Buy or not to buy - that is the question

Similar Questions

• Purchase T530 buy backlit keyboard or not to buy that is the question

  Want to buy T530 wouldn't mind a backlight, but can happen.
  It has been said by someone on these forums that the backlit chiclet keyboard not and
  backlit, it has a different feel.

  They said that no backlit keyboard is similar to tactile sensation
  Non-traditional chiclet keyboard. While the backlit chiclet keyboard is sweeter
  and does not require as much pressure to register for a key

  Lenovo said that two keyboards had feeling and the same feedback

  What anyone here have experience with both and I can confirm?
  I would like just a little more opinions on this matter before deciding

  Thank you

  I make my own advice for the backlit keyboard. The new chiclet keyboard is slightly different from the old keyboards 7 rows while you will need to make some adjustments in all cases. The backlight function is a boon in a dimly lit environment. It is quite useful to do.

• My MacBook Pro runs very slowly.  I El Captain 10.11.4 rare apps on it, most are closed while I'm on safari.  My photos take a 125 gb storage capacity.  If that is the question, what external hard drive is recommended?  If not, what is?

  My MacBook Pro runs very slowly.  I El Captain 10.11.4 rare apps on it, most are closed while I'm on safari.  My photos take a 125 gb storage capacity.  If that is the question, what external hard drive is recommended?  If not, what is?

  Download and and publish a report of Etrecheck:

  http://etrecheck.com/

  Ciao.

• HP G60-126NR: laptop does not start unless that removed the CMOS battery

  I have a HP G60-126NR laptop. One day she was cold stone when I press the power button / stop. I unloaded the mothboard.  I then installed a new CMOS battery. I use the power supply to the power supply adapter. When I press the power button, I get nothing toally dead, except to show the light of connection. If I remove the CMOS battery, then discharge the motherboard again, then plug in, and the portable lights without power button / stop touching and goes into the Configuration screen to access in time. After time, it starts in Windows without a problem. SFC Windows scan shows no errors. If I stop, not sleep, the laptop died again unless I dump the motherboard and start from the square. In addition, I would like to say that when Windows is running, if I close the lid to put to sleep, you can see that the screen is still active despite change 'what happens when I close the lid. My diagnosis tells me that it needs a new motherboard.

  PS: I flashed the BIOS off HP site thinking that it would solve my problem, but it has not...

  The problem has been resolved. The jury of ciruit combination touch pad for power and WiFi was broken and has been replaced. Normal unit operation.

• Hide advanced action does not work after that triggered the effect

  I have a pretty simple step action that does the following:

  Hide banner

  Apply motion effect to 3 SmartShape from right to left

  Cache: SmartShape3

  
  SmartShape 3 is essentially half a rectangle rounded, which acts as a banner with text. At the beginning of the slide, it is hidden and sitting almost out of the scene. When you click a button, it does the following:

  See the banner

  Show: SmartShape3

  Applies the effect of movement from left to right to SmartShape

  This gives the illusion that it slides in from the left. The reason why I had it sat a little on the scene at the beginning, is that the effect is slow, so this makes it speed up as it has less distance to travel.

  The idea is the action above in blue is triggered and the banner slide from the left on the stage. Another button is pressed and the Red action is triggered sliding off the stage. But once the motion effect has been run, it does not seem to hide, leave the end of the rounded rectangle visible on the stage.

  I tried to adjust the break lines in the buttons that trigger these actions further pushing them to the bottom of the timeline, but it has no effect. I actually expected to start the path and then hide the shape so fast, that you wouldn't see in fact a large part of the effect as when stocks advanced spear they are super fast.

  Am I missing something or is this just a limitation with effects using advanced Actions?

  You have a misunderstanding about the actions. All orders in a fast action are executed in sequence, but immediately. The effects also have a duration, you don't say how long you have applied.  Can you post a screenshot of the timeline? Have you checked the length of the path, is it enough? You do this using the same temporal effects. BTW, I often apply such an effect using micronavigation instead of applying it. In my last blog, you can see an example:

  More in a... hyperlink - drop-down Menu - Captivate blog

• for bitmap or not, that is the question

  Hello my friends tuning.
  
  I'm running Oracle 11.2 (on Solaris 10) for a database very active OLTP, but which is also frequently used to pull reports on the more volatile critical table in the database.
  
