C5180 printer requires the original cartridge

Similar Questions

• DeskJet 5500: When the printer uses the 57 cartridge?

  I thank very you much for your reply to my last post. Makes perfect sense.

  I'm doing a huge amount of B & W / grey scale printing; I use 56 about two cartridges a week and I reload them successfully for a few tens of cycles each.

  My 57 cartridges also mpty very frequently while I print almost any color - the only color is perhaps a small logo on the page.

  I tried to use the gray filter in Macintosh 10.4.11 system to send a grayscale image to the printer, but the 57 cartridge still empty quickly, even if the printed color is negligible.

  If the page still contains the least amount of color, 57 cartridge automatically prints the whole page, or the cartridge 56 prints black and the 57 print the little bit of color?

  If the 57 prints the whole page if it contains ANY color, is there anything I can do in the impression of New York to get the printer to use the cartridge 56 instead? I took to remove the cartridge 57, but when I put again, the printer goes through the cycle of test page, I want to avoid if I can.

  Thanlk in advance for your help.  I can't tell you how much it means for a user that a knowledgeable HP employee has actually answered questions through this forum. Other companies to let users themselves, often to hang in the wind without usable responses.

  Many use printers, not only HP, so-called 'underprinting' this is the pose of an ink of color on the page before the black ink.  Essentially, it is a primer for the paper.  The color dries quickly and is a base for black ink, allowing it to dry and cure without spreading out on the page.  If you have already printed with the cartridges out of alignment and saw a blue or magenta shadow to your text, you see the underprinting.  That's why, when the same printing black text, the printer uses a color ink.

  This printer is able to print reserve mode, which means it can print with 1 single cartridge installed.  The printing speed may be slower, but it's an easy way to make sure you are not using any color.  For reserve mode, remove the cartridge you want to use.  (Find a hermetic place to store this vertical cartridge with the nozzles pointing down as it is when it is installed in the printer, or it will dry out and become useless!)  To leave the reserve mode, put a good cart in the empty slot.

• HP Office 6100: Print with the color cartridges or exhausted?

  Hi, I recently bought a printer, but the color cartridges are empty.

  Is it possible to print in black & white, then they are showing email...

  Either by removing disable them them or the software must have color available, even if only need black & white document printing...

  Thank you

  Hello

  Need ink for the printer to use, to ensure that the functionality of the system and avoid the clogging of the print head.

  You must replace any empty color printing as listed in the following document:

  http://support.HP.com/us-en/document/c04331666

  Shlomi

• Photosmart 5510 requires the color cartridge to print in black

  I have an Imac running MAC OS X 10.7.5 and a HP Photosmart 5510.

  I can't select a black and white printing other than "regular, fast rough, black and white paper.

  QUESTION: Why are there no "plain paper, best option, black and white"? Or should I ask, where is the ordinary paper, the best black and whitee option?

  Surely each printer must be able to print the last option.

  To satisfy my need for a good level of black and white print that I have to use the color cartridges - it is expensive.

  I would be grateful for any help.

  Thank you.

  To print graphics or the text of quality 'Best' the printer uses color ink.  In the case of text, the color ink is printed black to improve the darkness and roughness of the edge.  (Color ink makes printing 'together' more quickly, reducing the purge on the edges).

  For graphics, the printer uses drops color printing black or gray printing mode best because it gives much better graphics.  The color ink droplets are much smaller than the black.  When the color ink is used for printing in grayscale or B & W graphics, the results are much thinner that the result would be in black ink only.

  If the quality does not matter (much) draft mode provides the best economy, but for a better print quality, color ink is necessary.

• DeskJet 2132: Do not print with the new cartridge

  I bought this printer only about a month. I've exhausted the original black ink cartridge, so I bought a new one (genuine HP 63XL).

  I installed the new cartridge and the alignment page is printed, but only the parts of printing color, no black. I tried to print a test page, once again, not black. The ink level software shows that the new cartridge is full.

  I tried to put back the cartridge several times and made sure the protective film is removed completelu.

  I tried to remove the new cartridge to print mode single cartridge. The test page comes out fine; but, when I try to print a document in this way, the printer WILL NOT PRINT AT ALL. There is a little red light next to the black point near the power button.

  HI @saking88,

  Welcome to the Forums of HP Support!

  I see that you are unable to print black on your printer HP Deskjet 2132. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  It seems that there is a problem with the cartridge of the printer or print. This document should help you determine the cause. Please, try the steps in the guide below, to see if we can get the impression in black again for you.

  HP DeskJet printers 2130 - color or black ink print do not.

  This document is for HP DeskJet 2130, 2132, 2134, printers all-in-one Deskjet Ink Advantage 2135 2136 and 2138.

• Photos do not print in the original proportions

  Parameters of the photo library

  When I opened the Windows Photo Gallery and send a picture to copy on my printer, copies are elongated. I thought it was the printer, but a new printer does the same thing, so my Gallery settings are wrong somehow. I unchecked the adjustment to the page, but it did not help. I can't find a setting to keep the original proportions. Print very well typed documents. Where can I find this setting or the problem? Thanks in advance!

  This would be your choice if you want to update
  Windows Live Photo Gallery, but there's a chance
  only the printing problem can be improved.

  If you want to give it a try... See the following link:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Windows Live Photo Gallery 2011
  http://explore.live.com/Windows-Live-Photo-Gallery?OS=other
  (There are other applications included in the download...
  Uncheck the ones you do not want to install)

• HP7520 printer using the photo cartridge during the printing of the documents not General and black print cartridge

  My 7520 printer uses the photo and not the General black cartridge when printing on plain paper documents. The black general still full but my photo cartridge runs out of ink.

