HP psc 1315v printer, paper business card 28371 Avery will not print/jump

Similar Questions

• HP psc 750 color, which has been filled, cartridge will not print.

  HP psc 750 color, which has been filled, cartridge will not print.  Using Windows Vista.  Get the message "check color cartridge".  Only change to the system was making filled the color cartridge.

  Performing the procedure online electrical contacts cleaning service twice without a bit of luck.

  Looking for suggestions as to how to solve.

  Hello. Since the hard reset is not; I would try a new cartridge at this point. The hard reset is one of the most powerful tools when it comes to correcting hardware related problems and error messages.

• My 7210 printer will recognize my xD Card media but will not download to my HP Vista computer

  My 7210 printer will recognize my xD Card media but will not download to my HP Vista computer

  Hello

  could you provide the community with a bit more information to help narrow troubleshooting? What method we use to access the memory card the vista machine?

• All of a sudden, after some editing, my published on catalyst for business slide shows thumbnail will not play.  Which should solve?

  This who should I troubleshoot when all of a sudden after a few changes, my published at the business catalyst miniature slideshows will not play?  They appear on the page, but the characteristics of the States do not work.

  Hello

  Please make sure that "Auto run" is enabled in the slide show options and republish the site.

  In the case it don't fix the part of problem please the site url so that we can take a look.

  

  Concerning

  Vivek

• Photosmart D110 'in paper' mistake, but the paper is present but roll will not stage paper to?

  It seems that there is a white nylon/plastic "thickness" with a roll built in. In addition, it seems that this piece is not working as well as we look at the paper the first tray (bonbout) does not move forward in what I call the breakpoint. When the printer does not see the paper in the next step it gives a "out of paper error ' on the LCD of the printer as well as on the computer screen.»

  The printer was hardly used although it is out of warranty. The ink is the color of 90% and 60% Black. My guess is that it is not worth it Pack and pay to have it fixed.

  Maybe the best I can do is find a HP printer that uses the same ink?

  Hello VPD2265

  If you have not already the case, please try the following article. It may solve your problem.

  Out of paper error

• I ran a diagnostic on my dell xps and he said that my network 9 cards and 11 will not work because of windows

  I went to the Device Manager to see if something was not working and the 9 and 11 adapters will not load not because of something that invovles windows, I didn't understand and I wanted to know if these cards need to work. Also my Intel graphics driver kernel slows things should uninstall.

  Hello

  Make sure you have the latest vista drivers for your computer which you can get your computer manufacturers Web site

  go to their website and look for a driver and software download section

  Enter your model number for the last look drivers vista then download and install

  http://support.Dell.com/support/downloads/index.aspx?c=us&l=en&s=Gen

• PSC 2410xi button 'On' continues to blink, but will not work. Help!

  It is the constant rattling as it is printing but nothing happens.

  Or 'set up' or 'Cancel' the function of the buttons.

  I believe that the error code is 0 x 0000150.

  The post on remove the cover from the scanner glass, disassemble and move the scanner to the left has finally worked on the 4th try, when I moved all the way to the left and pressed the "scan" button until he returned 'home', or all the way to the right for about 90 seconds.

  Somehow the scanner track came down earlier and now seems to be good, and it print a nice and colorful Setup page!

  I was able to use 9mm Torx wrench to remove all screws.

  I go back to the help page and thank the guy who gave the post.

  Greg

• software and star driver hp psc 1315xi all-in-One extracts full but will not load on xp sp3

  Can not find a way to get this to install. After extracting I finally found it in running %Temp%. Searching through all files and folders, trying to find the exe file. to get it to autorun, but was unsuccessful. I tried to install this on 2 different PC with xp pro sp3 but no luck.

  The solution below is from michael323 here in the Forums of HP's Support.  Make sure that you send Bravo!

  I think I have solved this problem.

  I have a PC Windows XP Pro (SP3) who has been affected by this problem.

  Immediately after that the window of 'extraction' went to 100% and closed, nothing happened.  The windows install/never display software.

  Whenever I tried it creates a log file that started with this:

  "Parsed command line: «.\Setup.exe".

