By automatically searching for 'disabled' icon on IconButton possible?

Similar Questions

• When I type a letter (not when text entries are selected; i.e. for navigation not writing) the browser will automatically search for the letter.

  I use letter keys to navigate often, but recently everytime I try, the browser automatically will pop up 'Find in page' and look for him.

  Have you checked the setting in "Options/Preferences > advanced > general" (topic: preferences #advanced)?

  • Accessibility: "search for text when I start typing.

• Automatically search for colors

  Hi all

  In a project, I have to check if the colors in a cable are OK.

  When they start production systems must be in learning mode, and my problem is here.

  Fix you can see an example of component snap. Does anyone have a nice idea to automatically see the presence of a red and a yellow part?

  After that, I think it s easy, I'll put the parts found in a model and I will do a color segmentation to test the rest of the production.

  Thanks in advance, best regards,.

  Paulo carmo

  Hello Carmo,

  Could you please tell us what software you use? One idea I have is that you use for example edge detection.

  Concerning

• How auto search for fotos duplicate within an event

  When I down load pictures from different sources on my iMac, there are opportunities to double, but the pictures do not appear next to each other, as the dates of these photos are not the same; so in a file large, they could be anywhere. I don't know there is a way to automatically search for duplicates by using images rather than dates, etc.?

  iPhoto has no tools to detect duplicates.

  Try third-party applications to find duplicates:

  • Duplicate Annihilator
  • iPhoto Library Manager
  • Sweeper duplicate

  are known to be safe to use with iPhoto.

• Spikes of huge ping because the computer automatically search nearby wifi networks

  For the past two years now, I had huge ping spikes every 2-3 minutes and is two months ago I wanted to solve the problem. I looked at the issue and of course I found people with the same problem and even provide tools to resolve. The problem is that my laptop is automatically search for nearby wifi networks, causing of the huge ping spikes, as seen here. The tool had stopped my computer from searching nearby wifis, it worked for about a week before I began to experience ping spikes again, the program had suddenly stopped working (I reinstalled it several times). then I looked at once more the question and found another tool. Parasol, it stopped working as well and I have no idea why. I tried to reinstall both programs, restart several things to look for other alternatives to google, but I found nothing. If anyone knows how to solve this problem, I would be very happy!

  Running windows 7, btw.

  Hello

  There is a particular configuration for cards wireless called roaming aggressiveness that indicates the rate at which the wireless client automatically selects and switches to another wireless with a better signal quality. This can be checked on the advanced settings of the driver for your wireless card.

  To get help on the configuration of roaming aggressiveness, we suggest that you contact the manufacturer of the device. You can check this link to find the addresses of the OEM.

  Kind regards.

• The search for Clob columns in interactive report

  I use APEX 3.2 with 10g. I have an interactive report with a query that takes several recordings of 'comments' and the concatenates using a function that returns a Clob. In the report, there are several of these comments columns mixed with some small varchar2 columns.
  
  Using the search bar, if I type in a Word and click OK, it does not seek my Clob columns. On the other hand, I can use the drop-down list in the search bar to indicate I want to only search one of these Clob columns, then the research works.
  
  Is there a reason that my filters 'Text line contains' do not include my Clob columns? I have defined, as the "Standard report column" and they all "filter" checked as a permitted operation.
  
  Greg

  I found a work around for this problem. IR reports do not seem to automatically search for CLOB columns as a search ROWTEXT (unless you are specifically targeting this column). So, I wrapped the CLOB column with:

  DBMS_LOB.substr(clob_column_name,4000,1)

  This converts the CLOB Varchar2 column, which made the report «see» IR Of course, this only works if you want to search for the first 4000 bytes, but the data in my CLOB columns are never more than a few sentences long.

• Icon that automatic update is disabled

  I have a small icon that says automatic update is disabled. Click on it to turn it on, it says cannot turns a from here go to the control panel. To the comtrol Panel it says its on. Happened earlier, had to do a complete reinstall OS. Any body know an easier way? Windows XP with a great anti virus and Kapersky.

  Hello

  1. what version of service pack for Windows XP is installed on the computer?

  If it's Windows XP Service Pack 2, you can follow the suggested procedure.

  I suggest you try the procedure described in the link and check if this is useful:

  You can not turn on automatic updates on a Windows XP Service Pack 2 computer

  http://support.Microsoft.com/kb/916261

  Note: I suggest you run any antivirus at the same time, running two antivirus at the same time will conflict supremacy right from the time the antivirus.

