV or DVD. The standby button turns green when you press on the remote control, but not picture. Ive put a new DVD in which he agrees and looks like its reading but not picture!

Help, please?

Thank you

Hello

I have not this TV, but I hope that you have paper manuals s user then please visit page 37 where you can read how to use internal DVD drive and choose between the TV and DVD with the "SOURCE" button mode.

But there is another thing that confuses me:
> Her in a bedroom and not connected to the TV yet but wanted to watch DVD.
My English isn't the best but I do not understand what you mean with not connected to the TV?

Tags: Toshiba

Similar Questions

  • Why some DVDs will not play in my computer DVD player?

    I have a small collection of commercial DVD movies.  Most of them come from the place of the U.S. market, and some come from Asia... He play ALL these DVD in my Phillips DVD player that is connected to my TV.

    But only some of these DVD will play in my DVD player which is in my computer Dell Inspiron 531 with Windows 7 Ultimate edition.  This computer has a DVD/CD SAMSUNG HD161HJ SCSI disk drive.

    Some of the DVDs that will play on my computer are the American market, and some of them are of the Asian market, so I don't think that this has nothing to do with why some of these DVDs will not play on my computer.

    DVDs that play fine in my Phillips DVD on my TV player that will not play on my computer don't yet seem to close at play on my computer.  The DVD that will play on my computer liquidation (you can hear the noise) in the DVD player in 20 seconds and they start playing automatically in Windows Media Player... but I welcomed all others who won't have to sit in the DVD player for several minutes each in my tests and nothing happens... There is no wind sound and all nothing is happening on the computer screen.

    This doesn't seem to be a problem with the driver software for the disk hard because some of the DVDs will play.

    None of these DVDs are buckled and all of them are clean.

    I tried two or three times test each of DVDs that won't play, the removed from drive and put them back in.

    Does anyone have any suggestions?

    Thank you

    NuMetro

    Hi Dale,

    Although I never had no problem with the DVD or the CD I burned on PC, I think you're going to probably the same thing, that I've been with this internal DVD/CD player, is not a software problem, but just the characteristics of a lower quality DVD/CD player, and it isn't necessarily the symptoms of a dying man in car , but just a stock car low quality that some computer manufacturers cut corners with.
    The drive in the computer that I was referring in this thread is a DVD/CD SAMSUNG HD161HJ SCSI disk drive. Which may or may not be identical or similar to the reader, you have problems with, but the computer on which the reader is underway is a Dell Inspiron 531.
    Through the information that I've gathered on this thread and on another forum, I came to the conclusion that it's just a cheap player who gives intermittent performance recognizing various DVD, but as I said, the drive I troubleshooting always recognize DVDs and CDs that I burned in it... It was just the DVD movie that I have problems with.
    I dug my loyal reader DVD LaCie and plugged and I had no problems with him acknowledging and play ONE of my DVDs on this machine, which proves that the problem has nothing to do with the software system or DVD player software, as in the case suggested by someone else on this thread.
    Just buy yourself a Firewire drive or USB-2 DVD decent and you're probably fine.
    NuMetro
  • DVD will not play on the standalone DVD player

    DVD NOT PLAYON STAND ALONE DVD PLAYER

    HELLO, I JUST USED WINDOW MAKER DVD, MY COMPUTER IS ONLY TWO MONTHS OLD.

    THE DVD WILL NOT PLAY ON MY DVD PLAYER WHICH IS PUGGED IN MY TV. HE PLAYS ON THE COMPUTER AND TELEVISION WHICH HAS A DVD BUILT IN IT.

    Thank you

    HELLO, I JUST USED WINDOW MAKER DVD, MY COMPUTER IS ONLY TWO MONTHS OLD.

    THE DVD WILL NOT PLAY ON MY DVD PLAYER WHICH IS PUGGED IN MY TV. HE PLAYS ON THE COMPUTER AND TELEVISION WHICH HAS A DVD BUILT IN IT.

    Thank you

    ==================================================
    If you use a DVD - RW disk... you could try a DVD-R, but some DVD players
    will not play a home made DVD... not much you can do about it.

    As an experience... you could try the following freeware to burn a video DVD
    recorded with your file to .wmv Movie Maker.

    (FWIW) It's always a good idea to create a system
    Restore point before installing software or updates)

    DVD Flick
    http://sourceforge.NET/projects/dvdflick/

    Tutorial DVD Flick
    http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

    Burn any Format video DVD PC
    http://www.freevideoworkshop.com/dvdflicktutorial.htm

    Good luck...

    Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • Pavilion Desktop PC p7-1414: DVD will not play video

    All of a sudden my DVD will not play on my computer.  DVD will play the data but not video.  Check Device Manager, which States that the device is functioning properly.  Insert other discs that have always played, but now they are not. Videos will play, however, on television.  No new hardware installed to cause a conflict. Checking for updates for the driver, but there are no new updates/drivers to install.

    Success... Thanks a lot for the downloads.  I currently have 8 CyberlinkPower2Go for burning, but the best new version I guess.  Maybe he would correct music hushed on broadcast television.  Thanks again... you saved a LOT of frustration!

  • I get the message, "DLL could not be opened", and now my DVD will not play on my HP laptop

    I get the message, "DLL could not be opened", and now my DVD will not play on my HP laptop

    I get the message, "DLL could not be opened", and now my DVD will not play on my HP laptop

    =================================
    If it is a recent issue, of what it may be worth trying
    do a restore of the system at a time before everything started.

    See the following article:

    (306084) how to restore Windows XP to a
    previous state
    http://support.Microsoft.com/?kbid=306084

  • I recently installed a DVD from ASUS drive, my DVD will not play on Windows media player plug-in but I bought the Corel DVD freeze and will not play.

    Windows XP DVD with Windows Media Player problem

    I have a Dell dimension3000 running Windows XP. I have an upgrade video card NVIDIA 8400 GS with memorey upgrade 2 g. I recently installed a DVD from ASUS drive, my DVD will not play on Windows media player plug-in but I bought the Corel DVD freeze and will not play. Is there a better plug-in or a solution to this problem?

    Try to download the utility "Windows XP video decoder check utility.

    It checks the ability of DVD to WMP encoder

  • Envy23: CD and DVD will not play

    My CD/DVD will not play.

    CyberLink recognizes the drive, but displays the error message "No disk in drive" when inserted an ois.

    similar to windows media player. Have updated the BIOS but no luck have updated from Cyberlink. Can you please help. Very annoying.

    Hello @Brutus2 and @2edo,.

    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

    I read your posts about how you're not able to get your computers to play the CD or the DVD into the optical drive, and I'd be happy to help you in this case!

    To fix this, I advise you to follow the steps described in this document on disk impossible reading disks (Windows 8). This will help you enable your computer to read and play CD and DVD media on the optical drive.

    Please re-post with the results of your troubleshooting, and I look forward to your response!

    Concerning

  • Some DVDs will not play on my laptop satellite

    I was redirected here from this forum: http://forums.toshiba.com/t5/Drivers-and-Utilities/tsstcorp-cddvdw-su-208bb-failing-to-recognize-dvd/td-p/463603

    I can't read some DVD (which will play on other computers) but some DVD will not work.

    As per link above the pilot is tsstcorp cddvdw su-208bb. Tried uninstalling the drive and reboot but no effect.
    I don't know my exact model. It's just a Satellite, and this is the only information I can find.

    It is not easy to say what may be wrong with that. Try to clean the lens and check it once more.

  • House DVD will not play

    I made a DVD on a DVD recorder.  He plays very well on this DVD player and other DVD player.  However, it will not play on my PC (which is P6210 with Windows 7).

    Explorer Windows actually said the DVD is blank (zero points).

    Any ideas?  The DVD player manual says something "codec", but can't find anything about it on the HP support site.

    Big_Dave,

    Your right to the mark. Step 9 to explain it. Even with my JVC deck, you have to Finalize the media.

  • Pavilion 17-e013nr: dvd will not play some formats that played before, does not recognize the format of bup.

    Computer will not play a dvd it has played previously. The dvd is in a bup format. I cleaned up some new downloads out of my computer and am thinkgin can I have deleted the program for my dvd media.

    Hello

    I think he must have other formats too, not only BUP. Please try the video player next, he'll play almost all video formats.

    http://www.videolan.org/VLC/download-Windows.html

    Kind regards.

  • DVD will not play in my Windows Media Player.

