C4585 stopped print wirelesly All in one printr

Has been connected to my lap top via BT Home hub wireless link and work. Arrested and all the attempts of correction have failed, unit has taken over and replaced yesterday. Nations United installed all previuous software and tried to install. Wireless will not work. When you try to configure the network I get the error message #201 VSA or UDP port 427 is blocked due to firewall issues. Activated the firewall off but printer not found despite the message on the report of the wireless network test that said congratulations for the success to the top of your printer.

Laptop is Acer Extensa 5620ZG XP pro

I have connected to the printer via USB and everything works fine

My wireless works fine as I have an internet link through my BT home hub

I printed my HP network configuration page, and I have the IP address as 192.168.1.92

I ping that IP in the back and it times out

Now for the confusion, if I try and set up a new network and print my network settings wireless network SSID name is shown as the letters and numbers in my wireless network settings and letters BTHomeHub-then on the HP Network page. I am confused and getting very frustrated that my counter partners above does not work, but neither not binding its internet. It uses a HP w1907 desktop that worked very well and wireless printing yesterday. Did the same on his PC and get exactly the same results except for when I ping the wireless router, that it does not find even with an ethernet connection. Internet works with ethernet connection, but if I have IPCONFIG in Dos it just expires

Any help gratefully received

I wonder if your printer is not connected to the same network as your Acer laptop wireless?  Your Acer laptop, do you see other wireless networks?

In addition, the desktop internet connection does not work if you turn the printer off?

Tags: HP Printers

Similar Questions

  • Re - install the software for the printer C6280 all in one... get a "file not found" error message

    you need to reinstall the software for the printer c6280 all-in-one. Downloaded the last installation on HP web site package. During the installation process I get an error message... Unable to find user/appdata/local/temp/7z256315/setup/...setup/blocksysuser...

    the 7z256315 folder does not exist on the hard disk.

    I also have a message that it cannot find PS_A10_02_software.msi.

    Windows 7, C6280 printer all-in-one. Printer is connected to the router. The desktop computer is connected via an ethernet cable, the laptop/ipad/iphone/internet radio are connected via the wireless to the router.

    I hope you can help

    Thank you

    Charlie

    Hi cberistain,

    Follow the steps below and let me know what happens?

    First step: clear temp directory

    1. Type %temp% term or search programs and files of field
    2. Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
    3. Proceed to step 2 below

    Second step: downloaded and extracted to your system:

    1 download the drivers and full software features

    http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-77039-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 3645097 & sw_lang=.

    2. once the download is complete, double-click the file to extract the software.

    3. when the installation window opens, press the Cancel button to stop the installation

    4. tap folder in the race or search programs and files of field

    5. Locate and open the folder starting with 7z (example: 7zS2356)

    6. right click on the folder and select copy

    7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

    8 open the 7z, that you just copied on your desktop

    9 open the Util folder

    10 open the CCC folder

    11 start the uninstall_L4

    12. once the uninstall is complete, restart the computer

    13. run disk cleanup from the tools Accessories\ system under all programs folder

    14. download and install the latest version of Adobe flash player

    http://www.Adobe.com/support/flashplayer/downloads.html

    15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

    Let me know if you are able to successfully install the software and driver and are able to print and scan?

  • HP psc 1210 printer v all-in-one

    I'm missing a driver for my hp psc 1210 printer v all-in-one.

    I can't print from my desktop pc to Windows 7 on my printer.

    Printer works very well to plug into the wall for printer - will make copies just fine.

    Computer added my default printer - that part is fine.

    When I try to print from the computer to the printer, I get a message saying the printer is waiting for 1 document waiting to print, but it will not be printed.

    I tried to unplug the USB cable and plug it into another USB port, but it does not work either.

    Tried the Printing Troubleshooter?
    http://Windows.Microsoft.com/en-in/Windows7/open-the-printer-Troubleshooter
    If this does not help, try this procedure by Arthur Li [MSFT]:
    Clear printer spooler files and activate the Spooler Service
    =================================
    1. click on start, type "Services.msc" (without the quotes) in the search box and press ENTER.
    2. double-click on "Printer Spooler" in the Services list.
    3. click on stop, and then click OK.
    4. click on start, type "% WINDIR%\system32\spool\printers" in the search box and press ENTER, remove all files in this folder.
    5. click on start, type "Services.msc" (without the quotes) in the search box and press ENTER.
    6 double click on "Printer Spooler" in the Services list.
    7. click on start. In the Startup Type list, make sure that "Automatic" is selected and click OK.
  • What should I buy to re - install my printer Dell all-in-One A960 Windows 8 after Windows XP?