  My database has anywhere from 100 to 400 concurrent users.
  Our application (REMEDY) is designed to put 'tickets' in one main table (with about 560 fields that 40 are CLOB).
  The dilemma, I need help is if we put a little map on some low cardinality columns indexes or not.
  And, besides, the number of columns in this table is very low cardinality.
  My fear is that I fear that putting a bitmap on a highly active OLTP table index might decrease the performance of ticket creations (new lines in the table).
  Can or, if I did, I have a job done every night that re-creates the index bitmap on this table?
  But what about performance on the table between the time to rebuild the indexes of BM?
  
  In this case, it is a query that is run on our main table (containing the records of about 6 m and is 16G in size).
  When I look in OEM, I see that he did a scan of full table on this table and in this case, returns only the records of 262.
  Of course, you can deduce that the columns in the predicate clause are very low cardinality (by the names of the columns and the values you want).
  

  SELECT "Main_Ticket"."SHORTTICKETNUMBER"      ,
          "Main_Ticket"."OUTAGESEVERITY"        ,
          "Main_Ticket"."OUTAGESEVERITYTEXT"    ,
          "Main_Ticket"."OUTAGESERVICESLIST"    ,
          "Main_Ticket"."OUTAGESTATUS"          ,
          "Main_Ticket"."OUTAGEOVERALLSTARTTIME",
          "Main_Ticket"."OUTAGEOVERALLENDTIME"  ,
          "Main_Ticket"."CITY"                  ,
          "Main_Ticket"."STATE"                 ,
          "Main_Ticket"."MASTEROUTAGE"          ,
          "Main_Ticket"."GROUPCREATEDBY"        ,
          "Main_Ticket"."GROUPASSIGNEDTO"
  FROM "ARADMIN"."MAIN_TICKET" "Main_Ticket"
  WHERE "Main_Ticket"."OUTAGESEVERITY"<=2
          AND NOT
          (
                  "Main_Ticket"."GROUPASSIGNEDTO" LIKE 'BBSG%'
                  OR "Main_Ticket"."GROUPASSIGNEDTO" LIKE 'CIA%'
                  OR "Main_Ticket"."GROUPASSIGNEDTO" LIKE 'DESIGNED%'
                  OR "Main_Ticket"."GROUPASSIGNEDTO" LIKE 'IHD%'
                  OR "Main_Ticket"."GROUPASSIGNEDTO" LIKE 'NABB%'
                  OR "Main_Ticket"."GROUPASSIGNEDTO" LIKE 'NCC%'
                  OR "Main_Ticket"."GROUPASSIGNEDTO" LIKE 'NFC%'
          )

  I guess that put the index bitmap on 'OUTAGESEVERITY '.
  Not sure about the GROUPASSIGNEDTO, because it uses the SIMILAR function and may not use the index BM if she had a.
  In this case, an FBI would be better?
  
  Published by: 974632 on February 27, 2013 06:29

  put a bitmap on a table with DML heavy index looks like a very bad idea and I would not even sure if it would help your request (which is the number of values<=2 compared="" to="" the="" total="" number="" of="" rows?="" -="" if="" this="" is="" a="" significant="" amount,="" then="" a="" full="" scan="" is="" propably="" in="" order="" anyway.).="" put="" an="" fbi="" on="" the="" text="" column="" is="" also="" not="" very="" likely="" to="" help="" you="" out,="" especially="" with="" the="" not="" clause.="" it="" would="" be="" much="" easier="" to="" reverse="" the="" logic="" here="" like="" ...="" and="" groupassignedto="" in="" ('group1',="" 'group2'...)="" as="" long="" as="" the="" number="" of="" different="" values="" can="" be="">

  In general, how do you the idea to keep a second copy of this table for reporting? You can create a view, materialized from this table and then create your index bitmap on this MV and run your reports against it. Maybe you could get away with just a drink a day? And the strengthening of this way that you will not lose DML performance against the table real all performance reports. Just an idea

  Bjoern

• Submit a Mutli-question application to Apple without that complete the question.

  When you submit a multi-question DPS app to the App Store for the first time, Apple requires only the full first issue with the container application? I would like to present the application container for Apple this week with maybe a little teaser article (1-2 screens), but the first real question won't be for another 2-3 weeks. I would like to introduce at the beginning so that at the time wherever I finish all the question, will Apple has already approved the presentation of app container. Oh, and the questions will be free.