  Using datfile: C:\DOCUME~1\xxxxx\LOCALS~1\Temp\7zS1293\autorun.inf

  # GetValueByLang (f-> c_str(), _T (Version), _T (LanguagesInthisCD) failed "

  System LangID = 1033.  mapped to ENU

  # The system language is ENU, but is not on our CD!

  There was other error messages after that, but they all come from lines 3 and 5.

  Something she prevented the installation program to recognize the language ENU files ARE present in this download.

  Comparing two PCs, a problem, and one that works perfectly, I saw that one who was not was AutoRun disabled through a registry setting.  I temporarily deleted this registry on the PC that wasn't and Setup launched and ran like he was supposed to.  Here are the first of this log from the same PC, a few minutes later, where the only difference was that I had removed the registry setting criminalized:

  "Parsed command line: «.\Setup.exe".

  Using datfile: C:\DOCUME~1\xxxxx\LOCALS~1\Temp\7zS1293\autorun.inf

  System LangID = 1033.  mapped to ENU

  We use the system of language = FRA, which is located on our CD!

  As you can see, the message "(LanguagesInthisCD) failed" (line 3) disappeared, and the line 5 (now line 4) shows that it has to recognize that the language ENU installation files are present.

  So if you encounter this problem, and you are comfortable with the system registry, here is how I got it to work on my PC:

  Start regedit
  Navigate to the bottom of this tree
  -HKEY_LOCAL_MACHINE
  -SOFTWARE
  -Microsoft
  -Windows NT
  -CurrentVersion
  -IniFileMapping
  Below, find out if there is a key named "Autorun.inf".
  On my PC (the one with this problem) the value of this key has been "@SYS: nexistepas".
  If your registry database also has this, it may be the cause of your problem.
  In the left pane of regedit, do a right click on Autorun.inf and select "Rename" from the context menu.
  Change the name to something like "Autorun.inf.hold".
  Close regedit
  At this point, I restarted my PC, but I don't know if it is really necessary.
  I ran the downloaded driver file.  It extracted, and the Installer started out as it was supposed to.

  When it was done, I returned in regedit and renamed "Autorun.inf.hold" to "Autorun.inf".

  It is extremely frustrating for me, and (if you need it), I hope that this solution works for you.

• What kind of paper setting should I set my printer to print business cards?

  HP PSC 2210 all-in-one

  Win XP Pro Media 3rd ed.

  No error message

  No changes made to the system

  I am trying to print business cards using Avery 2 faces of business cards printable 5876.

  When I print a test out of my biz on plain paper # 20 cards and adjust the settings so, everything goes well and a walk test using the regular stock # 20 everything comes out great!  But when I put in the stock cards Avery and hit go, the printer goes much more slowly while the scenario and images very dark with excess of toner on the card only stock.  But not on the paper stock. Why is this?

  Should I should change the settings for the automatic printer paper what setting for business cards?  If so, in what context? -Special papers, greeting cards, paper brochure or what?  PLEASE NOTIFY.

  Thank you

  Scott

  Hmm...  I just did a search on the card stock you use, it is designed for laser printing, do not ink jet.  That being the case, I suggest to try the thick paper or plain paper for the paper type.  The product of 8877 Avery may be a better choice for your inkjet printer.

• Business cards printing problems.

  I have a business card holders Avery #8371.  When I try to print a page of 10, the cards do not line up.

  Contact the manufacturer of your printer and are looking for a manual on how to use your printer and change the settings.

  Or read information of technical support of Avery.

  See you soon.

  Mick Murphy - Microsoft partner

• Hallmark Card Studio will not open? I have Windows 7. He has been working

  HALLMARK CARD STUDIO 2010 WILL NOT BE OPEN. I HAVE WINDOWS 7. HE HAS BEEN WORKING.

  Hello

  1 did you change on your computer before this problem?

  2. you receive an error message when opening it?

  You can follow the methods below and see if it works very well.

  Method 1

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: after a follow-up of troubleshooting Step 7: reset the computer to start as usual

  Check whether the problem is resolved.

  Method 2

  If the problem persists, you can uninstall and reinstall the program once more and see if it works very well.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  You can re - install the program on the site of the trademark.

