Buzz.js: How its set of nested symbols?

Similar Questions

• How to set the keyboard symbols

  Hello
  can someone tell me how I can get the questionmark next to the shift key, and also for the eurosign with the Shift key
  the euro symbol is normally the 5 key

  Hello

  Have unfortunately no solution for you, but on this forum I found an interesting discussion on the similar theme.

  If you want you can check it out on http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=1474&messageID=3440#3440

  Good bye

• Question of nested symbol

  I'm sure this has already been answered. I could not find.

  I have a symbol that contain the other three symbols in it. I have put on the main symbol of the action and want to access the nested symbols and I couldn't understand it.

  mainSymbol

  childSymbol_01

  childSymbol_02

  childSymbol_03

  My code works fine on the main symbol:

  TweenMax.to (sym.$("mainSymbol"), 1, {css: {opacity: 0}, ease:Expo.easeOut});})

  How to access the nested symbol

  I tried without success:

  / TweenMax.to (sym. $(getSymbol ("childSymbol_01")), 1, {css: {opacity: 0}, ease:Expo.easeOut});})

  That has not worked, but your response that I saw that I do not use the "$" for the child.

  Here's what I did:

  var myVar = sym.getSymbol("parent_Symbol").$("child_Symbol")

  TweenMax.to (myVar, 0, {css: {opacity: 0}, ease:Expo.easeOut});})

  It works fine and I can access the child using myVar.

• A DBA how to set permissions so that its users can submit to its form but do not have to execute queries or touch the database?

  Original title: InfoPath/SQL

  I am familiar with InfoPath, but I'm a DBA to a database on SQL server. The person created the infopath form and there users who can submit to the form, however, the only ones who can submit to the form are those who have access to SQL. A DBA how to set permissions so that its users can submit to its form, but do not have access to run queries or press my database. Thank you

  Ask the question in the SQL Server forums:
  http://social.msdn.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer

• How to target a trigger to a nested symbol scene

  How to target a trigger to a nested symbol scene.

  Seems that your problem is on board animate. If so, please ask your question at http://forums.adobe.com/community/edge_animate

  Animated border CC This forum is specially for the edge questions inspect.

• How to set up an account for another user of my PC (Windows Vista) and give its right of administrator to download the program

  My daughter helped me to set up an account to my own PC with password protection. Please indicate how to set up another account for someone and give it the administrator right to download the program.

  There is information about the configuration of the accounts here:

  http://Windows.Microsoft.com/en-us/Windows-Vista/demo-understanding-user-accounts

• How to set Photoshop size chart (a background scene) to adapt to the work of the Illustrator without changing its quality

  Dear Photoshop pros,

  I recently worked on a project that requires both photoshop and illustrator. However, here's a problem, my artboard illustrator file is 12 x 16 in because I can resize the work at any time, but photoshop graphic (background) that I created was too small to intensify, and it will fade and blur with tiles of pixel being considered. I realized that I don't know how to configure the size of the background in photoshop in order to make evolutionary or more if I intend to use it as a background in illustrator.

  You'd like to share with me how you set up the size of your work in photoshop to fit in an Illustrator file with 12 x 16 in the artboard.

  Thank you very much in advance for your kindly advice!

  Masako

  If you follow my sizes PS - 12 x 12 ins at 300 PPI, (3600 x 3600 px), which should be large enough for most cases.

  You can find this useful tutorial: https://m.youtube.com/watch?v=eBLg0SDb2kk

• How can set resolution screen on firefox, I know zoom in and out, but I want to upgrade my browser to my upgrade zoom

  Hello
  How can set my screen resolution of firefox (I know zom in and outside zom, but when I restart my firefox it chanaged to perviose zoom level)

  Hello

  Firefox on Windows is now after display, scaling options that can make the biggest text on screens at high resolution. There are several ways to solve this problem. See the Web pages are broad and fuzzy after update of Firefox - how to fix article for a suggestion. Here is another possible solution:

  • Type of topic: config in the Firefox address bar and hit the Enter key.
  • If the warning that this might void your warranty , click I'll be careful, I promised.
  • Search for layout.css.devPixelsPerPx

  

  • Double-click layout.css.devPixelsPerPx to edit its value. The default value is - 1.0 in Firefox 22 and above. Change it to 1.0 to run as in previous versions of Firefox.

  If necessary, further adjust the value of 0.1 or 0.05. Values between 1.0 and around 0.5 to reduce the size of the elements. Use a value greater than 1.0 to increase the size. For example, a value of 1.25 will increase the font size of the 125% to account for the default DPI setting in Windows 8. Check the value that you enter. Definition of a value that is too small will take everything away and too high will explode things.

