Red color does not print

Similar Questions

• The red color does not print correctly. Have just replaced the Red cartridge and the problem remains

  HP Color LaserJet 2600n, Windows 7 64 bit

  The red color does not print correctly, it of a weak orange and turn yellow on the edges.

  The problem is, even if we just replaced the cartridge.

  The other colors are fine.

  I'm sorry.  It's a consumer forum and your printer is a product of the company; would be better served on the forum planned for it.  The business forum will be experienced in printers of business community members and expose the post more than members with the knowledge needed to answer.

  http://h30499.www3.HP.com/T5/printers-LaserJet/BD-p/BSC-413#.UDQAKt2PUaA

• Photosmart HP 7510: Single color does not print

  Hello

  Does not print the magenta color. I put a new cartridge in (both are new and not expired).

  As requested by another post on this page, I have cleaned the contacts on the cartridge and printer with clear water. Did not help.

  I ran a printed report that says in the text that all is well, but the magenta is very slightly ridged (so not quite Miss).

  One of the ideas for what I can try next? Appreciate any help you can offer.

  THX!

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly post information and series numbers.

  If you are unfamiliar with the operation of the function of private messages of the Forum, this post has instructions.

• 6500 more E710n-z: black color does not print

  I can not get the black to print.  All the other colors print OK.  Put in a new cartridge blk (though even the former was still 3/4 full) and that has not worked.   A ran the HP print and scan doctor, says all this bbut OK still does not work.  Clean the print heads several times, still does not work. Unplugged and powered by the printer, still nothing.  Any ideas...?

  The here document has troubleshooting which can help solve the black does not print on your Officejet 6500 has more.  Be sure to check the vents.  If the above does not resolve the problem, the message here can help.

• LaserJet Pro 200 M276NW color does not print more than once; application freezes

  Hello.  I had a problem with Laserjet Pro 200 color M276NW my family when printing from my desktop Windows 7 (64 bit) for quite awhile.  The first time I print a document after starting my computer, it prints the entire document very well.  However, the print jobs will simply freeze the program that sent them (for example Outlook, Opera, etc.) on a screen ' print the page of.  Also, I can't print a test page in Windows when the first task is completed.  I finally realized that it probably has something to do with the spooler service in Windows, or in the print queue.  When I look in the queue after printing the first document, it shows that the paper in it, but the new job that froze my app does not appear.  After I restarted my computer, I can print a document more before I have to restart again.

  The printer is networked on our home network; It is not connected to any computer via USB, and in my opinion, is the connection to the ethernet router.  My computer is connected to our network via a wireless connection.  I tried to restart the spooler, enter the IP address of the printer in my web browser (which works fine and shows the right page), and everything else listed in the Help article.  Try to open the printer properties in devices and printers does nothing.

  To complicate, the printer won't even print the first work since I got on my computer and I tried this today.  Also, I got exactly the same problem on my laptop, which also used Windows 7 and connected to our home network wireless. The laptop now has Linux on it instead. I tested several printing on it earlier and they print very well.

  My father, who has a wired connection to the router, told me that it is able to print more than one job very well.  I just had my brother (who also has a wired connection) print two different documents, and it has worked very well.  This leads me to believe that there is somehow something to do with the Wi - Fi computer assigned to the router, in combination with Windows 7, apparently.

  Moon Raker, starting with the sounds like it is a driver problem. I want to start to be sure that deleting the software and relocation happened in the best way possible. I want you to follow my steps, I can be sure that we start both on the same page.

• hpL7580 printer red ink does not print not EXCEPT when running diagnostics

  I have a hp L7580 and for the past 4 months red ink not print NOT either at all or only when you feel stroking in. I bought a new ink cartridge Magenta hp and I replaced 2 times the printhead with new heads of hp. Those dear people... come on hp! I have run many times diagnostics but also cleaned the printheads, printer-aligned and calibrated the line break. All these troubleshooting steps have been made several times that I have appendages. The Red (magenta) out of big beautiful even on tests, but to print anything just forget it. He's not here and it is getting old. Please help with something different and works if all goes well!