    My printer Dell all-in-One (purchases. 2004) has stopped working.  When you try to use, sign popped up "print spooler service does not work? This has happened a month after that I switched to Windows 8.  Dell said there is no software for this printer be re-installed Windows 8 and suggested that I buy a different printer.

    I don't think that Dell should have the last word.  Any advice?  Can I buy drivers, other software?

    Thanks for your information.

    I suggest to try this:

    (1) unplug the printer from the power point

    (2) connect one end of the USB cable to the printer (if it is not already connected)

    (3) connect the other end to the machine using any free USB port

    (4) turn the printer by plugging the power plug

    (5) look at the screen to see if Windows indicates all compatible drivers

    If this does not work then try to look for Windows7 or even Windows Vista drivers and then install. However, make sure that these drivers are from the DELL website if possible)

    Good luck and hope it works.

  • Installation printer A920 all-in-one

    I just bought a used, refurbished OptiPlex 755 PC with Win 7 OS and am trying to install my all-in-One A920 printer. This is the printer that came with (my Dell Dimension 2400 series) desktop I bought about 7 years ago. I downloaded and installed (or so I thought) a Vista 64 bit driver I've read on the Dell website is supposed to be compatible with my Windows 7 64-bit OS. I plugged my printer and opens the file. I thought it was going to guide me through the process of setting up, but he did not. My computer recognized my printer, and he let me even in the all-in-one program. I was able to scan a document in color (but it wouldn't let me save it), I was unable to copy or print documents, and the "empty cartridge" box came up saying that black inkjet cartridges and color were empty; they are not empty because I recently replaced both cartridges. I miss any step, or not to do something in the right order? The printer does not give me a lick of problems on my Dell PC with Windows XP. I don't want to have to buy another printer, if possible, any help you can give me would be appreciated! Thank you! p.s. I have not loaded MS word on my new computer, so I wonder if this has nothing to do with the printer does not. (??)

    monksplay,

    The procedure is listed below. The OCR program, found on the disc from the printer, is required for scanning documents and fax.

    First run, delete print jobs to eliminate any print job stuck in the queue.

    Unplug the printer.

    Download and run the patch (cleaning printer utility) until it prompts you to restart your computer.

    Restart your computer. Make sure that the printer is deleted. Driver Manual printer removal

    Download the 32-bit drivers for Vista for Windows 7 32-bit or 64-bit drivers for Windows 7 64 bit Vista. Install the Vista drivers in Vista compatibility mode, you will get a message, the printer is not connected. Connect the printer at the moment (power on).

    You will find links to the patch/drivers to...

    Owners of printer inkjet all-in-one Dell A920 thread (W7)

    Don't forget the programs anti-virus and firewall will block communications.

    In the digitization, if you have the disc that came with the printer, and then insert the floppy disk to the printer and keep it from running. Go to my computer and double-click it. Locate the drive that contains the disk Dell inside. Right-click on it, left click Explore. Find the folder of the OCR. In the OCR folder, there is a folder of Abbyy. Right click on setup.exe, which is located in the folder Abbyy and left, click Run as administrator. This will install the OCR program.

    Rick

  • HP Deskjet Ink Advantage 1515: stop the test page printed for all-in-one printer, HP Deskjet Ink Advantage 1515

    How can I stop my HP Deskjet Ink Advantage 1515 all-in-One printer to print a test page everytime I STARTED printing?

    Hello JoshSimon ,

    Welcome to the HP Forums.

    I see that you have a problem with the printer printing before you print a test page.

    If you turn off the printer at the end of the day, please do not.  Turn the printer on/off will result in printing a test page.  If you are concerned about the printer lost power, and that's why you stop, the unit actually built in sleep/stand mode that will kick in when you are not using the printer.

    Once a print job is sent to the printer it then wake up and do the task at hand.

    In addition, make sure you have the printer power cable connected directly to a wall outlet and not a bar/power strip. Here is a document that uses a LaserJet printer for example, but it is intended for HP products in general. Please click the link which explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.

    If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

    See you soon,.

  • color print, stopped my photosmart All in one printer c310. How should I do

    My printer has stopped printing in color

    Inke levels are varied but have green ticks

    HP All in one C310 Printer series

    Windows 7 64 bit

    Please check the ink levels... you use the original Hp cartridges? not charging?

    If they are authentic, not empty... can you pls. update your firmware: pls click the link:

    It's the last troubleshooting, if you replace your printhead still pending... I would like to know what happened

  • All-in-one Photosmart C310a: problem printing photosmart all-in-one C310a black ink

    Printer all-in-one Photosmart C310 just quit printing black ink cartridge.  I followed all the suggestions on help/support pages, including cleaning the contacts on the cartridge and print head (I do not soak the print head); making sure that nothing has been blocked; Unplug the printer for the moment came and reset; put in a new ink cartridge (the printer when it stopped printing in black, was still full of 1/3 to 1/2, according to the levels shown on the printer).