    My windows media player will not play the dvd. I get the message ' is Impossible to access the file, the file may be in use you will no longer have access to the computer on which the file is stored, or your proxy settings are may not be incorrect. "

    My windows media player will not play the dvd. I get the message ' is Impossible to access the file, the file may be in use you will no longer have access to the computer on which the file is stored, or your proxy settings are may not be incorrect. "

    ==========================
    Maybe you need a DVD decoder:

    Info about DVD decoders:
    Plug-ins for Windows Media Player
    http://www.Microsoft.com/windows/windowsmedia/player/plugins.aspx

    Or... you'll love the free VLC Media Player:

    VLC Media Player
    http://www.videolan.org/

    And it may be worth trying to install a codec pack:

    * Proceed at your own risk *.

    CCCP (combined Community Codec Pack)
    http://www.CCCP-project.NET/wiki/index.php?title=Main_Page
    (FWIW... it is always preferable, if you create a system restore
    point before installing any software or updates)

    Good luck. John Inzer - MS - MVP - digital media experience

  • DVD will not play on the computer.

    my computer crashed.  The computer files were all saved, but I can't find any programs.  For example, I can no longer play a dvd.  I have Windows Media Player, but it won't play the dvd from the library movie.  Also, when I go to computer/CDrom, the CDrom is empty.

    Thank you for your help.

    If it's a cd rom it will not play a dvd disc. Have you ever read a dvd on it? Is that what you did re - install Windows following the accident?

  • Burned DVD will not play on a DVD player

    I downloaded a 22 minute video I want to burn to a DVD in my DVD player.  I tried on the DVD-R and DVD + R.  They burn the disk but will not play on the DVD player.  The error message indicates that the reading is not available on this disc.  I used the windows search support to problem solve on my own, but have had no success.  I made sure that I am selecting the option of CD/DVD drive to use the ISO image format.  I entered my option and I have no filters.  I have the video on NTSC format since I'm Pennsylvania / U.S..  I have not tried burning on slow or average speed because it burns the DVD without problem it just will not playback on the DVD player.  What do you recommend as my next plan of action for troubleshooting.

    I guess that the video is not DVD compatible Mpeg2.  According to the DVD player, some will play other formats, too.  If there is no program for video on the computer, try Windows Movie Maker (free) to see if the video will too be converted to standard DVD Mpeg2.

  • DVD & will not play... or power dvd or windows media player will play them...

    PUT THE DVD IN THE CAR DOES NOT START DEFAULT PLAYER "POWER DVD... REINSTALLING "POWERDVD" USING THE DISC DID NOT WORK... WHEN WINDOWS MEDIA PLAYER IS IMPLEMENTED AND 'NOW PLAYING' HIT... WILL NOT PLAY.  USING THE WINDOWS MEDIA VERSION 10 PLAYER... SYSTEM SAYS "INSERT DISC" IN THE DRIVE E... MEDIA PLAYER WILL PLAY LIBRARY STUFF. ALSO EVEN FOR CDS.

    CDS PLAY WITH MEDIA PLAYER... I FORGOT TO REMOVE THE DVD FROM THE DRIVE... OOPS

    Hello

    1. what exactly happens when you try to install POWERDVD?
    2. what version of Power DVD software do you use?
    3. do you have Power DVD option on the window of Autorun?
    4. are you able to play the content of the DVD if the windows Explorer?
    5. What is the format of the video?

    Please answer these questions and provide more information clearly on the issue. This will help us assist you better.

    Windows vista has windows MediaPlayer 11 integrated. You must use the windows media player 11.

    To determine the version of Windows Media Player, click onwords in the menuhelp in Windows Media Player and note the version number below the copyright notice. If the menuhelp does not appear, open windows media player, press ALT + H and then click on towords.

    Also, please take a look at the below items that could you.

    http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

    http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

    How to ask a question
    http://support.Microsoft.com/kb/555375

    Thanks and greetings
    Umesh P - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  • Dell Inspirson 546 s burned DVD will not play, error 'error code 740 failure of process of creation ".

    code 740 burn movie but will not play on player please help

    I have a Dell Inspirson 546 s I burned movies much but for a reason, it will still burn, but will not play on a standalone dvd player but I'm working on my computer please help me. For I have not understand the computer. When it's getting burn the creation of said process has no error 740 code.

    You are posting in the wrong Forums.

    For any question on Windows 7:

    http://social.answers.Microsoft.com/forums/en-us/category/Windows7

    Link above is Windows 7 Forum for questions on Windows 7.

    Windows 7 questions should be directed to / stationed there.

    You are in the Vista Forums.

    See you soon.

    Mick Murphy - Microsoft partner

Maybe you are looking for