By the way a cluster with table of a dll

Similar Questions

• Extend the current TMS Cluster with two new server

  Hello

  We currently have a cluster of two TMS-Server (13.2.1) installed on a W2K3 Server with a database on a SQL-Server separat

  To have a smooth migration, we thought the following procedure.

  Addition of two new server with W2K8 R2 by installing a TMS 13.2.1 to the cluster with access to the same database.

  After a while remove the two old server and upgrade to TMS14 (updated TMSPE in advance).

  Unfortunately, we get the message, as seen in the PNG-attachment during the installation of the first server in new.

  Anyone know if we could proceed as described above?

  Is the message because of the different operating system. If I click on 'Yes' former TMS-server still works?

  Thank you

  Concerning

  Ingo

  Hello

  The error message is misleading and can be safely ignored, and you can continue with the installation of the new TMS nodes. It was deleted in 14.0 TMS, see bug CSCui34702.

  Kind regards

  Kjetil

• How do I change LR5 develop settings to the way they worked with LR4?

  I was uncomfortable with the way in which the development parameters worked with LR4.  Now when I use the brush teeth whitening or soften the skin gives a red tint to the brush, and then applies the adjustment when you tap done.  I prefer the shape of LR4 to apply the adjustment immediately with the brush stroke.  So is it possible to come back?

  Thanks for any help.

  You use the overlay!

  Press O on your keyboard.

• How to add the new model feature with tables of another data schema?

  Hi all
  
  I am trying to add an entity data model to my request. The tables I need are on a schema that does NOT have a default schema of connection of the connection. So I go through the Wizard add new Entity Data Model, generation from database, but then when it comes time to choose your database objects, the only thing that shows is all that is on the default schema. How can I access stuff to another schema with an entity data model?
  
  (Tangentially: it is also a problem with the old Server Explorer simply itself - when adding an oracle db, I see the other schema object in the treeview control to break.) But when I right click the db and the new query, tables of other scheme become available to me here. "So it is less of a problem in the case of Server Explorer).
  
  I found this small excerpt to reach other patterns, but I couldn't make it work in the case of the ora db. Any suggestions?
  
  Thanks for the tips,
  -sff

  Suppose that schema_a has granted privileges to schema_b on database belonged to schema_a objects by running the GRANT statements.
  You add a connection in Server Explorer using schema_b, and then add the schema_a in the "Filters" menu... ». Don't forget to click on
  the button of update in "Filters" dialog box and confirm schema_a illustrated with schema_b in the column 'value '.

  When to use EDM Wizard to create a database data model, choose the connection that you added by using Server Explorer
  schema_b. You will see the database of objects belonging to both schema_b and schema_a select and generate your data model. Schema_b
  should be able to use the database objects belonged to schema_a according to the privileges granted.

• My computer removes the programs and changes the way it works without my help or knowledge

  Hello

  I had a problem recently with my computer changes the way it works with some programs. I use my computer to print postage labels, and all of a sudden, now it asks me to save in my documents before I can print them. I did have to take the additional step before.

  And also, I use Adobe Acrobat to print the labels, and this afternoon, I printed a label and then had to leave. When I came back home I need to print another label, but kept getting the error 'invalid registry. When I checked the Adobe Acrobat program was missing from my computer?

  I'm the only person in my family who use this computer. Who removed the program? Can I have a virus? My computer works just fine in general, it's fast and responsive. Is it Spyware or malware? Everyone is faced with this problem?

  Thank you for your help...

  Darryl Hello,

  Thanks for posting your query in Microsoft Community.

  We regret the inconvenience caused to you. We will help you with the question.

  1. Have you checked in programs and features if you can find the Adobe Acrobat program?
  2. Have you installed all the updates of Windows pending?

  For now try the steps and check them off below if it helps:

  Step 1: Install all pending Windows updates and check.