  I hope this helps.

• Disable the automatic search

  I edited on: config and changed "keyword.enabled' to 'false', but it's still an automatic search of Google at the boring address when I type in the address bar.

  Windows Firefox 27.0.1 8.1

  Try going to Subject: config, search for browser.urlbar.autocomplete.enabled change to false

  • Subject: config

• Disable the search for news in the Iphone

  Is there a way to disable the news listing in the iOS which appears when you enter the menu to search for your iphone? (forgive me if my terminology is inaccurate: I am referring in the menu that appears when you slide the screen down, or move to the screen on the left in the iphone) Currently, there is only the possibility to disable the 'News' application, but I'm not aware of any possibility to remove new research in the search menu.

  Thank you

  Hello

  I also had this issue. After some googling I discovered the solution: go to settings > general > Spotlight search. A huge list of apps is listed here under "Search results" and new is one of them. You can press the switch to turn it off.

  I hope this works for you and answer your question!

• How can I disable search for it invdexing?

  How can I disable search for it invdexing?

  Click on Start - Control Panel (and select Classic view in the left pane), select Administrative Tools , then Services. Scroll down for Search of Windows, do a right click, choose Properties.

  The value of starting off. Click on stop.

• Set the default search for 6.0 engine.

  He continues to show upward with the Firefox search engine. I did search engines to manage and he refuses to stay the same. I don't want Firefox as my default search engine. I even remove the Firefox search engine and it is just when I restart.

  I have searched and tried several things including this suggestion of config and nothing works.

  To be clear, it is for the search engine in the bar, NOT the search home page.

  I found this thread while searching for the solution to the same problem. It seems to be part of the test pilot program that runs automatically to people who are on the beta version of Firefox. I fixed the problem by going into my Add-ons and looking at the extensions. There should be one called with something on a study of usefulness of search results. If you disable or remove this extension, the option to "Search the Web" firefox will disappear for good.

• Why do I get an error when I try to search for Windows updates?

  When I try to search for windows updates I get ERROR Code C002001B.

  Windows app troubleshooting doesn't help.

  I am currently running Windows 7 Home Premium x 64

  Hello
  Thank you for visiting the Windows Vista community.

  Please follow these steps:

  Method 1: Install the malicious software removal tool

  Install the malicious software removal tool. After you install the tool, restart the computer. The tool runs automatically.

  For the latest version of this tool, visit the Windows Update Web site or the Microsoft Update Web site. For more information about this tool, click on the number below to view the article in the Microsoft Knowledge Base:

  890830 (http://support.microsoft.com/kb/890830/) the malicious software removal tool Microsoft Windows help you remove specific malicious software and present on computers that run Windows Server 2003, Windows XP, or Windows 2000

  Method 2: Use software to fight against spyware and antivirus software to scan the computer

  Use the software to combat spyware and antivirus software to scan the computer. Low cost and trials of versions of this software is generally available on the Internet.

  Method 3: Install the update mode safe

  Install the update in Mode without failure. To do this, follow these steps:

  1. Download the update. To do this, follow these steps:

  a. visit the Microsoft Download Web site:

  http://www.Microsoft.com/downloads (http://www.microsoft.com/downloads)

  In the search for a download box, type the article number of the Knowledge Base that describes

  the update and then click go .

  b. download the update and then save it on the desktop.

  1. Install the update. To do this, follow these steps:

  .          Double-click the downloaded file to install it.

  If you are prompted to restart the computer, do so.

  1. 1. Visit the Windows Update or Microsoft Update Web site to check if the update is offered again. If you are offered the update again, proceed to the next step.
  2. Install the update in Mode without failure. Safe mode disables most of the processes and services running. These services include the Windows Update service. Installation of an update in Mode safe is a quick test to check if an application or process interferes with the installation. To install mode safe mode, follow these steps:

  .          Restart the computer.

  1. 1. The computer starts, press the F8 key.
     2. Use the arrows to select Safe Mode , and then press ENTER.
     3. Double-click the file that you downloaded in step 1 to install the file.
     4. Once the installation is complete, restart the computer.
     5. Visit the Windows Update or Microsoft Update Web site to check if the update is offered. Otherwise, wait until automatic updates runs again.

