Business cards printing problems.

Similar Questions

• Business cards printing Avery: «the WANDERING MARGIN PROBLEM-upper margin question»

  Does anyone have an idea if HP has an idea on how to charge someone to solve this problem of card perforated business stock do not print correctly?  This problem is now all over the internet.

  I intend to consumerist on-site validation in the hope that they would return to the problem.

  And look at all the other posts for business card printing problems that I looked into this forum and no there are no solutions.  And no huge thick shouldn't matter since everyone here has probably seen a HP catch upwards of more than 3 or more sheets of paper and print on the top, okay...

  I suffer from this PROBLEM of MARGIN WANDERING too.  I have

  have the printer of HP all-in-one Officejet Pro L7680, Windows XP, Office 2007, Microsoft Publisher, model Avery 8873.  I did everything correctly.  Always my business cards print perfectly on regular paper and they print directly from the upper part on the expensive card stock.  It's very frustrating.

  I tried the ideas here.  I tried thick paper, map of Photo greeting, best quality and normal quality.  I tried holding my finger on the map slightly as it feeds in.  I tried folding the sides of the card upward slightly.  I get a print one out of every five success.  I'm so freakin disappointed I could scream.  I've been laid off and I put in network and interviews to attend to and I need my business cards!

  Avery people are useless.  They wanted me to call Microsoft!  I kept saying 'Meg' alignment was very good for ordinary and incorrect paper with a stock of cards Avery.  I asked her if she knew thick HP for card stock printer settings.  She told me to call Microsoft.  I wonder if she was in fact an automaton that accepts no responsibility.

  I thought I bought the best brand printer.  I tried the Brother brand.  They are really lousy.  I really expect HP to be better.

  In the end, I got a few cards that are acceptable.  But I've lost 80%!  If you compare them they are not all aligned the same.  With capacities of shit like that I could just my printer scrap and the contract of employment at Office Depot.  Who needs this aggravation?

  Joe

• OfficeJet 4630: business card printing

  Software = MS DeskTop Publisher 2010

  = AVERY 8373 card Photo quality glossy paper (8 to a 8.5 x 11.0 sheet)

  Thanks to the MS Publisher software, I tried to print a full sheet of cards.  The top cards of 6 print perfect.  The bottom two cards do NOT print.  I tried this twice with the same result.

  Any help will be much appreciated.

  MeadeWayne

  Welcome to the HP Forum.

  Try the following with your label template:

  Avery Wizard for Microsoft® Office

  If you don't have Word, you can use the software online and then print on your printer.

  If you like:

  Click on through the creation of a model, and you can create a template of "plain".

  Add what you want each / all business cards.  You can add tiny photos or Clip-Art to the corners to customize each card and / or add funds.  Add text in any format desired for each card.

  ============================================================================

  The template creates a standard Word .docx document - any type of file owner fantasy.

  Set your printing preferences for media > Brochure glossy or similar so that the printer waits the thick card stock.

  Reference:

  Printing options

  WARNING: I have no interest in Avery - I am a user of the product.

  Click on the Thumbs - Up Kudos to show that you appreciate the help.

  Click on accept as Solution when the answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• OfficeJet Pro 8610: business card printing Officejet Pro 8610

  Recently purchased the officejet Pro 8610 and I was wondering what is the best type of paper or stock for printing business cards

  (Matt and glossy paper types)?

  @himrajbir

  I used Avery "Clean Edge business cards" for a number of years.

  Ink jet business cards Avery #8871

  Regardless of the make or model, buy the right cards for your type of printer:

  Ink Jet

  Help, Suggestions and examples:

  Print Labels_Business-Cards_Cards

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  Fixed / responded? Click this post accept as Solution to help others find answers.

• WINDOWS VISTA BUSINESS AND PRINTING PROBLEMS WITH MY HP 840C DESKJET PRINTER.

  RECENT APPEARANCE, PRINTER GOES THROUGH ALL THE MOTIONS TO PRINT, BUT A CLEAR SHEET COMES THROUGH.  I HVE CHECKED CONECTIONS HARDWARE, OK; CHEC'D SOFTWARE COMPATIBILITY, OK; SMC WOULD HAVE WINDOWS VISTA ONLINE HELP SITES AND SUGGESTED AUDIT SOFTWARE IS USED.  LAURYS ALL OK.  THE MAJOR PRINTING PROBLEM IS WITH MY ONLINE BANKING WHEN I TRY TO PRINT STATEMENTS ETC. ON THIS SITE.  I HAVE CHD'D WITH THE APPROPRIATE SITE TECH PEOPLE AND THAT THEY HAVE NOT HELPED, SAME PROBLEM,...  WOULD APPRECIATE ANY SUGGESTIONS OR HELP WITH SIMILAR PRINTING PROBLEMS!  e > j > t

  Display uppercase is considered shouting & your message is difficult to read and can be ignored by many.

