Burner DVD Lite-On IT iHAS122-04

Similar Questions

• XP does not support burning DVDs or need for resettlement?

  The combo CD-RW/DVD-ROM drive in my work more former Windows computer has failed. I replaced it with a DVD +/-RW recovered on a newer computer broken. The computer came with Windows 98SE (I said it was my most old), but I had it installed the player that can only play DVD's before the upgrade to XP.

  I thought the Hardware Wizard to detect the new drive looked like XP it can now burn DVDs, but everything concerning the integrated burning guard speaks "copy to CD" or "burn CD" and encouraging me to "insert a blank CD.

  Not XP SP3 doesn't support data DVD burning using built-in tools, or should I reinstall or repair XP to recognize that the only CD burner has been replaced by a DVD burner? It would be easier to find just a 3rd party free tools. I didn't break anything to use as I got a burner that has been integrated into another computer (breath capacitors on the motherboard) burner who gave to a recycling center after having been stripped of useful things like a hard drive replacement, and a 56K modem/fax on a map. (the modem may not be useful nowadays, but fax is).

  I'm afraid that "native" DVD burning was introduced not to Windows until Vista. XP does not support native DVD burning. However, you can use 3rd party burning software. Most "retail" burn the material will be delivered with a CD offering a 'lite version' of such software, for example Nero.

  There are also freebies autour. Many on this forum recommend imgburn

  http://www.ImgBurn.com/

  (I have no experience of this product on which to base a personal recommendation)

• Try to burn DVDs - software decoding error message

  When you try to burn a DVD from Director of windows, he arrives at 2.4% of the coding and then stops and gives the following error message:

  "One or more files that have been added in DVD maker may not be decoded properly.  Make sure you have decoding software installed on your computer that can decode the different files and then try again. »

  Before these last months, we had no problem burning DVD.  Now, whenever we try, it's the error message that occurs.  I am really a novice when it comes to corrections of the computer, so I'm hoping to get appropriate assistance.  Thank you very much!

  Two possibilities come to mind, is an essential Codec you are missing or if you have a defective Codec installed.

  Look for defective Codecs in MOVIE Maker via the Tools / Options / Compatibility tab.  Remove all entries except the AVI compressor.  See if you get more than 2.4 percent.

  Rule out the possibility of miss some relevant Codecs, discover and download and install something like that and test again.

  Basically, the K-Lite Mega Codec Pack is going to play all video files on this planet.

  K - Lite Mega Codec Pack
  K - Lite Codec Pack Full (less features)"

  K - Lite Mega Codec Pack 5.6.1
  http://www.free-codecs.com/download/K_Lite_Mega_Codec_Pack.htm

  There would also be other causes, then you can try some of these.

  Give Movie Maker a clear race by temporarily disabling all startup programs and Services of third party (non-Microsoft).

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  Try System Restore and System File Checker program.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212/#appliesTo

  DVD encode - comes in at 98.9% burned, then fails
  http://www.windowsdvdmaker.com/forums/thread/136.aspx

  Vista - creating Windows DVD fails at 99%
  http://www.Vistax64.com/Vista-music-pictures-video/198083-Windows-DVD-Maker-fails-99-a.html

  Do you have enough space on the DVD for the file, and you have the same amount of free space on the hard disk for the temporary work files (maybe even a little more)?

  This is a FAQ on the Codecs it's Vista related and interesting to read.

  Windows Vista codecs
  http://www.Windows-Vista-update.com/Windows_Vista_codecs.html

• "Reading and burning DVDs in Windows 8.

  Just recently my uncle died, after 76 years, and a DVD were made from photos of his life. I don't have a DVD player. So when I got a DVD in the past (with windows 7) I was watching it on my computer. And if I had a family DVD I would like to make copies for guard duty, I would burn it... Just recently, my old computer with windows 7 past as well. So I bought a new a Windows 8 and found that it will not play or burn DVDs. What can I do? And if I have to upgrade, I would do it with a program/system that is compatible with Windows. I don't have a lot of money through autour, but I don't want for a free system and take the chance of getting malware or virus... Help, please. What is the best program/system for windows 8, which will play and burn DVDs?

  For DVD player, you need to just install K-lite codec pack, then you can play a DVD with windows media player on your windows 8. No need to buy anything.

  For DVD burning, I would recommend you convertxtodvd , works well on windows 8, safe and easy to use.

• Burn DVDs with Imac 2015...

  Hello Forum,

  I just updated my Imac 2011 and bought a newer Imac 2015 and I forgot it doesn't have a DVD/CD player.  Question I'm looking for recommendations on what to buy to be able to burn DVDs, play, DVD and CD.  I have customers who still use the DVD and need to burn and create menus that I am probably able to do with DVD Studio Pro?

  Thank you!

  -Tony

  Apple sells an external USB optical drive specifically for use with models that do not come with an optical drive. You will find in the store.

• How to burn DVD when my Mac Mini is not a taken SuperDriver support

  I made iMovie project. When I wanted to create iDVD project I received a message < Your Macintosh has not have supported SuperDrive. Please note that while you will be able to work with the iDVD project, you will not be able to burn a DVD disc >

  OS X El Capitan

  Mac mini (late 2014)

  Processor 3 GHz Intel Core i7

  16GB 1600 MHz DDR3 memory

  Iris 1536 MB Intel graphics card

  Any body knows how to burn DVD when my Mac Mini does not support SuperDriver.

