Cannot burn DVD-R with my Satellite P100-342

Similar Questions

• Cannot burn DVD - R with my Satellite M70

  Hello
  I have a Toshiba Satellite M70-169 laptop which has the function
  DVD - R burning. However, when I insert a blank DVD - R, I have a
  message: drive inaccessible incorrect function.

  I think that just a fault of the computer notebook, or something else?
  Thank you.

  Hello

  Burning application you are using? Have you tried just preinstalled Sonic or same Nero?

  Generally avoid any problem. Please test with different applications, as well as with the different media (TDK, Verbatim, etc.).

• Cannot burn DVDs on my Satellite C660

  I just bought a new complete Satellite C660 and I cannot burn DVDs.

  Tried to burn with the recovery media creator, Nero, IMGBurn and all fails at around 75%.
  When I tried to burn the recovery CD as I was asked that they have failed because of a problem STARTING...

  You can create DVDs from recovery use preinstalled Toshiba recovery media creator. Please test using DVD-R media.

  Have you tried using different media of high quality as TDK or Verbatim?

  Sorry, but this startup message said nothing to me. I've never seen something like this, even if I created several on several laptops Toshiba recovery disks.

• Satellite A80-129: Mat * a DVD - RAM UJ-830 s cannot burn DVDs

  MODEL: SA80-129
  DVD RAM TYPE MAST * A DVD-RAM UJ-830 S
  SYSTEM: WINXP
  SOFTWARE: NERO

  (1) DVDRAM CAN READ CD AND DVD EASILY, IT Burns CD WELL, BUT cannot burn DVDs, IT SHOWS: G:\ IS NOT ACCESSIBLE INCORRECT FUNCTION, UNTIL IT WORKS WELL. the blank dvd is not a problem, before I used even type a blank dvd to burn.
  (2) even allow the recoding in the properties, the properties shows the Virgin dvd 0bytes.

  all PROMTLY ANSWER would BE MUCH APPRECIATED.

  It doesn't sound good.
  I had a similar problem of combustion and the end of the story, I replaced the drive ;(
  However, try to remove the drive from Device Manager, and then again to restart the operating system should recognize the device again.
  Then you could check if it able to burn the DVD s s.
  I think you should also try burning different DVD media.

  I have visited many work sites and the reader, and especially the calibration lens malfunction could be responsible for burning problems.
  This could be a worst case and in this case, the replacement is necessary.

• Program for creating Windows DVD cannot burn DVDs

  Program for creating Windows DVD cannot burn DVD due to can not find the DVD burner, free DVD burner disc see on the upper right. But my DVD drive with well with another burning program.

  Hello

  (1) have you made changes before the start of this issue?

  (2) you have the external devices connected to the computer?

  (3) what is the exact full error message?

  (4) is specific to the program the issue?

  Method 1: Clean boot

  How to set up Windows 7 to start in a "clean boot" State

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: Resolution of the problems with creating a DVD-video using Windows DVD creation

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  For reference:

  DVD-video burning: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/DVD-Video-burning-frequently-asked-questions

  I hope this helps.

• Satellite P100-342 - multi-process Core enabled or disabled?

  Hello world

  Just a very quick question: do you have enabled the option "multi-process core" on your BIOS?
  If I set this active on my laptop, the system becomes very slow and I don't know if there is a problem with my laptop or its option for 64-bit laptops.

  My specs:
  Satellite P100-342
  Intel Centrino Duo processor Intel Core 2 Duo T7200

  Thanks in advance!

  Hello

  As far as I know if you select this option, a carrot goes out completely and if the computer is very slow.

  For example if you select this option, in the Task Manager you should only see one CPU core.
  Can you confirm this?

• Satellite L300D cannot burn DVDs

  I have Satellite L300D and Ii took about a year, but I have never tried to burn DVD s. Now I can burn and read CDs perfectly and s DVD playback, but when it comes to s DVD burning it have problems as supplied with the laptop Toshibas program does not work for burn DVD s and other various programs such as Nero and imgburn do not work. I always get write error and other things. Told me it was the discs, so I went and spent money for verbatim DVD's instead of cheap ones and there are still some coasters of each disc, I am trying to burn my DVD burner is

  HL-DT-ST DVDRAM GSA - T50N ata device

  Can someone help me please have tried everything restoring my settings to factory when I bought the laptop as nine and still no joy desperately need help.
  The answers lol?

  Have you tried to create recovery DVDs using the preinstalled Toshiba recovery disc creator?
  Please test with Verbatim DVD - R blank.

• Satellite L20: Cannot burn DVDs - power calibration error

  Hello

  I have problems when you try to burn the DVD on my Toshiba Satellite L20. Nero indicates a "power calibration error". Lens and drive have been cleaned up, but it did not help. Supprisingly, DVR +/-RW and CD are treated correctly. DVD player of any sort is also OK. Only burning DVDs (+/-), regardless of their manufacturer, fails.

  The next step, I wanted to put a fresh firmware in the drive which is Mat * a UJ - 841 S. I found the firmware on another site of PC companies. But the installer stops with the message that it does not apply to my reader however it was designed exactly for this kind of car.