  Follow the steps in the below link:

  http://support.Microsoft.com/kb/910339

  Kind regards
  

  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Automatic update is disabled

  I have win Vista. The automatic update is disabled. I have run services and change the service to start automatically and accepted... but I reboot machine tha... .service disable automatic, new update

  Thank you

  Hi Npereira,

  This can occur if your computer is infected or even when the windows update service is damaged for some reason any. Let us try the following steps.

  Step 1

  Reset windows update components. Open the link given below and click the fix button, which will automatically reset the windows components update.
  http://support.Microsoft.com/kb/971058

  Step 2

  If the problem persists even after the virus scan so you can check if the background intelligence service is started.

  1. click on Start, type services.msc in the start search box and press ENTER.

  2. double-click on Background Intelligent Transfer Service.

  3. in the Startup type , click Manual, and then click apply.

  Start the windows update service, and then restart the computer and check if the problem persists.

  Reference: http://support.microsoft.com/kb/959894

  The result of the POST back .

  Bindu S -Microsoft Support
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• How can I search to search for images with only 2 specific people?

  I have a lot of photos the tag with a lot of peoples names and other keywords.

  I also have many people tag with the face detection feature.

  I want to see pictures that don't have 2 specific people in them, anyone else included.

  I expect Ctrl-click on a few faces and he let me to raise only pictures with those two, no chance.

  I was hoping to enter key words somehow, no luck.

  There has got to be possible, hoping someone can help me get there faster...

  Appreciate the help!

  I want to see the pictures that have included ONLY 2 specific people in them, nobody else.

  It is conceptually simple, but somewhat tedious: first of all, you will find all the photos that have at least 2 people, then you exclude those photos that have other peoples.  It will be much easier if you have all of those organized hierarchically under a parent keyword, for example people.

  1. in the catalogue on the left panel, make a right click of the quick Collection and make clear quick Collection.

  2. click on all photographs.

  3. in the library filter bar, open the metadata browser and configure it to have two columns of keyword.

  4. in the first column, select the keyword in the first person and in the second column, select the second person. This will show the pictures that have at least two keywords, but they can include photos that also have other keywords of people too.

  5. do not change > all select and make Photo > add to quick Collection.

  6. in the catalog Panel, click the quick Collection.

  7. in the library filter metadata browser, delete a keyword column.

  8. in the remaining key word column, if you have intermediate keywords with your keywords of individuals, expand each of them.  For example if you have people > family, people > friends, people > colleagues, etc all expand them to all the keywords of the sheet are show.

  9. Select all the keywords people clicking on the first and then shift-click on the last.

  10 deselect any intermediate parent keyword (e.g. people > family) by Cmd/Ctrl-clicking them.   Deselect the people themselves.

  11. deselect keywords two sheets on the two people.  At this point, you should have all of the keywords selected sheet people except for the key words of two people and no intermediate grouping selected keywords.   Pictures showing are those containing the two desired keywords and at least another keyword of people.

  12. do not change > all select and make Photo > remove from quick Collection.

  13 disable filters by clicking None in the library filter bar.

  Quick Collection now contains these photos that contain the desired keywords of two people and no other keywords of people.

  If you do a lot, you can use any filter plugin to predefine a search that automates this for you.  Set this research would be a bit difficult, so if you want to go this route, send me a private message and I'll take you through it.

• Can I search for a word in the description of a bookmark?

  When I add a bookmark, I often add a description.
  Another reason why a lot of my favorites are the descriptions is that I am an old user of delicious and I imported these bookmarks in Firefox.
  So I would like to search for words that I wrote in the description, because the description is often more significant than the label, the name or the URL.
  But unfortunately Firefox does not resemble the description during the search in bookmarks.
  Nor find any extension.

  A backup of bookmarks HTML includes descriptions, so you could open such a backup in a tab and use the search bar to search the page.

  You can make Firefox create an automatic HTML (bookmarks.html) backup when you exit Firefox, if you set the pref to true on the subject browser.bookmarks.autoExportHTML: config page.

  • http://KB.mozillazine.org/browser.bookmarks.autoExportHTML

  This backup is created by default in the profile as bookmarks.html folder whenever you close Firefox, but you can set the file name and the path through the pref browser.bookmarks.file on the topic: config page.

  • http://KB.mozillazine.org/browser.bookmarks.file

  The pref browser.bookmarks.file does not exist by default and you must create a new pref to string with the name browser.bookmarks.file and set the value to the full path of the file backup bookmarks including the name of the file.