  Say the HP support? Often with an HP printer, the solution the easiest is to unplug the printer, uninstall the HP printer via Add/Remove, runDisk cleaning software and restart. Then download/install latest drivers/software from HP and only connect the printer when the installation says.

  Of course its possible allways the printer failed.

• business cards printing Avery 8871 problem

  I have two cards that I designed and printed without a problem until I got my HP Officejet 6600. I have tried everything I can think, but the cards (on Avery 8871) print too the top of the page. The strange thing is that they print PERFECTLY on regular paper, but when I use the card, it is turned off.  What should I do to fix this?

  Hello

  Could be due to the thickness of the paper. It doesn't support that care: up to 200 g/m2 and 60 to 105 g/m2 paper

  Kind regards.

• Photo card printing problem

  I've used iPhoto before and had no difficulty to print a card using the PDF export option. However, I am trying to print a map now and it exports as 3 pages with the photo, which should be on the front of the card and therefore on the side right of the page, appearing on the left side of the page, the next page is empty on the right side with the greeting on the left side and the next page at the back of the card on the left side with a blank section in the right. It makes me crazy! Can anyone offer me a solution please?  I need to print the birthday card this morning!

  What version of iPhoto, whose theme card do you use?  Any theme card, I tried included only the photos without graphic ornaments.

  9.6.1 iPhoto is very disappointing upon registration of a card preview. It will include photos, but not the graphics that are part of the Aplle stop.

  My quick and dirty way to print the maps must take screenshot of separate pages of the card and arrange them with preview.

• print walks onto the page when printing business cards

  When I print multiple sheets of business cards printing the page begins to wander to the top of the sheet.  If I only print one page at a time, this isn't a problem.  How can I fix?   I have an Officejet Pro e8100 printer works wirelessly on a Win 7 64 bit OS Home premium.

  RickT2,

  Welcome to the HP Forum.

  If the first page prints OK and then subsequent pages tend to stick or the text wanders a bit, then perhaps adjust the media type would help.

  Assumption

  Setting the media type tells the rolls expected in what kind of paper - this could help pull the paper but at the right speed and tension to allow the text to apply to the location appropriate during each pass.

  Paper size and media Type are selected in the printing preferences:

  Control Panel > display icon > devices and printers > right click on your printer >

  Printing preferences > tab paper / quality >

  Select the paper Source > have desired / needed by printer model

  Select the paper size > have desired / necessary for the print job

  Select Support > have desired / necessary for the print job - for example: paper matte brochure for labels

  Ok

  Click on the Thumbs - Up Kudos to show that you appreciate the help and time of our Experts.

  Although I strive to reflect best practices of HP, I do not work for HP.

  Click on accept as Solution when the answer is a good solution or workaround!

• Can I print my own business cards using HP phtosmart?

  I have a HPC4500. Y at - it software to print business cards customized with a picture on them?

  Jugo,

  What I would recommend you do is to download the Avery Label Pro add-in for Word and use it. What we must remember what using it however, is change print you 8.5 x 11 borderless settings when printing. Otherwise, your business cards print about 1/4 inch, especially towards the bottom of the page.

  You can print on cardstock and cut out them yourself or use business cards Avery.

• Unable to print business cards P1102w of Word 2007 / Windows 7

  New computer under Windows 7 and Office 2007, free Wi - Fi to P1102w.

  I had trouble printing envelopes, but set the print properties > source = Auto Select and can now print envelopes ok.

  I tried the same thing when I try to print business cards, print properties > original, is set to auto-select.  The blue led is on, the yellow LED flashes, the Green led is off.

  With my old computer and computer of my wife, we get up a pop box that is labeled Message of State P1102w HP LaserJet professional, subtitled manually flow media, who wants that confirm us that the correct media is loaded in the input tray and requires clicking the button CONTINUE.  I don't get this message on my new computer.

  My wife's computer is running the same operating system and software than mine, we have compared settings and can't find anything that is defined differently.

  Any help would be appreciated, because she is tired of me having to send the files to print them. )

  I FIXED IT! Start > devices and printers > right click on the printer > click on printer properties > Ports tab > checkbox under Port (IP address of the printer) - Description (Standard TCP/IP Port) has BEEN VERIFIED. My wife the box computer Port that has BEEN VERIFIED was (Advanced Port TCP/IP). I checked the Advanced TCP/IP Port and now I get the printer dialog box and everything is going well! Thank you for all your efforts.