  [Moved from Community Participation]

  .. .come on hp!

  Hello

  1 have you tried reinstalling the drivers?

  2. check with HP support.

  http://WWW8.HP.com/us/en/support.html

  Don

• LaserJet 500 M551 color does not print double sided

  Hello

  I have the strange situation of a having one of three Laserjet 500 printers that won't print two-sided, despite the same to the other settings both. I tried a factory reset, checked all the settings several times and it has not changed. Everything on it works fine, and I'm at something of a loss, so any help appreciated.

  Run a config page and compare the model number with the other printer config page. Configuration page is located under the administration menu and then reports.

• Inkjet e: 5740 5740 printer does not print color cyan & alignment problem

  Hello

  Recently, I replaced my lights on my P 5740 printer ink cartridge while trying once photograpgh print [6 x 4] & have had nothing more than headaches since.

  The cyan color does not print ink levels indicate that it is used. I cleaned the heads of ink at level 3. I have replaced the ink cartridge & still have the same problem and now the alignment is unsuccessful.

  I'm challenged to begin with technology & this challenge is both frustrating and disappointing that I do not understand what I did right.

  Any suggestions before I have packing the printer & return to Staples?

  Thank you

  HI @RC23,

  Because the printer is only a couple of months I suggest to HP customer care and ask about a replacement printer. Most likely, it is a matter of ink system, since you've already tried another cartridge with the same results. Check the model number and the form to receive a file number for faster assistance.

  Thank you!

• Laser color CP1025nw spray: printer does not print

  The LaserJet CP1025nw color does not print when I click on 'print '.  The green light is, as if the printer is ready to print.  Ordinary laser printing paper is properly loaded in the tray.  The black toner is 70% and the three colors are all<10%.  i="" have="" set="" the="" printer="" to="">

  When I click on 'Print' there are no sounds of the printer, however, the green light remains on constantly.  It does not, Flash as it does when you're printing.

  This printer can print grayscale with empty color cartridges?  I am trying to print a b & w text.  If so, what should I do?

  Thanks for any idea that you can provide.

  JBC2

  Hi @JBC2,

  I see that you have problems printing and want to know if you can print grayscale if the colour toners are exhausted. I'd love to help you.

  If any toners and are completely exhausted, the printer will not continue to print until they were replaced.

  Try and print a self-test on the printer hardware to see if it is a hardware or software problem.

  HP LaserJet Pro CP1025 and printers color CP1025nw - printing a Configuration Page.

  I have provided a few steps if the problem is software partner.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click Print & Scan.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +.  Then click the Add button.

  How is the printer connected? (USB, Ethernet, WiFi)

  If you appreciate my efforts, please click on the button below the thumbs up.

  If there is anything else I can help you, let me know. Thank you.

• E printer HP PhotSmart 6525: color is not printing

  Color does not print when the color is selected.  I have replaced the cartridges with new HP cartridges.  run align them and clean print head a couple of times, but nothing is working.  The best I get is black if necessary and orange/rust where he see the tru colors.

  Hello

  The only solution to this problem is to make sure there are at least 50% of ink cartridges and cleaning the print head for at least 3 times. Wait 15 minutes, and then try to print it.

  If the problem persists, it might be a problem with the printhead that is a fixed and cannot be replaced. That is why its time to replace a printer.

  Please call the HP Technical Support for assistance.

  If you are in the United States, the toll free # is 1-800-474-6836.

  If you're not in the United States, and then connect to www.hp.com , bottom left it is an icon of the world map, click it and then select the region that you belong to, which would then provide the support options for you for this region.

• red laser toner does not print on M476Nw MFP

  Just bought a new HP Color Laserjet Pro MFP M476nw. all put in place smooth like silk, but the red ink will not print. I ran the calibration print several times but it isn't print a calibration page. It is said print document but nothing doesn't come out. What should I do next?

  Hi DCLEE,

  I'm sorry to know that you have problems with your new HP product.

  This product has an internal calibration procedure, it does not print a page during or after calibration.