  Hi shay!

  My apologies, I didn't know that your prints come out in blue print when you have a totally black cartridge. It is a problem of print quality with the printer or something in the settings of your computer.

  I suggest to try the steps in the guide below. You have already tried some troubleshooting, try so the steps that you have not yet tried, I understand:

  The streaks of ink fixing, faded prints and other common print quality problems

  If you're still only able to print in blue (no black print), so I recommend you call HP to let them know. As you mentioned you have only had the camera for 3 months, it is likely under warranty and you might need a spare part or unit.

  Here are the details of HP:

  If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.

  I hope this problem is solved for you, have a wonderful Wednesday

• Uneven printing with the new cartridge

  I have a Color LaserJet 2605dn printer and have just replaced the magenta cartridge - previous leaked toner in the printer.

  The new cartridge does not print evenly.  It is the color at the center of the page, gradually fading to almost nothing on both sides.  I printed several pages and gave the cartridge a series or shake well, nothing helps.  The other cartridges are more than half full and print perfectly.

  This suggests a problem with the new cartridge?  Or is there anything else I can try?

  Thank you.

  See attachment.  Not for the faint at heart.

• 3210 all-in-one - cannot print with the black cartridge with 2 empty color cartridges

  have 2 empty color cartridges - and print in black only (up to get the new cartridges) - any ideas?

  Brigadoon wrote:
  have 2 empty color cartridges - and print in black only (up to get the new cartridges) - any ideas?

  The Photosmart 3210 printhead a permanent.  You will need to have available in any color ink not to damage the print head.  Your only option is to get the refill for empty ink cartridges.

• Photos are not print with the photo cartridge

  Hello

  I have a Photosmart e 7510 and am trying to print photos.  I have installed HP Premium paper and HP Photo cartridge installed.  When I print the photos that are green - I printed both a progress report and a report of print quality and the cartridge photo is full but the magenta is empty.  It seems to me that the photos are print with regular color cartridges and not the photo cartridge.  Or photos using all the cartridges?  I correctly on all the printer settings and chose to 'better' than the quality of the photo.

  Any help is appreciated...

  The photo cartridge is just black photo, which is used to improve the nuances of black and colors in a photo. When photos are printed colours would be used to create the best possible performance. I could replace the magenta cartridge and printing resumes and see if that solves the Green tinting the problem you are currently experiencing. I hope this helps.

• HP 4480 print with the color cartridge only.

  The all-in-one Deskjet printer copied a page and printed it happened to be all black text, and I did the copy without using the computer.  When I tried to do the same thing with the second page, only a small symbol of color in this page appeared on the paper.  I tried a new black cartridge, without result; the alignment sheet was only the blue rectangles and an arrow pink.  I tried to clean the printer heads and saw only the colored rectangles, not blacks, on the test page.

  There are a few spots on a page where the ink is gray instead of black, but everything is readable.  Maybe I soaked too long cartridge.

• cp4280 printer displays the message: cartridge print (s) missing or not detected

  I have a CP4280 printer all in one.

  He missed the color and black ink.

  I started to see this message: "missing or undetected print cartridges.

  I replaced black ink only, because I don't want to buy or use the color.

  I remember every day that I'm in simple Mode of cartridge but my printer of shit does not seem to acknowledge this fact.

  I don't have a problem printing the pages, but I can't scan anything because the error message is there.

  In addition to the purchase of a color cartridge, how can I get rid of this message?

  Is there another way to analyze the elements, like some crappy hp software?

  I adjusted used Hp Photosmart Essential 3.5, click Import, and then select scanner

  I was able to use the scanner in this way

• How can I identify the original cartridge? What is the warranty on the new cartridge?

  Dear Sir.

  I buy a new cartridge No. 21 last month. now it does not. Please tell me where it will replace in haryana.

  I am including a link which explain the Hp warranty on its ink below.  I am also including a link that will help you identify the genuine Hp ink cartridges.

  HP warranty

  Authentic Hp inks

• Without of ink original cartridges for printer put in place

  My daughter is a teacher and received an officejet 4620 community agency that helps teachers. There is no ink in the box, so she bought a black cartridge and the package of three in a color (#564). However, she then discovered that the printer has never been setup, error message so he said he could only be implemented with the original cartridges. It will be impossible because she doesn't know who donated the printer or where the original cartridges could be. Is this in any way about this? The whole HP page said that it was necessary to have the originals.

  Thanks for the help... I was on the phone with tech support for an hour. It was very useful, but the printer must have the cartridges that came with the printer to set up. Even new certified cartridges do not work until it is implemented. Very disappointing since my daughter was so excited to get a printer that she couldn't really afford. HP gave me a part of half price on their new printer that uses the same cartridges, so I took it.

• HP 2050 does not accept the hp original cartridge recommended

  Hello! My HP deskjet 2050 all-in-one works very well under windows xp professional until the cartridge ran out of ink. As advised I bought an original HP 301 cartridge but the printer always tells me that the cartridge is not usable in the current configuration?

  As I need the printer, I hope you can help... Thank you!

  You are welcome.

  When you call HP, you must have with you:

  1. A complete set of in the cartridges of the warranty for your current region.
  2. Your printer.
  3. The computer connected to your printer.

  As long as the printer or the ink cartridges are under warranty, there should be no charge.

  In the United States, you can call 1.800.474.6836.  Find from other telephone numbers see Contact HP worldwide.  Do you have a good weekend.

  Good luck!