  Step 2: Follow the suggestion given by Cynthia kasibhatla from link given below and check if this can help:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-Winapps/reader-error-invalid-value-for-registry-when/e76fe781-9457-4f48-93e2-a85b443ef3be

  Let us know the status of the issue. We will be happy to help you further.

  Thank you.

• Panel request ADF with Table does not work

  I am simple search.jsf of JSF page. In the search.jsf , I have an ADF search form. I drag and drop the view criteria into the Panel Query ADF with Table. The user search result will be displayed in a table ADF. The View object is simple no LOVs no variable binding even no where clause.

  
  

  
  

  Everything works fine if I run the page separately not with in the workflow. But if I turn the page with in a workflow, the search engine does not work.

  The workflow structure is simple, it has towed home.jsf and search.jsf pages and there is a control of navigation of the home page to the Search page. The problem is that the search engine is not work IE when I press the default search key that doesn't come with the form no coming on the data table.,.

  
  

  I use Jdeveloper with ADF technology 11.1.2.3
  

  My God, what a ridiculous and foolish.

  Partial trigger is missing.

  I have to add the id of the request to the partial trigger on the table. I thought that his coming by default to search forum.

  What a waste of time...

• Help with the cluster in table for the cluster size difference, please!

  I will admit to still hurt with the berries of LabVIEW, and as usual, the behavior in the vi attached is meaningless to me!  The attached vi shows a cluster 6 element being converted into a table, then immediately to a cluster.  The reconstructed cluster has 9 elements, even if the table size indicator display properly 6.  How to maintain the initial cluster size when converting to and then since then, a table?

  The f

  Well, if you have worked with context-sensitive help running you would see:

  "With the right button of the function and select the Size of Cluster in the context menu to set the number of items in the cluster."

  The default is new. The maximum cluster size for this function is 256. »

  You must set the size. There is no way for the function to know how many elements in the table.

• Initialize the cluster with data types different (lots of data)

  Hello

  I have data, which are composed of different data types. First of all, I have initialize cluster with these types of data and then "print" to light (photo). In case of photo data carries 8 characters than ja 4 floats. It was easy to initialize, but here's the question: How can I do this even if I have data that look like this (interpreter):

  floating point number

  name char [32]

  Short value [16]

  What I create loooong cluster which have a fleet of 32 characters, 16 short films? Or I can create these 'paintings' in a different way?

  THX once again

  -Aa-

  I suggest using the table-cluster and configuration of the cluster size to match the size of your berries, then package these groups together.  In terms of storage of LabVIEW, there is no difference between a group of

  floating point number

  Name1 tank

  name2 tank

  ...

  short value1

  short value2

  ...

  and a bunch of

  floating point number

  -> cluster shipped from

  Name1 tank

  name2 tank

  ...

  -> cluster shipped from

  short value1

  short value2

  So you can use the cluster table to get the right sizes rather than individually create all these values in a single giant cluster.

• Best way to update the individual rows of a Table?

  I took a quick glance at a few examples, but did not get a clarification on this.  I am looking to have something close to a listbox control or the table to where I can update just one column of values to line a 1 time per second pace.  I'm looking to display our acquisition of data values in a table or a listbox control.  The single list box seemed to work well for that, but I couldn't use the row headers to list the names of channel beside the channel values.  I thought to link the values of cursor in two areas of list to do this, but did not find any info on it for the single list box.

  I have a few questions:

  (1) I have a 1 d table to where I want to use this data to constantly update the first column (with a multitude of lines) of a table.  I'm looking for the best route to not take too much time for treatment by doing this.

  What is the best way to update the individual rows of a table?   Invoke the node "Value of the cell value"... or is there another method?

  (2) why is that, after each iteration else, row values are deleted?

  Also, for adding additional channels originally arrray... it is better to use the 'Array' subset then the function "Construct the table" or function "Subset of the table" and "insert table"?

  See the attached example.

  Thank you.

  Jeff· Þ· Bohrer says:

  (2) why is that, after each iteration else, row values are deleted?