  On the website of Panasonic, manufacturer of the drive, there is the information that support for this model is provided by the hardware vendor - in this case, it is Toshiba. But there is no firmware for this drive on Toshiba support pages.

  Can anyone help me, please.
  Thanks in advance.

  Piotr

  Hi Piotr

  First of all, note that after the installation of non-Toshiba firmware yourself, will lose it warranty for the reader. In any case, on a forum I found an interesting solution. You can try:

  1) click Start
  (2) select control panel
  3) click on Administrative Tools
  4) click on services
  (5) go your way down to SERVICE of the COM of ENGRAVING of IMAPI CD
  (6) right-click (on IMAPI), and then select Properties
  (7) in the middle of the window, it will say start type. Click the arrow on the right and select disabled.
  8) click APPLY

  I also noticed that Nero starts much more quickly than before. I recommend you test different blank media.

• Satellite M40: Power calibration error - drive cannot burn DVD - RW more

  My drive is a carpet * an oem UJ - 831S. After a screw-up partitioning job, I had to format my HD and reinstall Windows XP... and then I can not burn DVD - RW more.

  Tried many programs such as Nero and a fireman, gives an error of calibration of power from the beginning.
  Burning CD - r and CD - RW no problem however, and I can read CDs and DVDs of movies very well.

  Google and searched for a month without success, tried to blow the laser lens, but there is no dust, I tried different media, etc. I know the best answer is that the drive is done, BUT I refuse to acknowledge it because it is too big of a coincedence to stop working right after that I reinstalled XP.

  An interesting note however, my laptop has not been provided with a CD of Toshiba, so I had to reinstall manually more drivers by downloading the Toshiba site, so I have a funny feeling, this could be a thing of the software/firmware, or even a framework.

  I installed the new firmware 1.02 for the reader as well. I don't remember what the firmware was before resettlement, IE the laptop computer settings to factory default, I'd like to downgrade to 1.00 if possible.

  Experts have ideas? And is there a way I can reset the firmware?

  Maybe I could remove the drive from the system-> devices and let XP Reinstall for me?

  Hello

  > I don't know the best answer is that the drive is done, BUT I refuse to acknowledge it because it is too big of a coincidence to stop working right after that I reinstalled XP.

  Of course, it s simply to say the drive is dead because everything looks like a hardware malfunction. Most often the power calibration error appears because of the drive lens can't calibrate in the right position and thus cannot read some CD or DVD s s or it of not possible to write about them.

  But maybe you are a lucky man and might try this procedure:
  -Try to remove the drive physically from the Bay for laptop
  -Restart the unit without the drive
  -In this case the operating system should start from the HARD drive
  -Close the notebook then reinsert the drive unit in the Bay of s for laptop
  During initialization, the laptop should recognize the drive and must pick up the firmware

  Then you can check if you can burn the DVD again, otherwise you will need a new drive

• Satellite M45-S169 - Sonic v.7.31 cannot burn DVDs more

  I am using a v.7.31 Sonic Record now prepackaged on my Satellite M45-S169 for three years now.
  I was able to copy DVDs using this software.
  Until recently, it burns more.

  What's most frustrating is that space of memory on a blank dvd just exhausted once I try to burn dvd on cd files.

  Help! Help! Help!

  Hello

  Have you tried to delete upper and lower filters in the registry of the Windows operating system?
  Isn't it? Try this:
  Completely remove the Upperfilters and Lowerfilters from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Also I would not recommend trying the other and different discs (CD and DVD) from different manufacturers.
  But of course it could also be a hardware problem. I mean the discs of the laser lens has stopped working properly due to mechanical stress.

• Is it possible to burn a DVD-DL with my Satellite M30X?

  Hello!!!
  First forgive me my English because I am from the Spain and I'm not perfect in English...
  I M 30 X a I was looking for a way to burn double layer dvd (DVD9) with it without finding anything. The problem is that when I try to write one with NERO (it crashes with any burning software and I use the latest versions) it stops and says that there is an internal error target in the DVD recorder (the CARPET * a uj 831 s). And it's the only type of dvd itdoes not write because it works perfectly with the dvd - r and dvd + r
  I don't know what to do because I searched a lot and nobody has succeeded to ive me a valid solution. I have also written to support post located on this page, one they have not responded me yet.
  Can someone tell me how to burn DVD DL in this computer? Because it is not normal to buy a computer which is told which allows to burn dl DVDs and once you have it you notice it'simpossible for this.

  Please answer me!

  Thank you!!!

  Hello

  Are you sure that this player supports double layer DVD?
  As far as I know this device was shipped with a super multi drive (single layer) and
  It supports CD-ROM, CD - R, CD - RW, DVD-ROM, DVD-R, DVD - RW, DVD + R, DVD + RW, DVD-RAM.

  In this case, I propose to consult the user manual. You will find the CD/DVD media supported

  Good bye

• Satellite Pro L650 - ODD cannot burn DVDs

  I can't burn DVDs. That is to say to ensure that I have the latest firmware I checked and do but still does not work please help

  Can you please tell us which laptop model you have and what operating system are you using?
  Your optical disc drive can read the DVD?
  What burning software do you use?

