Clip + does not turn so that in the USB (loading)

Similar Questions

• Hide advanced action does not work after that triggered the effect

  I have a pretty simple step action that does the following:

  Hide banner

  Apply motion effect to 3 SmartShape from right to left

  Cache: SmartShape3

  
  SmartShape 3 is essentially half a rectangle rounded, which acts as a banner with text. At the beginning of the slide, it is hidden and sitting almost out of the scene. When you click a button, it does the following:

  See the banner

  Show: SmartShape3

  Applies the effect of movement from left to right to SmartShape

  This gives the illusion that it slides in from the left. The reason why I had it sat a little on the scene at the beginning, is that the effect is slow, so this makes it speed up as it has less distance to travel.

  The idea is the action above in blue is triggered and the banner slide from the left on the stage. Another button is pressed and the Red action is triggered sliding off the stage. But once the motion effect has been run, it does not seem to hide, leave the end of the rounded rectangle visible on the stage.

  I tried to adjust the break lines in the buttons that trigger these actions further pushing them to the bottom of the timeline, but it has no effect. I actually expected to start the path and then hide the shape so fast, that you wouldn't see in fact a large part of the effect as when stocks advanced spear they are super fast.

  Am I missing something or is this just a limitation with effects using advanced Actions?

  You have a misunderstanding about the actions. All orders in a fast action are executed in sequence, but immediately. The effects also have a duration, you don't say how long you have applied.  Can you post a screenshot of the timeline? Have you checked the length of the path, is it enough? You do this using the same temporal effects. BTW, I often apply such an effect using micronavigation instead of applying it. In my last blog, you can see an example:

  More in a... hyperlink - drop-down Menu - Captivate blog

• CP1518ni on Win7 64 bit does not print unless that ' ignore the ' is on

  I get the message "replace supplies" and the printer does not print unless the 'out' substitution is turned on. I replaced the ink once and then got the message "replace supplies" in the following days.  I installed HPPDU which refers to the series CP1510 PCL6. the diagnostic screen says everything is fine. I also downloaded the 20100616 update.  I noticed that the 'solution' ToolboxFX does not work with Win 7.

  What Miss me?  Should I continue printing under "replace" until all four cartridges run out completely, and then trust that the printer will work without the substitution on the future cartridges? Thanks for your help on this.

  Bkaytee

  Yes, it is possible that drive e-lable contact has malfuncioned.  I would say that your options is as follows:

  A. keep the game of "substitute for" will continue to work and should cause no issue. (It doesn't stop that monitoring of level of supply of Toner, then when degrades the quality of printing, then a new toner must be purchased.)

  B. contact HP support for service possible. 1-800-474-6836 1-800-HP-Invent

  Thank you

• Pavilion 15, G8D9OPA #ACJ: my laptop does not turn on after pressing the power button

  HII, after a week that I have on my computer hp laptop 11 months but its not get. I even removed the battery and tried to get by pluging the adapter, but it doesn't work. What I would do. Please help me.

  Hi @Swati_20,

  Welcome to the HP Forums!

  It's a great place to find answers and advice!

  You have the best experience in the HP forum, I would like to draw your attention to the HP Guide's Forums:

  Learn how to post and much more.

  I understand that your Pavilion laptop not turn on.

  When I did a search with the product number, you provided I have no results.  Would you be kind enough to verify this information.

  How can I find my model number or product number?

  What operating system do you use?

  When you connect it to the power light on the power supply?

  Here is a link to the HP laptops - tests and using the AC adapter that can help.

  You can also try a hard reset.   HP - notebook computers use the hard reset to solve software and hardware problems

  Please keep me updated.

  Good luck!

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as yourself. Please consider tagging the post in order to resolve your problem as " ""Accept as Solution"" " to help other members of the community!

  To show the appreciation for my efforts, please click the 'Thumbs UP' icon' below.

