The print carriage moves do not

Similar Questions

• The Print Spooler Service is not running. Operating system is Windows XP Service Pack 3.

  I followed the suggestion to use start > Control Panel > administration tool > services > print spooler > properties.

  System in automatic mode but State of the said service stopped.

  I get error 1075: the dependency service does not exist or has been marked for deletion.

  Printer worked this AM, but stopped working between two print jobs.

  I used Mr. Fixit to diagnose and fix the problem. Mr. Fixit indicates the print spooler service is not running, but cannot fix it.

  Is there a source code for Windows XP service pack 3 which can be downloaded to replace the corrupted code?

  Thanks for your help

  Robear:

  I'll be back of the travel.  I'm after the suggestion of CARI.  Seems to be the right track.

  My print spooler system component is missing from the remote procedure call.  If I restore it, I think that the print spooler is reactive.  Suggestions of curry hit Start, Program Files, accessories and they type net start spooler.  However, after the departure, I don't see any Program Files, so am unable to complete the suggested path.

• Cocomputer cannot find the printer and I do not have a disk for it

  Original title: printer SUPPORT

  my computer cannot find the printer and I do not have a disk for it

  Then, download and install the appropriate drivers on the printer manufacturer's support web site.

• "Printer properties cannot be displayed. The print spooler service is not running. "(even when it works)

  When I click with the right button on a particular printer and try to view the properties of it, I get the following message:

  Printer properties cannot be displayed.  The print spooler service is not running

  It is, it is run as go to-> Services administrative tools in the Control Panel checks.

  One of the 'printers', I installed is "send to OneNote 2007".  I can click right on this very well - just not this another printer. I'd be able to do if the print spooler is not running?

  Indeed, if I turn off the print spooler, * all * printer in "Printers and faxes" disappear.  So the fact that I'm still see them first place suggests to me that the printer spooler is running.

  I posted this on Microsoft.public.windowsxp.general a while ago and someone suggested that I visit this site .  Problem is C:\WINDOWS\system32\spool\PRINTERS is empty.  It is empty when the print spooler is running and it is empty when it is not.

  Also, I was unable to install KB896423 since I am running SP3.  Try to install he did the following:

  Setup has detected that the version of Service Pack for this system is newer than the update you are applying.

  There is no need to install this update.

  The printer is a "local printer attached to this computer" connected via a "Standard TCP/IP Port".  Personally, I think such a printer should be called "a network printer or a printer attached to another computer", but that is the terminology used by the "Add Printer Wizard".

  Hello terrafrost,.

  Thank you for visiting the Microsoft answers community.

  What is the model number of the printer that you are using?

  Printing a "Standard TCP/IP Port, is used for a printer that is directly connected to a network, not on your local system.

  I would try to uninstall your printer and reinstall your printer.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Operation could not be performed. The print spooler service is not running

  I get the error message "operation could not be performed. The print spooler service is not running. "How to start the service on Windows xp print spooler?

  Click Start--->run---> Type ' services.msc"--->OK and scroll down to print spooler entry and right-click, select Properties, set Startup type and in"service status", click the button to start the service."

  Good luck.

• The print spooler service is not running

  I had a virus that I got rid of but now my printer does not print, it comes up with "the print spooler service is not running" and I can't add a printer.  What should I do to solve this problem.

  It's pretty easy to start the print spooler service... but may not stay started.

  To restart the print spooler:

  • Click Start, click Run, and then type services.msc in the run box, and then click OK
  • Scroll down the list until you get to the print spooler and double-click the entry
  • Make sure that the "Startup Type" is "automatic".
  • Click on the button 'Start '.
  • OK your way out

  In the likely case where this isn't a solution permanent for you, when you post, include the following information:

  1. What version of Windows you have, including the service pack (start > run > winver > OK)
  2. What make and model of printer you have
  3. What antivirus you have installed
  4. If your computer was without an antivirus application or current subscription for your antivirus (in other words, how is it you got infected in the first place)
  5. What steps you have taken to determine that your system is now free of malware (i.e. what applications antivirus and antimalware you scanned the system with)

• problem printer-"the print spooler service does not work.

  tried to add the printer, but get message "the print spooler service is not running" what I do?

  tried to add the printer, but get message "the print spooler service is not running" what I do?

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  Cleaning of printers

  NOTE: If after completing step has the print spooler is not always running after you launched the command "net start spooler", you will not be able to follow all the steps in "First Article".  Instead, go to the other link and download and get and use the utility 'cleanspl' such as described here.

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.  If you have (or had) a Lexmark printer, follow the instructions on the following site before installing the new drivers, as explained in its first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

• Error message-""could not be achieved. " "The print spooler service is not running.

  Can anyone help. Whenever I try to print, I get a message that I need to add a printer, even if I have a printer installed. When I click Yes I Mindprint an another error box saying 'operation could not be performed. The print spooler service is not running"could someone advise how to solve this.

  Thanks in advance

  Matt

  Hello

  ·        Have you tried the steps that are listed in the article manually and see if the problem is resolved?

