By default the red color (CMYK) looks pixelated on a black background

Similar Questions

• Color problems: the red color has disappeared from my computer

  Original title: color problems

  The red color has disappeared from my computer. The moniter is ok.

  Hello
   
  You did it changes on your machine before the problem?
   
  It could be a hardware failure.
   
  Things that can be loaded are listed below:
  
  broken monitor cable has...
  b. defective monitor.
  c. faulty graphics card.
   
  You can consider measurements:
   
  Step 1:
   
  Double check that monitor cable is firmly attached. Try the Wiggles, see if the color returns.
  Step 2:
  
  Test another monitor on the PC (Personal Computer), and/or the monitor on another PC.
  Step 3:
  
  You may have a bad cable, or the monitor may be defective.
   
  Step 4:
   
  Right-click on the desktop and select Properties. Go to the tab settings, and report on what choice was filed under 'Color quality' and what is the other choice in the drop-down list?
   
  If there is no choice of color quality better than what you have, you may not use the correct driver for your video card or monitor.
   
  Uninstall and reinstall the drivers for video card and see if the red color appears.
   
  Follow the steps in the link to uninstall and reinstall the video card drivers.
  http://www.Microsoft.com/windowsxp/using/Setup/support/driver.mspx
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• The red color does not print correctly. Have just replaced the Red cartridge and the problem remains

  HP Color LaserJet 2600n, Windows 7 64 bit

  The red color does not print correctly, it of a weak orange and turn yellow on the edges.

  The problem is, even if we just replaced the cartridge.

  The other colors are fine.

  I'm sorry.  It's a consumer forum and your printer is a product of the company; would be better served on the forum planned for it.  The business forum will be experienced in printers of business community members and expose the post more than members with the knowledge needed to answer.

  http://h30499.www3.HP.com/T5/printers-LaserJet/BD-p/BSC-413#.UDQAKt2PUaA

• Publisher 2007 when I save as PDF, the red color becomes grayscale.

  I created a document in Publisher 2007.  I used the font color to red and saved.  When I then its ved to PDF or XPS, red font converted to grayscale in PDF and XPS.  No idea how to solve this problem?

  Hello Rburla,

  Welcome to the Microsoft Answers Forum!

  I suggest to change the color of the text in the Pdf file by accessing the properties bar by pressing Ctrl + E and change the color of the text that is selected according to the needs and save the file and check if it helps.

  For more information about how to convert publisher to pdf files or xls files, please see the links below.

  Save a publication as a PDF or XPS file

  http://Office.Microsoft.com/en-us/Publisher/HA100649921033.aspx

  http://Office.Microsoft.com/en-us/Publisher/HA100643861033.aspx

  How to create a PDF file in Publisher

  http://support.Microsoft.com/default.aspx/KB/302835

  If the problem persists, you can post your question in the Microsoft Office community for best results. Please visit the link below to find a community that will provide the support you want.

  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Please get back to us if you have any other questions.

  Thanks and greetings
  Mir - Microsoft Answers Support Engineer
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads

• The best way to change the red color to white?

  Can someone tell me the best way to change the red part of the label in this image for white? I'm having a hard time understand this point and I know there must be a solution simple or semi-facile. I have about 10 of these I need to change. Thanks for the help!

  

  Hi Sheera730,

  Please take a look at the following article, it should be useful: https://blog.udemy.com/photoshop-replace-color/

  Kind regards

  Tanuj

• I don't see the red color on the computer screen.

  Red color went from my screen and seems to be replaced by black. GPU is a GeForce 7050/nForce 610dans. Could there be a compatibility problem with a recent automatic update?

  Change of monitor-problem still exists.

  Check the cable problem still exists.

  Had the same problem 5/6 weeks ago. Seemed to correct itself but problem home yesterday and will not go away.

  Original title: red color went from my screen

  Thank you. I tried a different monitor on the same cable and had the same problem. I tried another computer with the same cable and had no problems. Now, I installed a replacement graphics card and the problem is solved. Response - graphics card has failed. New card replacement/installation.

  Kind regards

  Bob.

• 5 Lightroom do not make the red color correctly

  Out of the blue, LR5 decided to make red like a dark orange - similar to the orange colors of the SF Giants team.  But the red in glimpses of import LR5 is correct.  It is also true in another editor, Faststone Image Viewer and Irfan View.

  It is orange when open in Camera RAW 8.1 PS Elements 10.  If the culprit seems to be Camera Raw 8.1.

  A picture is worth a thousand words:

  

  DdeGannes wrote:

  Then I rest my case you have a problem with the monitor profile.

  You will have to reopen the case.  After a few detective online, I swapped the (no pins missing or twisted) VGA cable to a DVI cable.  Problem solved.

• The browser window is empty after installation, no button or the view menu. Homepage is just a black background. What has gone wrong?

  Just upgraded to Firefox 33. Using Windows 7 Enterprise, 32-bit edition.

  Found answer to my problem in the thread here:
  https://support.Mozilla.org/en-us/questions/1025438

• How to change the background of bright red color

  I have reset the window color and appearance after that I had a problem with a Lexmark printer and sent to a store.  The color was diffferent when I came, so I reset to windows Standard, but the context in which some things now is bright red and I can not read.  I see red as the choice in the settings.  How can I get rid of the bright red background?

  Hello

  ·         Are you red color when you print a page or background on the Windows desktop?

  If you want to reset the Windows colors default to all the features of office and Windows, uninstall any theme party installed, right click on the desktop and choose personalize, click Windows Vista Aero theme to restore the default value.

  You may consult:

  Color settings management: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/color-management-settings-frequently-asked-questions

  See also:

  Change the settings for color management (also valid for Windows Vista)

  http://Windows.Microsoft.com/en-us/Windows7/change-color-management-settings

  If the problem is with the printer you can try to contact the site of support of printer for further assistance.