• HP G60-126NR: laptop does not start unless that removed the CMOS battery

  I have a HP G60-126NR laptop. One day she was cold stone when I press the power button / stop. I unloaded the mothboard.  I then installed a new CMOS battery. I use the power supply to the power supply adapter. When I press the power button, I get nothing toally dead, except to show the light of connection. If I remove the CMOS battery, then discharge the motherboard again, then plug in, and the portable lights without power button / stop touching and goes into the Configuration screen to access in time. After time, it starts in Windows without a problem. SFC Windows scan shows no errors. If I stop, not sleep, the laptop died again unless I dump the motherboard and start from the square. In addition, I would like to say that when Windows is running, if I close the lid to put to sleep, you can see that the screen is still active despite change 'what happens when I close the lid. My diagnosis tells me that it needs a new motherboard.

  PS: I flashed the BIOS off HP site thinking that it would solve my problem, but it has not...

  The problem has been resolved. The jury of ciruit combination touch pad for power and WiFi was broken and has been replaced. Normal unit operation.

• Kodak in a 2150 does not print wireless. compatible with the usb cable. Help

  My printer prints not my lap top. It works already. I uninstalled the program and reinstalled and it still does not print. I turned off the printer for a minute and I turned my router for a minute and they turned back. I don't know what else to do. Help, please.

  See if it helps:

  Lost on printer all-in-one Wi - Fi
  http://support.en.kodak.com/app/answers/detail/A_ID/2741/selected/true

  The guests to answer and follow the troubleshooting.

• Bootcamp does not have enough space on the USB drive.

  Hello everyone,

  I am trying to install Windows 7 on my Macbook pro mid-2012 running on El Capitan.
  I want to do with a USB key, I bought a 16 GB nine one. Try to create the USB bootable with Bootcamp, I get the error that the USB device is too small. I don't know why that it is 16 GB.

  Then I tried to format using disk utility, but I get an error.

  I tried to use the command line to do with diskutil, always get an error: impossible to disassemble the drive.

  Using diskutil I can see the USB key:

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 15.5 disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_HFS Untitled 15.2 GB disk1s2

  I tried to erase the part EFI using gdisk, everything is ok in gdisk, I can just erase and write to the disk. But the problem is that when I unplug and re-plug the USB nothing has changed...

  Try to use under Windows (via VirtualBox) I see only a 200 Mb USB Drive.

  I don't really understand everything first:

  -Why bootcamp with the new USB has not been able to make a USB bootable for windows.
  Second:

  -Why can't I erase this USB key.

  Thanks for reading. I hope you can help me or tell me at least!

  You must delete and format the USB stick in the form of FAT. What is a USB2 flash drive? A GPT with a FAT partition will not work.

  Please see Re: Please format the USB key as a single partition FAT.? on how to do to erase/format the USB.

• X1Carbon does not start after restoration of the USB

  I have a new X 1 carbon 3443CTO Win8/64. After the configuration and test, I wanted to give it to one of my users so I did a "factory restore" using recovery media created by following the guides posted here and elsewhere:

  Control the media of Panel\Recovery\create etc.

  Went as expected. When I ran the recovery - I have taken a step further and called Lenovo as the step that calls for repartition disks reported ambiguously: 'No' (keep existing partitions) reported that a partition is not found "required" Yes seemed exaggerated. The tech told me to proceed by Yes.

  Once the recovery is complete - the system has rebooted. Restarted in the Boot Manager - I chose HDD0 and was immediately referred to the Boot Manager. I called Lenovo and referred to my existing case and told me; "Well do it all again" I did. Same result.

  So - I have created another USB key from a whole new 3443cto carbon X 1 and ran in recovery - same result.

  I then created another set of recovery on a new USB - same result media.

  When I access training with Advanced\Command prompt the windows directory, program files, etc are all there, but nothing I do (Ran BCD fix mbr etc.) will only boot disk.

  Any ideas?

  Today, I called Lenovo and the only choice that gave me was back which I guess I do.

  Question - is a downgraded supports or has a return Service support has deteriorated since last year?

