C4380 disorder MAC wireless printing

Similar Questions

• Someone from HP can tell us when you will correct the C4580/Mac wireless printing problem?

  Like so many other posts on this forum "to support", my C4580 goes into sleep mode and wake up. I have already sent my printer original back, received a replacement and it has the same problem. Brutal...

  Just got the phone with the help of HP, and he said that HP is working on a fix. HP support by phone was always quite useful, but maybe they need to hire some new engineers.

  I see messages from November on this bug, and they do not always have a difficulty?

  This has been an absolute time thief. Next purchase of printer for me: Cannon.

  The Hewlett-Packard Company released an updated firmware for the problem which occurs on the Photosmart series C4500 and Photosmart C4400 series. Updates are currently available for use on the Windows operating system.

  The following links can be used to find the software for the two affected products.

  Update critical to prevent and does not state for Photosmart series C4400

  Update critical to prevent and does not state for Photosmart series C4500

• C4380 wireless printing does not work

  Please help, I have spent hours on it does not.

  until recently, under snow leopard, I had no probs printing c4380 wirelessly.

  While my sisters, I tried to print something out on his printer and its drivers installed. Then, I deleted these drivers.

  I could still print wireless, but suddenly it has stopped working. I tried most of the things, I uninstalled and installed the software again.

  passes the test (on the printer) the printer wireless network, but when I print I get a message saying that it does not connect. I can print when connected via USB. I seem to sometimes added... to get two versions of usb hp printer photosmart c4380 and the other something like photosmart c4380 [22437].

  I cannot open the Web page in-house printers and don't know how to get around this problem. When you open the printer utility, it will do via USB, but not wireless.

  on the HP configuration utility, most of the time it says no wifi network have been discovered. He always correctly will allow me to enter the SSID and WPA WEK key and will link this way but still not printing. Sometimes, if I have two photosmart printers and f22437 as active printer (the f22437 indicates a network address in the Setup utility), but if I then select usb connected that he'll show my wifi network in the detectable window of the Setup utility. so I connect, but still it says unable to connect when I actually try and print.

  IM using a time capsule and wonder if the problem with that. the other day, he made up a window saying there was a problem with him and has the mac address this problem, which he seems to have done.

  help before I go crazy!

  OK... phew.

  all restarted. MacBook. router. modem. Time capsule.

  wireless printing now works again!

  Phew. and to think im sitting here alone to try to solve this problem in Switzerland where I live for six hours and her 02:35.

  in any case, Bravo to you chaps for your great suggestions.

• DeskJet 2540: cannot convert mac wireless usb printer

  Hello

  I'm having a problem setting my printer all-in-one Deskjet 2540 on my macbook (osx El Capitan). After basic implementation through usb connection, I was able to connect my printer to my router, which makes possible wireless printing. I was then able to print wireless from my phone using remote control all-in-one app.

  However, I now want my macbook to establish a wireless connection to the printer instead of the usb connection that is used for configuration. I can't find the option to convert a usb printer to a printer that is connected to the wifi. When disconnecting from usb, laptop computer notes the connection with the printer is lost. To install my printer, I use the HP Utility software, in which I can't find such an option. Also, when passing through Apple-> system-> printers and scanners preferences I can't find an option "convert to wireless. I also read a method via Finder-> applications-> HP and then an icon for installing the software & should be there? In my case, there is only the HP Utility icon which directs me to the same program in which I could not find the option.

  What I was looking for, and where can I find it?

  Might be a little exaggerated description, but I hope that this makes it extremely clear...

  Hi @Jeppie,

  Thank you for joining the HP Forums!

  I read your post about how you try to connect your HP Deskjet 2540 to your Mac using a Wi - Fi. I'm happy to help you!

  Please take a look at this video, install a printer in Mac OS X v10.11 El Capitan HP by using a network connectionand let me know what happens!

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope that solves your problem!

• Mac Book Pro and HP Envy 110F wireless printing problems

  I got my Mac book Pro for Christmas 2013 and initially had no problem printing wireless to my HP Envy 110F, but for some reason, I keep getting problems with printing to the envy of 110. We don't have printing problems with our Ipad for this printer.

  I can connect the printer to my Mac book Pro by putting 192.168.1.72 IP address in a web browser, but I get on the symbol bit offline when I print the urge. Last night I reinstalled the printer to print wireless on my mac pro book using a printer cable, which then worked well, but today the same problem reappeared.

  I'm starting to think that the problem may have started with the latest version of the update of the operating system to the Mavericks 10.9.4.

  All thoughts welcome.

  Hi @UKCheshire

  Since you are able to print from the iPad to the wireless printer, I suspect you have to something. I think that the question has something to do with the communication between the printer and the computer and not between the printer and the router. Please use the following document to solve the problem; "Printer is off-line" Message appears on the computer and the printer does not print: Mac OS X.

  If the problem persists, do not give up hope, let me know and we will work through it together.

• Want 5530, wireless, printing from a laptop Mac and Windows 7

  Hello

  I've just set up my new Envy 5530 wireless printer on my iMac (running Mac OS 10.9), I can print comes it very well, even from my iPhone / iPad. I also posted an e-mail to her address and that works very well, too.