  If the web pages should always be adjusted so you can watch the extension Default FullZoom Level or NoSquint .

  To adjust the font size for the user interface, you can use the extension of theme font & size changer .

  This solve your problems? Please report to us!

  Thank you.

• How to set the path of the report in a plugin for model

  I'm trying to figure out how to set the path of the report in a plugin process model. I can't find a way to have access to it. It seems this would be a reasonable thing to do since the plug-ins are for the treatment of the results. Does anyone know how to do this? We generally use the sequential process model, but I try to keep my plug-in as independent as possible.

  Thank you.

  If I understand correctly, you want your plug-in, when enabled, change the settings of all other instances of the report OR plugin as their reports share the same directory that your plug-in is configured to use.

  If so, your plug-in can access and change the settings of all other instances of plugin. All instances are passed to all the points of plugin entries in the subproperty of the plugins of the ModelConfiguration parameter table. You can browse this table. Any element of the array with an equal to "NI_ReportGenerator.seq" Base.SequenceFilename is an instance of the report OR plugin. Its report options are stored in the element under PluginSpecific.Options.

  You can change the report options to what you want. Note that the recall of the ReportOptions model is called from template-plugin Initialize entry point, then you might want to ensure that your changes are applied after that, so they are not replaced. To do this, you could make your changes in the Initialize entry point of your plugin and make sure your plugin runs last. To rotate the last, you can set the FileGlobals.ModelPluginComponentDescription.Default.Base.RunOrder in your file of plug-in with a value greater than 0, for example 1.0 (see Help for TestStand > Fundamentals > process template Architecture > plug-in for the model process Architecture > Structure of the plugin sequence files > plugin model of entry Points > Order Execution of Point of entry at run time).

• How-to: set up another user to connect separately

  How to set up another user to open a session on their desktop separately from myself?  Is it not logical to have more than one user name on a PC when there is more than one user?

  How to set up another user to open a session on their desktop separately from myself?  Is it not logical to have more than one user name on a PC when there is more than one user?

  In general, for the purposes of personal confidentiality, each user has access to his user account and so own name username and password which will be known only to this particular user.

  Which means... every user will log on access to his own office with access to its own username and password.

  Based on this principle, Yes, it is quite logical.

  In addition, the general tule of thumb is that, there is an account administrator accessible only to the administrator.
  The rest of the accounts are standard accounts that do not have administrator privileges.
  For preventive measures, it is also wise to have 2 Administrator accounts. One will be a "backup" for an emergency so that if an admin fails to connect, there is another to retreat.

  I guess you don't know how to create user accounts. Yes?
  If not, please after return.

• How to set the zoom settings menu for lecroywaverunner 6050A

  Hello

  I am trying to initialize the zoom settings of a track of the labview on a Lecroy WaveRunner 6050 A fft. I found how to set the parameters of the fft with the manual of the remote control for LeCroy scopes  http://cdn.lecroy.com/files/manuals/wm-rcm-e_rev_d.pdf ) but I have not found how to set the menu zoom settings.

  I also tried with find command using the command of automation of Lecroy. ( http://cdn.lecroy.com/files/manuals/automation_command_ref_manual_wr.pdf ). but I think that there is a problem with the settings of the commands I send to the scope.

  I just need to put the horizontal and vertical centers and scales.

  If anyone can help,

  Thank you.

  Hello

  I use F1 as my FFT here track.

  Commands to change the scales are:

  Vertical Center: VBS ' app. Math.F1.Zoom.VerCenter = XXXX"

  Portrait/div scale: VBS ' app. Math.F1.Zoom.VerScale = XXXX"

  Horizontal at the Center: VBS ' app. Math.F1.Zoom.HorCenter = XXXX"

  Horzontal scale/div: VBS ' app. Math.F1.Zoom.HorScale = XXXX"

  I also want to point you to an application on the scope that will help you.

  If you go to the file menu and select cut, to the office, there is a shortcut to an application called "XStream Browser"

  The browser is an interactive application that will present all automation methods and properties that are available on the scope.  He acually connects to the scope of the request, so you can use it to test various components to see what they do on the scope.  It is very intuitive and I use it exclusively. (this is where I went looking for the commands above for you).

  Here is a link to Chapter 1 of the manual of automation: http://cdn.lecroy.com/files/manuals/04_xstreamautomation_ch1.pdf

  Page 1 - 5 has a quick introduction to the browser and its use.