  Before leaving the office, I decided to repeat the exercise once more. This time, I used USB 3.0 500 GB drive that I created last night. I ran the option "update files". When he finished the system booted Windows 8 However he presented me with an opportunity to enter a name and a password. The previous credentials did not work, nor null credentials and there is no option to create a new account.

  I have re-run recovery, this time choosing to keep partitions and basically do a factory instead of reformatting redefined and.

  Once completed, the system booted Windows 8 and the possibility to choose the country. At that time, I have dagprogramm off the system. I guess it's back to the new factory.

  My hypothesis is that in the course of the original tent to refresh something has gone wrong with the drive and running BCDedit solved the problem? Who knows?

  In any case-problem solved. What worries me is that never once in 3 calls, I did Lenovo has someone at - he tried to help me solve the problem. I am the author of the decision - I choose servers, desktop computers and laptops. We use Dell servers and desktop computers the Thinkpads for laptops.

  Support IF Lenovo has become this bad, I'll start to buy Dell laptops. I think I have to raise my w/Lenovo support.

• Preloader does not close after that primary site is loaded

  Hi guys,.

  I know it's a really really basic problem, but I am very new to flash and still don't understand AS3.

  I use the sample file external preloader provided with CS5 as a basis for my front loader on measure. It works fine except that once the main site has loaded and is open, the preloader is loaded in the background.

  My code is as follows:

  var contentLoader:Loader;

  loadContent ("index.swf");

  function loadContent(url:String):void {}

  contentLoader = new Loader();

  contentLoader.contentLoaderInfo.addEventListener (ProgressEvent.PROGRESS, loading);

  contentLoader.contentLoaderInfo.addEventListener (Event.COMPLETE, contentLoaded);

  contentLoader.load (new URLRequest (url));

  }

  function contentLoaded(evt:Event):void {}

  Change in //Optionally a portecrochet and the visibility of all of the progressbar.

  addChild (contentLoader);

  removeChildAt (0);

  }

  function loading(evt:ProgressEvent):void {}

  var loaded: number = evt.bytesLoaded / evt.bytesTotal;

  setBarProgress (loaded);

  }

  function setBarProgress(value:Number) {}

  progressbar.bar.scaleX = value;

  }

  How can I make the pre-loader close itself once the main site has been loaded correctly?

  Any help would be really appreciated!

  Thank you!!!

  use:

  var contentLoader:Loader;

  loadContent ("index.swf");

  function loadContent(url:String):void {}

  contentLoader = new Loader();

  contentLoader.contentLoaderInfo.addEventListener (ProgressEvent.PROGRES S, loading);

  contentLoader.contentLoaderInfo.addEventListener (Event.COMPLETE, contentLoaded);

  contentLoader.load (new URLRequest (url));

  }

  function contentLoaded(evt:Event):void {}

  Possibly set up a support clamp and adjust the visibility of the progressbar.

  addChild (contentLoader);

  removeChild (progressbar);

  ProgressBar = null;

  }

  function loading(evt:ProgressEvent):void {}

  var loaded: number = evt.bytesLoaded / evt.bytesTotal;

  setBarProgress (loaded);

  }

  function setBarProgress(value:Number) {}

  progressbar.bar.scaleX = value;

  }

• How to set the camera flashlight so that it does not turn from that photo

  I am creating a flash light application. I try this with Caméra Libraray. But I can't seem to do the flash light linger once the photo is taken. He died right after the photo is taken. I used this command

   camera_config_flash(handle,CAMERA_FLASH_ON);
  

  to force flash light whenever the photo is taken. I have to try this while capturing a video instead? But I also can't seem to start the video.

  err = camera_start_video(handle,"/accounts/1000/appdata/com.example.Camera.testDev_ple_Camerab032c86f/data/video", NULL,NULL,NULL);
  

  the variable "err" returns a value of error of 2. This problem gives me a headache. I really need help to solve this problem as soon as I can. Thank you.

  Check this sample to github

  https://github.com/BlackBerry/Cascades-samples/BLOB/master/SensorDemo/src/flashlight.cpp

• Version 6.0 of Windows Mail in Windows Vista does not all emails that hit the server.