  Classic race condition.  dump the loop and node-p and just wire the 2D table on the terminal Board. !

  I don't see the race condition.  What I see is the table once the last element has been written for it all run the oil.  I saw looked it with point culminating performance on.

  But I agree entirely with writing to the Terminal.  It is a 1 d array, so you will need to use an array of generation and convert a 2D array in order so that he could write correctly.

• Problem with the sum of the elements of cluster

  Hello

  I have a problem (maybe very simple to solve). I have a cluster with 3 integers inside. I'm building a table of these elements (after unbundling my cluster) and I want to make the sum of all these parts. However, my result is not satisfactory. For example: my table: [255,255,238] and LV shows me the sum of the parts: 236.

  Probe 6 on my printscreen: my table

  The probe 7: operating result of the sum

  What I am doing wrong? Thanks in advance

  

  Your data type seems to be U8, so the maximum value can not 255. (It's a little hard to read because of the image resizing). Why don't attach you the VI instead?

  If you need the actual amount, you must first convert them to a different representation (for example the U16).

  In addition, what is the purpose of the loop FOR? Since it only works for an iteration, you might as well delete.

• Two-node Rac (11204) Cluster node 1 has failed to stop with error: impossible to get in touch with the loan of cluster service. duty to force stop

  Newly build Production environment (don't use it yet)

  OS: Linux redhat 64-bit 2.6.18

  Cluster version: 11.2.0.4

  This environment clusterware installed last December, we are trying to install oracle RDBMS, so try to first stop the crs.  However on node 1, the v$ asm_diskgroup shows nothing under total_mb /free_mb on diskgroup OCR.  and stop the crs shows: impossible to get in touch with the loan of cluster service.

  Alerts cluster log shows below:

  2014-03-25 03:50:01.429:

  [crsd (8608)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u00/app/11.2.0.4/grid/log/oprd100/crsd/crsd.log.

  2014-03-25 03:50:01.433:

  [crsd (8608)] CRS - 0804:Cluster Ready Service interrupted due to the Oracle Cluster registry error [PROC-26: error when accessing the physical storage]

  ]. Details at (: CRSD00111 :) in u01/app/11.2.0.4/grid/log/orpd100/crsd/crsd.log.)

  2014-03-25 03:50:02.123:

  [ohasd (12490)] CRS - 2765:Resource 'ora.crsd' failed on the server "orpd100".

  2014-03-25 03:50:03.407:

  [crsd (8623)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/11.2.0.4/grid/log/orpd100/crsd/crsd.log.

  2014-03-25 03:50:03.411:

  [crsd (8623)] CRS - 0804:Cluster Ready Service interrupted due to the Oracle Cluster registry error [PROC-26: error when accessing the physical storage]

  The NEWSPAPER of the ASM alerts:

  Wed Mar 25 03:21:49 2014

  WARNING: Waited 15 seconds IO to write to the disk of PST 1 in Group 1.

  WARNING: Waited 15 seconds to write IO to disk of PST 2 in Group 1.

  WARNING: Waited 15 seconds IO to write to the disk of PST 1 in Group 1.

  WARNING: Waited 15 seconds to write IO to disk of PST 2 in Group 1.

  Wed Mar 25 03:21:49 2014

  NOTE: process _b000_ + asm1 initiating (21071) 1.1807368888 disk offline (OCR_0681_2EF4) with mask 0x7e in Group 1

  NOTE: process _b000_ + asm1 initiating (21071) 2.1807368889 disk offline (OCR_0681_2EF5) with mask 0x7e in Group 1

  NOTE: check PST: grp = 1

  GMON seeking ways of disc for Group 1 to 5 pid 27, DiSo 21071

  ERROR: read no quorum within Group: required 2 found 1 records

  NOTE: audit PST grp 1 fact.

