By comparing the differences files

Similar Questions

• How can I compare the differences between two files After Effects?

  I have a major problem.  I was working on special effects for a film.  In After Effects, when I change siggificant, I often have to register under and create a new name so I can go back to the old work if necessary.  It comes in a case, I have come back from earlier works.  If I use these two files After Effects allows you to create multiple clips of effects.  And I do not remember just where you look at it, it is better.  Does anyone know a good way to compare the differences between the files?

  One thing to keep this conversation on the right way: I know that I did a stupid thing.  I've never done this before so can we please not spend a lot of time on how to avoid this problem and stick to how we solve this problem?

  If you encounter difficulties to identify differences in the old and new versions, you can use this procedure:

  To avoid confusion, I'll call your former company and your most recent compositions CompB comps.

  CompA drag "New Comp" icon in the project window.  This will create a new temporary layout that contains the nested CompA.

  Drag in your new COMP CompB temporary ensure it aligns image for image with CompA.

  Place the top layer (CompB) difference.

  Now, when you play through the comp, you'll see differences in color at a time where the comparison and CompB are not identical.

• Compare the binary file

  Hello

  I use LV 8.5.1. Would like to know, is there a method can compare 2 binary files? Same function as the following command prompt:

  FC /b 'file 1 path' "2 file path.

  First of all, do not consider using exec.vi system.

  Know your opinion.

  Thank you.

  What is the problem with the help of CF service? The alternative is to read each file in LabVIEW and do an equality comparison.

• problem comparing the 2 files reliable?

  Hi, I have to check two files if the contents of the two files are the same or not? The thing is the file is located on a server and when I download a second file I have to check if this file already exists on the server? If I have to download the second file on the server and check the contents of the two files there is a problem. the problem is if two files are identical, then download the second file is useless. so the approach I took was to compare the amounts of the two files but then sometimes the checksum is the same even when two content of the file is not the same so is possible to treat this situation with no probability of error.
  
  Published by: Denis on 11 March 2013 23:34

  >
  The only question is why it converts the hash in hexadecimal value? is it necessary?
  >
  Necessary? No - but the 'digest' method returns an array of bytes and outside Java which is not very useful.

          // get the hash value as byte array
          byte[] hash = algorithm.digest();
  

  The 'normal' use is to provide the digest as a hexadecimal string value. If you download files from the web, a lot of times they will provide a digest (MD5 or SHA1), you can use to check that the downloaded file was not damaged and that it is, in fact, the correct file. These sites provide the digest as a hexadecimal string value. That makes it easy to cut & paste in order to compare it with another value.

  In addition, copy the following code the 'calculateHashMessageDigest' method is declared to return a string

      public static String calculateHash(MessageDigest algorithm,
  

  With the digest as a hexadecimal string value makes it easier to manipulate.

• compare the text file to test the system

  Hi there everyone,

  can someone help me please.

  I have already created the Subvi.

  He already did what I wanted.

  It's the only way I know how.

  BUT...

  I need another way to do before having a new system. I'll have to change the code. I want to just edit a file text if possible. its easier to document rather than changing the code.

  Here's what I have...

  
  

• Comparing the differences in document?

  I Standard Adobe Acrobat DC and cannot compare documents.   Any help?

  Hello

  You do not have this option in Acrobat Standard.

  Please take a look on the following document.

  Plans and prices: compare plans | Adobe Acrobat DC

  Concerning

  Sukrit diallo

• Is there a good resource that compares the difference in performance between 2.7 GHz Intel vs. the 3.2 GHz?

  We run El Capitan and CC Adobe Creative Suite at work and need to cost justify a move.

  Any information would be appreciated.

  Thank you

  https://browser.primatelabs.com/Mac-benchmarks

• How to compare two files to see the differences in the content?

  How to compare two files (one word and a single pdf) to see if the files are identical without having read all 7 pages?

  Thank you

  You cannot compare files of different nature. If you convert the Word file to PDF, you can then compare the two files in Acrobat.

• compare the version control file

  I installed the SVN server and makes the controls of the version to work.

  I tried to compare the version 2 and Dreamweaver asks me to select application to compare 2 files of versions.

  Dreamweaver has any application versions to compare?

  If this isn't the case, then can you please advise any program to download to install to compare the 2 versions?

  Also, I just found out that Dreamweaver allows any user to use two controls version or check-in and check out.

  Is it true that Dreamweaver can only use one of them at the same time?

  Your information and help is much appreciated,

  Kind regards

  Iccsi,

  Is it true that Dreamweaver can only use one of them at the same time?

  Right.  If you use version control, you don't have another option.

