C2960S SG200-18 <>- shared - resources SG200 cut the net

Similar Questions

• The 'Net View system error 6118' command prompt

  Hello, I use windows 7, and just to know function prompt on other devices connected to the network, so I typed a clear view into the command prompt, but it displays error 6118 and list of servers for this workgroup is not currently available. Please advise me by giving your necessacry steps. Thank you

  Hello

  NET VIEW command is used to display a list of computers or network resources. The NET VIEW command displays a list of computers in the Group of specified work or shared resources available on the specified computer.

  Click on the link below and see if it helps.

  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/thread/fb6210f7-8167-4FA3-b0ea-ce71426e5fc3

  Good day!

• An error occurred when trying to share &#60; folder name &#62;. There is no end point for more available from the endpoint mapper. The shared resource was not created at this time

  Original title: sharing folder error

  How to solve this error message when I am trying to share a folder: "an error has occurred when trying to share . There is no end point for more available from the endpoint mapper. The shared resource was not created at this time. »

  Hello

  Were there any changes made on the computer before the show?

  I suggest to see the link and try to run the Troubleshooter:

  Share files with anyone

  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  See also:

  File sharing essentials

  http://Windows.Microsoft.com/en-us/Windows7/file-sharing-essentials

• Error: Upload shared resources HTML FAILURES: failed to download the shared resource of HTML

  Hello

  I created an application 6.1 AEM (SP1). I have completed the full cycle in my local create App/component model, connection with AEM Mobile, download Article download shared resources etc. Everything works very well in my local, but when I deployed my code in one of our test environments and tried the same thing I get following error when downloading shared resources and images of the dam are not displayed in the preflight.

  Upload in common resources HTML FAILURES: doesn't have a download of the shared resource of HTML

  I checked the logs, but there is nothing there.

  Help, please...

  Kind regards

  PM

  Hi h;

  Can you watch the AEM error.log and see if there's anything there?  AEM must record the problem at a certain level.  If you could provide a screenshot of the error in the log, it would be useful

  Also, can you us the resource HTML file what is?  Info on the number of individual files in the resource file help (I) believe MODs has a limit number of files into a single entity of MODs.

  You can get the resource from a URL (see below) file:

  http:// > / content/mobileapps />. sharedResources.dpsExport.zip

  For example: p http://localhost:4502/content/mobileapps/geometrixx-unlimited.sharedResources.dpsExport.zi

• Would it be possible to have 2 shared resources, a local containing all common topics and photos for several projects and another a remote control containing all the topics and pictures for the purpose of collaboration

  Hello

  I was wondering, now that I discovered the benefits of eating of the resource, if it would be possible to have 2 shared resources, a local with common themes and images for several projects and another one, remote, containing projects together, i.e. the subjects and images, for collaboration purposes.

  The only local, I intend to use it for my purposes to have common points (topics & photos) update of all projects where they appear and the distance that I intend to use it with remote colleagues, who might want to make changes in the topics.

  This would mean that the topics and current photos will be present in the resources, one local as one remote.

  Thank you.

  SVN is not a source control package?

  I'm not sure, but RoboHelp * MAY * be able to integrate with SVN to control projects and sharing.

  RoboHelp comes with RoboSource Control that could be used to provide the source code control. But if you already have a package in place, my thought is why reinvent the wheel? Simply use what is there.

  See you soon... Rick

• Is an FPGA host Interface a shared resource lock?

  I'm curious to know if the FPGA host Interface node is a shared resource. Which means, if I have a loop timed on a target time real LabVIEW (e.g. cRIO) who is reading and writing of the FPGA using the Interface of the host. The determinism of this loop will be concerns touched if I have other signls on the FPGA using the Interface of the host in a separate loop (a loop delay or a normal life while loop).

  More tersely said, is the Interface to the FPGA host a shared resource that can cause a reversal of priority if called from two separate loops?

  Thank you.

  Hey Southern_Cross,

  The Interface of the host as a whole is not a shared resource that is protected by a global lock, but calls to functions of specific host interface can acquire locks to protect shared resources. If you let me know what you call of each loop, I can let you know what kind of interactions are possible.