  NOTE: start the PST update: grp = 1, dsk = 1/0x6bba42b8, mask is 0x6a, op = clear

  NOTE: start the PST update: grp = 1, = 2/0x6bba42b9 dsk, mask is 0x6a, op = clear

  GMON update modes of disk for the Group 1 to 6 for 27, DiSo 21071 pid

  ERROR: read no quorum within Group: required 2 found 1 records

  Wed Mar 25 03:21:49 2014

  NOTE: disassembly of the cache (not clean) Group 1/0x35AAB27B (OCR_DATA)

  WARNING: For disk offline OCR_0681_2EF4 0x7f mode failed.

  2 node rac cluster is normal.  We were able to stop the crs without force.

  What should I look at to understand what is happening here?

  Thanks to adavnace.

  WARNING: For disk offline OCR_0681_2EF5 0x7f mode failed.

  NOTE: e-mail CKPT suspend pins Unix process pid: 21073, image:

  No default value is 1 M

• Best way to update a table with separate values

  Hi, I would really appreciate some advise:
  
  I need to regularly perform a task where I update 1 table with all the new data that has been entered in another table. I cannot perform a complete insert because this will create data duplicated each time it works, so the only way I can think of is the use of cursors in the script below:
  
  
  CREATE OR REPLACE PROCEDURE update_new_mem IS
  tmpVar NUMBER;
  
  CURSOR c_mem IS
  SELECT nom_membre, member_id
  OF gym.members;
  CREC c_mem % ROWTYPE;
  
  
  BEGIN
  OPEN c_mem.
  LOOP
  SEEK c_mem INTO crec;
  EXIT WHEN c_mem % NOTFOUND;
  BEGIN
  UPDATE gym.lifts
  Name = crec.member_name
  WHERE member_id = crec.member_id;
  EXCEPTION
  WHEN NO_DATA_FOUND THEN NULL;
  END;
  IF SQL % NOTFOUND THEN
  BEGIN
  INSERT INTO gym.lifts
  (name, member_id)
  VALUES (crec.member_name, crec.member_id);
  END;
  END IF;
  END LOOP;
  CLOSE C_mem;
  
  END update_new_mem;
  
  
  
  This method works, but y at - it a (faster) easier way to update another table with new data only?
  
  Thank you very much

  >
  This method works, but y at - it a (faster) easier way to update another table with new data only?
  >
  Almost anything would be better than this treatment of slow-by-slow loop.

  You don't need a procedure, you should just use MERGE for this. See the examples in the section of the MERGER of the doc of the SQL language
  http://docs.Oracle.com/CD/B28359_01/server.111/b28286/statements_9016.htm

  MERGE INTO bonuses D
     USING (SELECT employee_id, salary, department_id FROM employees
     WHERE department_id = 80) S
     ON (D.employee_id = S.employee_id)
     WHEN MATCHED THEN UPDATE SET D.bonus = D.bonus + S.salary*.01
       DELETE WHERE (S.salary > 8000)
     WHEN NOT MATCHED THEN INSERT (D.employee_id, D.bonus)
       VALUES (S.employee_id, S.salary*.01)
       WHERE (S.salary <= 8000);
  

• Regarding the count (*) while using with the table alias

  Hello
  I question in Count (*). It will work with table alias.
  
  It works when I use it as below
  
  'select count (*) po_headers_all po_header_id' - his works perfectly
  
  but, when I questioned as below his does not.
  
  "select count (*) from po_headers_all poh poh.po_header_id".
  
  I like you guys to clarify my request.
  
  Thanks in advance.
  
  Kind regards
  Uvaraja

  Uvaraja wrote:
  Hello
  I question in Count (*). It will work with table alias.

  It works when I use it as below

  'select count (*) po_headers_all po_header_id' - his works perfectly

  but, when I questioned as below his does not.

  "select count (*) from po_headers_all poh poh.po_header_id".

  I like you guys to clarify my request.

  Thanks in advance.