  I hope that it becomes operational.

  Kind regards

  Leonard Brown

  LeCroy sales engineer

  1-800-5LeCroy

• How to set up Windows Mail with username and password. Error: 0x800CCC67

  How do you get the Window Mailer program to send emails after selecting the tab allow; provide the subject the text fields with his concerns, and then select the tab send. only to be routed to the dialog of POP3 asking "user name and pass word" not knowing what the old man and or (how to) a username and/or password?  The last error message I received contained the 0x800CCC67 error number. I currently have 15 messages waiting to be sent, 14 of them are since and worms, tries to send to different ententies.

  Original title: Mailer Windows has not worked for me yet. whenever I get an error message in the program of POP3 and the last error number is 0x800CCC67. In addition, how its "username and password" if we had a time or needs to be reset?

  Before you can configure an e-mail account, you must call your ISP or your e-mail server.
  You need the following:

  E-mail address
  Username
  Password
  Name of the incoming server
  The name of the outgoing server

  Also ask them if they can either teach you how to configure an e-mail account, or if they have a website where he shows how to do.

  Assuming you use Windows Mail, snce you wrote 'Mailer Windows', here's a tutorial:

  Windows Mail: setting up upan account from beginning to end
  http://Windows.Microsoft.com/en-CA/Windows-Vista/Windows-mail-setting-up-an-account-from-start-to-finish For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• How to set an IP address manually and manual DNS servers for my printer HP Photosmart 7525?

  Cannot print.  EU of evil when the printer was initially put in place.  "Happytohelp01" Assstance solved the advised me; a manual IP address unBalayage DNS servers for the printer.  I did not write the information and now my printer is not working (it only worked for about a month), now nada.  I've had at the start of the connection to the web server problems - now its doing the same thing, but I don't know what IP Address and DNS to use.  Please help if you can.

  Hi @LaceyNo1,

  Welcome to the HP Forums!

  I understand that you are wondering, how to set an IP address manually and manual DNS servers for your printer HP Photosmart 7525. I am pleased to see that for you!

  After some research, I think I found the post, my colleague @happytohelp01, helped you with. In this post, Re: Photosmart 7525.

  Hope this is what you are looking for and have a good day!

• How to set up the Office remotely between two pc in different countries

  Hi, I just want to know how to use Remote Desktop between PC Windows 7 in different countries...

  I just tried Windows remote assistance but it take too long to set up first help me post the invitation file and the key to past and then I download the file and open it with Windows Remote Assistance and then copy the access code and enter it in the text box vacuum... and blablablabla

  I have seen a lot of video on how to set up remote desktop for always as when I want to use remote desktop, just ask the user on the other computer and connect it
  How can I do
  Thank you

  * and what is Remote Desktop connection software in windows 7? (next to the Windows Remote Assistance) 

  
  
  looking for help

  First of all know what version of Windows 7 is running on the computer you want to access remote/control. Go to the Start button and type winver in the search window. Windows will report to the version in a pop-up window on your desktop.

  ***********************************

  Assuming that the computer is running Windows 7 Ultimate or Pro...

  The main steps are...

  • Activate [DRC] Remote Desktop on Windows 7 Ultimate DRC PC host.
  • If the login ID DRC on the Windows 7 Ultimate DRC host PC is not an administrator, and then add the user to the remote desktop users group. Don't forget the DRC connection user ID are local on the host Windows 7 Ultimate DRC PC not the DRC PC client.
  • Make sure that there is an exception in the Windows Firewall, or any third-party firewall on the Windows 7 Ultimate DRC host PC.
  • If the host Windows 7 Ultimate DRC PC is behind a router make sure that TCP Port 3389 is transferred to the LAN IP (static is preferable) of Windows 7 Ultimate DRC host PC.

  You can test TCP Port 3389 port through your router forwarding by going to the http://www.canyouseeme.org test site. For help setting up through any router port forwarding, go to the PortForward.com site for help. Ignore references to UDP Port 3389.

  http://PortForward.com/English/applications/port_forwarding/Remote_Desktop/Remote_Desktopindex.htm

  Test call Windows 7 Ultimate DRC host PC from another PC or laptop computer on your local network using its LAN IP address (static is preferable).

  http://theillustratednetwork.MVPs.org/RemoteDesktop/TroubleshootingDiagrams/Basic.html

  To call from a remote location using the public IP address of the router to the PC host of Windows 7 Ultimate DRC is behind or a full domain name [FQDN] of DynDNS (which I assume that you have already configured).