  Priority inversion should not happen. You see something akin to the inversion of priority for you? If so, I would be interested in the details, because this is the kind of issue, we take seriously.

  Thank you

  Sebastian

• You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The network path was not found. »

  What does this message mean? I get when I click on the icon to evaluate files on another of our computers. "You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The network path was not found. »

  The other computer has not been configured to allow remote access to this folder from your account.  You'll want to go to this other computer, right click on the folder that is shared and go to properties, then set the appropriate security settings to allow access.

• I need to access a shared resource by a Linux via NFS server from a Windows XP client.

  original title: access an nfs share

  I need to access a shared resource by a Linux server via nfs from a Windows XP client.

  I suggested to install "Windows Services for UNIX Version 3.5" and I downloaded it, but:

  • I see only an English (or maybe Japaneese) version: can be used on my Windows XP withoyut Italian language conflicts?
  • I tried the ti montage, but I find a lot of features, I don't need
  • When installing asked me questions that I can't answer

  Is there a simpler way to let a windows XP client to connect to an nfs share?

  If "Windows Services for UNIX Version 3.5" are the right solution, where can I find the documentation to install it in the simplest?

  Concerning

  Marius
  Roma - Italy

  Hello

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the forum TechNet Windows XP Service Pack 3 (SP3).

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• "files and printers, sharing resource is online but does not respond to connection attempts."

  I just got a HP Pavilion dm4-2180us running W 7 Home Premium which does not connect to other computers on my network, or residential group. I get the message "files and printers, sharing resource is online but does not respond to attempts at connection." and the path not found error code. All other 3 computers recognize and connect to the network with no probems, including an another Dell Inspiron also running the same version of 7 W bought the same month as this HP! I tried to launch the troubleshooting tool and even restore the computer to its orignal State; It woud work for a few days, then would not connect or recognize the other computers on the network.

  Help, please!

  A N T

  Hello Dynotnt,

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: If the method above does not help, then you can run the network troubleshooter and see if it can detect and correct the problem.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  I hope this helps.

• Set up two separate networks with access to shared resources

  Hi all

  We have a two separate companies in the same building which will both need access to shared resources and the same internet connection. They must be on separate subnets cannot communicate directly with each other. The current switch is a Cisco ESW-520-48P and we are looking to buy an SG-300-20 p for the new entity moving in. Heres how we envisage the establishment:

  • ESW-520 will host network company A. workstations, servers, etc.
  • SG - 300 will be two VLANS. Vlan1 will host any business network (B) workstations, servers, etc. VLAN2 will host shared resources, such as printers.
  • The internet gateway is a system based on UNIX with 3 CARDS. 2 NETWORK cards is absorbed by ADSL connections, while the other card NETWORK LAN, linking to VLAN2 on the SG-300. We would like to define which connection ADSL to carry through according to what subnet traffic is originating.
  • The ESW-520 need access to shared resources and the internet gateway on VLAN2 on the SG-300.

  This will be possible with these two switches? It would be the best way to go about this?

  Appreciate any recommendations that you can provide.

  Thank you

  Tom

  Hi Tom, yes the ESW can be either an access port to the vlan 2, unidentified or you can configure the trunk for the host devices on two subnets on the ESW, your choice. When the SX300 is L3 it will load the intervlan routing when you assign IP addresses for the interfaces of VLAN locally.

  Default gateways will be the SX300 Lass (interface vlan).  There will always be a route established between subnets so assign each vlan an IP address.

  You'll see ARP of course through the subnets of course. Not sure the DHCP acknowledgement, etc..

  -Tom
  Please mark replied messages useful

• Resources shared on XP in Windows 7 but cannot view shared resources on Windows 7 XP?

  Suddenly, my network has gone from wack-o!

  I cannot view shared resources (disks, folders) on the 7 machine Windows XP machine, but can view shared resources on Windows 7 machine from XP machine?

  Machine error message Windows 7:
  Windows cannot access \\machine\folder
  You are not allowed access to the \\machine\folder.  Contact your network administrator to request access.
  