  Kind regards
  Uvaraja

  Does it that way if you want to use the alias with the County, you must do the following:

  Select count (test.column) from my_table test;

  Select test.* my_table test;

• Require a script to the list of files with sizes on all data stores in a cluster

  Hi all

  Please be gentle, im not new to Vmware, but new to powershell/powercli and need your help.

  cli power can make or y at - it tools available that will do that for me?

  I need to generate a list of all the files of the virtual machine in all stores of data available for cluster and their sizes to go with it.

  I am mainly interested in the .log files and vmdk files, but I don't mind if it lists all.

  I don't mind how his im laid out not after anything fancy just a list of output type something like

  /

  I did some research but there is nothing I have found that it will make.

  My environment is currently esx 3.0.2 with vcenter servers. (currently being upgraded to 4)

  Lots of help thanks

  Yes, it's a 'characteristic' knowledge when using PowerCLI 4u1 against a VI 3.x environment.

  There is a way to workaround, try this

  $dsImpl = Get-Cluster  | Get-VMHost | Get-Datastore | where {$_.Type -eq "VMFS"}
  $dsImpl | % {
       $ds = $_ | Get-View
       $path = ""
       $dsBrowser = Get-View $ds.Browser
       $spec = New-Object VMware.Vim.HostDatastoreBrowserSearchSpec
       $spec.Details = New-Object VMware.Vim.FileQueryFlags
       $spec.Details.fileSize = $true
       $spec.Details.fileType = $true
       $vmdkQry = New-Object VMware.Vim.VmDiskFileQuery
       $spec.Query = (New-Object VMware.Vim.VmDiskFileQuery),(New-Object VMware.Vim.VmLogFileQuery)
       #Workaround for vSphere 4 fileOwner bug
       if ($dsBrowser.Client.Version -eq "Vim4") {
            $spec = [http://VMware.Vim.VIConvert|http://VMware.Vim.VIConvert]::ToVim4($spec)
            $spec.details.fileOwnerSpecified = $true
            $dsBrowserMoRef = [http://VMware.Vim.VIConvert|http://VMware.Vim.VIConvert]::ToVim4($dsBrowser.MoRef);
            $taskMoRef = $dsBrowser.Client.VimService.SearchDatastoreSubFolders_Task($dsBrowserMoRef, $path, $spec)
            $result = [http://VMware.Vim.VIConvert|http://VMware.Vim.VIConvert]::ToVim($dsBrowser.WaitForTask([http://VMware.Vim.VIConvert|http://VMware.Vim.VIConvert]::ToVim($taskMoRef)))
       } else {
            $taskMoRef = $dsBrowser.SearchDatastoreSubFolders_Task($path, $spec)
            $task = Get-View $taskMoRef
            while("running","queued" -contains $task.Info.State){
                 $task.UpdateViewData("Info")
            }
            $result = $task.Info.Result
       }
  
       $result | % {
            $vmName = ([regex]::matches($_.FolderPath,"\[\w*\]\s*([^/]+)"))[0].groups[1].value
            $_.File | % {
                 New-Object PSObject -Property @{
                      DSName = $ds.Name
                      VMname = $vmName
                      FileName = $_.Path
                      FileSize = $_.FileSize
                 }
            }
       }
  } | Export-Csv "C:\File-report.csv" -NoTypeInformation -UseCulture
  

  I have attached the script to avoid any problems with the hooks.

  And the regex expression is updated to account for the names of comments with whites.

  ____________

  Blog: LucD notes

  Twitter: lucd22

• My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem?

  My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem?

  Hello brooksm549,
  Thank you for using communities of Apple Support.

  I got your message which, since updating your iPhone 6 to iOS 10.0.2 your iPhone stops when it is 40% and the power to empty very quickly. I understand your concern with the iPhone turn off and drains the battery. I recommend you to review the use of the battery to see what app contributes more to the battery drain. The following article will provide you with steps on how to check the use of the battery:

  On the use of the battery on your iPhone, iPad and iPod touch

  When you know about the soft uses more battery, you can change your settings in order to optimize the battery life:

  Maximize the life of the battery and battery life

  Best regards.