• OfficeJet 4630: business card printing

  Software = MS DeskTop Publisher 2010

  = AVERY 8373 card Photo quality glossy paper (8 to a 8.5 x 11.0 sheet)

  Thanks to the MS Publisher software, I tried to print a full sheet of cards.  The top cards of 6 print perfect.  The bottom two cards do NOT print.  I tried this twice with the same result.

  Any help will be much appreciated.

  MeadeWayne

  Welcome to the HP Forum.

  Try the following with your label template:

  Avery Wizard for Microsoft® Office

  If you don't have Word, you can use the software online and then print on your printer.

  If you like:

  Click on through the creation of a model, and you can create a template of "plain".

  Add what you want each / all business cards.  You can add tiny photos or Clip-Art to the corners to customize each card and / or add funds.  Add text in any format desired for each card.

  ============================================================================

  The template creates a standard Word .docx document - any type of file owner fantasy.

  Set your printing preferences for media > Brochure glossy or similar so that the printer waits the thick card stock.

  Reference:

  Printing options

  WARNING: I have no interest in Avery - I am a user of the product.

  Click on the Thumbs - Up Kudos to show that you appreciate the help.

  Click on accept as Solution when the answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• I am trying to print business cards

  I just bought a HP Photosmart C4480 all-in-One. I tried to print business cards using the type of stock perforated (equivalent to Avery L7414).

  I can't match the top margin so that printing starts within the perforated area. If I use plain paper that it lines up properly. When I use the cardstock I get different higher margins even if I do not change the setting. It's like as if the map is slippery in the printer after it gets taken up by the rollers and prior to printing. Advice please on what to try a solution?

  Always looks like a mechanical problem, however changing software shouldn't solve the problem if this was true. In any case, I'm glad that you were able to find something that works. My last word of the Advisor; stick with what works.

• Business cards printing Avery: «the WANDERING MARGIN PROBLEM-upper margin question»

  Does anyone have an idea if HP has an idea on how to charge someone to solve this problem of card perforated business stock do not print correctly?  This problem is now all over the internet.

  I intend to consumerist on-site validation in the hope that they would return to the problem.

  And look at all the other posts for business card printing problems that I looked into this forum and no there are no solutions.  And no huge thick shouldn't matter since everyone here has probably seen a HP catch upwards of more than 3 or more sheets of paper and print on the top, okay...

  I suffer from this PROBLEM of MARGIN WANDERING too.  I have

  have the printer of HP all-in-one Officejet Pro L7680, Windows XP, Office 2007, Microsoft Publisher, model Avery 8873.  I did everything correctly.  Always my business cards print perfectly on regular paper and they print directly from the upper part on the expensive card stock.  It's very frustrating.

  I tried the ideas here.  I tried thick paper, map of Photo greeting, best quality and normal quality.  I tried holding my finger on the map slightly as it feeds in.  I tried folding the sides of the card upward slightly.  I get a print one out of every five success.  I'm so freakin disappointed I could scream.  I've been laid off and I put in network and interviews to attend to and I need my business cards!

  Avery people are useless.  They wanted me to call Microsoft!  I kept saying 'Meg' alignment was very good for ordinary and incorrect paper with a stock of cards Avery.  I asked her if she knew thick HP for card stock printer settings.  She told me to call Microsoft.  I wonder if she was in fact an automaton that accepts no responsibility.

  I thought I bought the best brand printer.  I tried the Brother brand.  They are really lousy.  I really expect HP to be better.

  In the end, I got a few cards that are acceptable.  But I've lost 80%!  If you compare them they are not all aligned the same.  With capacities of shit like that I could just my printer scrap and the contract of employment at Office Depot.  Who needs this aggravation?

  Joe

• OfficeJet Pro 8610: business card printing Officejet Pro 8610

  Recently purchased the officejet Pro 8610 and I was wondering what is the best type of paper or stock for printing business cards

  (Matt and glossy paper types)?

  @himrajbir

  I used Avery "Clean Edge business cards" for a number of years.

  Ink jet business cards Avery #8871

  Regardless of the make or model, buy the right cards for your type of printer:

  Ink Jet

  Help, Suggestions and examples:

  Print Labels_Business-Cards_Cards

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  Fixed / responded? Click this post accept as Solution to help others find answers.