  Dreamweaver has compare applications version?

  N °

  Do a Google search for FileMerge, BBEdit or TextWrangler.

  Check out comparison of the differences files:

  http://help.Adobe.com/en_US/Dreamweaver/CS/using/WSc78c5058ca073340dcda9110b1f693f21-7edda .html

  Nancy O.

• Do not click on old iPhoto library in Bridge CS5. It converts images of the .pkg file

  Hi fellow users. I'm using Snow Leopard 10.6.4 Adbobe CS5 Bridge and iPhoto 8.1.2.

  I have multiple iPhoto libraries stored in the folder my pictures. If I click on an iPhoto library somewhat current bridge, iPhoto lance and (according to the version of iPhoto package), displays the photo library in iPhoto.

  WARNING WARNING WARNING: Do not THROW OLD iPHOTO LIBRARIES FROM BRIDGE CS5

  If I click on an OLD deck of iPhoto from the bridge, he launched iPhoto but iPhoto doesn't display the library.

  What happens next is bad. Somehow the entire 'Images' folder is now considered by the dysfunctional finder as an iPhoto library or a "package". I had two happen.

  ---------

  The fix. From a finder window, you can right click on the photos icon and 'display the contents of the package. Drag the contents to a new folder. Remove the package of photos. If you wish, rename the new folder "Images". You may help iPhoto find your library again the next time that you open it. You will not be able to pass the package of photos to the Recycle Bin without loggin as user root (Apple can guide you through this).

  Good luck and be warned.

  -Go Steelers

  What happens next is bad. Somehow the entire 'Images' folder is now regarded by

  the dysfunctional finder as an iPhoto library or a "package". I had

  both occur.

  As I don't have a single iPhoto Library I can see the icon and when clicked

  It opens iPhoto forward.

  I don't have much experience with iPhoto and don't like the way you work

  with a library in a package hidden instead of a folder structure opened as

  Bridge of fact.

  Do not understand what you mean with the old library. If you rename the previous

  versions of the iPhoto library or do create you several libraries for different

  projects?

  Anyway, as Lao Tai already said, iPhoto library is a package and therefore

  not supposed to see photos in Bridge.

  Assuming that you have a back up of libraries you can replace without

  a lot of damage but you can first check if you can open the file

  See the contents of the package.

  In the Finder, select the file that you describe and right of the mouse and then click

  choose show package contents from the context menu.

  Do this also with your current library and place them side by side

  Compare the differences.

  The safest way to get your originals is in the same way, choose view

  content and find the "originals" folder

  Copy (if you are still able to use iPhoto, if for some reason any one)

  do) this content to the new folders in the finder (of course outside of the)

  the contents of the iPhoto library) and after doing so point bridge to

  These folders to use images in Bridge and Psalm

• The moving average of the data file

  Hello

  I'm doing a Subvi, which has jumps in the data points.

  The algorithm:

  -build an array of samples (of size round(FPS/2))

  -Take the average

  -subtract the data of the table of average points: = absolute difference (medium-sized data point).

  -compare the difference threshold: If difference > = point, then add 1 to the counter.

  The Subvi (jump detect) is intended to be used in a larger vi, and I need to make sure that it works. But it doesn't now.

  When the vi works and everything is calculated, it does not count the jumps that are visible on the ground.

  Any ideas what I am doing worng?

  Thank you

  The exsist problem in your loop in your Subvi. At this stage you are iterating FPS/2 size of the array, and you only show the last value of all of your calculations. Unless the last value is reported as a jump, it will not be saved. You can easily fix this by putting registers at offset on your loop for, the only question is do something with your Boolean indicator. You can index the Boolean values, and then make a chart or works, but this part is up to you.

  

• Class property node information not stored in the class file

  Hello

  did happen to you that you add a property (accessor get/set of an attribute) in a class node, Save the project, move the project to another location and it open and that the property node is missing in the project, although that the file VI is there in the file system? Unfortunately, it causes other screws using the property node is broken after moving the project to new place.

  The class file is some sort of XML and I checked: property node information is missing indeed, that seems to be lost when you save the project to the original location.

  Any idea?

  Peter

  Peter,

  If the content about the VI for the property URL is indeed missing in the file lvclass, it should not be a problem of relatively/absolute path.

  So what I want to know to clear:

  -PC 1 is used to develop the project, including the class (file lvclass and a few screws). You save the project using project explore everything back up?

  -Then you copy EVERYTHING used in the project manually to 2 PC (a unique project directory?).

  -Open the copy on the new machine shows the issue: the lvclass file does not include the entry for the node property accessor get/set screw option, but the screws are in the space provided (in the project folder).