  In addition to the calibration page, are you able to print other documents from the printer? I understand that printed pages do not encounter red (Magenta) color pictures.

  Try printing a test page for the engine and check if all 4 colors are printed.

• HP Deskjet 990cxi does not print color

  HP Deskjet 990cxi had for many years with no problems.  Once the color has begun to come out in pink, I replaced the cartridge from the printer and now it does not print in black and faded rose.  I replaced the cartridge with an another new and still the same results.

  Can someone help and let me know what I need to do?

  Hello LoBaan,

  Welcome to the Forums of HP Support! I see that you are not able to print in color on your HP Deskjet 990cxi, you replaced the cartridges without success. I would like that you start here: lack of color, wrong color or cast in print, follow these steps to resolve the problem you are experiencing.

  Let me know the results, I'll watch for your reply.

  Thank you

• Officejet 6310 does not print in color but Mac prints a color scan

  Officejet 6310 does not print in color but Mac prints a color scan

  Awesome!

  Thank you very much.

• HP Deskjet 3050: deskjet 3050 does not print the JPG files in color - all other documents are printed only in black and white

  Dear all,

  I have a problem with my Printer 3050 Deskjet. (USB connected with my laptop).

  My printer does not print documents colors in color, but only in black and white (with the exception of JPGs (photographs) which are printed in color.

  Word or PDF documents (for example) are always printed in black and white - even if they are in color.

  Copy of pages in color on my printer is not a problem.

  This works perfectly well. The printer is connected to my PC via USB.

  Cartridges (color and black and white) are practically new and original HP cartridges.

  Could the problem be associated I could have changed by accident print settings.

  Thanks in advance for your advice.

  Cheticamp

  Hi Cheticamp,

  In controlling panrl → devices and printers.
  Right-click on the printer and select Printing Preferences.
  Cot the Advanced button and make sure that grayscale printing is set as stop and confirm.

  From within Word, click file > print and click settings.
  You will see the screen Lady printing preferences.
  Press Advanced Options and check the optio grayscale is set as off for Word as well.

  Hope that helps,
  Shlomi

• OfficeJet 6000 E609n: One color (black) does not print

  Background the color black does not print.
  Background page printed from the printer status indicates that there is no black ink. This impression has said that there is sufficient (at least 20%) supply of three coloured inks. Per the comment above, no black printing does appear on the page printed of the status of the printer, even if the black cartridge has been rather recently installed (2015-12-24).
  Background none of the four "low ink" lights on the printer are turned on.
  Background the State indicated by the HP Solution Center utility displays a green check mark, that is to say, that everything is OK.
  Background the "estimated ink levels" in the utility HP Solution Center indicate that the black ink cartridge is about 60% full.
  Background I've done the first of these two cleaning procedures to clean the print head. It produces no change. (In fact twice.)
  Background I removed the power cord to the printer and unplugged the power cord from the source and then wait 10 seconds. Then I reconnected things together. Nothing has changed.
  Background I cleaned the vent for the black cartridge.
  Background I replaced the black cartridge. The level indicated on the "Estimated ink levels" in the HP Solution Center utility now indicate that the black ink cartridge is 100% full.  No change.

  Background now, I think that the problem may be the print head.  I am discouraged.

  Any suggestions?

  Hi @Upper_Left,

  It seems as if the HP product registration service is temporarily unavailable.

  Normally you get invited to register immediately after installation is complete.

  It's a Web page that can help you know if the printer is listed, or as aid re-register once the number of available service - Registration Question Index.

  The term of defective kernel is used which means that the defective part you are replacing is the same part that you send back.

  When you select the option to change the replacement part is usually repaired or refurbished, is why there is such a difference in price between the parties. It seems that if the defective part is not returned within the specified time. 'faulty base tax' is loaded.

  I can't say for sure 100% that the problem will be resolved to the replacement printhead. If the printer was in warranty, it would be the normal order of operations.

  Please click the "accept as Solution" and the "thumbs up" button up on top of my first response above and other similar issues may find the easiest solution.
   
  Thank you!