    It prints than a very altered, unreadable copy.

    I had this same problem about a year ago and find a solution on this web site, but cannot find anything about it now except for cleaning the heads, reset or to install a new cartridge.

    I tried to access this particular response from my old e-mail, but it is not related to whatever it is that has tackled the problem last year.  I desperately need this printer going again, please help.

    Thanks for CAhpUSER respondent

    I didn't really picture for help, but I will do my best to clarify what I can! This document 'Print head problem' or "Print head seems to be missing or corrupt" Message appears on the computer is some visuals that will make things clear with my explanation below!

    The part you are diving into the water is the ink nozzles. When the instructions say do not touch the ink nozzles, that means with the fingers/hands. It says to make sure that you use a fluffy towel/no paper to wipe the print head, so don't put fats from your contact with her skin. The electrical contacts are the part of the print faces head that looks like the back of the printer, just in some places grouped copper.

    I hope this helps clear things upwards a bit for you

  • Help!... PRINTER LEXMARK ALL-IN-ONE X 5650 WILL NOT PRINT MORE THAN ONE PAGE... Help! (READY TO BURN THIS * @# % ^ THING)

    THIS IS MY PROBLEM... IM RUNNING WINDOWS 7, I AM ABLE TO CONNECT THE PRINTER TO THE COMPUTER WITHOUT PROBLEM. IF I TRY TO PRINT OR COPY ONLY ONE PAGE AT A TIME MOER THE PRINTER WILL RESTART AFTER THE FIRST PAGE HAS FINISHED PRINTING. I ALSO NOTICED THAT THE PRINTER DOESN'T IS NOT DISPLAY INK CORRECT LEVEL ON THE SCREEN OF THE PRINTER, (BLACK INK INK DIRECT 0% 0%) BUT IF I CHECK THE LEVEL THROUGH THE PREFERENCES OF COMPUTER PRINTER IT SHOWS THAT THE BLACK INK IS USED MORE OF THE COLOR INK. (BLACK INK INK 75%-100%). THE QULITY IMPRESSION IS POOR TO MUCH GREEN... ALSO WHEN I CANCEL THE JOB IN THE MIDDEL OF A PRINT JOB IT ALSO RESTARTS. I LAUNCHED A PRINT OF THE COMPUTER TEST PAGE AND IT PRINTS OUT THERE BUT WHEN ITS DONE WITH THE FIRST IMPRESSION AGIN RESTART ANOTHER. AND THE SAME FOR ALL "CARTRIDGES CLEAN CARTRIDGES-ALINGN" THE ONLY THING THAT WORKS WELL IS THE SCANNER... WHEN I PRINT A TEST PAGE TO THE PRINTER, I SEE A MESSAGE 'BAD CHIP HEATING' CAN THIS BE THE CAUSE OF ALL MY PROBLEMS, OTHERWISE THAT MEANS...

    HELP.............................. HELP.................................... HELP.......................

    ......................................... WHERES MY GAS AND A LIGHTER...

    Hi MTCAIME,

    ·         If it works well before? Do you remember any recent software and hardware changes made on your computer?

    1. I even suggest to run the troubleshooter under construction, link, you can refer to the same thing: Open the printer Troubleshooter: http://windows.microsoft.com/en-us/windows7/Open-the-Printer-troubleshooter

    2. make sure that the printer spooler is set to automatic, steps to set the service to automatic

    i. click on start and type services.msc in the search box

    II. search for the Printer Spooler service

    III. right-click on the service

    IV. If the service is stopped and then starts the service

    v. Select Properties

    VI. and in startup type, select automatic

    3 uninstall the driver and related software and reinstall it back. To uninstall, see the link below: Uninstall or change a program: http://windows.microsoft.com/en-US/windows7/Uninstall-or-change-a-program

    Link for the drivers from the Lexmark Web site: http://support.lexmark.com/index?locale=en&productCode=LEXMARK_X5650&userlocale=EN_US&segment=DOWNLOAD&os=WINDOWS_7&page=downloadsList&oslocale=en_US#4

    Thank you, and in what concerns:

    Samhrutha G S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Internet printing using dell V505 printer problems all in one

    have dell V505 printer all-in-one. Some print orders follow completely, some don't at all, some printing course and stop all of NET applications. Whats up how much - what I do

    OT: printing problems

    Hi Judy,.

    Thanks for posting in the Microsoft community

    From your problem description, I understand that you are not able to get some tracking of print through completely controls. Please let me know if you do not experience this problem.

    What web browser do you use?