  However, I also have a laptop HP ProBook 6455 b and I'd like to be able to print wirelessly, of him also. But this does not work, I'm unable to install the printer using the "Devices and printers" Wizard on Windows 7.

  I went to:

  Control Panel > hardware and sound > devices and printers > add a printer > add a network, wireless or Bluetooth printer. This printer is not found, even when it is on and the rest of my devices can see and print on it.

  Do I need to download and install the drivers for Windows 7 from hp.com? Or is there something that I am not making the invisible to my Windows 7 computer printer?

  Thanks in advance for your help,

  David G.

  Hi David G.,.

  I understand that you can not get the printer connected to your Windows laptop. You are on the right track, you need to download HP ENVY 5530 e-all-in-one of the printer drivers. Select your operating system, and then click the button "next". Scroll down and click on "Driver - Product Installation software. Click Printer series e-all-in-one HP Envy 5530 full feature software and driver. This should bring up the download page, click on the 'Download' button and I suggest saving it to your desktop and run the installation from there.

  I hope this helps, let me know.

  Thank you

• I've updated the Mac driver for the 8600 and direct wireless printing is no longer works. V5.9.1

  I've updated the Mac driver for the 8600 and direct wireless printing is no longer works. The HP utility is v5.9.1, Mac OS x 10.7. I did the software update and a new driver HP was part of the package. HP ePrint still works, and print tests are okay for General network settings are intact. None of the applications that use the print dialogue box standard and local networking make it through the print queue. Any tips? Any way to roll back a driver version? Or quickly get the next revision and hope printing works again? Thank you.

  Update: OSX-specific Version is 10.7.5, model of the printer is HP OfficeJet 8600. See you soon.

  Hello

  Try to reboot the router and check if that can help you.

  After connecting the back of the router, wait 30-60 seconds and restart the printer and Mac.

  If it persists, try resettign the system as follows:

  * Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.

  Click on the Apple menu and then click on System Preferences.
  Select Print & Scan.
  Right click (or Ctrl + click) your product with the Printers list in the left panel and then click on reset printing system.
  Click OK to confirm the reset.
  Type your user name and password.
  Click OK. The printing system resets.

  Now reconfigure the device by following the HP (under Utilities Applications\hewlett-Packard\Device) installation wizard.

  Please let me know if this can help,

  Shlomi

• What is the best wireless printer, I have an ipad and the mac pro with the lions

  What is the best wireless printer, I have an ipad & mac pro with the lions

  Hello

  According to your budget, any printer in this list may very well do the job:

  http://support.Apple.com/kb/ht4356

  Kind regards.

• Wireless printer does not

  my wireless printer has stop working with my macbook pro

  Without knowing more information try:

  Troubleshoot printer on your Mac - Apple Support

• Filtering addresses MAC wireless network configuration error

  Hello

  I got my printer (Deskjet 3510) some time ago and set up no problem for wireless printing. Yesterday, all of a sudden, it stopped connecting to the network. I have reset the wireless settings and ran the CD to re-establish the link. Now, when I get to all wireless to the top of the page it says «Filter error WiFi - hardware MAC address has been filtered out and do not < SSID >...» »

  I checked my router settings 2-wire AT & T (U-Verse) and address filtering MAC is not enabled. I did a scan and he picked up a bunch of MAC address and put them in the "Authorized" zone Is the MAC address of the printer. I tried enabling MAC address filtering, and it still does not connect. If at the moment I have the printer working via USB, MAC address filtering on the router go out but I still get the error. I have not changed the position of the printer or router as he worked. Not aware of any update of applied software.

  Any help would be greatly appreciated.

  The Mac address filtering error is one that is given for a multitude of errors, it is not very useful in this way.

  On the front of the printer, press the wireless button and go wireless by default.  Restart your router by pulling its plug momentarily, and then try again

• HP 4635 for mac: hp 4635 for mac wireless connection

  Reconnect the printer HP 4635 for mac wireless. The printer screen asking WPA/WEP. Do not have. Having the password wireless modem several SSID. Can not enter digital password on the printer screen. What I am doing wrong? Feel very incompetent as a printer connected easily several years ago

  Please help me to overcome this simple mental block.  Thank you

  John Margo

  Hello

  By entering the password, you must press the key several times to switch between its different characters, such as those used to type a SMS with mobile devices...

  for example, each press of the button 2 you place a, b, c, then 2.

  Kind regards

  Shlomi

• HP5740e all-in-one: Deputy HP5740e Print will not add wireless printer

  I recently had a problem where printing of pdf documents is out as unreadable solid ink lines. I have it narrowed down to only occurs with specific policies and only a reader of pdf special and only on my hp printer. I suspect that this was due to software updates, but I don't know if it's windows 10 updates or updates of adobe or some other updates. Now I just avoid using the fonts of the problem.

  In any case, an attempt to solve this problem, I decided to uninstall my 5740e hp software and reinstall the software in the hope of resolving the problem. Unfortunately, it has not fixed the issue but left us with a problem even more serious.