  Is this correct?

  If so, the file lvclass on PC 1 contains about property nodes?

  If the parameter is there, please compare the original file and the copy of the timestamp and size. It seems that the lvclass file is not copied correctly.

  If the parameter is missing on 1 PC, the question must also be enabled on the developer's computer. When you try to save the lvclass file: it overwrites the file and create a new stamp/size for her?

  Otherwise, wait for the lvclass file to be write protected...

  Norbert

  EDIT: We're talking marked yellow question type, do we?

  

• new hard drive - what is the difference in performance between the new installation of Windows 7 or a clone of old hard drive?

  I get a new hard Hard Drive (SSD).  The new disc is the same size as my existing SATA drive.  I can do either a new

  the installation of Windows 7 or a clone old hard drive?  I would prefer to clone the old hard drive and keep all my settings, etc.   It's empirical data on the performance difference between a new installation of Windows 7 or to continue with the Windows 7 which was 3 or 4 years ago.

  I know the conventional wisdom is that the new installation is faster, but, no matter who actually tested and compared the differences?  I know I'll get better performance of the SSD the SATA drive, but I don't know if it's worth the hassle to do a fresh install and redo all my programs and settings.

  Others that the performance of the SSD you should not see any differences.  If you do, you can always do a clean installation later.

• get the difference in seconds to a time warp

  I need to find a way faster than:
  
  (
  To_date (to_char (TO_NUMBER (utc_date_new)), 'YYYYMMDDHH24MISS')-
  To_date (to_char (TO_NUMBER (utc_date_old)), 'YYYYMMDDHH24MISS')
  ) * 1440
  
  Thanks... ;(

  Hello

  Rusty75 wrote:
  Sorry, and Yes, his minutes (under a strain here)

  column has been defined as TIME_UTC VARCHAR2(14 BYTE) NOT NULL

  So basically it's a bad situation

  How heavy this weighing in a join will select the instruction?
  for example, left to join an intermediate table (200,000), with a huge table (40.000.000 rows)
  where is equal to staging.varchar indexed field huge varchar field table
  AND that calculated the difference > 5?

  See [when your query takes too Long | http://forums.oracle.com/forums/message.jspa?messageID=1812597#1812597] for what you must post to get advice on the setting.
  Are you saying that the part of the join condition which is the date of a table must be at least 5 minutes later at the time of the other table? In other words, you're doing something like:

  FROM          staging          s
  LEFT OUTER JOIN     huge_table     h     ON     h.txt     = s.txt
                                   AND     ( TO_DATE (s.utc_date_new, 'YYYYMMDDHH24MISS')
                                - TO_DATE (h.utc_date_old, 'YYYYMMDDHH24MISS')
                                ) * 1440 > 5
  

  If so, try to change the terms of join like this:

  FROM          staging          s
  LEFT OUTER JOIN     huge_table     h     ON     h.txt          = s.txt
                                   AND     h.utc_date_old  < s.utc_date_new
                                   AND     ( TO_DATE (s.utc_date_new, 'YYYYMMDDHH24MISS')
                                - TO_DATE (h.utc_date_old, 'YYYYMMDDHH24MISS')
                                ) > (5 / 1440)
  

  Even if the new condition (the other,

                                   AND     h.utc_date_old  < s.utc_date_new
  

  are covered by the third condition, it can leave a lot of matches be excluded without a conversion from VARCHAR2 to this DAY.
  Also, don't multiply each difference in 1440; Just compare the difference within days to a constant. I don't know if the optimizer is smart enough to do it for you, but why take the risk?

  would be to limit the calculation to: to_date (to_number (nw.time_utc), \'YYYYMMDDHH24MISS\')
  give a significant increase in speed?

  I think it's the opposite. The first TO_DATE argument must be a string; the above expression is to convert the string to a NUMBER (which takes a while), and while the NUMBER is implicitly converted to a VARCHAR2 (which takes more time).

• What is the difference (if any) between iPhoto and iPhoto library? I managed to delete my pictures in freeing up space, but have a backup available. Do I have to download these two files in the pictures folder is one duplicate of the other?

  What is the difference (if any) between iPhoto and iPhoto library? I managed to delete my pictures in freeing up space, but have a backup available. I need to restore these two files in the folder images or one is one duplicate of the other?

  I use a MacBook Air 2013 model with a backup on a WD MyBook Duo disc for storage wireless as the Apple Time Machine.

  The Photos and the iPhoto library are totally separated - neither one is connected to the other somehow--you want to restore the library you need

  LN