  Its highly recommended that you use Network Level Authentication [KLA] If you connect remotely from a Windows 7, Vista or XP SP3/SP2 client.

  http://Windows.Microsoft.com/en-us/Windows7/what-types-of-Remote-Desktop-connections-should-I-allow

  http://theillustratednetwork.MVPs.org/RemoteDesktop/RDP6ConfigRecommendations.html#SP3

  http://theillustratednetwork.MVPs.org/screenshots/RDC-NLAandServerAuth/host-UseNLA.jpg

  http://theillustratednetwork.MVPs.org/screenshots/RDC-NLAandServerAuth/ClienttoServer-UseServerAuth.jpg

  Make sure that you use the latest version of the client if your connection from a client computer to Vista or XP SP3/SP2. Windows 7 includes the new RDC client software.

  http://support.Microsoft.com/kb/969084

  General help written for Vista, but close enough to Win 7...

  http://theillustratednetwork.MVPs.org/RemoteDesktop/RDP6ConfigRecommendations.html

  MSFT Win 7 DRC help pages...

  http://Windows.Microsoft.com/en-us/Windows7/allow-someone-to-connect-to-your-computer-using-Remote-Desktop-connection

  http://Windows.Microsoft.com/en-us/Windows7/connect-to-another-computer-using-Remote-Desktop-connection

  http://Windows.Microsoft.com/en-us/Windows7/allow-remote-desktop-connections-from-outside-your-home-network

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-using-Remote-Desktop-connection

  http://Windows.Microsoft.com/en-us/Windows7/search?q=remote+desktop&PRD=Windows7

  ***************************************

  If the remote computer runs Windows 7 Home Premium...

  Windows Live Mesh 2011 remote connections works well for the access/remote control of a computer Windows 7 Home Premium. It gives you a nice Remote Desktop display type of the Office from remote computers.

  http://explore.live.com/Windows-Live-2011-system-requirements

  You can use a web browser to access without installing any software, other than an ActiveX control, on the remote client or install Live Mesh on the client. Your choice.

  http://explore.live.com/Windows-Live-Mesh-Remote-Desktop-using?OS=Mac

  http://explore.live.com/Windows-Live-mesh-devices-remote-connections-what-UI

  If you use Live Mesh Remote Connections I suggest to create a Live ID limited account type that does not include an e-mail account. I have install a limited Live ID I use only to connect to some Live Mesh remote connections to computers I want / access control.

  https://accountservices.passport.NET/ppnetworkhome.SRF?VV=1200&mkt=en-us&LC=1033

  You can, if you wish, also use an existing Live ID or create a new, but this is your choice.

  I installed Live Mesh 2011 on desktop Win 7 Home Premium to my wife and in distance/access control can it go literally anywhere. Sometimes I use the web based (IE. Method ActiveX) from my laptop on the desk.

  Here is an example of a session Windows Live Mesh 2011 remote connections on my laptop computer for access to the / remote control of desktop Win 7 Home Premium to my wife.

  https://SkyDrive.live.com/redir.aspx?CID=25ab668da65c8fbe&RESID=25AB668DA65C8FBE! 402 & Thierry = 25AB668DA65C8FBE! 118

  https://SkyDrive.live.com/redir.aspx?CID=25ab668da65c8fbe&RESID=25AB668DA65C8FBE! 401 & Thierry = 25AB668DA65C8FBE! 118

  Otherwise if you want to remotely control a computer looking Windows Home Edition to TeamViewer (free for personal use) or VNC (my favorite is UltraVNC with its encryption plugin) as the other two alternatives.

• How to set up a connection using a Toshiba Satellite C655D-S5508 mobile access point?

  How to set up a connection using a Toshiba Satellite C655D-S5508 mobile access point? I am trying to connect a Samsung Galaxy stellar and receive an error page indicating that the DNS search failed. I do not know how to set up my computer, I have the wireless power and know how to connect to the hotspot from the phone. The phone is able to recognize the computer and its IP address, and the computer recognizes the phone and tries to connect but then displays the error message "DNS search failed.

  Any help would be great!
  Raquel

  Hi Raquel,.

  Do you have any security program installed on the computer?

  I suggest to go through the steps from the link provided and check if it helps.

  Add a Bluetooth device or other wireless or network device: frequently asked questions

  http://Windows.Microsoft.com/is-is/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

  You can also consult the manual of the computer for the same and check.

  If the problem persists, you can also contact manufacturing for known problems:

  Support.Toshiba.com

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Hope this helps and let us know if you need more assistance.