  Having resinstalled the software I couldn't add my printer as a printer wirelessly from the HP Print Wizard. He added fine as a usb printer and a web printer but not wireless.

  I added the printer wireless via the windows & Panel devices configuration printer OK. It prints wirelesslessly and via printing web so physical connectivity is very good.

  I really want that he recognized by the HP Print Wizard so that I can scan from the office.

  When I go to add the printer as a wireless printer, it detects the device OK showing its ip and mac, then goes on the installation of the printer and comes back with the unsuccessful installation of the device, and shows the red x between the router and the printer.

  Any ideas? It was working fine until I reinstalled the printer software.

  Another way to scan office without using the HP print wizard?

  All assistnce solve will be appreciated.

  Hi @Phlipper

  Can you try this program to uninstall Microsoft and then reinstall the software features FULL again?
  
  https://support.microsoft.com/en-us/help/17588/fix-problems-that-block-programs-from-being-installed...
  
  Let us know if it works!

• HP Officejet 4620 e-all-in-one stop wireless print whenever it is turned off

  My HP 4620 stop wireless print whenever it is turned off, although it is connected to the network (by the results of the test network wireless, pass & the quality of the signal is excellent).  No troubleshooting - HP Print & Scan Doctor work there is no help, I have to uninstall & reinstall the printer each time to be able to print wireless again.

  I use it on/on button to turn the printer off, don't disconnect not.

  Please help, or I need to return to the store, this is the third time!

  I also had the same issue and after a few game it seemed to have fixed so here's what I did... Hope this helps someone else.

  -My printer is connected to my wireless network.

  -On my computer that I'm connected to the printer through the IP address 192.168.1.153... (Yours may vary) in a browser

  * You can find the ip address printers on the control panel of the printers by pushing the wireless button and pushing the ok option 1, it should appear with the intensity of the signal and the ip address is at the bottom.

  -Once I was on the Printers page in my browser, I went to the tab network at the top.

  -Then to Internet Printing Protocol section (on the left in the advanced settings)

  -On my own PPI was already on, but the location was empty I put a '1' in the location box and then applied settings.

  -C' is the only thing that I changed and now my printer is asleep as always, but when I print something from my iphone, mac or pc it wakes up and prints as it is supposed to!

  BTW before I went to the printer via the browser. I changed layout sleep in 15 minutes via the Control Panel on the printer itself, don't know if it helped the issue or not because I still had the problem of sleep after I set the timer to 15 minutes instead of 5 min. But I solved my problem after performing the steps above!

  Also note that on the one hand some ppl on here say it's a network problem or a router! This is NOT the case I never even tried these roads and I solved my problem only by changing the setting of the printer! I have not set a static ip address or something like that!  The above steps is things ONLY I touched and my problem is SOLVED!

  Router: NETGEAR AT & T 7550 wireless router/dsl Modem

  -Security: WPA2-PSK (AES)

  -Printer connected to the router via WPS (push button configuration)

  Printer: HP Officejet 4620e all-in-one

  Computer: Apple iMac OS X Version (connected to the network via wifi) 10.7.5

  Dell running Windows 7 server (connected to the network via wifi)

  Apple iPhone 4S (connected to the network via wifi)

• Photosmart 7525: will analyze a computer wireless printer Photosmart 7525. error "not found any computer."

  My printer will not scan on my mac wireless computer. He says without a computer found. Ive tried uninstalling and reinstalling. I also made sure the airprint is not installed. I can scan from the computer to the wireless printer but not the printer to the computer. Ive tried all the steps in the troubleshooting.  Any help would be appreciated.

  Hello

  First of all, sorry for my English... I'm French... nobody's perfect...

  So, if you want to scan from your HP computer...

  On El Capitan, go to "system settings"...

  Go to security

  unchek: my security settings are set to "Mac App Store and identified developers."

  And chek: security settings have been set to "Anywhere".

  Removed all HP utilities and restarted first. Then reinstalled using the HP Easy Start and ensuring that the security settings have been set to "Anywhere".

  And... it worked fine... (scan to computer)...

• The HP DeskJet F4480 is set up for wireless printing?

  Hello

  When I bought my F4480, I thought it was a wireless printer.  I currently have a desktop Mac Power PC G4 running Tiger (10.4.11) and a computer laptop windows XP Pro running. The printer is connected via USB to a Mac, and I tried to set up printing wireless on the laptop. After several hours of trying, googling and looking for the manual, I finally decided to post here.

  Question 1 can we do? (if the answer is no, then "thank you" and I'll be on my way...)

  Question 2 in the affirmative and who have already installed the necessary drivers on my laptop, what is the next step?

  Sorry to be such a fool. Thanks in advance.

  Series F4400 (including your part done F4480) has USB connectivity only.  The series F4500 has USB and wireless.

  But, with the printer connected to your Mac, you can share printing works (but not scan) between the computers on your network.  To do this download and install Hello for Windows for your XP from here.  If your XP already has a version of Hello (installed by iTunes), uninstall before installing this version.

  Run it and it will find the printer connected to your Mac.  Make sure that your Mac is enabled and that it is set to never sleep (System Preferences > energy saver).