  If your application displays no content in the library, Apple will reject. If you provide a partial question with only a two or three items, Apple could not approve it. I think it's a good idea to present from the beginning, but you might want to delay this until you have a reasonable amount of content.

• Clip + does not turn so that in the USB (loading)

  Hello!

  Been happy with listening FM Fort enough thanks to this forum (had a problem with low volume), but everything was OK until the battery lasted... FM mode which was about 6 hours. I plugged the drive into the USB port on the computer, but cannot activate it now. What is the solution? It is not possible that it cannot be used while charging.

  But, of course, you can play the contents of the item through your computer when you are connected to your computer.

• Version 6.0 of Windows Mail in Windows Vista does not all emails that hit the server.

  Hello

  I use Windows mail, version 6.0.6000.16386. for Microsoft Vista.

  It seems tht that not every email will make it through Windows mail. I checked with my internet provider and we can see the e-mails hit the server, but it was as if Windows mail has been picking up a choice than to receive mails.

  When we access the server directly, it seems to work. Anyone can help?

  Thank you.

  Simply select the account under Tools | Accounts | Mail, then click on remove.  You will need to know the parameters to set it up again.  McAfee is known to cause problems with Windows Mail.  You will not be able to correct them if you continue to use McAfee.  Alternatively, you can try to compact and repair the database of WinMail to see if that helps (see www.oehelp.com/WMUtil/).

  Steve

• DD - WRT or not, that is the question!

  I just bought the WRT610N (on sale for $145 =)) and I see that version 2 of this router is now supported for DD - WRT

  My implementation is download torrents on my Windows Home Server, and I stream video of my Popcorn Hour of this machine as well. I have then playing XBox 360 online and listen to music from my Macbook Pro to my Apple TV.

  It is close enough to the Miller of bandwidth in my house. I'm upgrading to a WRT310N (he died) who had DD - WRT. I put DD - WRT on this router because I had a Macbook, which would connect 50 percent of the time until I put DD - WRT on it but I found I have to disconnect my WHS, whenever I want to play some XBox Live, even after I install QoS.

  This router has a technology called 'Technology Media Optimized Network' (DLink calls their 'fuel HD'), I hope it will work better then the QoS on DD - WRT.

  So my main result is, I want to be able to play XBox Live videos and stream to my pch with out having to unplug the ESM.

  If you have experience with the WRT610v2 with two firmwares or have some tips on how to make this work, I would be very grateful.

  Thank you very much.

  Coasttech.

  I had all the ports opened and had the xbox in the demilitarized zone. Still does not work.

  I had the 610 for a day now and can notice a big difference in performance. So far I'm happy, but as I said, this has been a day. I miss logging of bandwidth and a much better status page with all kinds of good info that DD - WRT designated operational entities and a bunch of other things. I wish linksys would not lame and put some better features in routers out there. I looked about the same user interface since the beginning of the 2000s, time to change!

• To update blackBerry Smartphones or not up to date - that is the question...

  I'm really confused.  I just got a replacement Tour from Verizon.  On several occasions, when I am connected to Desktop Manager v5, a list of the updates appeared.  However, I didn't do the updates at this time. Now, when I log in, I get the message that I don't need updates.  The version on this phone is v4.7.1.40 (Platform 4.1.0.40).  Should I update?  If so, what is the best method to do so - since the Verizon site or the Blackberry site?  I'm a bit wary since the last time I did the update of the os, I almost lost everything on my phone.  So, I hope I have the last version/patch, etc...

  Also, I have internet download manager, which includes my downloads.  Is that going to be a problem - not updated must be done via the Desktop Manager software?

  Thank you.

  Liz aka tilly

  Bifocals,

  You have been very helpful once again.  I does not level up to what Verizon offers it or I'm having a problem making do if necessary.  Thanks for the useful JL-CMDR link - I'll upload that I do an upgrade my computer in the case.

  I am a mental health professional and that you accept that Hamlet would be much better with the Blackberry - it's better than antidepressants.