  When I created the sharing folders and drives (on both XP machines and 7), the permissions for everyone.  I have the same name of user account on both computers.

  What is going on?

  Your general statement "Windows 7 has problems to access shared resources on XP" is incorrect. Yes, you have problems, but I have and none of my clients, amounts of problems to access the resources on XP Windows 7 boxes boxes. If something has changed in your situation, even if you don't think he has. It is very difficult to solve network problems without being on-site, but your error message does not indicate a problem with the username/password accounts, permissions or misconfigured firewall. All I can do is give you my usual network troubleshooting steps and you suggest to go through them. Also given that the problem comes from the XP box, troubleshooting of small network of Hans-Georg Michna MVP might help.

  http://winhlp.com/wxnet.htm - small troubleshooting network by Hans-Georg Michna

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  In Windows 7, go to control panel > everything in Control Panel > network and sharing Center. Click on "change the advanced sharing settings. You don't want to use the residential group unless you have all Windows 7 machines. If you do and you want to use the homegroup, see Windows 7 Help & Support. Otherwise, in sharing advanced:

  Discovery of plug in the network
  Open the files and printers sharing
  Turn on the sharing section Public folder sharing
  Plug the password protected sharing

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, turning on window file sharing and printer as the above will take care of that for you. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this:

  Start > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  XP - set up Windows to automatically connect (MVP Ramesh) - http://windowsxp.mvps.org/Autologon.htm

  D. Si one or more of the computers on your network are XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. In Windows 7 I usually share the Desktop of the user and the Public directory. MS - MVP - Elephant Boy computers - don't panic!

• Pinting/sharing, error 2114. The printer cannot be used by others on the network. Event ID: 315

  In my event log, I get the message "the print spooler could not share printer HP Deskject F2200 series with the HP Deskjet F2200 shared resource name.

  series. Error 2114. The printer cannot be used by others on the network.  Event ID: 315. "I have only one printer, and I'm not on a network share.  I only turn

  It's on when I need to use it.  Why I get this error?  It would cause my computer to freeze?

  BJB

  Hello

  I suggest you to refer to this link and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/error-2114/b87aa4ed-b4fb-43E0-9080-e3a7d7ffeaa3

  It will be useful.

• I want to import any small part of MP4 long clip. Can I cut the part I want beforee I import it? Jut import little clip

  I want to import any small part of MP4 long clip. Can I cut the part I want beforee I import it? Jut import little clip

  These are my own productions of the hour and a half and I want to participate just 5 minutes. What I have to import all this or can I cut it before.

  If I have to import it. How can I remove unused rest

  Look at the function EDIT here. Copy /Paste

  How to use QuickTime Player - Apple Support

• cut the bookmarks file, impossible to stick, file disappeared from the Favorites, how to recover?

  Hello
  Some time ago, I created a folder of bookmarks in Firefox Bookmarks and added a large number of bookmarks inside. Today, I wanted to cut the record, I did apparently, and paste it into a folder of Windows 7. When I tried to paste the folder, the command paste has not been highlighted for use. I went back to Firefox and my bookmarks folder went from bookmarks. So where is it. How can I recover my bookmarks folder? Using Firefox 3.6.13.

  If you have not closed Firefox, open the bookmarks library (in the menu, select Bookmarks organize bookmarks), and in the library, select organize > Cancel.

  If you have already closed Firefox, or the Cancel option is not available, you can restore one of the automatic backups of bookmark (Firefox creates backups of bookmarks for the last 5 days that it has been used). For details on how to see the "backup restore" section of the article restore bookmarks from a backup or move them to another computer .

• Is it possible to cut the warning you get when you delete a photo?

  Is it possible to cut the warning you get when you delete a photo?  It slows down the process so when you have thousands of pass by...

  Use the combination of keys ⌘⌫ (ccommand - delete) to remove a photo from a time or an album.  That will move the photo directly on the album recently deleted without any question.

  But don't forget to check the album recently removed carefully before you clear, if you use this method of removal.