    I suggest you try the following

    Method 1: Some webpages specify exactly where text should print on the page. If the Web page you're printing specifies exactly where the text should print, Shrink To Fit will not work. You work around this problem by setting a custom preview before print scale factor. For more information about print preview, see
    http://Windows.Microsoft.com/en-us/Internet-Explorer/print-webpages#IE=IE-9

    Method 2: Open the printer Troubleshooter
    http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter


    Method 3:
    we will try to uninstall the drivers for the printer from the computer.


    Find and install printer drivers

    http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

    http://www.Dell.com/support/drivers/us/en/04/product/Dell-V505

    See also the links: Printing webpages: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows7/printing-webpages-frequently-asked-questions

    Why can I not print?
    http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

    Hope this information is helpful and let us know if you need help with Windows in the future. We will be happy to help.

  • HP Officejet 5740 e-All-In-One: multiple frustrations with printer e-all-in-one-hp officejet 5740.

    I have a HP Officejet 5740-e all-in-one that has all sorts of problems: periodically decides not to print documents from one of my laptops HP or Lenovo.  Do not accept ink cartridges HP Instant ink or HP ink cartridges purchased in a store.  Unable to get decent support for this HP product.  Is essentially a disposable item now?

    As far as I know that there is no user replaceable parts in these lower end home use printers. So if nine ink cartridges do not work, and seeing that the cost of the printer is less than $ 100, Yes... it's basically a Jet printer away. Wish I had better news for you.

  • to re-enable the printer hp all-in-one

    I accidentally deleted my all-in-one printer to my computer by pressing the wrong button.

    How to re-enable the device plse?

    The printer in question is hp all-in-one deskjet 2050 J510 series.

    I also use Windows 8.1

    Kindly give me easy step by step instructions as I am that an old age pension at retirement cvil servant and slow on the uptake at my age.

    Thank you very much.

    JoeBuzu

    Here is a link to the complete software.

  • Total number of pages printed on printer e-all-in-one-hp officejet 6700 premium do not match

    Printer model: hp officejet 6700 premium e-all-in-one

    OS: windows xp, service pack 3

    Method of connection: network

    Description of the problem: number of page do not match

    If I double click on the "hp officejet 6700" icon on my desktop.

    Then click on "view the ink level.

    Then click on the reports of the device"" tab.

    Then click on "check printing.

    The report provides: Total number of printed Pages 8159

    If I double click on the "hp officejet 6700" icon on my desktop.

    Then click on "view the ink level.

    Then click on the "devices" tab

    Then click on "printer ews home page."

    Then click on the 'Tools' tab, I see:

    Total number of pages

    6725

    Difference = 8159-6725 = 1434

    Can someone tell me why these numbers are different? They represent different totals?

    MelanieHello and welcome to the Forums of HP, I hope you enjoy your experience!

    I see that you have questions about your number of pages.  I would like to help.

    The built-in web server does not account for pages printed not across the network.  The number of printer pages all the elements. 1434 pages were not printed through the network, therefore, not counted in the SAP.

    Please let me know if you have any questions.  Thanks for posting on the HP Forums!

  • HP Officejet 7612 large Format: Printer e-all-in-one-HP Officejet 7612 large Format printing paper selections not available in the printer dialog box

    Using Adobe Acrobat Reader DC to print the PDF to your computer. Print dialog box displays all the options paper size whatever the configuration by default or the selection of the paper size in the printer configuration. 11 x 17 paper in the printer and configured by default. Only four options are available: letter, legal, A4, and Executive. Nothing is wider than 8.5 "is available, and this so-called parameters up to 13 X 19 printer.

    Hello

    Thank you for using the HP forum.

    You can download and install the software COMPLETE features of HP printing for your operating system:

    http://support.HP.com/SG-en/drivers/selfservice/HP-OfficeJet-7610-wide-format-e-all-in-one-series/5153788/model/6879040#Z7_3054ICK0K8UDA0AQC11TA930O2

    Please select the appropriate operating system.

    Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

    The desired print sizes should be there.

    Hope that helps.

  • Printer C4750 all-in-one: do I have to uninstall a driver?

    Hey guys, I now work a new installation and insntalled only driver ' base' for my printer HP Photosmart C4750 all-in-one in this case:

    http://support.HP.com/us-en/drivers/selfservice/HP-Photosmart-C4700-all-in-one-printer-series/379461...

    My only problem now is, I can not adjust the "Volume of ink" to make ink last longer, and the default settings are really black for everyday use.

    The Question:

    Do I need to uninstall the driver of the course 'basic' to install the "all-in-one HP Photosmart C4700 Printer series full feature software and driver" here:

    http://support.HP.com/us-en/drivers/selfservice/HP-Photosmart-C4700-all-in-one-printer-series/379461...

    Thank you, pcpunk

    Hello

    Without unless it calls for.

    Kind regards.

Maybe you are looking for