• Unknown problems with my Satellite P100-221

  Hello all;

  My laptop Toshiba PC100-211 will not work properly and because the customer service is very far from my location, so first I want to understand if the problem is due to a software or hardware failure so decide to manage.

  I've listed my observations and difficulties in list below:

  (1) internet connection very slow irregular (I checked my internet connection with my friend's cell phone is ok, so the problem causes by my laptop)

  (2) sometimes unreadable screen (yellow traps and sometimes mathematical identical symbols as radical, @,...) in this case the message that windows cannot start no t properly appeared, and then I have to start my laptop in safe mode.

  (3) 4 months ago when I connected to the internet, found the connection problem with the sound as chick chick and I couldn't type the address because the default address is hide constantly and appear and can not select it (now I don't have this problem)

  (4) sometimes the system hung with black screen and no action and I have no chance with the exception of the removal of the battery and restart the computer.
  In this case if I leave it for a long time all of a sudden irregular noise out.

  I used my laptop recovery CD but still I am facing this problem. I'm not sure that I have to reinstall new windows for my laptop (because of the message) or it is a hardware problem (graphics card, modem,...) I have called Toshiba customer service (3 hours driving from my place) and they informed me that they will check and if they find any hardware problem, that they cannot do anything because we bought in the Middle East and we now live in K.L, East Asia!

  Hello

  I find your model of laptop Satellite P100-211 and not PC100-211.
  Is this good? The model number is placed at the bottom of the unit you can check it again.

  With regard to the unique points:

  (1) what connection are you using? WLan or LAN?
  You said its hollow; how little it is? You have values? Have you contacted your ISP that provides access to the internet?

  If you are using WLan, then you should try to update the BIOS and the WLan card driver in many cases, it helps to settle such questions

  (2) possibly it of a question of Windows operating system, if you need safe mode.
  Maybe a new installation of the OS would be useful to know what causes this problem.

  (3), it s really hard to say what s this might be or what caused this problem but it this issue is no longer seen so don t be worried ;)

  (4) as I recommended in the point 1) trying to update BIOS and perhaps a graphics card driver.
  Check if it helps.

  See you soon

• Problem with external monitor when used with the Satellite P100-434

  I'm trying to use a Vizitron L - 151 monitor flat screen connected to the VGA port on the back of my Satellite P100 - 434 (PSPADE)

  I find that the screens seem to periodically - feeding cycle windows resize themselves and then the screens settle down again. This happens with the laptop and the external monitor.

  I've updated the latest available BIOS V4.20 (November 2, 2007) I use 7.15.11.6369 NVIDIA GeForce Go 7600 driver version. I'm under the edition of Vista Home Premium to standard build.

  I even resorted to the use of the dvd system recovery to rebuild completely the laptop and the problem persists. In Device Manager I have generic Non - PnP monitor and below that I have a generic PnP monitor I tried and it is not possible to get specific drivers for the monitor Vizitron L-151. * NOTE * I saw dxdiag that the external display is identified the Non - PnP device

  The display configuration that I'm trying to use is to have my laptop as the main screen with the external display on my left as an extension to the desktop. In display config my computer screen appears as number 2 with the additional display in the poster as a device 1

  While typing this my screens have made this three times and the last time, this IE7 window installs itself to the external display in restored down to size.

  If anyone has a glimpse of it, I would be very grateful. There are no problems when the external display is deleted.

  _I can reproduce this problem on demand_ by uninstalling the monitor Non - PnP Device Manager.

  Sorry, mate, but you ad confuses me a little and be hones I m not 100% sure what you take on
  You have some problems with the resolution of the external display or what?

  I've found another thread on the setting of the external screen as main screen:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=96263#96263

  According to this statement:
  > In display config my computer screen appears as number 2 with the additional display in the poster as a device 1
  It seems that the external monitor has been on the main screen and display books internal as external.

  I recommend you change this settings and to use books appear as 1 and the external display form 2.

• System Recovery works do not with my Satellite P100

  I followed the instructions I saw on many sites to be able to do a system restore to 'out-of-box"State. I've maintained pressed zero and hit the key on and then release the zero key when I hear the beep. After that it only gives me the possibility to proceed to the recovery of the system. It starts just as usual.

  What I am doing wrong?

  Hello Shae

  How to start now? OK Let's ' s go!

  Toshiba recovery procedure can be done with recovery CD/DVD or facilities using images stored on the HARD disk. Image stored on the HARD drive will be offered with the new notebooks only and I am sure that your Satellite P100 is delivered with a CD/DVD media and not the HARD drive recovery option.

  AFAIK this option 0 is for HDD only installation. Please note that this option 0 is not also for all Toshiba laptops. For European books, you can start installation disk with F8 and not 0.

  I hope you understand how this works now. The question is what P100 you have exactly and how you are trying to install OS? You want to use Toshiba Recovery CD/DVDs?