• How can I use my electronic business card

  my electronic business card printing vista is on my my Office I follow the signs to leave it Setup Wizard. When I hit the icon it ask if I want t edit or delete.  When I call VistaPrint it says that it must be set up in my e-mail program by using outlook. but the program that I have now is windows mail.  what I can do to use my electronic business card spike sparkle

  Hi Spikesparkle,

  Electronic business card cannot be created by using with windows mail. You must have outlook 2007 is installed on your computer to use it. If you have any questions about the card with outlook, you can post your questions in the discussion of the agency group.
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  http://Office.Microsoft.com/en-us/Outlook/HA100686361033.aspx?pid=CH100776961033

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] Marking a post as answer, or relatively useful, you help others find the answer faster

• I am trying to print business cards

  I just bought a HP Photosmart C4480 all-in-One. I tried to print business cards using the type of stock perforated (equivalent to Avery L7414).

  I can't match the top margin so that printing starts within the perforated area. If I use plain paper that it lines up properly. When I use the cardstock I get different higher margins even if I do not change the setting. It's like as if the map is slippery in the printer after it gets taken up by the rollers and prior to printing. Advice please on what to try a solution?

  Always looks like a mechanical problem, however changing software shouldn't solve the problem if this was true. In any case, I'm glad that you were able to find something that works. My last word of the Advisor; stick with what works.

• LaserJer Pro 200 M351nw: residues of toner to print business cards

  When I print on bond paper, I get a decent, crisp image. But when I print on card stock thre is a powdery residue on the paper. I can drag it with a handkerchief and get a significant amount of powder on the tissue.

  I remember reference to paper stock that is sutiable for color lasers, but I can't find it all in stock business cards anywhere I looked. It is apparently a special paper.

  I went through the type of paper in the printer properties. The only problem is when I print business cards. Is currently trying Avery 5876 and 8876 and Office Depot 3700-R. The 5867 and 3700-R are labeled for use in color lasers. The 8876 is inkjet. Same negative results with all.

  All proposals/solutions would be greatly appreciated.

  Hi @1071 ,

  I see by your post only when printing on cards, you get powdery residue on the paper.
  I want to help you solve this problem.

  You have the Laserjet LaserJet Pro 200 M251nw?  How can I find my model number or product number?

  Usually, when there are residues, burrs, tasks of toner left on the pages is caused by the paper used or the type of paper selected in the printer driver. You already tried different types of paper and had the same results.

  The Avery 5876 you tried are Laser printers.

  It is recommended to use bright white paper or paper that is designed for use in Laser printers.
  Don't use paper that is designed only for use with ink jet printers.
  Progress of paper is porous and for printers inkjet that absorbs ink in the paper.
  Paper Premium isn't for Laserjet printers. Chemicals and the ink soaks into the paper and takes more time to dry.
  Use paper that is not too rough. Generally using smooth paper translates into a better print quality.

  I have provided the specifications of paper for this model.

  Specifications for HP LaserJet Pro 200 M251n and M251nw color printer.

  Up to 200 g/m2 (110 lb. index) cards

  I have a document with a few steps to try to see if this will solve the problem.

  Troubleshooting print quality problems.

  What is the weight of the cardboard?

  What parameter for the type of paper do you use?

  If you need help, let me know.

  Have a great day!
  Thank you.

• When I print business cards, they print sometimes 1/4 too high, but not always.

  I have my business cards in a Word document by using a template Avery. I used the same file for years. I never had a problem with my Canon printer, but after buying an HP Photosmart D110, I got nothing else problems. When I print, then they print approximately 1/4 in. too high ruin cardstock and waste. This happens not all the time. Sometimes I print and they are perfect but when I come back and print another, the problem returns. It is the same strain of the map that I have used for years and when it is inserted in the printer it doesn't matter if it's a single page or a stack of them. I tried the page preview before printing and the alignment is correct. I tried to print to PDF and then print the PDF, same problem. I try on the barrel and no problem. Only reason why I bought it was in the first place the cartridges were cheaper and I do a lot of color printing and scanning.  I just replaced the cartridges and did a head alignment is not the problem. I tried it with plain paper and the problem persists. I'm ready to give up anything to join your room and buy another Canon!

  AuntieEm, thank you very much! It worked flawlessly! Hugs xoxoxo

• HP psc 1315v printer, paper business card 28371 Avery will not print/jump

  Ampad brand paper business card works fine, but the paper business card 28371 Avery and 28878 will not work.  It starts to print then stops with a paper jam error.  Have attempted to assign different types of paper, brochere, brilliant, etc. nothing works.  Other users have had problems with the branded paper Avery?

  WordPad blurs my document, not worth the time to fix it in Wordpad in the hope that it can print.

  Followed your instructions for the Photosmart C310a driver.  Did not work.

  I think I'll just do the trick for the Ampad paper inkjet card brand that works without problem.  Avery is not worth the hassle.