  Hello

  I use Windows mail, version 6.0.6000.16386. for Microsoft Vista.

  It seems tht that not every email will make it through Windows mail. I checked with my internet provider and we can see the e-mails hit the server, but it was as if Windows mail has been picking up a choice than to receive mails.

  When we access the server directly, it seems to work. Anyone can help?

  Thank you.

  Simply select the account under Tools | Accounts | Mail, then click on remove.  You will need to know the parameters to set it up again.  McAfee is known to cause problems with Windows Mail.  You will not be able to correct them if you continue to use McAfee.  Alternatively, you can try to compact and repair the database of WinMail to see if that helps (see www.oehelp.com/WMUtil/).

  Steve

• HO FOR LAPTOP 15 AC 122TU: MY LAPTOP DOES NOT RECOGNIZE MY PHONE USING THE USB CABLE.

  I bought laptop 3 months ago. Her works are properly that day there at far but these last days, it can't recognize my phone using data cable which works properly before this question.

  How can I solve this problem.

  

  Try another port.

  Normally, mobile phones are recognized as storage devices when you connect them.

  It is not necessary to install the software of the phone.

• my laptop does not start and gives me the error, load the required DLLs for kernal

  When I went to start my computer would not start and just says load needed DLLs for kernal and communicate with my support. I don't know what the problem is or how to fix it. It was working fine when I finally stopped him. any help is greatly appreciated

  Hello

  Method 1: Please follow the steps mentioned in the article mentioned below:
  Error Messages When you start your computer if Program Files of Windows are missing or damaged:
  http://support.Microsoft.com/kb/812450

  Method 2: How to perform an upgrade on the spot (reinstallation) of Windows XP:
  http://support.Microsoft.com/kb/978788
  Note: This could result in a loss of data on your computer; It is recommended that you back up all important data on the computer before performing this operation.

• camera does not turn on

  I tried to load camera after death, it does not at all, but the orange light is on when it is plugged, let it charge all night and still it won't turn. I videos I would like back, please help.

  The charge indicator lights orange when the charging starts. It seems that the battery is charged. Try to turn on the camera while loading and check if it is turn on.

  Note: The charging light turns off, charging is completed.

  If the camera does not turn ON even when the load is in progress, the service is required.

  You can initiate the service from the link below:

  https://eService.Sony.com/

  You can also contact our telephone support or Chat to try additional troubleshooting procedures.

  http://eSupport.Sony.com/us/p/select-System.pl?Director=contact

  Please provide model # exact camera while contacting support, so that they provide accurate information. You can locate model # on the back panel and it will start with the letters MHS.

  If my post answered your question, please mark it as "acceptable Solution".

• L50D-B-146 satellite does not turn

  Hello

  I have a problem with my L50D-B-146 turns is not on. Very rarely, when I try to turn it on it works. Once I managed to turn on I tried to upgrade the Bios to 1.6 1.2, but you must restart your computer to complete the installation I couldn't because it does not turn on 99% of the time. The laptop didn't work before I tried upgrading the Bios is not the fault of the installation to fail. Also when I get to turn Windows works perfectly fine, until I have to turn it off again.

  When I try to turn it on the power button light works and you can hear the fan, otherwise you may not even see the screen Toshiba Leading Innovation, so I don't think it's the fault of the window. I repeat again once you can activate from time to time, but very rarely. Also it is not the fault of the monitor that I connected the laptop to an external display, and again, there was a problem.

  I would be very grateful for any solution to this problem

  The solution to this problem?
  I don't know if anyone here can offer virtual diagnosis and offer the working solution.
  When the machine works sometimes such a problem is not easy to understand. Such behavior of the laptop must be analyzed and may be tested with diagnostic tools.

  What we do here, it's just to speculate at what may be the problem. Looks like the BIOS related issue. For some reason, from time to time your machine cannot pass the BIOS checking the material.

  Have you already contacted Toshiba services and asked for help?