  ·        Who is the manufacturer of the printer and what is the model?

  ·        When did you get the error message when you try to install the printer or when you try to print?

  I suggest you follow the steps mentioned below.

   

  Method 1:

  I suggest you to check if the Printer Spooler service is started.

  a. Click Start and click Run.

  b. type services.msc in the box run.

  c. find the print spooler service and right click on it.

  d. click Properties and verify that the startup type is set to automatic.

  Method 2:

  Step 1:

  To start in safe mode, follow the steps mentioned below.

  a. restart and keep tapping F8 until you reach the start menu.

  b. Select safe mode and press ENTER.

  Step 2:

  In safe mode, delete the printer and spool driver files. To do so, start Microsoft Windows Explorer, and then delete all files and folders in the following two folders (where C: is the drive where you installed Windows XP):

  C:\Windows\System32\Spool\Printers

  C:\Windows\System32\Spool\Drivers\w32x86

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• printing problem "the print spooler service does not work.

  Original title: printing problem

  I want to print, but a warning said "the print spooler service does not work.  What is c? or what can I do?

  Hello

  I suggest to follow each steps of troubleshooting provided in the link below and also suggest to run the Fixit tool in step 2 and verify if it helps solve the issue

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Error "the print spooler service does not work.

  print spooler - HELP

  my printer disappeared and when I tried to reinstall a message appears that the print spooler service is not runnin - HELP

  Hi masubb1,

  ·         You did changes to the computer before the show?

  You can try the following solutions.

  Method 1: Run the next Fixit tool and see if it helps.

  Problems printing and printing errors

  Method 2: Follow this guide step by step to solve the problem.

  Printer in Windows problems

• How can I fix the error message "the print spooler service does not work."?

  All printer drivers that I had loaded do not work or have disappeared.  After you download the printer drivers, I got the error message: "operation could not be performed.  The print spooler service is not running. "I have Windows XP.  I need to print now!

  To start the print spooler service, click Start > all programs > Accessories > run. In the run box type in services.msc. In the Windows Services window right-click on print spooler and select open. You will then see the options "Start automatically", and then on the button 'Start Service'. Click on those and then click apply then OK. Who should start the print spooler service, however, if you get an error message, see the link below for more information.

  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/391f3c57-5d2b-4E88-ADC6-190429a7fdbe

• Get the message that indicates the print spooler service is not running

  Printer to work, cannot get message reads "the print spooler service does not work.

  Hello

  1. could you give us the exact error message?

  Method 1.
  To resolve this issue automatically, click the fix for this issue link in the article below. Then click Run now on printing problems and printing errors troubleshooting, then follow the steps in this wizard. If the problem persists, perform the rest of the procedure described in the article.

  You cannot add a printer and you receive Printer Spooler error messages in Windows XP
  http://support.Microsoft.com/kb/324757

  Method 2.
  Also, try the methods listed in the section below and check.
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
  http://support.Microsoft.com/kb/308028

  I hope this helps.

  I hope this helps.

• "Cannot install the printer. Operation could not be performed. error 0x000003eb.

  I'm running Windows 7 (not Vista) and trying to install a Kodak printer driver and get "cannot install the printer. Operation could not be performed. error 0x000003eb"I searched constantly everyday for a fix. You have a solution other than what answers are already in this forum.  I uninstalled and reinstalled tried wireless and usb, installation driver separately, tried to install it in safe mode, run now utility scan.  I think that the problem began with an update of Windows 7 which has hung up and eventually having a corrupted file?

  Hello

  What is the exact model of the printer number? I suggest you to check if the printer is compatible with Windows 7: http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx If the printer is compatible, then uninstall all the drivers connected the printer to the computer, download the latest drivers from the website of the manufacturer, the install without connection to the printer. Connect the printer when it prompts. If the problem persists, contact the printer manufactrer for assistance http://support.en.kodak.com/app/contact/selected/true For more information see: http://support.en.kodak.com/app/answers/detail/a_id/1258/kw/Unable%20to%20install%20printer/related/1/selected/true Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Printer cannot print; There is a file in the print queue which will not allow delete and blocks all other files. It's called mtml: I can't print all the documents because of this barrier. What can I do?

  I can't print because a barrier print job is in the queue and refuses to move.  I try to remove it and it will not delete.  Its label as file mtml (mtml:A07448 - 1464-4478 - one...)    I plugged the printer off and unplugged and waited, but he still does not move.

  I was unable to delete the file in question.

• Stuck in the print module, LR does not open

  I was in the 3.5 LR print module and tried to print a file. The printer did not work properly. Now, LR is stuck as if he won't do anything else until the file is printed. I rebooted, deleted the printer, even ran repair on LR 3.5. Nothing helps. Any suggestions? When I try to start LR it opens up where start modules, and then I get the LR has encountered a problem and must close.

  There are a couple of things, you can try (one at a time):

  -Move or rename the LR preferences file. If this does not work, replace.

  -Move or rename the print presets folder. Ditto.

  To find all the two is on this site.

  HAL