  Liz

• CP1518ni on Win7 64 bit does not print unless that ' ignore the ' is on

  I get the message "replace supplies" and the printer does not print unless the 'out' substitution is turned on. I replaced the ink once and then got the message "replace supplies" in the following days.  I installed HPPDU which refers to the series CP1510 PCL6. the diagnostic screen says everything is fine. I also downloaded the 20100616 update.  I noticed that the 'solution' ToolboxFX does not work with Win 7.

  What Miss me?  Should I continue printing under "replace" until all four cartridges run out completely, and then trust that the printer will work without the substitution on the future cartridges? Thanks for your help on this.

  Bkaytee

  Yes, it is possible that drive e-lable contact has malfuncioned.  I would say that your options is as follows:

  A. keep the game of "substitute for" will continue to work and should cause no issue. (It doesn't stop that monitoring of level of supply of Toner, then when degrades the quality of printing, then a new toner must be purchased.)

  B. contact HP support for service possible. 1-800-474-6836 1-800-HP-Invent

  Thank you

• Multi-Maison or no multi home; That is the question

  Hi all

  This isn't technically an ESX question, but it's a question that arises for us due to how it is easy to add additional network cards (and thus the network connections) for virtual machines hosted on our ESX boxes. I'm curious to hear the views of others on the issue.

  Heart - when you have a virtual machine that requires access to several VLANs, do you tend to add additional network cards to the virtual machine that connects them directly to these VLANs, or did you just a NETWORK card and route traffic for VLANs via a router/firewall?

  A VirtualCenter to virtualized server is a perfect example: at the very least this needs access to your local network a LAN VLAN (for administrator access to the VC, to speak with the domain controllers), and VIRTUAL management (to talk to the ESX host) etc. As a general rule, would people connect a NETWORK adapter in the virtual VC machine to one of these two VLANs and access the other VLAN via a router/firewall, or would connect you two network adapters on the computer virtual VC, one in each of VLAN?

  Curious to know how others deal with it - thank you.

  See you soon,.

  Matt Kilham

  Hello

  From a security point of view, you would add no additional network cards in different VLANS. If you do, basically ignore you the router/firewall. It of a securityrisk if the box "breaks" or routing is on accidental. I always put VMs in the VLAN they belong (DMZ, inside, OUTSIDE, regardless of SERVERS) and to determine what can the VLAN ACL and can not do to other virtual local networks and internet. Sometimes I drill smaller holes, like when an application server is outside and inside SQL. I then punch a hole from the application server for SQL server (based on IP addresses) and only opening 1433/tcp.

  Of course, there are a few exceptions. One is an ISA Server. This server is using generally two or three network cards in some segments, since it IS the router/firewall. I use an ISA Server, who has earned two VLAN to its own. So my router determines what input and output (port level), ISA can do the rest (www split on headers, proxy, etc.).

  Another exception, I have at home (sick I know), which is my download WHAT VM is in one VLAN different than the file server. So my VM download a big file, and then I move to the file server. My router has however limited the performance (around 5-6 MB/s), so I gave to the download area a second NETWORK adapter in the same VLAN as the server files (shame on me), now it copies +-30 MB/sec...

  Visit my blog at http://erikzandboer.wordpress.com

• Calculation of the measure or NEITHER, that is the question!

  Well actually this isn't one more question.

  http://www.measurementcomputing.com/press_release.asp?PR=55

  OR purchase MC.

  Is anyway for me to go back and change all of these positions were I said using lead stuff and NO development faster than with a MC?

  Ben

  Ben wrote:
  Is anyway for me to go back and change all of these positions were I said using lead stuff and NO development faster than with a MC?

  Well, that's probably still true .

  Similarly, the CMC website still maintains their comparisons side-by-side, punch-by-punch with competing products OR.
  

  Message edited by altenbach on 30/04/2005-11:41

• Can send via e-mail Wndows Mail(Vista 64-bit) but can not receive & when I close the WM I get the window that says to compact messages.

  I am able to send email in Windows Mail but cannot receive e-mail.  When I click on receive all messages, it stops just downlod.  OS is Vista Home Premium.  I just defragged, did it he ruin?

  Make sure that your antivirus software is not interfering.  That's the problem most often met with this kind of problems.  Check first via webmail, if you have access and see if the account is good working there.  If so, then check out www.oehelp.com/OETips.aspx#3 and try to remove your email account, closing and reopening WinMail and then add your account back once again and then see if it works very well.

  Steve