• red color on the web is printing on yellow paper

  When we look at site the red color is yellow printing on paper

  Hello
  1 does with a particular Web page or it occurs with all Web pages?
  2. what happens when you print offline?
  3. What is the brand and model of the printer?
  4. have you recently changed the cartridge?
  5. Since when are you facing this problem?
   
  Looks like there could be some problems with the ink cartridges; Please provide us with the required information so that we can better help you.
  Try these:
  (a) in the print dialog box, select your printer and click Properties.
  (b) set the paper Type on paper that most resembles the paper that you are profiling.
  (c) set to Off color management.
  Note: In some printer drivers, select advanced or customized to find these options.
  You can also check:
  http://Windows.Microsoft.com/en-us/Windows7/help/videos/printing-options
  http://Windows.Microsoft.com/en-us/Windows7/choosing-print-options

• HP Deskjet 970Cse only prints red after the new color cartridge installed.

  HP Deskjet 970Cse only prints red after the new color cartridge installed. I use black HP 45 and HP 78 color. Both are new. I know the printer is an older model, but it works well a month ago.  Any help would be appreciated.

  Thank you for your help.  It was a faulty cartridge.  I pressed a white cloth on the ink source and only yellow and blue were visible, without red (magenta).  I've returned the fabric and cartridge in the store (with my receipt) and managed to get another canister... it worked!  Both cartridges have dates of expiry of 2016.  Glad I didn't have to spend time troubleshooting my printer.

• HP551dn - red color on the pages

  When I do duplex printing I get the color red on both sides of the paper, when it is a mere impression, a page, everything is good! Someone has an idea what is the problem? I changed the magenta cartridge, and for awhile, everything was fine now, I have the red color on both sides of the paper again!

  can someone help me with a cause, please?

  The problem is, or was, only for red, and it was as if the Red 'ink' was being spread on the roller and the paper had therefore streaks and patches of Red everywhere.

  I must say it took me some time to understand. Most of the 'solutions' say that as a first step, we have to understand if it's the cartridge or the printer and the best way to do that is to swap cartridges autour and see what happens.

  I did but the printer didn't like the cartridges in the wrong location, he wanted the Red cartridge in the slot red if I received an error message. Then I tried with a succession of new cartridges and finally, I came to the conclusion that, as improbable as it was, the problem was the cartridge, but also the set of cartridges because it happened with several cartridges.

  The dealer who I got cartridges said they had no complaints of another of their customers!

  Anyway, for the past few days, I have had yet another new cartridge into the printer and everything seems to work very well.

• How to set the color palette for the system colors for the visible record of all controls on the web page?

  The color scheme by default in Windows 7 (x 36, Premium family edition) offers a combination of a white background for the application windows and black text for information that are there.   But being a visually handicapped person, I find the white background rather irritating to the eyes, and I'd rather have a black background, with white text, as this combination gives me a comfortable environment to work on the computer for long periods.  When I set these colors according to my convenience, using the link ' Customize > window color > color and appearance of windows "and by changing only the colours of the just 'Windows' choice in the dialog box, I think the colors of several other controls, in particular the"Drop Down Lists","Framed"and"Buttons"are also changed, often to be the same thus making the information unreadable such controls.  As these color changes seem to be rather random and apparently 'unpredictable', I cannot set the application window, according to my convenience.  I'm not able to get any useful information from the link "Help and Support" of the STARTUP dialog, about the dependencies of the combinations of colors of controls, or the link dialog box "Customize > window color > color and appearance of windows ' lists all controls that are normally used in any typical web page.  After spending a lot of time and effort - and therefore actually "lose" my time at the computer - through several tests, with all giving them negative results, I am at a loss to get this problem is solved.  Furthermore, I can't go back to the default of origin either.  So my computer is idle for a very large part of the day.

  I would be really grateful to all users or personal assistance MS, who take the time to provide me with an answer to this problem and help me use the computer in a fruitful way.  I offer my sincerest thanks in advance to anyone who offers me a complete solution.

  Hello

  I suggest that you go through the Microsoft article and check if it helps.
  Turn on high contrast http://windows.microsoft.com/en-US/windows7/Turn-on-High-Contrast

• Red color does not print

  I have a L7555 running Vista. The red color will not print. I installed new cartridges and print heads clean. What should I do to fix this?

  Thank you!

  Here a link to a document that addresses the issues of print quality for your printer model. IT will give you the different troubleshooting steps to try in an effort to repair the printer output. If you try all the solutions listed in the document and it is not returned to a State of operation, sought to replace the product. If you are still in warranty, HP can replace the printer without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.

  HP Technical Support call case form:

  https://h10025.www1.HP.com/ewfrf/wc/phoneInput?cc=us&DLC=en&LC=en&product=5061082

• Why the Replace Color tool does not replace my color?

  I have the following situation:

  White in the image.

  Choose the color replacement tool

  Choose a red color

  Apply the white color tool

  Nothing happens

  Change color to light mode

  Receive a brownish band where the tool is applied

  Change the color mode and apply the tool to brownish band

  Receive a red strip, where was formerly the brownish one.

  See the three States of the image in the attachment.

  Why was not applied in the first and replaced color replacement tool white with red?

  

  White is not one any colour change, because there is nothing to change.  Try to place a filled layer of red, above a layer filled with white and setting the blending mode of the layer of the red color to the color.  It just goes to white.  Now fill in the color of white background with grey wire (any value will do.  The darker the gray, the more saturated the Red will become.  Less of the tracks until you get 50% gray.  From there in complete darkness, it becomes darker. When you reach the full black, once more, there is nothing for the color work on, and it appears black.

  It is a useful exercise of understanding how to mix work modes.