  Thanks in advance

  Prangins

  1. Purchase an external optical drive
  2. borrow an external optical drive
  3. get use to another Mac equipped with an optical drive

• Burning DVD - R

  I recently bought a laptop TouchSmart tx - 1027ca, as well as support for laptop from HP that I have the laptop usually sitting in tablet mode.  I was wondering if the DVD can be burned at this angle, or if it must be flat on my desk.  I use currently stand is more high angle, but I guess I want to know if it is possible to burn at any one of the three angles.  Also, assuming you can burn at this angle, y at - it no worries about data not being not saved properly compared to if the laptop flat seat.

  I'm sorry if this seems to be a stupid question, but I couldn't find the answer anywhere and just wanted to be sure.

  Thank you very much in advance,

  J..

  OK, ok... just for the pleasure of making this post solved (which I hope it will be Lethal), yes you can burn DVD-R at any angle with the support and there is no data corruption. (This can also be confirmed by the fact that some desktop computers are designed to lie flat on a desk like standing vertically in a position to 'tour' and it is possible to burn media in this position without any problem).

• Equium A100 - CD is no longer burning but still burn DVD

  Hello all you have a problem with my laptop recently I tried to burn a cd and in any program I use says something wrong with the disc etc and burn a little and displays the status bar.
  But I can still burn DVD so I am confused help much appreciated.

  Its model Equium A100 - 306 XP

  Hello

  Try to clean the laser lens with a cotton ball and alcohol tip.
  In my case it helped to solve a similar problem with an optical disk drive.

  But be careful when doing this!

• Satellite Pro L650 - ODD cannot burn DVDs

  I can't burn DVDs. That is to say to ensure that I have the latest firmware I checked and do but still does not work please help

  Can you please tell us which laptop model you have and what operating system are you using?
  Your optical disc drive can read the DVD?
  What burning software do you use?

• A60 burned dvd problem

  Hi help
  Bought equium a60 to burn DVDs using clone, but after about 40 min when watchingburned the picture begins to break up and him freezes

  Hi Kat

  I use the Nero Burning software too and it works great. I t n have no problem. In my notebook, it is DVD multi burner, and I can burn CDs and DVDs successfully. I put t think Hat overheating may be responsible for this.

• Burn DVDs on a60

  I just bought an ea60-155 how can I burn DVD it seems to be no software for this

  Hey Kevin,

  you need software such as Nero or CloneDVD for dvd burning. Most of the programs that you can download from the internet. But after a while, you will have to pay for them.

  Good bye.

  Michael

• Burned DVD - Equium A60 playback

  Hi guys, I was wondering if someone can help me. I have an Equium A60-692 with a Pioneer DVR-K13A CD-ROM drive. The current problem I have is that whenever I insert a DVD that was previously burned, not only by my pc, but others that the CD-ROM drive is unable to read. DVD, that I created in the past that worked very well also stopped play. All I get is the orange led flashing first and then rest it perminently on resulting in a failure in the dvd playback. The player plays original DVD movie very well and plays also any form of cd. Do you think the reader is endangered or is there a setting that has been changed? Any help on this would be greatly apreciated.

  Best regards Richard

  Hello

  It's not easy to say why it of not possible to read the burning DVD.
  You log out of engraving? Sometimes the medium cannot be read because the sessions of burning are not closed. But this is only possible if you burn CD/DVD several times.
  The second possibility could me not supported way. You must use different media.
  However try to remove you drive the Device Manager and reboot the device. The operating system should recognize the drive again. Well maybe this procedure will solve this problem.

• After the last update can not burn DVDs

  Current enforcement 10.11.4 on Imac I5, end 2013 with external dvd player from Sony. Always had trouble make him start to burn but now can't burn DVDs at all. Get connection errors, low connection errors and even several icons on desktop DVD. 14 with good quality dvd using toast. USB is connected to the directly to the mac. ResetPRAM, transported to various ports usb. Sometimes dvd will go up but not available or when you are ready to burn receive error messages. Before last update worked most of the time. Such a simple tsk, which has always been a test since the disc removed.

  Try reinstalling the toasts with the connected reader.

  If this does not work, try resetting the SMC: reset the management system (SCM) controller on your Mac - Apple Support

• Satellite Pro M10: Can I use burner DVD SD-R6472?

  I have a Satellite Pro M10 GR / / model PS630E-G207W-GR. I want to put in a DVD burner. Can I use the slimline burner DVD SD - 6472 R Toshiba?

  Thanks for the quick reply

  Herbert

  Hello

  Unfortunately I have not found any information that would confirm that this drive is compatible.
  But I found this Slim SelectBay DVD Multi drive: PA3231E-1DV1

  This site of Toshiba products:
  e http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/options_and_accessories_search_by_model.jsp?servic = 1 = us & selSeries & selFamily = 2327 & SelCategorie = 2319 & family = 2327 & product = 69238 selP

  However, if you want to order that a 100% compatible and taken in charge by car then please request the Toshiba service in your country. There, you can order the CD.

• Cannot burn DVD-R with my Satellite P100-342

  I bought a Satellite P100-342 two years ago. Some time after I tried to burn DVD + R and it was impossible, so I sent it to Toshiba. A few weeks later, when they returned to my laptop I saw that I can burn DVD + R, but it was not possible to burn a DVD-R.

  I tried with many manufacturers of DVD - R, but no one works.

  I checked my DVD multi recorder (HL-DT-ST-DVD RAM GMA-408N) with Nero Info Tools and it checks ON items: DVD + R and DVD-R. It shows that system ASPI are not installed and I don't know if that's the problem.

  My OS is Windows MCE.

  Will you help me, please?

  Hello!

  This DVD did you tested on your laptop?

  I use discs Verbatim always and never had any problems with it. You may also try verbatim and post workout.

  Good bye